RE: [Shorewall-users] Shorewall/OpenVPN issue

[Werner vd M. <we...@sa...>]

Did you try to pass any traffic over the Bridged VPN connection after
reset the counters at 17:01:46?

I have tried again yes, even tcpdump on interface tap0 returns nothing
coming from outside. From the server it does an ARP call, but gets nothing
back.


I *do* notice however that you have a 'tap1' device so check your
OpenVPN server configuration file -- you should have "dev tap0"; it
looks like you may have "dev tap" which causes the OpenVPN server to
create a second tap device rather that to use the one that you have
configured on the bridge. That would be consistent with your not seeing
any traffic on br0.

The tap1 is a remnant of an earlier test, that interface does not show up
with an ifconfig, restarted the box to ensure clean config.

Also, what is 'eth0'? I see traffic being passed on it and it has an IP
configuration so it may need to be included in your interfaces file with a
zone defined for it.

My connection is an ADSL connection, apologies for emitting that, eth0 is
connected to the ADSL modem.

I have rebooted the box, and now logging seems to work.

Now at least I have logs to work off!
Thanks for your help so far - I will investigate the logs and let you know -
hopefully I can come right from here.

Kind regards
Werner


-- 
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.392 / Virus Database: 268.5.3/331 - Release Date: 2006/05/03