Menu
▾
▴
sd4l-user
|
From: Stewart M. <smm...@gm...> - 2011-03-02 04:32:35
|
On Mon, 2011-02-28 at 18:30 -0500, Millen, Stewart wrote: > > -----Original Message----- > From: Jonathan Coles [mailto:jco...@ro...] > Sent: Monday, February 28, 2011 6:30 PM > To: sd4...@li... > Subject: [I] Re: [SD4L-user] Questions about compiling Scramdisk from Source > > The problem in your compile is in creating the documentation > PDFs. > > Instructions that I have followed before require the > following Latex packages: > texlive > texlive-latex-recommended > texlive-latex-extra > > On my new system, Ubuntu 10.10, I tried simply entering the > command "pdflatex". > The response: > The program 'pdflatex' is currently not installed. You > can install it by typing: > sudo apt-get install texlive-latex-base > > So there's another package name to try. > > It's annoying that building the documentation can break > compilation. > It would be better if the doc source was separate. The PDF > file is all most users want. > > It's possible that if you got the English and German PDFs > off the web site and put them > in /usr/src/linux/ScramDisk-2.1/docs, the script would skip > trying to make them. > > Jonathan Last night, before compiling, kernel 2.6.32-29 appeared in Update Manager. So I installed it. Then I: sudo apt-get install texlive-latex-base Then I went into Synaptic and made sure that the other packages you referred to: texlive texlive-latex-recommended texlive-latex-extra were all installed. I then cleared out the folder /usr/src/linux and restarted the computer to activate kernel 2.6.32-29, and restarted the compilation process from scratch again. The good news, if it is, is that this time it (apparently) compiled successfully after the command "make", and after the command: make deb Created the package ScramDisk_2.1-0_2.6.32_i386.deb With no apparent error messages (though I could not save the output, as it was too large--I tried but it was incomplete). With high hopes, I then went to my user account and tried to open a container file. But I get the error: "Could not lock etc/mtab" So what gives? Stewart |
|
From: Jonathan C. <jco...@ro...> - 2011-03-02 11:51:33
|
I have experienced the same thing. Try running the make as root. That solved the problem for me. You might want to run "make clean" first to make sure that everything gets rebuilt. You could even try starting your current ScramDisk -- the one that has the problem -- as root. If it works, then there really isn't another problem. Just remake the .deb as root and reinstall. Your .deb file will be owned by root and be read-only, but that's not a problem for installation. I had to re-make ScramDisk last night because of a kernel upgrade. If I recall correctly, I just ran "make deb" without a plain "make" first. On 11-03-01 11:32 PM, Stewart Millen wrote: > On Mon, 2011-02-28 at 18:30 -0500, Millen, Stewart wrote: >> -----Original Message----- >> From: Jonathan Coles [mailto:jco...@ro...] >> Sent: Monday, February 28, 2011 6:30 PM >> To: sd4...@li... >> Subject: [I] Re: [SD4L-user] Questions about compiling Scramdisk from Source >> >> The problem in your compile is in creating the documentation >> PDFs. >> >> Instructions that I have followed before require the >> following Latex packages: >> texlive >> texlive-latex-recommended >> texlive-latex-extra >> >> On my new system, Ubuntu 10.10, I tried simply entering the >> command "pdflatex". >> The response: >> The program 'pdflatex' is currently not installed. You >> can install it by typing: >> sudo apt-get install texlive-latex-base >> >> So there's another package name to try. >> >> It's annoying that building the documentation can break >> compilation. >> It would be better if the doc source was separate. The PDF >> file is all most users want. >> >> It's possible that if you got the English and German PDFs >> off the web site and put them >> in /usr/src/linux/ScramDisk-2.1/docs, the script would skip >> trying to make them. >> >> Jonathan > > Last night, before compiling, kernel 2.6.32-29 appeared in Update > Manager. So I installed it. Then I: > > sudo apt-get install texlive-latex-base > > Then I went into Synaptic and made sure that the other packages you > referred to: > > texlive > texlive-latex-recommended > texlive-latex-extra > > were all installed. > > I then cleared out the folder /usr/src/linux and restarted the computer > to activate kernel 2.6.32-29, and restarted the compilation process from > scratch again. > > The good news, if it is, is that this time it (apparently) compiled > successfully after the command "make", and after the command: > > make deb > > Created the package ScramDisk_2.1-0_2.6.32_i386.deb > > With no apparent error messages (though I could not save the output, as > it was too large--I tried but it was incomplete). > > With high hopes, I then went to my user account and tried to open a > container file. But I get the error: > > "Could not lock etc/mtab" > > So what gives? > > Stewart > > |
|
From: Stewart M. <smm...@gm...> - 2011-03-03 12:47:36
|
On Wed, 2011-03-02 at 06:51 -0500, Jonathan Coles wrote: Hi Jonathan, I posted the output of $ make the orevious night, but because the post was 80k, the moderators are holding it for review for being too large. Didn't get home early enough to try your suggestions yet, but I figured I could clear up some things before I did. > I have experienced the same thing. Try running the make as > root. That solved the problem for me. You might want to run > "make clean" first to make sure that everything gets rebuilt. When you say "trying running 'make' as root, do you mean: $ sudo make ? Or do you mean going into "Users and Groups" and enabling the root account? (Not logging in as root, but enabling a root account with a passphrase and then invoking it by the $ su - command). > You could even try starting your current ScramDisk -- the > one that has the problem -- as root. If it works, then there > really isn't another problem. Just remake the .deb as root > and reinstall. you mean: $ gksudo scramdisk I take it? > Your .deb file will be owned by root and be read-only, but > that's not a problem for installation. > > I had to re-make ScramDisk last night because of a kernel > upgrade. If I recall correctly, I just ran "make deb" > without a plain "make" first. Thanks for the help, Jonathan. Stewart |
|
From: Jonathan C. <jco...@ro...> - 2011-03-04 00:10:23
|
Answers in-line below... Good luck. On 11-03-03 07:47 AM, Stewart Millen wrote: > On Wed, 2011-03-02 at 06:51 -0500, Jonathan Coles wrote: > > Hi Jonathan, > > I posted the output of $ make the orevious night, but because the post > was 80k, the moderators are holding it for review for being too large. > > Didn't get home early enough to try your suggestions yet, but I figured > I could clear up some things before I did. > >> I have experienced the same thing. Try running the make as >> root. That solved the problem for me. You might want to run >> "make clean" first to make sure that everything gets rebuilt. > When you say "trying running 'make' as root, do you mean: > > $ sudo make Yes. > ? > > Or do you mean going into "Users and Groups" and enabling the root > account? (Not logging in as root, but enabling a root account with a > passphrase and then invoking it by the $ su - command). > >> You could even try starting your current ScramDisk -- the >> one that has the problem -- as root. If it works, then there >> really isn't another problem. Just remake the .deb as root >> and reinstall. > you mean: > > $ gksudo scramdisk > > I take it? I use sudo when I need root powers. I'm not sure what the difference is between sudo and gksudo. Usually I use the shell command sdmount to mount my container. So, my test would have been "sudo sdmount ...." If you prefer the graphical version, "sudo scramdisk" should work too. >> Your .deb file will be owned by root and be read-only, but >> that's not a problem for installation. >> >> I had to re-make ScramDisk last night because of a kernel >> upgrade. If I recall correctly, I just ran "make deb" >> without a plain "make" first. > Thanks for the help, Jonathan. > > Stewart > > > > > |
|
From: Stewart M. <smm...@gm...> - 2011-03-04 14:44:15
|
On Thu, 2011-03-03 at 19:10 -0500, Jonathan Coles wrote: > >> I have experienced the same thing. Try running the make as > >> root. That solved the problem for me. You might want to run > >> "make clean" first to make sure that everything gets rebuilt. > > When you say "trying running 'make' as root, do you mean: > > > > $ sudo make > Yes. *Eureka*! It worked! Thanks Jonathan. Compiling SD4L from source code proved to be surprisingly easy, like most riddles and problems--once you see the answer. Hans-Ulrich, I created the .deb file for 2.6.32-29 for Ubuntu. I would be happy to share any Scramdisk .deb files I create, provided that they are suitable for distribution. Reading this page, however, makes me wonder if they would be as-is when created on my system this way: https://wiki.ubuntu.com/PackagingGuide/Complete Some of these requirements I think you've already addressed in your distribution, but I'm such a "caveman" at this. I still think it would be wonderful if SD4L were included amongst the maintained Ubuntu program distribution, as it's better maintained than some programs that *are* listed. > >> You could even try starting your current ScramDisk -- the > >> one that has the problem -- as root. If it works, then there > >> really isn't another problem. Just remake the .deb as root > >> and reinstall. > > you mean: > > > > $ gksudo scramdisk > > > > I take it? > I use sudo when I need root powers. I'm not sure what the > difference is between sudo and gksudo. > Usually I use the shell command sdmount to mount my container. > So, my test would have been "sudo sdmount ...." > If you prefer the graphical version, "sudo scramdisk" should > work too. http://www.psychocats.net/ubuntu/graphicalsudo Explains the difference, and why it's generally better to use gksudo instead of sudo for graphical applications. Once again, thanks for all the help. Stewart |
|
From: Stewart M. <smm...@gm...> - 2011-03-26 14:26:46
|
On Wed, 2011-03-02 at 06:51 -0500, Jonathan Coles wrote: > Using version 2.1-0 built on kernel 2.6.35-28-generic (AMD > 64-bit), I find container creation is very slow. It took 45 > minutes to create a 10G TrueCrypt 7 partition on an external > USB drive. > > Is this normal? > > The disk drive light shows a second or so of activity every > 30 seconds. When the operating system formats a partition, > the disk is continuously active for the few minutes required > to complete the task. > > Thanks. I successfully created a 40 GB Scramdisk container on an external hard drive yesterday (kernel 2.6.32-30, Ubuntu 10.04, ext3 file system inside the container, external hard drive NTFS format). I can verify that the procedure took (in my case) hours. Also, on an external hard drive (FAT32) so far I've not been able to create any sizeable Truecrypt container. (Caveat: I did successfully create a small one, 15 MB, by mistake). SD4L quits when encrypting about 25 % through or so and tells me "unable to create backup file". Again I'm using ext3 as the file format inside the container. Thinking that this could be a permissions problem, I'm trying to see if I can create the same container on my computer's internal HD and seeing how that goes. I'll post the results. Stewart |
|
From: Stewart M. <smm...@gm...> - 2011-03-26 14:59:41
|
On Sat, 2011-03-26 at 10:26 -0400, Stewart Millen wrote: > On Wed, 2011-03-02 at 06:51 -0500, Jonathan Coles wrote: > > > Using version 2.1-0 built on kernel 2.6.35-28-generic (AMD > > 64-bit), I find container creation is very slow. It took 45 > > minutes to create a 10G TrueCrypt 7 partition on an external > > USB drive. > > > > Is this normal? > > > > The disk drive light shows a second or so of activity every > > 30 seconds. When the operating system formats a partition, > > the disk is continuously active for the few minutes required > > to complete the task. > > > > Thanks. > > I successfully created a 40 GB Scramdisk container on an external hard drive yesterday (kernel 2.6.32-30, Ubuntu 10.04, ext3 file system inside the container, external hard drive NTFS format). I can verify that the procedure took (in my case) hours. > > Also, on an external hard drive (FAT32) so far I've not been able to create any sizeable Truecrypt container. (Caveat: I did successfully create a small one, 15 MB, by mistake). SD4L quits when encrypting about 25 % through or so and tells me "unable to create backup file". Again I'm using ext3 as the file format inside the container. > > Thinking that this could be a permissions problem, I'm trying to see if I can create the same container on my computer's internal HD and seeing how that goes. I'll post the results. > > Stewart It worked on my local hard drive. So it's probably a permissions problem. My time for a 15 GB container is similar to yours. Stewart |
|
From: Stewart M. <smm...@gm...> - 2011-03-02 05:24:09
|
On Tue, 2011-03-01 at 23:32 -0500, Stewart Millen wrote:
I went and installed the latest version for 2.6.32-28, from the .deb
file prepared by Hans-Ulrich, to get my system working again.
I then went back into 2.6.32-29, and did the following, this time making
sure to set the terminal so that it would capture all the text. There
seemed to be a lot of errors and warnings in the document creation step,
but the documents are there as .pdf files, and they look fine. Somehow I
wonder if I'm not compiling things into the kernel sources, but the
output seems to indicate that I am.
I went no further after "make" command for you guys to peruse the
output. Thank you for the help so far.
Stewart
stimpy@stimpys-desktop:~$ cd /usr/src/linux
stimpy@stimpys-desktop:/usr/src/linux$ uname -r
2.6.32-29-generic
stimpy@stimpys-desktop:/usr/src/linux$ sudo apt-get install
linux-headers-generic
[sudo] password for stimpy:
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-generic is already the newest version.
The following packages were automatically installed and are no longer
required:
libaccess-bridge-java-jni libaccess-bridge-java
Use 'apt-get autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
stimpy@stimpys-desktop:/usr/src/linux$ tar xvzf ScramDisk_2.1-0.tar.gz
ScramDisk-2.1/
ScramDisk-2.1/scramdisk.spec
ScramDisk-2.1/COPYING
ScramDisk-2.1/prerm
ScramDisk-2.1/scramdisk-mo.spec
ScramDisk-2.1/scramdisk-fc.spec
ScramDisk-2.1/postinst
ScramDisk-2.1/changelog.Debian
ScramDisk-2.1/copyright
ScramDisk-2.1/changelog
ScramDisk-2.1/Makefile
ScramDisk-2.1/gui/
ScramDisk-2.1/gui/formatdialog.cpp
ScramDisk-2.1/gui/scramdisk.pro
ScramDisk-2.1/gui/rnd.cpp
ScramDisk-2.1/gui/change.png
ScramDisk-2.1/gui/mount.png
ScramDisk-2.1/gui/scramdisk.png
ScramDisk-2.1/gui/create.png
ScramDisk-2.1/gui/scramdisk.h
ScramDisk-2.1/gui/reformat.png
ScramDisk-2.1/gui/name_utils.h
ScramDisk-2.1/gui/reformatdialog.cpp
ScramDisk-2.1/gui/name_utils.cpp
ScramDisk-2.1/gui/ppdialog.h
ScramDisk-2.1/gui/reformatdialog.h
ScramDisk-2.1/gui/scramdisk_de.ts
ScramDisk-2.1/gui/umount.png
ScramDisk-2.1/gui/ppdialog.cpp
ScramDisk-2.1/gui/formatdialog.h
ScramDisk-2.1/gui/createdialog.cpp
ScramDisk-2.1/gui/rnd.h
ScramDisk-2.1/gui/scramdisk.cpp
ScramDisk-2.1/gui/createdialog.h
ScramDisk-2.1/driver/
ScramDisk-2.1/driver/version.h
ScramDisk-2.1/driver/volume.c
ScramDisk-2.1/driver/sddriver.c
ScramDisk-2.1/driver/sddriver.h
ScramDisk-2.1/driver/tweak.h
ScramDisk-2.1/driver/digest.h
ScramDisk-2.1/driver/sector.c
ScramDisk-2.1/driver/tweak.c
ScramDisk-2.1/driver/volume.h
ScramDisk-2.1/driver/cipher.h
ScramDisk-2.1/driver/modules.order
ScramDisk-2.1/driver/sector.h
ScramDisk-2.1/driver/Makefile
ScramDisk-2.1/driver/digest.c
ScramDisk-2.1/driver/cipher.c
ScramDisk-2.1/driver/sdstructs.h
ScramDisk-2.1/driver/sdmount.h
ScramDisk-2.1/control
ScramDisk-2.1/crypto/
ScramDisk-2.1/crypto/des-mktab.c
ScramDisk-2.1/crypto/square.c
ScramDisk-2.1/crypto/twofish-mktab.c
ScramDisk-2.1/crypto/cast-tab.h
ScramDisk-2.1/crypto/gf2e64.c
ScramDisk-2.1/crypto/sha256.h
ScramDisk-2.1/crypto/serpent.c
ScramDisk-2.1/crypto/serpent.h
ScramDisk-2.1/crypto/sha256.c
ScramDisk-2.1/crypto/tea.c
ScramDisk-2.1/crypto/sha512.c
ScramDisk-2.1/crypto/des.c
ScramDisk-2.1/crypto/des.h
ScramDisk-2.1/crypto/des3.h
ScramDisk-2.1/crypto/des3.c
ScramDisk-2.1/crypto/getiv.h
ScramDisk-2.1/crypto/des-base.h
ScramDisk-2.1/crypto/rijndael.h
ScramDisk-2.1/crypto/cast128.c
ScramDisk-2.1/crypto/getiv.c
ScramDisk-2.1/crypto/whirlpool.h
ScramDisk-2.1/crypto/square.h
ScramDisk-2.1/crypto/des-base.c
ScramDisk-2.1/crypto/block.h
ScramDisk-2.1/crypto/cast128.h
ScramDisk-2.1/crypto/rmd160.c
ScramDisk-2.1/crypto/rijndael.c
ScramDisk-2.1/crypto/rmd160.h
ScramDisk-2.1/crypto/square-mktab.c
ScramDisk-2.1/crypto/gf2e64.h
ScramDisk-2.1/crypto/tea.h
ScramDisk-2.1/crypto/rijndael-mktab.c
ScramDisk-2.1/crypto/twofish.c
ScramDisk-2.1/crypto/bits.h
ScramDisk-2.1/crypto/blowfish.h
ScramDisk-2.1/crypto/blowfish.c
ScramDisk-2.1/crypto/blowfish-mktab.c
ScramDisk-2.1/crypto/whirlpool.c
ScramDisk-2.1/crypto/hash.h
ScramDisk-2.1/crypto/sha1.c
ScramDisk-2.1/crypto/cast-base.h
ScramDisk-2.1/crypto/Makefile
ScramDisk-2.1/crypto/gf2e128.h
ScramDisk-2.1/crypto/serpent-sbox.h
ScramDisk-2.1/crypto/crc32.h
ScramDisk-2.1/crypto/sha1.h
ScramDisk-2.1/crypto/gf2e128.c
ScramDisk-2.1/crypto/crc32-mktab.c
ScramDisk-2.1/crypto/crc32.c
ScramDisk-2.1/crypto/twofish.h
ScramDisk-2.1/crypto/sha512.h
ScramDisk-2.1/postrm
ScramDisk-2.1/docs/
ScramDisk-2.1/docs/tcppdialog_de.eps
ScramDisk-2.1/docs/mount_de.html
ScramDisk-2.1/docs/reformat.eps
ScramDisk-2.1/docs/bookmarks_de.html
ScramDisk-2.1/docs/config_de.html
ScramDisk-2.1/docs/intro_en.html
ScramDisk-2.1/docs/ppdialog_de.jpg
ScramDisk-2.1/docs/config_de.jpg
ScramDisk-2.1/docs/config_de.eps
ScramDisk-2.1/docs/create_de.jpg
ScramDisk-2.1/docs/ppdialog.jpg
ScramDisk-2.1/docs/config.eps
ScramDisk-2.1/docs/reformat_de.jpg
ScramDisk-2.1/docs/create_en.html
ScramDisk-2.1/docs/scramdisk.1
ScramDisk-2.1/docs/index_de.html
ScramDisk-2.1/docs/index_en.html
ScramDisk-2.1/docs/change_en.html
ScramDisk-2.1/docs/bookmarks_en.html
ScramDisk-2.1/docs/scramdisk_de.tex
ScramDisk-2.1/docs/tcppdialog.jpg
ScramDisk-2.1/docs/create_de.eps
ScramDisk-2.1/docs/tcppdialog.eps
ScramDisk-2.1/docs/gui.jpg
ScramDisk-2.1/docs/reformat.jpg
ScramDisk-2.1/docs/config_en.html
ScramDisk-2.1/docs/gui_de.eps
ScramDisk-2.1/docs/intro_de.html
ScramDisk-2.1/docs/create.jpg
ScramDisk-2.1/docs/Makefile
ScramDisk-2.1/docs/scramdisk.tex
ScramDisk-2.1/docs/create_de.html
ScramDisk-2.1/docs/ppdialog.eps
ScramDisk-2.1/docs/ppdialog_de.eps
ScramDisk-2.1/docs/tccreate.eps
ScramDisk-2.1/docs/gui.eps
ScramDisk-2.1/docs/tccreate_de.jpg
ScramDisk-2.1/docs/create.eps
ScramDisk-2.1/docs/mount_en.html
ScramDisk-2.1/docs/tccreate_de.eps
ScramDisk-2.1/docs/reformat_de.eps
ScramDisk-2.1/docs/tcppdialog_de.jpg
ScramDisk-2.1/docs/tccreate.jpg
ScramDisk-2.1/docs/gui_de.jpg
ScramDisk-2.1/docs/config.jpg
ScramDisk-2.1/docs/change_de.html
ScramDisk-2.1/utils/
ScramDisk-2.1/utils/scramdisk.mknods
ScramDisk-2.1/utils/args.h
ScramDisk-2.1/utils/sdhelper.cpp
ScramDisk-2.1/utils/rnd.cpp
ScramDisk-2.1/utils/mtab.h
ScramDisk-2.1/utils/sdinfo.h
ScramDisk-2.1/utils/tweak.h
ScramDisk-2.1/utils/digest.h
ScramDisk-2.1/utils/tcctx.h
ScramDisk-2.1/utils/sdmnt.cpp
ScramDisk-2.1/utils/sdchange.cpp
ScramDisk-2.1/utils/tweak.cpp
ScramDisk-2.1/utils/sdctx.h
ScramDisk-2.1/utils/cipher.h
ScramDisk-2.1/utils/process.cpp
ScramDisk-2.1/utils/sdpw.cpp
ScramDisk-2.1/utils/mtab.cpp
ScramDisk-2.1/utils/args.cpp
ScramDisk-2.1/utils/digest.cpp
ScramDisk-2.1/utils/sdcreate.cpp
ScramDisk-2.1/utils/sdmount.cpp
ScramDisk-2.1/utils/process.h
ScramDisk-2.1/utils/scramdisk.init
ScramDisk-2.1/utils/rnd.h
ScramDisk-2.1/utils/sdinfo.cpp
ScramDisk-2.1/utils/Makefile
ScramDisk-2.1/utils/scramdiskrc
ScramDisk-2.1/utils/sdpw.h
ScramDisk-2.1/utils/sdumount.cpp
ScramDisk-2.1/utils/sdreformat.cpp
ScramDisk-2.1/utils/tcctx.cpp
ScramDisk-2.1/utils/cipher.cpp
ScramDisk-2.1/utils/sdctx.cpp
ScramDisk-2.1/utils/sdmnt.h
ScramDisk-2.1/conffiles
stimpy@stimpys-desktop:/usr/src/linux$ ls -l
total 1400
drwxr-sr-x 7 stimpy src 4096 2011-02-13 07:56 ScramDisk-2.1
-rw-r--r-- 1 stimpy src 1421680 2011-02-17 07:16 ScramDisk_2.1-0.tar.gz
stimpy@stimpys-desktop:/usr/src/linux$ cd /usr/src/linux/ScramDisk-2.1
stimpy@stimpys-desktop:/usr/src/linux/ScramDisk-2.1$ make
cd gui && qmake && lrelease scramdisk_de.ts
echo "#define KERNEL_BUILD \"2.6.32\"" > driver/kernel_build.h
list='crypto driver utils gui docs'; for subdir in $list; \
do make -C $subdir all || exit 1; done
make[1]: Entering directory `/usr/src/linux/ScramDisk-2.1/crypto'
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o getiv.o getiv.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o gf2e64.o gf2e64.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o gf2e128.o gf2e128.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o crc32.o crc32.c
gcc -I. -O2 -Wall -o crc32-mktab crc32-mktab.c
./crc32-mktab -p 0x04c11db7 -b 32 -B 8 -r -c \
-s crc32_table -i crc32.h -t uint32 -o crc32-tab.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o crc32-tab.o crc32-tab.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o sha1.o sha1.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o sha256.o sha256.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o sha512.o sha512.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o rmd160.o rmd160.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o whirlpool.o whirlpool.c
gcc -I. -O2 -Wall -o blowfish-mktab blowfish-mktab.c
./blowfish-mktab > blowfish-tab.h
[.............................................................]
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o blowfish.o blowfish.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o cast128.o cast128.c
gcc -I. -O2 -Wall -o des-mktab des-mktab.c
./des-mktab > des-tab.h
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o des-base.o des-base.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o des.o des.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o des3.o des3.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o tea.o tea.c
gcc -I. -O2 -Wall -o rijndael-mktab rijndael-mktab.c
./rijndael-mktab > rijndael-tab.h
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o rijndael.o rijndael.c
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o serpent.o serpent.c
gcc -I. -O2 -Wall -o square-mktab square-mktab.c
./square-mktab > square-tab.h
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o square.o square.c
square.c: In function ‘square_init’:
square.c:91: warning: array subscript is above array bounds
square.c:91: warning: ‘kk’ may be used uninitialized in this function
gcc -I. -O2 -Wall -o twofish-mktab twofish-mktab.c
./twofish-mktab > twofish-tab.h
gcc -I. -I/usr/src/linux/include -O2 -Wall -c -o twofish.o twofish.c
ar rc libsdcrypto.a getiv.o gf2e64.o gf2e128.o crc32.o crc32-tab.o
sha1.o sha256.o sha512.o rmd160.o whirlpool.o blowfish.o cast128.o
des-base.o des.o des3.o tea.o rijndael.o serpent.o square.o twofish.o
ranlib libsdcrypto.a
make[1]: Leaving directory `/usr/src/linux/ScramDisk-2.1/crypto'
make[1]: Entering directory `/usr/src/linux/ScramDisk-2.1/driver'
ln -s ../crypto/crc32.c crc32.c
ln -s ../crypto/crc32-tab.c crc32-tab.c
ln -s ../crypto/sha1.c sha1.c
ln -s ../crypto/sha256.c sha256.c
ln -s ../crypto/sha512.c sha512.c
ln -s ../crypto/rmd160.c rmd160.c
ln -s ../crypto/whirlpool.c whirlpool.c
ln -s ../crypto/blowfish.c blowfish.c
ln -s ../crypto/cast128.c cast128.c
ln -s ../crypto/des-base.c des-base.c
ln -s ../crypto/des.c des.c
ln -s ../crypto/des3.c des3.c
ln -s ../crypto/tea.c tea.c
ln -s ../crypto/rijndael.c rijndael.c
ln -s ../crypto/serpent.c serpent.c
ln -s ../crypto/square.c square.c
ln -s ../crypto/twofish.c twofish.c
ln -s ../crypto/gf2e64.c gf2e64.c
ln -s ../crypto/gf2e128.c gf2e128.c
ln -s ../crypto/getiv.c getiv.c
make -C /lib/modules/2.6.32-29-generic/build
SUBDIRS=/usr/src/linux/ScramDisk-2.1/driver modules
make[2]: Entering directory `/usr/src/linux-headers-2.6.32-29-generic'
CC [M] /usr/src/linux/ScramDisk-2.1/driver/cipher.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/digest.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/tweak.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/sector.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/volume.o
/usr/src/linux/ScramDisk-2.1/driver/volume.c: In function
‘truecrypt_mount_container’:
/usr/src/linux/ScramDisk-2.1/driver/volume.c:775: warning: the frame
size of 1396 bytes is larger than 1024 bytes
/usr/src/linux/ScramDisk-2.1/driver/volume.c: In function
‘scramdisk_mount_container’:
/usr/src/linux/ScramDisk-2.1/driver/volume.c:374: warning: the frame
size of 1604 bytes is larger than 1024 bytes
CC [M] /usr/src/linux/ScramDisk-2.1/driver/sddriver.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/crc32.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/crc32-tab.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/sha1.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/sha256.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/sha512.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/rmd160.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/whirlpool.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/blowfish.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/cast128.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/des-base.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/des.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/des3.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/tea.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/rijndael.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/serpent.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/square.o
/usr/src/linux/ScramDisk-2.1/driver/square.c: In function ‘square_init’:
/usr/src/linux/ScramDisk-2.1/driver/square.c:91: warning: array
subscript is above array bounds
/usr/src/linux/ScramDisk-2.1/driver/square.c:91: warning: ‘kk’ may be
used uninitialized in this function
CC [M] /usr/src/linux/ScramDisk-2.1/driver/twofish.o
/usr/src/linux/ScramDisk-2.1/driver/twofish.c: In function
‘twofish_fkinit’:
/usr/src/linux/ScramDisk-2.1/driver/twofish.c:315: warning: the frame
size of 4288 bytes is larger than 1024 bytes
CC [M] /usr/src/linux/ScramDisk-2.1/driver/gf2e64.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/gf2e128.o
CC [M] /usr/src/linux/ScramDisk-2.1/driver/getiv.o
LD [M] /usr/src/linux/ScramDisk-2.1/driver/scramdisk.o
Building modules, stage 2.
MODPOST 1 modules
CC /usr/src/linux/ScramDisk-2.1/driver/scramdisk.mod.o
LD [M] /usr/src/linux/ScramDisk-2.1/driver/scramdisk.ko
make[2]: Leaving directory `/usr/src/linux-headers-2.6.32-29-generic'
make[1]: Leaving directory `/usr/src/linux/ScramDisk-2.1/driver'
make[1]: Entering directory `/usr/src/linux/ScramDisk-2.1/utils'
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdmount.o sdmount.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o mtab.o mtab.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o args.o args.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdpw.o sdpw.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdmnt.o sdmnt.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdinfo.o sdinfo.cpp
g++ -o sdmount sdmount.o mtab.o args.o sdpw.o sdmnt.o sdinfo.o
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdumount.o sdumount.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o process.o process.cpp
g++ -o sdumount sdumount.o process.o mtab.o args.o sdmnt.o sdinfo.o
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdcreate.o sdcreate.cpp
sdcreate.cpp: In function ‘int main(int, char**)’:
sdcreate.cpp:849: warning: ignoring return value of ‘int chown(const
char*, __uid_t, __gid_t)’, declared with attribute warn_unused_result
sdcreate.cpp:851: warning: ignoring return value of ‘int chown(const
char*, __uid_t, __gid_t)’, declared with attribute warn_unused_result
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o rnd.o rnd.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdctx.o sdctx.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o tcctx.o tcctx.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o tweak.o tweak.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o cipher.o cipher.cpp
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o digest.o digest.cpp
g++ -o sdcreate sdcreate.o process.o args.o rnd.o sdpw.o sdmnt.o sdctx.o
tcctx.o tweak.o cipher.o digest.o -L../crypto -lsdcrypto
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdchange.o sdchange.cpp
g++ -o sdchange sdchange.o sdctx.o tcctx.o args.o rnd.o sdpw.o tweak.o
cipher.o digest.o -L../crypto -lsdcrypto
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdreformat.o
sdreformat.cpp
g++ -o sdreformat sdreformat.o sdctx.o tcctx.o args.o rnd.o sdpw.o
tweak.o cipher.o digest.o -L../crypto -lsdcrypto
g++ -I. -I../crypto -I../driver -O2 -Wall -c -o sdhelper.o sdhelper.cpp
g++ -o sdhelper sdhelper.o mtab.o sdmnt.o sdinfo.o -L../crypto
-lsdcrypto
ar rc libsdutils.a cipher.o digest.o tweak.o sdctx.o tcctx.o sdinfo.o
sdmnt.o mtab.o
ranlib libsdutils.a
make[1]: Leaving directory `/usr/src/linux/ScramDisk-2.1/utils'
make[1]: Entering directory `/usr/src/linux/ScramDisk-2.1/gui'
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o scramdisk.o scramdisk.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o createdialog.o createdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o formatdialog.o formatdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o reformatdialog.o reformatdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o ppdialog.o ppdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o name_utils.o name_utils.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o rnd.o rnd.cpp
/usr/share/qt3/bin/moc scramdisk.h -o moc_scramdisk.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o moc_scramdisk.o moc_scramdisk.cpp
/usr/share/qt3/bin/moc createdialog.h -o moc_createdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o moc_createdialog.o moc_createdialog.cpp
/usr/share/qt3/bin/moc formatdialog.h -o moc_formatdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o moc_formatdialog.o moc_formatdialog.cpp
/usr/share/qt3/bin/moc reformatdialog.h -o moc_reformatdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o moc_reformatdialog.o moc_reformatdialog.cpp
/usr/share/qt3/bin/moc ppdialog.h -o moc_ppdialog.cpp
g++ -c -pipe -g -Wall -W -O2 -D_REENTRANT -DQT_NO_DEBUG
-DQT_THREAD_SUPPORT -DQT_SHARED -DQT_TABLET_SUPPORT
-I/usr/share/qt3/mkspecs/default -I. -I../crypto -I../driver -I../utils
-I../../../../include/qt3 -o moc_ppdialog.o moc_ppdialog.cpp
g++ -o scramdisk scramdisk.o createdialog.o formatdialog.o
reformatdialog.o ppdialog.o name_utils.o rnd.o moc_scramdisk.o
moc_createdialog.o moc_formatdialog.o moc_reformatdialog.o
moc_ppdialog.o -L/usr/share/qt3/lib -L/usr/X11R6/lib -L../utils
-L../crypto -lsdutils -lsdcrypto -lqt-mt -lXext -lX11 -lm -lpthread
make[1]: Leaving directory `/usr/src/linux/ScramDisk-2.1/gui'
make[1]: Entering directory `/usr/src/linux/ScramDisk-2.1/docs'
gzip -9 -c scramdisk.1 > scramdisk.1.gz
ps2pdf gui.eps gui.pdf
ln -s gui.pdf `echo gui.eps | sed 's/.eps/-eps-converted-to.pdf/'`
ps2pdf create.eps create.pdf
ln -s create.pdf `echo create.eps | sed 's/.eps/-eps-converted-to.pdf/'`
ps2pdf tccreate.eps tccreate.pdf
ln -s tccreate.pdf `echo tccreate.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf reformat.eps reformat.pdf
ln -s reformat.pdf `echo reformat.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf ppdialog.eps ppdialog.pdf
ln -s ppdialog.pdf `echo ppdialog.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf tcppdialog.eps tcppdialog.pdf
ln -s tcppdialog.pdf `echo tcppdialog.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf config.eps config.pdf
ln -s config.pdf `echo config.eps | sed 's/.eps/-eps-converted-to.pdf/'`
pdflatex scramdisk.tex && pdflatex scramdisk.tex
This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
restricted \write18 enabled.
entering extended mode
(./scramdisk.tex
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, usenglishmax,
dumylang, noh
yphenation, ngerman, german, german-x-2009-06-19, ngerman-x-2009-06-19,
loaded.
(/usr/share/texmf-texlive/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texmf-texlive/tex/latex/base/size11.clo))
(/usr/share/texmf-texlive/tex/latex/psnfss/times.sty)
(/usr/share/texmf-texlive/tex/latex/graphics/epsfig.sty
(/usr/share/texmf-texlive/tex/latex/graphics/graphicx.sty
(/usr/share/texmf-texlive/tex/latex/graphics/keyval.sty)
(/usr/share/texmf-texlive/tex/latex/graphics/graphics.sty
(/usr/share/texmf-texlive/tex/latex/graphics/trig.sty)
(/etc/texmf/tex/latex/config/graphics.cfg)
(/usr/share/texmf-texlive/tex/latex/pdftex-def/pdftex.def))))
(/usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf.sty
(/usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf-base.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/infwarerr.sty)
(/usr/share/texmf-texlive/tex/latex/oberdiek/grfext.sty)
(/usr/share/texmf-texlive/tex/latex/oberdiek/kvoptions.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/kvsetkeys.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/etexcmds.sty)))
(/usr/share/texmf-texlive/tex/generic/oberdiek/pdftexcmds.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/ifluatex.sty)
(/usr/share/texmf-texlive/tex/generic/oberdiek/ltxcmds.sty))
(/usr/share/texmf-texlive/tex/latex/latexconfig/epstopdf-sys.cfg)))
(/usr/share/texmf-texlive/tex/latex/tools/longtable.sty)
No file scramdisk.aux.
(/usr/share/texmf-texlive/tex/latex/psnfss/ot1ptm.fd)
(/usr/share/texmf-texlive/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}]
No file scramdisk.toc.
[2] (/usr/share/texmf-texlive/tex/latex/psnfss/ot1pcr.fd) [3] [4]
<gui-eps-converted-to.pdf, id=20, 614.295pt x 794.97pt>
<use gui-eps-converted-to.pdf> [5 <./gui-eps-converted-to.pdf>] [6]
<create-eps-converted-to.pdf, id=32, 614.295pt x 794.97pt>
<use create-eps-converted-to.pdf> [7 <./create-eps-converted-to.pdf>]
<tccreate-eps-converted-to.pdf, id=42, 614.295pt x 794.97pt>
<use tccreate-eps-converted-to.pdf>
<ppdialog-eps-converted-to.pdf, id=44, 614.295pt x 794.97pt>
<use ppdialog-eps-converted-to.pdf>
<tcppdialog-eps-converted-to.pdf, id=46, 614.295pt x 794.97pt>
<use tcppdialog-eps-converted-to.pdf> [8
<./tccreate-eps-converted-to.pdf> <./p
pdialog-eps-converted-to.pdf>] [9 <./tcppdialog-eps-converted-to.pdf>]
<reformat-eps-converted-to.pdf, id=66, 614.295pt x 794.97pt>
<use reformat-eps-converted-to.pdf> [10
<./reformat-eps-converted-to.pdf>]
<config-eps-converted-to.pdf, id=75, 614.295pt x 794.97pt>
<use config-eps-converted-to.pdf> [11 <./config-eps-converted-to.pdf>]
[12]
LaTeX Warning: Reference `t-mount-param' on page 13 undefined on input
line 628
.
Underfull \hbox (badness 10000) in paragraph at lines 637--637
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 640--640
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 640--640
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 640--642
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 640--642
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 640--642
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 647--650
[]|\OT1/ptm/m/n/10.95 format of the con-tainer to
Underfull \hbox (badness 10000) in paragraph at lines 647--650
\OT1/ptm/m/n/10.95 be mounted (\OT1/pcr/m/n/9 truecrypt4
\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 647--650
\OT1/pcr/m/n/9 truecrypt5\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 truecrypt6
\OT1/pt
m/m/n/10.95 and
Underfull \hbox (badness 1460) in paragraph at lines 647--650
\OT1/pcr/m/n/9 truecrypt7 \OT1/ptm/m/n/10.95 are syn-onymic with
Underfull \hbox (badness 10000) in paragraph at lines 651--651
[]|\OT1/pcr/m/n/9 -mount-
Underfull \hbox (badness 10000) in paragraph at lines 653--653
[]|\OT1/pcr/m/n/9 -default-
Overfull \hbox (2.79996pt too wide) in paragraph at lines 653--653
[]|\OT1/pcr/m/n/9 -defmnt|
Underfull \hbox (badness 5490) in paragraph at lines 654--656
[]|\OT1/ptm/m/n/10.95 mount the con-tainer on a di-
Underfull \hbox (badness 10000) in paragraph at lines 654--656
\OT1/ptm/m/n/10.95 rec-tory au-to-mat-i-cally cho-sen
Underfull \hbox (badness 10000) in paragraph at lines 654--656
\OT1/ptm/m/n/10.95 from \OT1/pcr/m/n/9 /media/scramdisk01 $[]$
Underfull \hbox (badness 7291) in paragraph at lines 665--666
\OT1/ptm/m/n/10.95 swap-ping (if \OT1/pcr/m/n/9 -partitions
\OT1/ptm/m/n/10.95
has
Underfull \hbox (badness 10000) in paragraph at lines 669--671
[]|\OT1/pcr/m/n/9 auto\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 ext2
\OT1/ptm/m/n/10.9
5 , \OT1/pcr/m/n/9 ext3\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 672--674
[]|\OT1/ptm/m/n/10.95 type of the filesys-tem to be
Underfull \hbox (badness 3954) in paragraph at lines 672--674
\OT1/ptm/m/n/10.95 ac-tual type will be de-ter-mined
Underfull \hbox (badness 10000) in paragraph at lines 675--675
[]|\OT1/ptm/m/n/10.95 no
Underfull \hbox (badness 3019) in paragraph at lines 676--678
\OT1/ptm/m/n/10.95 op-er-a-tions have taken place on
Package longtable Warning: Column widths have changed
(longtable) in table 2 on input line 687.
[13]
LaTeX Warning: Reference `t-umount-param' on page 14 undefined on input
line 69
4.
Underfull \vbox (badness 10000) has occurred while \output is active
[14]
Underfull \hbox (badness 10000) in paragraph at lines 701--701
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 704--704
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 704--704
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 704--706
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 704--706
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 704--706
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 709--709
[]|\OT1/pcr/m/n/9 -mount-
Underfull \hbox (badness 1062) in paragraph at lines 711--713
\OT1/ptm/m/n/10.95 ker-nel which makes sense if no
Underfull \hbox (badness 10000) in paragraph at lines 721--721
[]|\OT1/pcr/m/n/9 -fusr-
Package longtable Warning: Column widths have changed
(longtable) in table 3 on input line 728.
[15]
LaTeX Warning: Reference `t-create-param' on page 16 undefined on input
line 75
6.
Underfull \hbox (badness 10000) in paragraph at lines 768--768
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 771--771
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 771--771
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 771--773
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 771--773
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 771--773
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 776--777
[]|\OT1/pcr/m/n/9 scramdisk\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 776--777
\OT1/pcr/m/n/9 truecrypt4\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 776--777
\OT1/pcr/m/n/9 truecrypt5\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 776--777
\OT1/pcr/m/n/9 truecrypt6\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 779--780
[]|\OT1/pcr/m/n/9 ripemd160\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 sha1
\OT1/ptm/m/n
/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 779--780
\OT1/pcr/m/n/9 sha256\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 sha512
\OT1/ptm/m/n/10.
95 ,
Underfull \hbox (badness 10000) in paragraph at lines 781--783
[]|\OT1/ptm/m/n/10.95 algorithm for hash-ing the
Underfull \hbox (badness 10000) in paragraph at lines 781--783
\OT1/ptm/m/n/10.95 passphrase, \OT1/pcr/m/n/9 sha256 \OT1/ptm/m/n/10.95
isn't s
up-
Underfull \hbox (badness 5592) in paragraph at lines 784--792
\OT1/pcr/m/n/9 des\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 des3
\OT1/ptm/m/n/10.95 ,
\OT1/pcr/m/n/9 serpent\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/ptm/m/n/10.95 for ScramDisk and
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 aes\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 blowfish
\OT1/ptm/m/n/10.9
5 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 serpent/twofish\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 twofish/aes\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 serpent/twofish/aes
Underfull \hbox (badness 3492) in paragraph at lines 793--794
\OT1/ptm/m/n/10.95 cryp-tion, \OT1/pcr/m/n/9 blowfish
\OT1/ptm/m/n/10.95 , \OT1/
pcr/m/n/9 cast5 \OT1/ptm/m/n/10.95 and
Underfull \hbox (badness 1270) in paragraph at lines 793--794
\OT1/pcr/m/n/9 des3\OT1/ptm/m/n/10.95 , aren't sup-ported by True-
Underfull \hbox (badness 10000) in paragraph at lines 803--805
\OT1/pcr/m/n/9 minix\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 ntfs
\OT1/ptm/m/n/10.95
, \OT1/pcr/m/n/9 vfat\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 807--807
[]|\OT1/pcr/m/n/9 -mkfs-
Underfull \hbox (badness 10000) in paragraph at lines 811--811
[]|\OT1/pcr/m/n/9 -mkswap-
Underfull \hbox (badness 10000) in paragraph at lines 813--813
[]|\OT1/pcr/m/n/9 -win-
Underfull \hbox (badness 2245) in paragraph at lines 817--817
[]|\OT1/ptm/m/n/10.95 create a hid-den True-Crypt con-
[16]
Package longtable Warning: Column widths have changed
(longtable) in table 4 on input line 830.
LaTeX Warning: Reference `t-change-param' on page 17 undefined on input
line 83
5.
Underfull \hbox (badness 10000) in paragraph at lines 842--842
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 845--845
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 845--845
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 845--847
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 845--847
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 845--847
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 4872) in paragraph at lines 852--852
[]|\OT1/ptm/m/n/10.95 format of the con-tainer to be
Underfull \hbox (badness 10000) in paragraph at lines 853--853
[]|\OT1/pcr/m/n/9 -use-
Package longtable Warning: Column widths have changed
(longtable) in table 5 on input line 862.
[17]
LaTeX Warning: Reference `t-reformat-param' on page 18 undefined on
input line
867.
Underfull \hbox (badness 10000) in paragraph at lines 874--874
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 877--877
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 877--877
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 877--879
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 877--879
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 877--879
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 882--883
[]|\OT1/pcr/m/n/9 truecrypt4\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 885--886
[]|\OT1/pcr/m/n/9 ripemd160\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 sha1
\OT1/ptm/m/n
/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 887--887
[]|\OT1/ptm/m/n/10.95 algorithm for hash-ing the
Underfull \hbox (badness 10000) in paragraph at lines 888--890
[]|\OT1/pcr/m/n/9 aes\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 blowfish
\OT1/ptm/m/n/1
0.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 888--890
\OT1/pcr/m/n/9 serpent/twofish\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 888--890
\OT1/pcr/m/n/9 twofish/aes\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 891--893
[]|\OT1/ptm/m/n/10.95 algorithm for en-cryp-tion and
Underfull \hbox (badness 5787) in paragraph at lines 891--893
\OT1/ptm/m/n/10.95 de-cryp-tion in the new for-mat,
Package longtable Warning: Column widths have changed
(longtable) in table 6 on input line 904.
[18] [19]
LaTeX Warning: Reference `t-scramdisk-header' on page 20 undefined on
input lin
e 977.
Overfull \hbox (2.5033pt too wide) in paragraph at lines 983--983
[]|\OT1/ptm/b/n/10.95 Position|
Package longtable Warning: Column widths have changed
(longtable) in table 7 on input line 1005.
LaTeX Warning: Reference `t-truecrypt4-header' on page 20 undefined on
input li
ne 1037.
LaTeX Warning: Reference `t-truecrypt5-header' on page 20 undefined on
input li
ne 1037.
LaTeX Warning: Reference `t-truecrypt6-header' on page 20 undefined on
input li
ne 1037.
LaTeX Warning: Reference `t-truecrypt7-header' on page 20 undefined on
input li
ne 1038.
[20]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1043--1043
[]|\OT1/ptm/b/n/10.95 Position|
Package longtable Warning: Column widths have changed
(longtable) in table 8 on input line 1068.
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1073--1073
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (1.49583pt too wide) in paragraph at lines 1098--1098
[]|\OT1/ptm/m/it/10.95 variable|
Package longtable Warning: Column widths have changed
(longtable) in table 9 on input line 1100.
[21]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1105--1105
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (1.49583pt too wide) in paragraph at lines 1135--1135
[]|\OT1/ptm/m/it/10.95 variable|
Package longtable Warning: Column widths have changed
(longtable) in table 10 on input line 1142.
[22]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1147--1147
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (1.49583pt too wide) in paragraph at lines 1179--1179
[]|\OT1/ptm/m/it/10.95 variable|
Package longtable Warning: Column widths have changed
(longtable) in table 11 on input line 1186.
[23] [24]
Overfull \hbox (16.3827pt too wide) in paragraph at lines 1261--1274
\OT1/ptm/m/n/10.95 is in-stalled in the di-rec-tory
\OT1/pcr/m/n/10.95 /sbin\OT
1/ptm/m/n/10.95 . A sam-ple con-fig-u-ra-tion file has been put to
\OT1/pcr/m/n
/10.95 /etc/scramdisk/scramdiskrc\OT1/ptm/m/n/10.95 .
[25] [26]
Package longtable Warning: Table widths have changed. Rerun LaTeX.
[27] (./scramdisk.aux)
LaTeX Warning: There were undefined references.
LaTeX Warning: Label(s) may have changed. Rerun to get cross-references
right.
)
(see the transcript file for additional
information){/usr/share/texmf-texlive/f
onts/enc/dvips/base/8r.enc}</usr/share/texmf-texlive/fonts/type1/public/amsfont
s/cm/cmmi10.pfb></usr/share/texmf-texlive/fonts/type1/public/amsfonts/cm/cmmi9.
pfb></usr/share/texmf-texlive/fonts/type1/public/amsfonts/cm/cmr10.pfb></usr/sh
are/texmf-texlive/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr/share/texmf-tex
live/fonts/type1/urw/courier/ucrr8a.pfb></usr/share/texmf-texlive/fonts/type1/u
rw/times/utmb8a.pfb></usr/share/texmf-texlive/fonts/type1/urw/times/utmbi8a.pfb
></usr/share/texmf-texlive/fonts/type1/urw/times/utmr8a.pfb></usr/share/texmf-t
exlive/fonts/type1/urw/times/utmri8a.pfb>
Output written on scramdisk.pdf (27 pages, 463282 bytes).
Transcript written on scramdisk.log.
This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
restricted \write18 enabled.
entering extended mode
(./scramdisk.tex
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, usenglishmax,
dumylang, noh
yphenation, ngerman, german, german-x-2009-06-19, ngerman-x-2009-06-19,
loaded.
(/usr/share/texmf-texlive/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texmf-texlive/tex/latex/base/size11.clo))
(/usr/share/texmf-texlive/tex/latex/psnfss/times.sty)
(/usr/share/texmf-texlive/tex/latex/graphics/epsfig.sty
(/usr/share/texmf-texlive/tex/latex/graphics/graphicx.sty
(/usr/share/texmf-texlive/tex/latex/graphics/keyval.sty)
(/usr/share/texmf-texlive/tex/latex/graphics/graphics.sty
(/usr/share/texmf-texlive/tex/latex/graphics/trig.sty)
(/etc/texmf/tex/latex/config/graphics.cfg)
(/usr/share/texmf-texlive/tex/latex/pdftex-def/pdftex.def))))
(/usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf.sty
(/usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf-base.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/infwarerr.sty)
(/usr/share/texmf-texlive/tex/latex/oberdiek/grfext.sty)
(/usr/share/texmf-texlive/tex/latex/oberdiek/kvoptions.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/kvsetkeys.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/etexcmds.sty)))
(/usr/share/texmf-texlive/tex/generic/oberdiek/pdftexcmds.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/ifluatex.sty)
(/usr/share/texmf-texlive/tex/generic/oberdiek/ltxcmds.sty))
(/usr/share/texmf-texlive/tex/latex/latexconfig/epstopdf-sys.cfg)))
(/usr/share/texmf-texlive/tex/latex/tools/longtable.sty)
(./scramdisk.aux)
(/usr/share/texmf-texlive/tex/latex/psnfss/ot1ptm.fd)
(/usr/share/texmf-texlive/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}]
(./scramdisk.toc)
[2] (/usr/share/texmf-texlive/tex/latex/psnfss/ot1pcr.fd) [3] [4]
<gui-eps-converted-to.pdf, id=20, 614.295pt x 794.97pt>
<use gui-eps-converted-to.pdf> [5 <./gui-eps-converted-to.pdf>] [6]
<create-eps-converted-to.pdf, id=32, 614.295pt x 794.97pt>
<use create-eps-converted-to.pdf> [7 <./create-eps-converted-to.pdf>]
<tccreate-eps-converted-to.pdf, id=42, 614.295pt x 794.97pt>
<use tccreate-eps-converted-to.pdf>
<ppdialog-eps-converted-to.pdf, id=44, 614.295pt x 794.97pt>
<use ppdialog-eps-converted-to.pdf>
<tcppdialog-eps-converted-to.pdf, id=46, 614.295pt x 794.97pt>
<use tcppdialog-eps-converted-to.pdf> [8
<./tccreate-eps-converted-to.pdf> <./p
pdialog-eps-converted-to.pdf>] [9 <./tcppdialog-eps-converted-to.pdf>]
<reformat-eps-converted-to.pdf, id=66, 614.295pt x 794.97pt>
<use reformat-eps-converted-to.pdf> [10
<./reformat-eps-converted-to.pdf>]
<config-eps-converted-to.pdf, id=75, 614.295pt x 794.97pt>
<use config-eps-converted-to.pdf> [11 <./config-eps-converted-to.pdf>]
[12]
Underfull \hbox (badness 10000) in paragraph at lines 637--637
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 640--640
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 640--640
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 640--642
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 640--642
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 640--642
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 647--650
[]|\OT1/ptm/m/n/10.95 format of the con-tainer to
Underfull \hbox (badness 10000) in paragraph at lines 647--650
\OT1/ptm/m/n/10.95 be mounted (\OT1/pcr/m/n/9 truecrypt4
\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 647--650
\OT1/pcr/m/n/9 truecrypt5\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 truecrypt6
\OT1/pt
m/m/n/10.95 and
Underfull \hbox (badness 1460) in paragraph at lines 647--650
\OT1/pcr/m/n/9 truecrypt7 \OT1/ptm/m/n/10.95 are syn-onymic with
Underfull \hbox (badness 10000) in paragraph at lines 651--651
[]|\OT1/pcr/m/n/9 -mount-
Underfull \hbox (badness 10000) in paragraph at lines 653--653
[]|\OT1/pcr/m/n/9 -default-
Overfull \hbox (2.79996pt too wide) in paragraph at lines 653--653
[]|\OT1/pcr/m/n/9 -defmnt|
Underfull \hbox (badness 5490) in paragraph at lines 654--656
[]|\OT1/ptm/m/n/10.95 mount the con-tainer on a di-
Underfull \hbox (badness 10000) in paragraph at lines 654--656
\OT1/ptm/m/n/10.95 rec-tory au-to-mat-i-cally cho-sen
Underfull \hbox (badness 10000) in paragraph at lines 654--656
\OT1/ptm/m/n/10.95 from \OT1/pcr/m/n/9 /media/scramdisk01 $[]$
Underfull \hbox (badness 7291) in paragraph at lines 665--666
\OT1/ptm/m/n/10.95 swap-ping (if \OT1/pcr/m/n/9 -partitions
\OT1/ptm/m/n/10.95
has
Underfull \hbox (badness 10000) in paragraph at lines 669--671
[]|\OT1/pcr/m/n/9 auto\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 ext2
\OT1/ptm/m/n/10.9
5 , \OT1/pcr/m/n/9 ext3\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 672--674
[]|\OT1/ptm/m/n/10.95 type of the filesys-tem to be
Underfull \hbox (badness 3954) in paragraph at lines 672--674
\OT1/ptm/m/n/10.95 ac-tual type will be de-ter-mined
Underfull \hbox (badness 10000) in paragraph at lines 675--675
[]|\OT1/ptm/m/n/10.95 no
Underfull \hbox (badness 3019) in paragraph at lines 676--678
\OT1/ptm/m/n/10.95 op-er-a-tions have taken place on
[13]
Underfull \vbox (badness 10000) has occurred while \output is active
[14]
Underfull \hbox (badness 10000) in paragraph at lines 701--701
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 704--704
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 704--704
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 704--706
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 704--706
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 704--706
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 709--709
[]|\OT1/pcr/m/n/9 -mount-
Underfull \hbox (badness 1062) in paragraph at lines 711--713
\OT1/ptm/m/n/10.95 ker-nel which makes sense if no
Underfull \hbox (badness 10000) in paragraph at lines 721--721
[]|\OT1/pcr/m/n/9 -fusr-
[15]
Underfull \hbox (badness 10000) in paragraph at lines 768--768
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 771--771
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 771--771
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 771--773
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 771--773
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 771--773
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 776--777
[]|\OT1/pcr/m/n/9 scramdisk\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 776--777
\OT1/pcr/m/n/9 truecrypt4\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 776--777
\OT1/pcr/m/n/9 truecrypt5\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 776--777
\OT1/pcr/m/n/9 truecrypt6\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 779--780
[]|\OT1/pcr/m/n/9 ripemd160\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 sha1
\OT1/ptm/m/n
/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 779--780
\OT1/pcr/m/n/9 sha256\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 sha512
\OT1/ptm/m/n/10.
95 ,
Underfull \hbox (badness 10000) in paragraph at lines 781--783
[]|\OT1/ptm/m/n/10.95 algorithm for hash-ing the
Underfull \hbox (badness 10000) in paragraph at lines 781--783
\OT1/ptm/m/n/10.95 passphrase, \OT1/pcr/m/n/9 sha256 \OT1/ptm/m/n/10.95
isn't s
up-
Underfull \hbox (badness 5592) in paragraph at lines 784--792
\OT1/pcr/m/n/9 des\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 des3
\OT1/ptm/m/n/10.95 ,
\OT1/pcr/m/n/9 serpent\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/ptm/m/n/10.95 for ScramDisk and
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 aes\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 blowfish
\OT1/ptm/m/n/10.9
5 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 serpent/twofish\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 twofish/aes\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 784--792
\OT1/pcr/m/n/9 serpent/twofish/aes
Underfull \hbox (badness 3492) in paragraph at lines 793--794
\OT1/ptm/m/n/10.95 cryp-tion, \OT1/pcr/m/n/9 blowfish
\OT1/ptm/m/n/10.95 , \OT1/
pcr/m/n/9 cast5 \OT1/ptm/m/n/10.95 and
Underfull \hbox (badness 1270) in paragraph at lines 793--794
\OT1/pcr/m/n/9 des3\OT1/ptm/m/n/10.95 , aren't sup-ported by True-
Underfull \hbox (badness 10000) in paragraph at lines 803--805
\OT1/pcr/m/n/9 minix\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 ntfs
\OT1/ptm/m/n/10.95
, \OT1/pcr/m/n/9 vfat\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 807--807
[]|\OT1/pcr/m/n/9 -mkfs-
Underfull \hbox (badness 10000) in paragraph at lines 811--811
[]|\OT1/pcr/m/n/9 -mkswap-
Underfull \hbox (badness 10000) in paragraph at lines 813--813
[]|\OT1/pcr/m/n/9 -win-
Underfull \hbox (badness 2245) in paragraph at lines 817--817
[]|\OT1/ptm/m/n/10.95 create a hid-den True-Crypt con-
[16]
Underfull \hbox (badness 10000) in paragraph at lines 842--842
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 845--845
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 845--845
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 845--847
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 845--847
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 845--847
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 4872) in paragraph at lines 852--852
[]|\OT1/ptm/m/n/10.95 format of the con-tainer to be
Underfull \hbox (badness 10000) in paragraph at lines 853--853
[]|\OT1/pcr/m/n/9 -use-
[17]
Underfull \hbox (badness 10000) in paragraph at lines 874--874
[]|\OT1/ptm/b/n/10.95 short
Underfull \hbox (badness 10000) in paragraph at lines 877--877
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 877--877
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 877--879
[]|\OT1/ptm/m/n/10.95 specific con-fig-u-ra-tion file to
Underfull \hbox (badness 5036) in paragraph at lines 877--879
\OT1/ptm/m/n/10.95 be used in place of the sys-
Underfull \hbox (badness 10000) in paragraph at lines 877--879
\OT1/ptm/m/n/10.95 tem wide con-fig-u-ra-tion file
Underfull \hbox (badness 10000) in paragraph at lines 882--883
[]|\OT1/pcr/m/n/9 truecrypt4\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 885--886
[]|\OT1/pcr/m/n/9 ripemd160\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 sha1
\OT1/ptm/m/n
/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 887--887
[]|\OT1/ptm/m/n/10.95 algorithm for hash-ing the
Underfull \hbox (badness 10000) in paragraph at lines 888--890
[]|\OT1/pcr/m/n/9 aes\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 blowfish
\OT1/ptm/m/n/1
0.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 888--890
\OT1/pcr/m/n/9 serpent/twofish\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 888--890
\OT1/pcr/m/n/9 twofish/aes\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 891--893
[]|\OT1/ptm/m/n/10.95 algorithm for en-cryp-tion and
Underfull \hbox (badness 5787) in paragraph at lines 891--893
\OT1/ptm/m/n/10.95 de-cryp-tion in the new for-mat,
[18] [19]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 983--983
[]|\OT1/ptm/b/n/10.95 Position|
[20]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1043--1043
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1073--1073
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (1.49583pt too wide) in paragraph at lines 1098--1098
[]|\OT1/ptm/m/it/10.95 variable|
[21]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1105--1105
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (1.49583pt too wide) in paragraph at lines 1135--1135
[]|\OT1/ptm/m/it/10.95 variable|
[22]
Overfull \hbox (2.5033pt too wide) in paragraph at lines 1147--1147
[]|\OT1/ptm/b/n/10.95 Position|
Overfull \hbox (1.49583pt too wide) in paragraph at lines 1179--1179
[]|\OT1/ptm/m/it/10.95 variable|
[23] [24]
Overfull \hbox (16.3827pt too wide) in paragraph at lines 1261--1274
\OT1/ptm/m/n/10.95 is in-stalled in the di-rec-tory
\OT1/pcr/m/n/10.95 /sbin\OT
1/ptm/m/n/10.95 . A sam-ple con-fig-u-ra-tion file has been put to
\OT1/pcr/m/n
/10.95 /etc/scramdisk/scramdiskrc\OT1/ptm/m/n/10.95 .
[25] [26] [27] (./scramdisk.aux) )
(see the transcript file for additional
information){/usr/share/texmf-texlive/f
onts/enc/dvips/base/8r.enc}</usr/share/texmf-texlive/fonts/type1/public/amsfont
s/cm/cmmi10.pfb></usr/share/texmf-texlive/fonts/type1/public/amsfonts/cm/cmmi9.
pfb></usr/share/texmf-texlive/fonts/type1/public/amsfonts/cm/cmr10.pfb></usr/sh
are/texmf-texlive/fonts/type1/public/amsfonts/cm/cmr8.pfb></usr/share/texmf-tex
live/fonts/type1/urw/courier/ucrr8a.pfb></usr/share/texmf-texlive/fonts/type1/u
rw/times/utmb8a.pfb></usr/share/texmf-texlive/fonts/type1/urw/times/utmbi8a.pfb
></usr/share/texmf-texlive/fonts/type1/urw/times/utmr8a.pfb></usr/share/texmf-t
exlive/fonts/type1/urw/times/utmri8a.pfb>
Output written on scramdisk.pdf (27 pages, 463608 bytes).
Transcript written on scramdisk.log.
ps2pdf gui_de.eps gui_de.pdf
ln -s gui_de.pdf `echo gui_de.eps | sed 's/.eps/-eps-converted-to.pdf/'`
ps2pdf create_de.eps create_de.pdf
ln -s create_de.pdf `echo create_de.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf tccreate_de.eps tccreate_de.pdf
ln -s tccreate_de.pdf `echo tccreate_de.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf reformat_de.eps reformat_de.pdf
ln -s reformat_de.pdf `echo reformat_de.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf ppdialog_de.eps ppdialog_de.pdf
ln -s ppdialog_de.pdf `echo ppdialog_de.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf tcppdialog_de.eps tcppdialog_de.pdf
ln -s tcppdialog_de.pdf `echo tcppdialog_de.eps | sed
's/.eps/-eps-converted-to.pdf/'`
ps2pdf config_de.eps config_de.pdf
ln -s config_de.pdf `echo config_de.eps | sed
's/.eps/-eps-converted-to.pdf/'`
pdflatex scramdisk_de.tex && pdflatex scramdisk_de.tex
This is pdfTeX, Version 3.1415926-1.40.10 (TeX Live 2009/Debian)
restricted \write18 enabled.
entering extended mode
(./scramdisk_de.tex
LaTeX2e <2009/09/24>
Babel <v3.8l> and hyphenation patterns for english, usenglishmax,
dumylang, noh
yphenation, ngerman, german, german-x-2009-06-19, ngerman-x-2009-06-19,
loaded.
(/usr/share/texmf-texlive/tex/latex/base/article.cls
Document Class: article 2007/10/19 v1.4h Standard LaTeX document class
(/usr/share/texmf-texlive/tex/latex/base/size11.clo))
(/usr/share/texmf-texlive/tex/latex/psnfss/times.sty)
(/usr/share/texmf-texlive/tex/latex/graphics/epsfig.sty
(/usr/share/texmf-texlive/tex/latex/graphics/graphicx.sty
(/usr/share/texmf-texlive/tex/latex/graphics/keyval.sty)
(/usr/share/texmf-texlive/tex/latex/graphics/graphics.sty
(/usr/share/texmf-texlive/tex/latex/graphics/trig.sty)
(/etc/texmf/tex/latex/config/graphics.cfg)
(/usr/share/texmf-texlive/tex/latex/pdftex-def/pdftex.def))))
(/usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf.sty
(/usr/share/texmf-texlive/tex/latex/oberdiek/epstopdf-base.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/infwarerr.sty)
(/usr/share/texmf-texlive/tex/latex/oberdiek/grfext.sty)
(/usr/share/texmf-texlive/tex/latex/oberdiek/kvoptions.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/kvsetkeys.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/etexcmds.sty)))
(/usr/share/texmf-texlive/tex/generic/oberdiek/pdftexcmds.sty
(/usr/share/texmf-texlive/tex/generic/oberdiek/ifluatex.sty)
(/usr/share/texmf-texlive/tex/generic/oberdiek/ltxcmds.sty))
(/usr/share/texmf-texlive/tex/latex/latexconfig/epstopdf-sys.cfg)))
(/usr/share/texmf-texlive/tex/latex/tools/longtable.sty)
(/usr/share/texmf-texlive/tex/generic/babel/babel.sty
(/usr/share/texmf-texlive/tex/generic/babel/germanb.ldf
(/usr/share/texmf-texlive/tex/generic/babel/babel.def)))
(/usr/share/texmf-texlive/tex/latex/base/inputenc.sty
(/usr/share/texmf-texlive/tex/latex/base/latin1.def))
No file scramdisk_de.aux.
(/usr/share/texmf-texlive/tex/latex/psnfss/ot1ptm.fd)
(/usr/share/texmf-texlive/tex/context/base/supp-pdf.mkii
[Loading MPS to PDF converter (version 2006.09.02).]
) [1{/var/lib/texmf/fonts/map/pdftex/updmap/pdftex.map}]
No file scramdisk_de.toc.
[2]
Overfull \hbox (27.3689pt too wide) in paragraph at lines 130--148
\OT1/ptm/m/n/10.95 schl[]usselt wer-den. Das Pro-jekt wird von
Sour-ce-For-ge.n
et be-her-bergt. Sei-ne Ho-me-pa-ge ist []\OT1/ptm/m/it/10.95
http://sd4l.sourc
eforge.net/[]\OT1/ptm/m/n/10.95 .
[3] (/usr/share/texmf-texlive/tex/latex/psnfss/ot1pcr.fd) [4]
<gui_de-eps-converted-to.pdf, id=21, 614.295pt x 794.97pt>
<use gui_de-eps-converted-to.pdf> [5 <./gui_de-eps-converted-to.pdf>]
[6]
<create_de-eps-converted-to.pdf, id=33, 614.295pt x 794.97pt>
<use create_de-eps-converted-to.pdf>
<tccreate_de-eps-converted-to.pdf, id=35, 614.295pt x 794.97pt>
<use tccreate_de-eps-converted-to.pdf>
Underfull \vbox (badness 10000) has occurred while \output is active [7
<./crea
te_de-eps-converted-to.pdf>]
Overfull \hbox (17.03262pt too wide) in paragraph at lines 392--403
[]\OT1/ptm/m/n/10.95 Das K[]astchen []\OT1/ptm/m/it/10.95 Ver-steck-ter
True-Cr
ypt Con-tai-ner[] \OT1/ptm/m/n/10.95 kann nur an-ge-hakt wer-den, wenn
zu-vor e
in exi-stie-ren-der TrueCrypt-
Overfull \hbox (9.41103pt too wide) in paragraph at lines 392--403
\OT1/ptm/m/n/10.95 tung von ver-steck-ten TrueCrypt-Containern sie-he
die ausf[
]uhrliche Do-ku-men-ta-ti-on auf []\OT1/ptm/m/it/10.95
http://www.truecrypt.org
/[]\OT1/ptm/m/n/10.95 ).
<ppdialog_de-eps-converted-to.pdf, id=45, 614.295pt x 794.97pt>
<use ppdialog_de-eps-converted-to.pdf>
<tcppdialog_de-eps-converted-to.pdf, id=47, 614.295pt x 794.97pt>
<use tcppdialog_de-eps-converted-to.pdf> [8
<./tccreate_de-eps-converted-to.pdf
> <./ppdialog_de-eps-converted-to.pdf>] [9
<./tcppdialog_de-eps-converted-to.pd
f>] <reformat_de-eps-converted-to.pdf, id=67, 614.295pt x 794.97pt>
<use reformat_de-eps-converted-to.pdf> [10
<./reformat_de-eps-converted-to.pdf>
] <config_de-eps-converted-to.pdf, id=76, 614.295pt x 794.97pt>
<use config_de-eps-converted-to.pdf> [11
<./config_de-eps-converted-to.pdf>]
Underfull \hbox (badness 1184) in paragraph at lines 557--559
[]|\OT1/ptm/m/n/10.95 ein Container-Format, \OT1/pcr/m/n/9 scramdisk
\OT1/ptm/m
/n/10.95 oder \OT1/pcr/m/n/9 truecrypt \OT1/ptm/m/n/10.95 bzw.
\OT1/pcr/m/n/9 t
ruecrypt4\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 truecrypt5
\OT1/ptm/m/n/10.95 ,
Package longtable Warning: Column widths have changed
(longtable) in table 1 on input line 571.
[12] [13]
Overfull \hbox (60.21527pt too wide) in paragraph at lines 619--626
\OT1/ptm/m/n/10.95 ge-la-den und mit der vom Be-nut-zer ein-ge-ge-be-nen
Pas-sp
hra-se ent-schl[]usselt. Ei-nes der Block-Ger[]ate
\OT1/pcr/m/n/10.95 /dev/scra
mdisk/vol01
Overfull \hbox (12.04712pt too wide) in paragraph at lines 619--626
\OT1/ptm/m/n/10.95 bis \OT1/pcr/m/n/10.95 /dev/scramdisk/vol15
\OT1/ptm/m/n/10.
95 wird dem Con-tai-ner zu-ge-wie-sen. Wenn kein frei-es Block-Ger[]at
mehr zur
Verf[]ugung
LaTeX Warning: Reference `t-mount-param' on page 14 undefined on input
line 665
.
Underfull \hbox (badness 10000) in paragraph at lines 675--675
[]|\OT1/ptm/b/n/10.95 Kurz-
Underfull \hbox (badness 10000) in paragraph at lines 678--678
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 678--678
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 679--680
[]|\OT1/ptm/m/n/10.95 Konfigurationsdatei, die statt
Underfull \hbox (badness 10000) in paragraph at lines 679--680
\OT1/pcr/m/n/9 /etc/scramdisk/scramdiskrc
Underfull \hbox (badness 10000) in paragraph at lines 688--688
[]|\OT1/pcr/m/n/9 -mount-
Underfull \hbox (badness 10000) in paragraph at lines 690--690
[]|\OT1/pcr/m/n/9 -default-
Overfull \hbox (2.79996pt too wide) in paragraph at lines 690--690
[]|\OT1/pcr/m/n/9 -defmnt|
Underfull \hbox (badness 10000) in paragraph at lines 691--694
[]$ \OT1/pcr/m/n/9 /media/scramdisk15 \OT1/ptm/m/n/10.95 aus-
Underfull \hbox (badness 8132) in paragraph at lines 696--698
[]|\OT1/ptm/m/n/10.95 der Con-tai-ner soll nur le-send
Underfull \hbox (badness 2326) in paragraph at lines 696--698
\OT1/ptm/m/n/10.95 ge[]offnet wer-den, wenn ei-ne re-
Underfull \hbox (badness 1448) in paragraph at lines 696--698
\OT1/ptm/m/n/10.95 nut-zer nicht schreib-bar ist, wird
Underfull \hbox (badness 3058) in paragraph at lines 707--708
[]|\OT1/ptm/m/n/10.95 das Datei-sy-stem soll nicht ein-
Underfull \hbox (badness 10000) in paragraph at lines 709--711
[]|\OT1/pcr/m/n/9 auto\OT1/ptm/m/n/10.95 , \OT1/pcr/m/n/9 ext2
\OT1/ptm/m/n/10.9
5 , \OT1/pcr/m/n/9 ext3\OT1/ptm/m/n/10.95 ,
Underfull \hbox (badness 10000) in paragraph at lines 715--715
[]|\OT1/ptm/m/n/10.95 keine
Underfull \hbox (badness 10000) in paragraph at lines 715--715
\OT1/ptm/m/n/10.95 Ab-lauf-
Package longtable Warning: Column widths have changed
(longtable) in table 2 on input line 727.
[14] [15]
LaTeX Warning: Reference `t-umount-param' on page 16 undefined on input
line 73
5.
Underfull \hbox (badness 10000) in paragraph at lines 742--742
[]|\OT1/ptm/b/n/10.95 Kurz-
Underfull \hbox (badness 10000) in paragraph at lines 745--745
[]|\OT1/pcr/m/n/9 $HOME/
Underfull \hbox (badness 10000) in paragraph at lines 745--745
\OT1/pcr/m/n/9 .scramdisk/
Underfull \hbox (badness 10000) in paragraph at lines 746--747
[]|\OT1/ptm/m/n/10.95 Konfigurationsdatei, die statt
Underfull \hbox (badness 10000) in paragraph at lines 746--747
\OT1/pcr/m/n/9 /etc/scramdisk/scramdiskrc
Underfull \hbox (badness 10000) in paragraph at lines 750--750
[]|\OT1/pcr/m/n/9 -mount-
Underfull \hbox (badness 2547) in paragraph at lines 752--754
[]|\OT1/ptm/m/n/10.95 das Datei-sy-stem soll nicht aus-
Underfull \hbox (badness 3189) in paragraph at lines 758--758
[]|\OT1/ptm/m/n/10.95 alle vom Be-nut-zer ge-moun-te-ten
Underfull \hbox (badness 10000) in paragraph at lines 762--762
[]|\OT1/pcr/m/n/9 -fusr-
Package longtable Warning: Column widths have changed
(longtable) in table 3 on input line 769.
Underfull \vbox (badness 10000) has occurred while \output is active
[16]
Overfull \hbox (38.36995pt too wide) in paragraph at lines 781--794
\OT1/ptm/m/n/10.95 Disk f[]ur Li-nux nor-ma-ler-wei-se nicht die-sem
Ver-fah-re
n. Es gibt je-doch einen Kon-fi-gu-ra-ti-ons-pa-ra-me-ter
\OT1/pcr/m/n/10.95 -w
in-compatible
LaTeX Warning: Reference `t-create-param' on page 17 undefined on input
line 79
8.
Underfull \hbox (badness 10000) in paragraph at lines 810--810
[]|\OT1/ptm/b/n/10.95 Kurz-
Underfull \hbox (badness 10000) in paragraph at lines 813--813
[]|\OT1/...
[truncated message content] |
|
From: Stewart M. <smm...@gm...> - 2011-03-26 16:24:55
|
On Sat, 2011-03-26 at 10:59 -0400, Stewart Millen wrote: > On Sat, 2011-03-26 at 10:26 -0400, Stewart Millen wrote: > > > On Wed, 2011-03-02 at 06:51 -0500, Jonathan Coles wrote: > > > > > Using version 2.1-0 built on kernel 2.6.35-28-generic (AMD > > > 64-bit), I find container creation is very slow. It took 45 > > > minutes to create a 10G TrueCrypt 7 partition on an external > > > USB drive. > > > > > > Is this normal? > > > > > > The disk drive light shows a second or so of activity every > > > 30 seconds. When the operating system formats a partition, > > > the disk is continuously active for the few minutes required > > > to complete the task. > > > > > > Thanks. > > > > I successfully created a 40 GB Scramdisk container on an external hard drive yesterday (kernel 2.6.32-30, Ubuntu 10.04, ext3 file system inside the container, external hard drive NTFS format). I can verify that the procedure took (in my case) hours. > > > > Also, on an external hard drive (FAT32) so far I've not been able to create any sizeable Truecrypt container. (Caveat: I did successfully create a small one, 15 MB, by mistake). SD4L quits when encrypting about 25 % through or so and tells me "unable to create backup file". Again I'm using ext3 as the file format inside the container. > > > > Thinking that this could be a permissions problem, I'm trying to see if I can create the same container on my computer's internal HD and seeing how that goes. I'll post the results. > > > > Stewart > > It worked on my local hard drive. So it's probably a permissions > problem. My time for a 15 GB container is similar to yours. > > Stewart Embarrassingly--I take the first part about being unable to create a container on an external HD back. I forgot this particular external drive was FAT32, so it bombed out after 4GB, the file size limit of FAT32. I reformatted the drive as NTFS and it creates fine (albeit slow). However, I don't generally create container files or partitions regularly so I have no idea how "slow" is slow--a large container takes has always taken a lot of time. Stewart |
|
From: Jonathan C. <jco...@ro...> - 2011-03-26 19:56:22
|
Hi Stewart. I just finished creating a 130GB TrueCrypt volume on an external USB drive. It took 9 hours. I call that slow because simply creating and formatting a partition with the operating system takes minutes, not hours. Is it the encryption that takes so much time? Even though the data is all null, the result of the encryption isn't. Observing the drive light, it's clear that the drive is only active occasionally - a few seconds in each minute. . The rest of the time could be computation. Creating a new volume isn't something you would do often. And I can live with it being slow as long as it works. On 11-03-26 12:24 PM, Stewart Millen wrote: > On Sat, 2011-03-26 at 10:59 -0400, Stewart Millen wrote: >> On Sat, 2011-03-26 at 10:26 -0400, Stewart Millen wrote: >> >>> On Wed, 2011-03-02 at 06:51 -0500, Jonathan Coles wrote: >>> >>>> Using version 2.1-0 built on kernel 2.6.35-28-generic (AMD >>>> 64-bit), I find container creation is very slow. It took 45 >>>> minutes to create a 10G TrueCrypt 7 partition on an external >>>> USB drive. >>>> >>>> Is this normal? >>>> >>>> The disk drive light shows a second or so of activity every >>>> 30 seconds. When the operating system formats a partition, >>>> the disk is continuously active for the few minutes required >>>> to complete the task. >>>> >>>> Thanks. >>> I successfully created a 40 GB Scramdisk container on an external hard drive yesterday (kernel 2.6.32-30, Ubuntu 10.04, ext3 file system inside the container, external hard drive NTFS format). I can verify that the procedure took (in my case) hours. >>> >>> Also, on an external hard drive (FAT32) so far I've not been able to create any sizeable Truecrypt container. (Caveat: I did successfully create a small one, 15 MB, by mistake). SD4L quits when encrypting about 25 % through or so and tells me "unable to create backup file". Again I'm using ext3 as the file format inside the container. >>> >>> Thinking that this could be a permissions problem, I'm trying to see if I can create the same container on my computer's internal HD and seeing how that goes. I'll post the results. >>> >>> Stewart >> It worked on my local hard drive. So it's probably a permissions >> problem. My time for a 15 GB container is similar to yours. >> >> Stewart > Embarrassingly--I take the first part about being unable to create a > container on an external HD back. I forgot this particular external > drive was FAT32, so it bombed out after 4GB, the file size limit of > FAT32. I reformatted the drive as NTFS and it creates fine (albeit > slow). However, I don't generally create container files or partitions > regularly so I have no idea how "slow" is slow--a large container takes > has always taken a lot of time. > > Stewart > > > > ------------------------------------------------------------------------------ > Enable your software for Intel(R) Active Management Technology to meet the > growing manageability and security demands of your customers. Businesses > are taking advantage of Intel(R) vPro (TM) technology - will your software > be a part of the solution? Download the Intel(R) Manageability Checker > today! http://p.sf.net/sfu/intel-dev2devmar > _______________________________________________ > SD4L-user mailing list > SD4...@li... > https://lists.sourceforge.net/lists/listinfo/sd4l-user > |
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X