Recent changes to Home

Home modified by TWINGSISTER

TWINGSISTER — Sat, 03 Nov 2018 23:44:00 -0000

--- v52
+++ v53
@@ -20,9 +20,9 @@

 SourceForge Folder | Model | Turbosquid
 ---------- | ---------- | ------
-[TiNspire](https://sourceforge.net/projects/seashell3dmodels/files/TiNspire%20SeaShells/)|)|
 [Boat Ear Moon](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/ )     |     | [Boat Ear Moon](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102306) 
 [Fool Cap](https://sourceforge.net/projects/seashell3dmodels/files/Fool%20cap/)      | | [Fool Cap](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1105228)
+[TiNspire](https://sourceforge.net/projects/seashell3dmodels/files/TiNspire%20SeaShells/)|)|n.a.
 [Ammonite](https://sourceforge.net/projects/seashell3dmodels/files/Ammonite%20fossil/ )      | | [Ammonite](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102090)
 [Limpet](https://sourceforge.net/projects/seashell3dmodels/files/Common%20European%20Limpet/ )      | | [Limpet](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102361)
 [Olive](https://sourceforge.net/projects/seashell3dmodels/files/Common%20olive/ )      | | [Olive](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102560)

Home modified by TWINGSISTER

TWINGSISTER — Sat, 03 Nov 2018 23:42:19 -0000

--- v51
+++ v52
@@ -19,7 +19,8 @@
 The following table contains some examples generated in Blender using this plugin. The related files are in the SourceForge folder below. See the generated models  for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816).They are all created with this addon.

 SourceForge Folder | Model | Turbosquid
----------- | ---------- | ------ 
+---------- | ---------- | ------
+[TiNspire](https://sourceforge.net/projects/seashell3dmodels/files/TiNspire%20SeaShells/)|)|
 [Boat Ear Moon](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/ )     |     | [Boat Ear Moon](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102306) 
 [Fool Cap](https://sourceforge.net/projects/seashell3dmodels/files/Fool%20cap/)      | | [Fool Cap](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1105228)
 [Ammonite](https://sourceforge.net/projects/seashell3dmodels/files/Ammonite%20fossil/ )      | | [Ammonite](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102090)

Home modified by TWINGSISTER

TWINGSISTER — Sat, 03 Nov 2018 23:32:17 -0000

--- v50
+++ v51
@@ -15,7 +15,7 @@
 If you want to define a colorful model in this Python module  there must be definition for three functions **red(x,y,z,u,v)**, **green(x,y,z,u,v)** and **blue(x,y,z,u,v)** that returns a float real number between (or equal to) 0.0 and 1.0.  Input parameters are the cartesian coordinates P=(x,y,z) of a point P and u,v are the parameters that are assigned internally to get point P. The only known constraint on u and v is that they assume a value between (or equal to) 0.0 and 1.0.  If alll thee conditions are met and the configuration file contains a valid function definition for r,g,b then the underlying library take care to assign color specified by red,green and blue functions to point P.  Examples of the configuration.py file are provided in subdirectories containing the different shells. Note that if the configuration file contains an invalid Python code the system opens an error window and gives you some information about what went wrong. If you want to map a texture onto the shell simply follow the example provide with each shell. 
 # Examples
 The  [work](http://www.mat.uc.pt/~picado/conchas/eng/article.pdf)  of Jorge Picado and the  [work](https://www.researchgate.net/publication/238757952) of Michael B. Cortie present a number of shells with parameters given for each shell.  A browsable library of  3D models is presented [here](http://www.mat.uc.pt/%7Epicado/conchas/exemplosindex.html).
-The  [folder](https://sourceforge.net/projects/seashell3dmodels/files/TiNspire%20SeaShells/)  contains a couple of files that can create seashells using the Texas TINspire pocket calculator.
+This  [folder](https://sourceforge.net/projects/seashell3dmodels/files/TiNspire%20SeaShells/)  contains a couple of files that can create seashells using the Texas TINspire pocket calculator.
 The following table contains some examples generated in Blender using this plugin. The related files are in the SourceForge folder below. See the generated models  for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816).They are all created with this addon.

 SourceForge Folder | Model | Turbosquid

Home modified by TWINGSISTER

TWINGSISTER — Sat, 03 Nov 2018 23:30:09 -0000

--- v49
+++ v50
@@ -14,7 +14,9 @@
 Possibly the system will issue some error windows complaining about missing definitions when reading the .json file. That's correct, no  Python file has been consulted in, yet. The system groans and require an external file to be uploaded. This file must be a valid Python module (.py) or a valid compiled Python module (.pyc) or a zip file containing a collection of valid Python modules.  This file must load a Python module. 
 If you want to define a colorful model in this Python module  there must be definition for three functions **red(x,y,z,u,v)**, **green(x,y,z,u,v)** and **blue(x,y,z,u,v)** that returns a float real number between (or equal to) 0.0 and 1.0.  Input parameters are the cartesian coordinates P=(x,y,z) of a point P and u,v are the parameters that are assigned internally to get point P. The only known constraint on u and v is that they assume a value between (or equal to) 0.0 and 1.0.  If alll thee conditions are met and the configuration file contains a valid function definition for r,g,b then the underlying library take care to assign color specified by red,green and blue functions to point P.  Examples of the configuration.py file are provided in subdirectories containing the different shells. Note that if the configuration file contains an invalid Python code the system opens an error window and gives you some information about what went wrong. If you want to map a texture onto the shell simply follow the example provide with each shell. 
 # Examples
-In the  [work](http://www.mat.uc.pt/~picado/conchas/eng/article.pdf)  of Jorge Picado and in the  [work](https://www.researchgate.net/publication/238757952) of Michael B. Cortie  a number of shells are presented with parameters given for each shell.  A library of browsable 3D models is presented [here](http://www.mat.uc.pt/%7Epicado/conchas/exemplosindex.html). The following table contains some examples in Blender using this plugin. A The related files are in the SourceForge folder below. See for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816) the same models created with this addon.
+The  [work](http://www.mat.uc.pt/~picado/conchas/eng/article.pdf)  of Jorge Picado and the  [work](https://www.researchgate.net/publication/238757952) of Michael B. Cortie present a number of shells with parameters given for each shell.  A browsable library of  3D models is presented [here](http://www.mat.uc.pt/%7Epicado/conchas/exemplosindex.html).
+The  [folder](https://sourceforge.net/projects/seashell3dmodels/files/TiNspire%20SeaShells/)  contains a couple of files that can create seashells using the Texas TINspire pocket calculator.
+The following table contains some examples generated in Blender using this plugin. The related files are in the SourceForge folder below. See the generated models  for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816).They are all created with this addon.

 SourceForge Folder | Model | Turbosquid
 ---------- | ---------- | ------

Home modified by TWINGSISTER

TWINGSISTER — Sat, 03 Nov 2018 23:01:37 -0000

--- v48
+++ v49
@@ -14,7 +14,7 @@
 Possibly the system will issue some error windows complaining about missing definitions when reading the .json file. That's correct, no  Python file has been consulted in, yet. The system groans and require an external file to be uploaded. This file must be a valid Python module (.py) or a valid compiled Python module (.pyc) or a zip file containing a collection of valid Python modules.  This file must load a Python module. 
 If you want to define a colorful model in this Python module  there must be definition for three functions **red(x,y,z,u,v)**, **green(x,y,z,u,v)** and **blue(x,y,z,u,v)** that returns a float real number between (or equal to) 0.0 and 1.0.  Input parameters are the cartesian coordinates P=(x,y,z) of a point P and u,v are the parameters that are assigned internally to get point P. The only known constraint on u and v is that they assume a value between (or equal to) 0.0 and 1.0.  If alll thee conditions are met and the configuration file contains a valid function definition for r,g,b then the underlying library take care to assign color specified by red,green and blue functions to point P.  Examples of the configuration.py file are provided in subdirectories containing the different shells. Note that if the configuration file contains an invalid Python code the system opens an error window and gives you some information about what went wrong. If you want to map a texture onto the shell simply follow the example provide with each shell. 
 # Examples
-In the  [work](http://have a quick start www.mat.uc.pt/~picado/conchas/eng/article.pdf)  of Jorge Picado a number of shells are presented with parameters given for each shell.  A library of browsable 3D models is presented [here](http://www.mat.uc.pt/%7Epicado/conchas/exemplosindex.html). The following table there are the some examples in Blender using this plugin. The related files are in the SourceForge folder below. See for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816) the same models created with this addon.
+In the  [work](http://www.mat.uc.pt/~picado/conchas/eng/article.pdf)  of Jorge Picado and in the  [work](https://www.researchgate.net/publication/238757952) of Michael B. Cortie  a number of shells are presented with parameters given for each shell.  A library of browsable 3D models is presented [here](http://www.mat.uc.pt/%7Epicado/conchas/exemplosindex.html). The following table contains some examples in Blender using this plugin. A The related files are in the SourceForge folder below. See for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816) the same models created with this addon.

 SourceForge Folder | Model | Turbosquid
 ---------- | ---------- | ------

Home modified by TWINGSISTER

TWINGSISTER — Mon, 10 Apr 2017 22:18:12 -0000

--- v47
+++ v48
@@ -4,7 +4,7 @@

 ![](https://sourceforge.net/p/seashell3dmodels/wiki/Home/attachment/jsonloaded.png). 

-The parameters that are not present in the original work are P1 P2 and Div Theta_0 Turns s_0.  Parameters P1 and P2 can be  used in the Python configuration file that will be considered later on in these instructions. Other added parameters are the number of turns (Turns) the section will do. It is also possible to set  the starting angle (Theta_0) for these turns and the starting radius size (s_0). Parameter Div, as in the other BlendBridge plugins, gives the number of 
+The parameters that are not present in the original work are P1 P2 and parameters in curly brackets i.e. Div, Theta_0, Turns, s_0 and s_f.  Parameters P1 and P2 can be  used in the Python configuration file that will be considered later on in these instructions. Other added parameters are the number of turns (Turns) the section will do. It is also possible to set  the starting angle (Theta_0) for these turns and the starting radius size (s_0) and the final radius size. Parameter Div, as in the other BlendBridge plugins, gives the number of 
 divisions the parametric surface is divided into. 
 After that, you have to download the configuration.py file [here](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/).Then using the button Upload you can consult in the Python configuration file. In this file you can add Python code to set colors for each vertex of the shell or a texture.
 The procedure for this is detailed in the [documentation for the ColorQuadrics addon documentation](https://sourceforge.net/p/color-quadrics/wiki/Home/). If you worked properly you will get a shell surface with a texture on it. Please note that an actual object in Sverchok is generated only by pressing the buttons Draw or Bake If it doesn't work, you could have to open the configuration file and control if the "return" command brings the jpg from the right location that the file has on your computer. Note that, when you give the location of a file, you have to separate each directory name from the others by using two slashes \ .

Home modified by TWINGSISTER

TWINGSISTER — Mon, 10 Apr 2017 22:10:42 -0000

--- v46
+++ v47
@@ -1,17 +1,18 @@
 The TWINGSISTER's  projects contains a number of Blender addons. So to enjoy something here you first have to download and install Blender.   Second we refer you to the [documentation for the Quadrics addon](https://sourceforge.net/p/blendbridge/wiki/). There you will find all the instruction needed to install any of the TWINGSISTER addon. 
-Basically you need to download Sverchok plugin and the BlendBridge plugin that is distributed as a perk in the [internal TWINGSISTER fundraising champaing](http://twingsister.x10host.com/wordpress/index.php/blendbridge/). The Seashell 3D Models  addon is based on the work of Jorge Picado and you need to browse his article [here](http://have a quick start www.mat.uc.pt/~picado/conchas/eng/article.pdf) to find the meaning of most of the parameters used in this add on.  However, to have a quick start with this addon you can upload the **BoatEarMoon.json **file you can find [here](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/). The instruction for loading a json file are in the Quadrics documentation.
+Basically you need to download the Sverchok plugin or the Animation Nodes plugin and the BlendBridge plugin that is distributed as a perk in the [internal TWINGSISTER fundraising champaing](http://twingsister.x10host.com/wordpress/index.php/blendbridge/). The Seashell 3D Models  addon is based on the work of Jorge Picado and you need to browse his article [here](http://have a quick start www.mat.uc.pt/~picado/conchas/eng/article.pdf) to find the meaning of most of the parameters used in this add on.  However, to have a quick start with this addon you can upload the **BoatEarMoon.json **file you can find [here](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/). The instruction for loading a json file are in the Quadrics documentation.
 Once you have loaded **BoatEarMoon.json ** file  you will find yourself in the situation depicted in the figure below.

 ![](https://sourceforge.net/p/seashell3dmodels/wiki/Home/attachment/jsonloaded.png). 

-The parameters that are not present in the original work are P1 P2 and those in curly brackets.  Parameters P1 and P2 can be  used in the configuration file that will be considered next. Other added parameters, between curly brackets are the number of turns the section will do. It is also possible to set  the starting angle for these turns and the starting radius size.
-After that, you have to download the configuration.py file [here](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/).Then using A_Filename and A_Upload you can consult in the configuration.py file. In this file you can add Python code to set color for the shell or a texture.
-The procedure for this is detailed in the [documentation for the ColorQuadrics addon documentation](https://sourceforge.net/p/color-quadrics/wiki/Home/) documentation. If you worked properly you will get a shell surface with a texture on it. Please note that an actual object is generated only by Add>BlendLink>Draw. If it doesn't work, you could have to open the configuration.py file and control if the "return" command brings the jpg from the right location that the file has on your computer. Note that, when you give the location of a file, you have to separate each directory name from the others by using two slashes \ .
+The parameters that are not present in the original work are P1 P2 and Div Theta_0 Turns s_0.  Parameters P1 and P2 can be  used in the Python configuration file that will be considered later on in these instructions. Other added parameters are the number of turns (Turns) the section will do. It is also possible to set  the starting angle (Theta_0) for these turns and the starting radius size (s_0). Parameter Div, as in the other BlendBridge plugins, gives the number of 
+divisions the parametric surface is divided into. 
+After that, you have to download the configuration.py file [here](https://sourceforge.net/projects/seashell3dmodels/files/Boot%20Ear%20Moon/).Then using the button Upload you can consult in the Python configuration file. In this file you can add Python code to set colors for each vertex of the shell or a texture.
+The procedure for this is detailed in the [documentation for the ColorQuadrics addon documentation](https://sourceforge.net/p/color-quadrics/wiki/Home/). If you worked properly you will get a shell surface with a texture on it. Please note that an actual object in Sverchok is generated only by pressing the buttons Draw or Bake If it doesn't work, you could have to open the configuration file and control if the "return" command brings the jpg from the right location that the file has on your computer. Note that, when you give the location of a file, you have to separate each directory name from the others by using two slashes \ .

 So  you have to know how to read in a .json file (see documentation for the Quadrics addon) and how to read in a .py file (see documentation for the ColorQuadrics addon). So, you cannot avoid to do  these steps,  unless you have some intuition and you are lucky.

-Possibly the system will issue some error windows complaining about missing definitions when reading the .json file. That's correct, no  Python file has been consulted in, yet. The system groans and require an external file to be uploaded. This file must be a valid Python module (.py) or a valid compiled Python module (.pyc) or a zip file containing a collection of valid Python modules.  This file must load a Python module called **configuration**. 
-If you want to define a colorful model in this Python module  there must be definition for three functions **red(x,y,z,u,v)**, **green(x,y,z,u,v)** and **blue(x,y,z,u,v)** that returns a float real number between (or equal to) 0.0 and 1.0.  Input parameters are the cartesian coordinates P=(x,y,z) of a point P and u,v are the parameters that are assigned internally to get point P. The only known constraint on u and v is that they assume a value between (or equal to) 0.0 and 1.0.  If alll thee conditions are met and the configuration.py  module contains a valid function definition for r,g,b then the underlying library take care to assign color specified by red,green and blue functions to point P.  Examples of the configuration.py file are provided in subdirectories containing the different shells. Note that if the configuration.py file contains an invalid Python code the system opens an error window and gives you some information about what went wrong. If you want to map a texture onto the shell simply follow the example provide with each shell. 
+Possibly the system will issue some error windows complaining about missing definitions when reading the .json file. That's correct, no  Python file has been consulted in, yet. The system groans and require an external file to be uploaded. This file must be a valid Python module (.py) or a valid compiled Python module (.pyc) or a zip file containing a collection of valid Python modules.  This file must load a Python module. 
+If you want to define a colorful model in this Python module  there must be definition for three functions **red(x,y,z,u,v)**, **green(x,y,z,u,v)** and **blue(x,y,z,u,v)** that returns a float real number between (or equal to) 0.0 and 1.0.  Input parameters are the cartesian coordinates P=(x,y,z) of a point P and u,v are the parameters that are assigned internally to get point P. The only known constraint on u and v is that they assume a value between (or equal to) 0.0 and 1.0.  If alll thee conditions are met and the configuration file contains a valid function definition for r,g,b then the underlying library take care to assign color specified by red,green and blue functions to point P.  Examples of the configuration.py file are provided in subdirectories containing the different shells. Note that if the configuration file contains an invalid Python code the system opens an error window and gives you some information about what went wrong. If you want to map a texture onto the shell simply follow the example provide with each shell. 
 # Examples
 In the  [work](http://have a quick start www.mat.uc.pt/~picado/conchas/eng/article.pdf)  of Jorge Picado a number of shells are presented with parameters given for each shell.  A library of browsable 3D models is presented [here](http://www.mat.uc.pt/%7Epicado/conchas/exemplosindex.html). The following table there are the some examples in Blender using this plugin. The related files are in the SourceForge folder below. See for sale at Turbosquid [here](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1047816) the same models created with this addon.

Home modified by TWINGSISTER

TWINGSISTER — Mon, 26 Dec 2016 22:43:20 -0000

--- v45
+++ v46
@@ -25,7 +25,7 @@
 [Elephant Tusk](https://sourceforge.net/projects/seashell3dmodels/files/Elephant%20tusk%20shells/)      | | [Elephant Tusk *FREE* ](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102643)
 [European Bittersweet](https://sourceforge.net/projects/seashell3dmodels/files/European%20Bittersweet/)      | | [European Bittersweet](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102933)
 [Glory of the Sea](https://sourceforge.net/projects/seashell3dmodels/files/Glory%20of%20the%20sea/)      | | [Glory of the Sea](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1106047)
-[Golden Brown Ancilla](https://sourceforge.net/projects/seashell3dmodels/files/Golden%20Brown%20Ancilla/)      | | [Golden Brown Ancilla](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1106047)
+[Golden Brown Ancilla](https://sourceforge.net/projects/seashell3dmodels/files/Golden%20Brown%20Ancilla/)      | | [Golden Brown Ancilla](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1106647)
 cell | cell | cell 
 The wiki uses [Markdown](/p/seashell3dmodels/wiki/markdown_syntax/) syntax.
 [[members limit=20]]

Home modified by TWINGSISTER

TWINGSISTER — Mon, 26 Dec 2016 21:49:36 -0000

--- v44
+++ v45
@@ -25,7 +25,7 @@
 [Elephant Tusk](https://sourceforge.net/projects/seashell3dmodels/files/Elephant%20tusk%20shells/)      | | [Elephant Tusk *FREE* ](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102643)
 [European Bittersweet](https://sourceforge.net/projects/seashell3dmodels/files/European%20Bittersweet/)      | | [European Bittersweet](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102933)
 [Glory of the Sea](https://sourceforge.net/projects/seashell3dmodels/files/Glory%20of%20the%20sea/)      | | [Glory of the Sea](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1106047)
-
+[Golden Brown Ancilla](https://sourceforge.net/projects/seashell3dmodels/files/Golden%20Brown%20Ancilla/)      | | [Golden Brown Ancilla](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1106047)
 cell | cell | cell 
 The wiki uses [Markdown](/p/seashell3dmodels/wiki/markdown_syntax/) syntax.
 [[members limit=20]]

Home modified by TWINGSISTER

TWINGSISTER — Sat, 24 Dec 2016 17:42:36 -0000

--- v43
+++ v44
@@ -24,7 +24,7 @@
 [Olive](https://sourceforge.net/projects/seashell3dmodels/files/Common%20olive/ )      | | [Olive](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102560)
 [Elephant Tusk](https://sourceforge.net/projects/seashell3dmodels/files/Elephant%20tusk%20shells/)      | | [Elephant Tusk *FREE* ](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102643)
 [European Bittersweet](https://sourceforge.net/projects/seashell3dmodels/files/European%20Bittersweet/)      | | [European Bittersweet](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102933)
-[Glory of the Sea](https://sourceforge.net/projects/seashell3dmodels/files/Glory%20of%20the%20sea/)      | | [Glory of the Sea](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1102933)
+[Glory of the Sea](https://sourceforge.net/projects/seashell3dmodels/files/Glory%20of%20the%20sea/)      | | [Glory of the Sea](http://www.turbosquid.com/FullPreview/Index.cfm/ID/1106047)

 cell | cell | cell 
 The wiki uses [Markdown](/p/seashell3dmodels/wiki/markdown_syntax/) syntax.