Re: [sigrok-devel] Using Saleae Logic 16 clone with PulseView

[Federico C. <fed...@ce...>]

Hello,
You need the firmware for the Cypress IC inside your device.
Take a look at this wiki page:
https://sigrok.org/wiki/Mcupro_Logic16_clone
In the above page there is a link to pre built binaries

Additional information on the firmware itself:
https://sigrok.org/wiki/Fx2lafw

Best Regards

On 2020-01-05 16:08, Dmitry Katsubo via sigrok-devel wrote:
> Dear Sigrok develoeprs,
> 
> I would like to use latest PulseView v0.4.1 with this Saleae Logic 16
> clone [1] (looks exactly the same as "black" mod on page Noname
> XL-LOGIC16-100M [2]).
> 
> I have downloaded drivers from Saleae website [3] and installed them.
> After that when I select "Saleae Logic 16" from driver list and press
> "Scan for devices", PulseViewis is able to detect Saleae Logic16:
> 
> Unfortunately when I press OK, it shows the error "Failed to open
> device. generic/unspecified error":
> 
> Is there any chance to make it working?
> 
> Thanks in advance!
> 
> --
> With best regards,
> Dmitry
> 
> 
> Links:
> ------
> [1] https://www.aliexpress.com/item/32613420798.html?
> [2] https://sigrok.org/wiki/Noname_XL-LOGIC16-100M
> [3] 
> https://downloads.saleae.com/logic/1.2.29/Logic+1.2.29+Win+64+Standalone.zip
> _______________________________________________
> sigrok-devel mailing list
> sig...@li...
> https://lists.sourceforge.net/lists/listinfo/sigrok-devel

-- 
Federico Cerutti