We can to set the baud rate (used in the serial port) to 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 or 460800/ But Samsung's devices used 231200, and it's not in the list.
Please, add it.
Nice project.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hi,
Thank you for the feedback! Just noticed this, 13 months later.
I added that line of code to the source control system, so there is the new codes available.
It has been developed with SharpDevelop (open source free software) so just download and install it if you already don't have it.
Then download the source code of SerialToIp and open the .sln -file.
Finally, choose build or rebuild from the menu of Sharpdevelop and you get new executables.
Note: the command line version already supported all the possible baudrates that your system supports, despite of the help text listing only some examples. You may already know, but the very high baud rates (above 115,200) are rarely supported by "normal" pc-end (USB or other boxes) serial ports unless their technical information states otherwise.
We can to set the baud rate (used in the serial port) to 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 or 460800/ But Samsung's devices used 231200, and it's not in the list.
Please, add it.
Nice project.
We can to set the baud rate (used in the serial port) to 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 or 460800/ But Samsung's devices used 231200, and it's not in the list.
Please, add it.
Nice project.
hi,
Thank you for the feedback! Just noticed this, 13 months later.
I added that line of code to the source control system, so there is the new codes available.
It has been developed with SharpDevelop (open source free software) so just download and install it if you already don't have it.
Then download the source code of SerialToIp and open the .sln -file.
Finally, choose build or rebuild from the menu of Sharpdevelop and you get new executables.
Note: the command line version already supported all the possible baudrates that your system supports, despite of the help text listing only some examples. You may already know, but the very high baud rates (above 115,200) are rarely supported by "normal" pc-end (USB or other boxes) serial ports unless their technical information states otherwise.
Sorry for replying so late.
-R
Lähettäjä: GarrikUA garrikua@users.sf.net
Vastaanottaja: [serialtoip:discussion] general@discussion.serialtoip.p.re.sf.net
Lähetetty: perjantai 1. kesäkuuta 2012 12.57
Aihe: [serialtoip:discussion] The Baudrate
We can to set the baud rate (used in the serial port) to 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 or 460800/ But Samsung's devices used 231200, and it's not in the list.
Please, add it.
Nice project.
Sent from sourceforge.net because you indicated interest in https://sourceforge.net/p/serialtoip/discussion/general/
To unsubscribe from further messages, please visit https://sourceforge.net/auth/prefs/