Re: [Sguil-users] Sguil client install on CentOS 6.3

[Jeremy H. <jt...@gm...>]

Also, to answer the installed packages question..

from EPEL I have:

itcl.x86_64                            3.4-6.el6                        @epel
itk.x86_64                             3.4-5.el6                        @epel
iwidgets.noarch                        4.0.2-4.el6                      @epel
tcllib.noarch                          1.11.1-3.el6                     @epel

everything else is base, updates or the DVD.




On Wed, Jan 30, 2013 at 10:59 PM, Jeremy Hoel <jt...@gm...> wrote:
> Ok.. I just setup my clean workstatin and tested it out..   I  updated
> the EPEL rpm install and then tcllib and iwidgets installed from yum
> ok.
>
>
> And from clean install on the workstation to working.. I get the login
> prompt, no errors.
>
> Try the EPEL repo and the extra parts from that
>
>
> cd /usr/src/
> wget http://downloads.sourceforge.net/project/sguil/sguil/sguil-0.8.0/sguil-0.8.0.tar.gz
> tar -xzvf sguil-0.8.0.tar.gz
>
> rpm -ivh http://ftp.linux.ncsu.edu/pub/epel/6/i386/epel-release-6-8.noarch.rpm
> yum -y install tcllib
>
>
> cd /usr/src
> yum -y install tcl-devel openssl-devel
> wget http://downloads.sourceforge.net/project/tls/tls/1.6/tls1.6-src.tar.gz
> tar -xzvf tls1.6-src.tar.gz
> cd tls1.6
> ./configure --with-tcl=/usr/lib64 --with-tclinclude=/usr/include
> make
> make install
> ln -s /usr/lib/tls1.6 /usr/lib64/tcl8.5/tls1.6
> chmod 755 /usr/lib/tls1.6
>
> yum -y install tclx tk iwidgets
> cp -R /usr/src/sguil-0.8.0/client /opt/sguil-client
> find /opt/sguil-client -type d -exec chmod 775 "{}" \;
> find /opt/sguil-client -type f -exec chmod 664 "{}" \;
> chmod 775 /opt/sguil-client/sguil.tk
>
>
> cd /opt/sguil-client/
> wish ./sguil.tk
>
> On Wed, Jan 30, 2013 at 10:40 PM, Kimi Ushida <kim...@gm...> wrote:
>> I wasn't able to yum iwidgets down which is why I directly RPMed it from the
>> repo.  tclx and tk are in my first yum request.
>>
>> Maybe you could send over a list of the RPMs installed on your working
>> system and I could do a compare against mine?
>>
>>
>>
>>
>> On Wed, Jan 30, 2013 at 9:05 PM, Jeremy Hoel <jt...@gm...> wrote:
>>>
>>> Your yum install part misses this..
>>>
>>> yum -y install tclx tk iwidgets
>>>
>>> It was down lower in the script.
>>>
>>> On Jan 30, 2013 9:32 PM, "Kimi Ushida" <kim...@gm...> wrote:
>>>>
>>>> I finally got a chance to try this and I think I've come pretty close,
>>>> but the client still won't fully run.  If I try the following as root:
>>>>
>>>> /usr/bin/wish /opt/sguil-client/sguil.tk
>>>>
>>>> I get the "cannot fine the Iwidgets extension" error which points me to
>>>> www.tcltk.com/iwidgets (looks like the domain serves another purpose now).
>>>>
>>>> After a fresh install of CentOS 6.3 (x86_64), I ran:
>>>>
>>>> yum -y install gcc tcl-devel openssl-devel tclx tk glibc.i686 libX11.i686
>>>>
>>>> rpm -ivh
>>>> http://dl.fedoraproject.org/pub/epel/6/i386/epel-release-6-8.noarch.rpm
>>>> rpm -ivh
>>>> http://dl.fedoraproject.org/pub/epel/6/i386/tcllib-1.11.1-3.el6.noarch.rpm
>>>> rpm -ivh
>>>> http://dl.fedoraproject.org/pub/epel/6/i386/itcl-3.4-6.el6.i686.rpm
>>>> rpm -ivh
>>>> http://dl.fedoraproject.org/pub/epel/6/i386/itk-3.4-5.el6.i686.rpm
>>>> rpm -ivh
>>>> http://dl.fedoraproject.org/pub/epel/6/i386/iwidgets-4.0.2-4.el6.noarch.rpm
>>>>
>>>> wget
>>>> http://downloads.sourceforge.net/project/tls/tls/1.6/tls1.6-src.tar.gz
>>>>
>>>> tar xzvf tls1.6-src.tar.gz
>>>>
>>>>  cd tls1.6
>>>>
>>>>  ./configure --with-tcl=/usr/lib64 --with-tclinclude=/usr/include
>>>>
>>>>  make
>>>>
>>>>  make install
>>>>
>>>>  ln -s /usr/lib/tls1.6 /usr/lib64/tcl8.5/tls1.6
>>>>
>>>> cd /usr/src
>>>>
>>>> wget
>>>> http://downloads.sourceforge.net/project/sguil/sguil/sguil-0.8.0/sguil-0.8.0.tar.gz
>>>>
>>>> tar xzvf sguil-0.8.0.tar.gz
>>>>
>>>> cp -R /usr/src/sguil-0.8.0/client /opt/sguil-client
>>>>
>>>>  find /opt/sguil-client -type d -exec chmod 775 "{}" \;
>>>>
>>>>  find /opt/sguil-client -type f -exec chmod 664 "{}" \;
>>>>
>>>>  chmod 775 /opt/sguil-client/sguil.tk
>>>>
>>>>
>>>> If I rpm -qa and grep for tcl, I have:
>>>>
>>>> tclx-8.4.0-15.el6.x86_64
>>>> itcl-3.4-6.el6.i686
>>>> tcl-8.5.7-6.el6.x86_64
>>>> tcllib-1.11.1-3.el6.noarch
>>>> tcl-devel-8.5.7-6..el6.x86_64
>>>>
>>>> Isn't TCL 8.5 supposed to be an issue with Sguil?  However, you seem to
>>>> have success with it so I'm not sure where to look next.  Any insight is
>>>> appreciated.
>>>>
>>>> Kimi
>>>>
>>>>
>>>>
>>>> On Sun, Jan 20, 2013 at 1:39 PM, Jeremy Hoel <jt...@gm...> wrote:
>>>>>
>>>>> This is the script we had been using on our CantOS 6 installs.  it
>>>>> installs the client into opt and you might want to check the EPEL
>>>>> file, since it's probably out of date.  This also sits on top of our
>>>>> normal workstation build.. so there is a chance that we already
>>>>> installed a depdnancy that you might need.. but this gets sguil
>>>>> installed for the cleint.
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> Client Setup
>>>>>
>>>>>     Server is at <SGUILDB Server IP> and port is default 7734
>>>>>     To setup a user account for sguil, from the server run
>>>>>
>>>>>     /usr/local/sguil/sguild -adduser  < username >
>>>>>
>>>>> Linux
>>>>>
>>>>>     If you don't have the sguil source already downloaded perform the
>>>>> following
>>>>>
>>>>>     cd /usr/src/
>>>>>     wget
>>>>> http://downloads.sourceforge.net/project/sguil/sguil/sguil-0.8.0/sguil-0.8.0.tar.gz
>>>>>     tar -xzvf sguil-0.8.0.tar.gz
>>>>>
>>>>>     Install tcllib. This also adds the EPEL repo.
>>>>>
>>>>>     rpm -ivh
>>>>> http://download.fedora.redhat.com/pub/epel/6/i386/epel-release-6-5.noarch.rpm
>>>>>     yum -y install tcllib
>>>>>
>>>>>     OpenSSL TCL is required
>>>>>
>>>>>     cd /usr/src
>>>>>     yum -y install tcl-devel openssl-devel
>>>>>     wget
>>>>> http://downloads.sourceforge.net/project/tls/tls/1.6/tls1.6-src.tar.gz
>>>>>     tar -xzvf tls1.6-src.tar.gz
>>>>>     cd tls1.6
>>>>>     ./configure --with-tcl=/usr/lib64 --with-tclinclude=/usr/include
>>>>>     make
>>>>>     make install
>>>>>     ln -s /usr/lib/tls1.6 /usr/lib64/tcl8.5/tls1.6    # Only do this
>>>>> if you are x86_64
>>>>>     chmod 755 /usr/lib/tls1.6
>>>>>
>>>>>     If you already have the source
>>>>>
>>>>>     yum -y install tclx tk iwidgets
>>>>>     cp -R /usr/src/sguil-0.8.0/client /opt/sguil-client
>>>>>     find /opt/sguil-client -type d -exec chmod 775 "{}" \;
>>>>>     find /opt/sguil-client -type f -exec chmod 664 "{}" \;
>>>>>     chmod 775 /opt/sguil-client/sguil.tk
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Sun, Jan 20, 2013 at 4:06 AM, Kimi Ushida <kim...@gm...>
>>>>> wrote:
>>>>> > Hi everyone,
>>>>> >
>>>>> > This is my first post to this list and I apologize if this has been
>>>>> > answered
>>>>> > before but I haven't seen a thread regarding it yet.
>>>>> >
>>>>> > Does anyone have any specific instructions on getting the Sguil client
>>>>> > (not
>>>>> > the server) running on Red Hat Enterprise / CentOS 6.3 and the
>>>>> > specific
>>>>> > packages required on a base minimally-installed OS?  One of the
>>>>> > environments
>>>>> > that I work in has standardized on CentOS 6.3 and I'd like to maintain
>>>>> > this
>>>>> > consistency if possible.  I've seen some documentation, blogs, and
>>>>> > other
>>>>> > articles online but they all seem to be geared for server installs and
>>>>> > the
>>>>> > client install guides tend to regard other distros (Ubuntu, etc.).
>>>>> >
>>>>> > I'd appreciate any pointers.
>>>>> >
>>>>> > Thanks,
>>>>> >
>>>>> > Kimi
>>>>> >
>>>>> >
>>>>> >
>>>>
>>>>
>>>
>>
>>
>> ------------------------------------------------------------------------------
>> Everyone hates slow websites. So do we.
>> Make your web apps faster with AppDynamics
>> Download AppDynamics Lite for free today:
>> http://p.sf.net/sfu/appdyn_d2d_jan
>> _______________________________________________
>> Sguil-users mailing list
>> Sgu...@li...
>> https://lists.sourceforge.net/lists/listinfo/sguil-users
>>