Re: Solaris8 compiling problem : ld: fatal: library -ldl: not found
Brought to you by:
set
Menu
▾
▴
Re: Solaris8 compiling problem : ld: fatal: library -ldl: not found
|
From: Salvador E. T. <sal...@in...> - 2006-12-18 13:43:47
|
On 15/12/06 15:12, Yannick Mercier wrote:
> I give a try to editor.exe located in the makes directory
> and I dont have the ELF error, but there is nothing happening,
Are you running in a regular console or using X?
> I used
> the truss utility to see what it is doing and here is the output :
>
> root > truss ./editor.exe
> execve("editor.exe", 0xFFBEFA04, 0xFFBEFA0C) argc = 1
> resolvepath("/usr/lib/ld.so.1", "/usr/lib/ld.so.1", 1023) = 16
> open("/var/ld/ld.config", O_RDONLY) Err#2 ENOENT
> stat("/lib/librhtv.so.2.0.3", 0xFFBEF2E8) Err#2 ENOENT
Note that 2.0.3 is the stable release (needed for 0.5.4) but is a little
bit old.
> stat("/usr/lib/librhtv.so.2.0.3", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/local/ssl/lib/librhtv.so.2.0.3", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/local/lib/librhtv.so.2.0.3", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/ccs/lib/librhtv.so.2.0.3", 0xFFBEF2E8) Err#2 ENOENT
> stat("/export/home/ymercier/setedit/setedit/contrib/tvision/makes/librhtv.so.2.0.3",
> 0xFFBEF2E8) = 0
> resolvepath("/export/home/ymercier/setedit/setedit/contrib/tvision/makes/librhtv.so.2.0.3",
> "/export/home/ymercier/setedit/setedit/contrib/tvision/makes/librhtv.so.2.0.3",
> 1023) = 76
> open("/export/home/ymercier/setedit/setedit/contrib/tvision/makes/librhtv.so.2.0.3",
> O_RDONLY) = 3
Ok, librhtv loaded.
> mmap(0x00000000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
> 0xFF390000
> mmap(0x08EF9CE8, 942080, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF280000
> mmap(0xFF280000, 693703, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED,
> 3, 0) = 0xFF280000
> mmap(0xFF338000, 173360, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 688128) = 0xFF338000
> mmap(0xFF364000, 496, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF364000
> munmap(0xFF32A000, 57344) = 0
> memcntl(0xFF280000, 301200, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> close(3) = 0
> stat("/lib/libdl.so.1", 0xFFBEF2E8) = 0
> resolvepath("/lib/libdl.so.1", "/usr/lib/libdl.so.1", 1023) = 19
> open("/lib/libdl.so.1", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> mmap(0x2B7E2F90, 8192, PROT_NONE, MAP_PRIVATE|MAP_NORESERVE|MAP_ANON,
> -1, 0) = 0xFF380000
> mmap(0xFF380000, 2302, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 0) = 0xFF380000
> close(3) = 0
Ok, libdl loaded.
> stat("/lib/libz.so", 0xFFBEF2E8) = 0
> resolvepath("/lib/libz.so", "/usr/lib/libz.so.1", 1023) = 18
> open("/lib/libz.so", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> mmap(0x042C2550, 122880, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF250000
> mmap(0xFF250000, 47322, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF250000
> mmap(0xFF26C000, 6292, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 49152) = 0xFF26C000
> munmap(0xFF25C000, 65536) = 0
> memcntl(0xFF250000, 5308, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> close(3) = 0
Ok, libz loaded.
> mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF370000
> stat("/lib/libstdc++.so.5", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/lib/libstdc++.so.5", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/local/ssl/lib/libstdc++.so.5", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/local/lib/libstdc++.so.5", 0xFFBEF2E8) = 0
> resolvepath("/usr/local/lib/libstdc++.so.5",
> "/usr/local/lib/libstdc++.so.5.0.2", 1023) = 33
> open("/usr/local/lib/libstdc++.so.5", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> mmap(0x042BF670, 557056, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF180000
> mmap(0xFF180000, 407880, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED,
> 3, 0) = 0xFF180000
> mmap(0xFF1F2000, 69600, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 401408) = 0xFF1F2000
> mmap(0xFF204000, 14344, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED|MAP_ANON, -1, 0) = 0xFF204000
> munmap(0xFF1E4000, 57344) = 0
> memcntl(0xFF180000, 182568, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> close(3) = 0
Ok, libstdc++ loaded.
> stat("/lib/libm.so.1", 0xFFBEF2E8) = 0
> resolvepath("/lib/libm.so.1", "/usr/lib/libm.so.1", 1023) = 18
> open("/lib/libm.so.1", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> mmap(0x02FAB5E8, 294912, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF130000
> mmap(0xFF130000, 225354, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED,
> 3, 0) = 0xFF130000
> mmap(0xFF176000, 7292, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 221184) = 0xFF176000
> munmap(0xFF168000, 57344) = 0
> memcntl(0xFF130000, 10604, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> close(3) = 0
Ok, libm loaded.
> stat("/lib/libgcc_s.so.1", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/lib/libgcc_s.so.1", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/local/ssl/lib/libgcc_s.so.1", 0xFFBEF2E8) Err#2 ENOENT
> stat("/usr/local/lib/libgcc_s.so.1", 0xFFBEF2E8) = 0
> resolvepath("/usr/local/lib/libgcc_s.so.1",
> "/usr/local/lib/libgcc_s.so.1", 1023) = 28
> open("/usr/local/lib/libgcc_s.so.1", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> mmap(0x02FACD58, 106496, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF230000
> mmap(0xFF230000, 30452, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF230000
> mmap(0xFF246000, 8484, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 24576) = 0xFF246000
> munmap(0xFF238000, 57344) = 0
> memcntl(0xFF230000, 5796, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> close(3) = 0
Ok, libgcc loaded
> stat("/lib/libc.so.1", 0xFFBEF2E8) = 0
> resolvepath("/lib/libc.so.1", "/usr/lib/libc.so.1", 1023) = 18
> open("/lib/libc.so.1", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> mmap(0x2B7E56A0, 802816, PROT_NONE,
> MAP_PRIVATE|MAP_NORESERVE|MAP_ANON, -1, 0) = 0xFF000000
> mmap(0xFF000000, 703936, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED,
> 3, 0) = 0xFF000000
> mmap(0xFF0BC000, 24772, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_FIXED, 3, 704512) = 0xFF0BC000
> munmap(0xFF0AC000, 65536) = 0
> memcntl(0xFF000000, 113528, MC_ADVISE, MADV_WILLNEED, 0, 0) = 0
> close(3)
Ok, libc loaded.
> = 0
> mmap(0x00000000, 8192, PROT_READ|PROT_WRITE|PROT_EXEC,
> MAP_PRIVATE|MAP_ANON, -1, 0) = 0xFF220000
> stat("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", 0xFFBEF000) = 0
> resolvepath("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1",
> "/usr/platform/sun4u-us3/lib/libc_psr.so.1", 1023) = 41
> open("/usr/platform/SUNW,Sun-Fire-480R/lib/libc_psr.so.1", O_RDONLY) = 3
> mmap(0xFF390000, 8192, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_FIXED, 3,
> 0) = 0xFF390000
> close(3) = 0
Looks like some libc complement.
> sysconfig(_CONFIG_STACK_PROT) = 3
> brk(0x00146C70) = 0
> brk(0x0014AC70) = 0
> brk(0x0014AC70) = 0
> brk(0x0014CC70) = 0
> pathconf(".", _PC_PATH_MAX) = 1024
> stat64("./", 0xFFBEF7A0) = 0
> stat64("/", 0xFFBEF708) = 0
> open64("./../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 1040
> getdents64(3, 0x0014C580, 1048) = 1000
> close(3) = 0
> open64("./../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 144
> close(3) = 0
> open64("./../../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 112
> close(3) = 0
> open64("./../../../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 176
> close(3) = 0
> open64("./../../../../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 1040
> getdents64(3, 0x0014C580, 1048) = 64
> getdents64(3, 0x0014C580, 1048) = 32
> getdents64(3, 0x0014C580, 1048) = 80
> getdents64(3, 0x0014C580, 1048) = 72
> close(3) = 0
> open64("./../../../../../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 584
> close(3) = 0
> open64("./../../../../../../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> getdents64(3, 0x0014C580, 1048) = 264
> close(3) = 0
> open64("./../../../../../../../../", O_RDONLY|O_NDELAY) = 3
> fcntl(3, F_SETFD, 0x00000001) = 0
> fstat64(3, 0xFFBEED28) = 0
> fstat64(3, 0xFFBEF7A0) = 0
> open("/etc/mnttab", O_RDONLY) = 4
> brk(0x0014CC70) = 0
> brk(0x0014EC70) = 0
> fstat64(4, 0xFFBEE6E8) = 0
> ioctl(4, TCGETA, 0xFFBEE674) Err#22 EINVAL
> read(4, " / d e v / m d / d s k /".., 512) = 512
> ioctl(4, (('m'<<8)|1), 0xFF0BEC30) = 0
> ioctl(4, (('m'<<8)|2), 0x0014A020) = 0
> read(4, " l e\t u f s\t r w , i n".., 512) = 512
> lstat64("/export", 0xFFBEE908) = 0
> lstat64("/export/..", 0xFFBEE908) = 0
> llseek(4, 0xFFFFFFFFFFFFFF6A, SEEK_CUR) = 874
> close(4) = 0
> close(3) = 0
The above looks like libc initialization
> stat("/opt/setedit/share/setedit/syntaxhl.shl", 0xFFBEF330) = 0
Syntax Highlight conf. is there, that's a check to determine where are
the config files.
> stat("/opt/setedit/lib/setedit/datetools.so", 0xFFBEF330) Err#2 ENOENT
> stat("/usr/lib/setedit/datetools.so", 0xFFBEF330) Err#2 ENOENT
> stat("/usr/local/lib/setedit/datetools.so", 0xFFBEF330) Err#2 ENOENT
Date Tools failed to load.
> stat("//.setedit", 0xFFBEF2C0) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> getpid() = 23734 [23733]
Note that HOME is pointing to / because you are running as root.
> sysconfig(_CONFIG_MAXPID) = 30000
> lstat64("//.setedit/erMSaWwU", 0xFFBEF318) Err#2 ENOENT
> open("//.setedit/erMSaWwU", O_RDWR|O_CREAT|O_EXCL, 0600) = 3
> getuid() = 0 [0]
> getgid() = 1 [1]
> chown("//.setedit/erMSaWwU", 0, 1) = 0
> dup(2) = 4
> fcntl(3, F_DUP2FD, 0x00000002) = 2
The standard error output was redirected to /.setedit/erMSaWwU
Please post the content of this file.
> sigaction(SIGABRT, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGFPE, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGILL, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGSEGV, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGTERM, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGINT, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGQUIT, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGINT, 0xFFBEF778, 0xFFBEF7F8) = 0
> sigaction(SIGQUIT, 0xFFBEF7E8, 0xFFBEF868) = 0
Signals redirected.
> stat("/tmp", 0xFFBEF7A0) = 0
> access("/tmp", 1) = 0
> stat("//.setedit", 0xFFBEED50) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/setenvir.dat", 0xFFBEEDC0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEED50) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.setenvir.dat", 0xFFBEEDC0) Err#2 ENOENT
> stat("//.setenvir.dat", 0xFFBEEDC0) Err#2 ENOENT
> stat("//setenvir.dat", 0xFFBEEDC0) Err#2 ENOENT
> open("/opt/setedit/share/setedit/setenvir.dat", O_RDONLY) Err#2 ENOENT
No setenvir.dat file found (ok for the first run).
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/keybind.dat", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.keybind.dat", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.keybind.dat", 0xFFBEF7A0) Err#2 ENOENT
> stat("//keybind.dat", 0xFFBEF7A0) Err#2 ENOENT
> open("/opt/setedit/share/setedit/keybind.dat", O_RDONLY) Err#2 ENOENT
No keybind.dat file (ok).
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/syntaxhl.shl", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.syntaxhl.shl", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.syntaxhl.shl", 0xFFBEF7A0) Err#2 ENOENT
> stat("//syntaxhl.shl", 0xFFBEF7A0) Err#2 ENOENT
> open("/opt/setedit/share/setedit/syntaxhl.shl", O_RDONLY) = 5
Syntax Highlight file found and starting to load.
> fstat64(5, 0xFFBEF6C8) = 0
> brk(0x0014EC70) = 0
> brk(0x00150C70) = 0
> ioctl(5, TCGETA, 0xFFBEF654) Err#25 ENOTTY
> read(5, " # C o p y r i g h t ".., 8192) = 8192
> read(5, " d i , e d i , s p , e s".., 8192) = 8192
> read(5, " f I n f C o m p i l e r".., 8192) = 8192
> read(5, " p a g e , p c , p r o c".., 8192) = 8192
> read(5, " u , e r r o r , e x i t".., 8192) = 8192
> read(5, " f i l e s , : : t c l t".., 8192) = 8192
> read(5, " e c k : 4 0 1 , * d c c".., 8192) = 8192
> read(5, " e a r , \ s e t q u a d".., 8192) = 8192
> read(5, " - - - - - - - - P D P".., 8192) = 8192
> read(5, " l e n a m e , u n d e f".., 8192) = 8192
> read(5, " e y w o r d s = S E R V".., 8192) = 8192
> read(5, " c l u d e _ o n c e , i".., 8192) = 8192
> read(5, " a t i o n F u n c t i".., 8192) = 8192
> read(5, " B a s e d o n t h".., 8192) = 8192
> read(5, " p e c i a l S y m b o l".., 8192) = 6616
> read(5, 0x0014D604, 8192) = 0
> brk(0x00150C70) = 0
> brk(0x00158C70) = 0
> llseek(5, 0, SEEK_CUR) = 121304
> llseek(5, 0, SEEK_SET) = 0
> read(5, " # C o p y r i g h t ".., 8192) = 8192
> read(5, " d i , e d i , s p , e s".., 8192) = 8192
> read(5, " f I n f C o m p i l e r".., 8192) = 8192
> brk(0x00158C70) = 0
> brk(0x0015AC70) = 0
> read(5, " p a g e , p c , p r o c".., 8192) = 8192
> read(5, " u , e r r o r , e x i t".., 8192) = 8192
> read(5, " f i l e s , : : t c l t".., 8192) = 8192
> read(5, " e c k : 4 0 1 , * d c c".., 8192) = 8192
> read(5, " e a r , \ s e t q u a d".., 8192) = 8192
> read(5, " - - - - - - - - P D P".., 8192) = 8192
> read(5, " l e n a m e , u n d e f".., 8192) = 8192
> read(5, " e y w o r d s = S E R V".., 8192) = 8192
> read(5, " c l u d e _ o n c e , i".., 8192) = 8192
> read(5, " a t i o n F u n c t i".., 8192) = 8192
> read(5, " B a s e d o n t h".., 8192) = 8192
> read(5, " p e c i a l S y m b o l".., 8192) = 6616
> llseek(5, 0xFFFFFFFFFFFFFFFF, SEEK_CUR) = 121303
> close(5) = 0
Finished to load.
> stat("//.setedit", 0xFFBEF4F8) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/deflopts.txt", 0xFFBEF568) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF4F8) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.deflopts.txt", 0xFFBEF568) Err#2 ENOENT
> stat("//.deflopts.txt", 0xFFBEF568) Err#2 ENOENT
> stat("//deflopts.txt", 0xFFBEF568) Err#2 ENOENT
> open("/opt/setedit/share/setedit/deflopts.txt", O_RDONLY) Err#2 ENOENT
No default options (ok).
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/errors.cle", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.errors.cle", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.errors.cle", 0xFFBEF7A0) Err#2 ENOENT
> stat("//errors.cle", 0xFFBEF7A0) Err#2 ENOENT
No errors.cle (ok).
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/nobkp.txt", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF730) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.nobkp.txt", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.nobkp.txt", 0xFFBEF7A0) Err#2 ENOENT
> stat("//nobkp.txt", 0xFFBEF7A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF730) = 0
No nobkp.txt (ok).
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> open64(".", O_RDONLY|O_NDELAY) = 5
> fcntl(5, F_SETFD, 0x00000001) = 0
> fstat64(5, 0xFFBEF330) = 0
> getdents64(5, 0x0014E458, 1048) = 1048
> getdents64(5, 0x0014E458, 1048) = 1032
> getdents64(5, 0x0014E458, 1048) = 512
> getdents64(5, 0x0014E458, 1048) = 0
> close(5) = 0
> stat("tcedit.dst", 0xFFBEF3A0) Err#2 ENOENT
> stat(".tcedit.dst", 0xFFBEF3A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF2C0) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF2C0) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("//.tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("//tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("/opt/setedit/share/setedit/tcedit.dst", 0xFFBEF3A0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF2C0) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("//.setedit", 0xFFBEF2C0) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/..tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("//..tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("//.tcedit.dst", 0xFFBEF330) Err#2 ENOENT
> stat("/opt/setedit/share/setedit/.tcedit.dst", 0xFFBEF3A0) Err#2 ENOENT
No desktop file (ok).
> stat("//.setedit", 0xFFBEEE50) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/install.log", 0xFFBEEEC0) Err#2 ENOENT
> stat("//.setedit", 0xFFBEEE50) = 0
> access("//.setedit", 1) = 0
> access("//.setedit", 2) = 0
> stat("//.setedit/.install.log", 0xFFBEEEC0) Err#2 ENOENT
> stat("//.install.log", 0xFFBEEEC0) Err#2 ENOENT
> stat("//install.log", 0xFFBEEEC0) Err#2 ENOENT
> open("/opt/setedit/share/setedit/install.log", O_RDONLY) Err#2 ENOENT
No install.log (?)
> stat("./tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("./.tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("//tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("//.tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("/etc/tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("/etc/.tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("/dev/env/DJDIR/etc/tvrc", 0xFFBEF628) Err#2 ENOENT
> stat("/dev/env/DJDIR/etc/.tvrc", 0xFFBEF628) Err#2 ENOENT
No TV config (ok).
> write(2, " E r r o r : U n s u p".., 28) = 28
The full message should be in /.setedit/erMSaWwU but looks like TV
couldn't find a usable terminal.
> llseek(0, 0, SEEK_CUR) = 25610
> llseek(0, 0, SEEK_CUR) = 25644
> _exit(1)
> root >
>
>
> Your help is appreciated
I need the output of TVision configuration to know which terminals are
supported for your compilation.
Regards, SET
|
