Schily Tools Activity
A Tool Box with tools written or managed by Jörg Schilling
Brought to you by:
schily
Activity for Schily Tools
-
Mark K. posted a comment on ticket #31
Oh, I just found the bad news about the author, never mind. RIP
-
Same problem again. 12 times it worked now since the last problem in May with the same kinds of blank disks. And on the 13th try today I am getting cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error CDB: 1B 00 00 00 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 13 06 03 B4 B5 80 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0xB5 Qual 0x80 (vendor unique sense code 0xB5) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished...
-
Same problem again. 12 times it worked now since the last problem in May. And on the 13th try today I am getting cdrecord: Input/output error. start/stop unit: scsi sendcmd: no error CDB: 1B 00 00 00 01 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 04 00 00 00 00 0A 13 06 03 B4 B5 80 00 00 Sense Key: 0x4 Hardware Error, Segment 0 Sense Code: 0xB5 Qual 0x80 (vendor unique sense code 0xB5) [No matching qualifier] Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 8.194s timeout 200s cdrecord:...
-
Same problem again. 12 times it worked now since the last problem in May. And on the 13th try today I am getting status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 0A 37 2D 03 B4 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 01 01 00 00 01 00 00 00 00 Then after restarting...
-
Same problem again. 12 times it worked now since the last problem in May. And on the 13th try today I am getting status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 0A 37 2D 03 B4 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 01 01 00 00 01 00 00 00 00 again. Then after...
-
Same problem again. 12 times it worked now ince the last problem in May. And on the 13th try today I am getting status: 0x2 (CHECK CONDITION) Sense Bytes: 71 00 03 00 00 00 00 0A 37 2D 03 B4 0C 00 00 00 Sense Key: 0x3 Medium Error, deferred error, Segment 0 Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0 Sense flags: Blk 0 (not valid) cmd finished after 0.003s timeout 200s cdrecord: Input/output error. close track/session: scsi sendcmd: no error CDB: 5B 01 01 00 00 01 00 00 00 00 again. Then after...
-
Correction, this was a BD-R, not a DVD.
-
Hardware/Media/IO/sendcmd error
-
An mac posted a comment on discussion General Discussion
How do I preserve folder date and timestamps within android to PC -- either in windows 10/11 pro or ubuntu 22.04 ? I want the date created, date modified and date accessed to be exactly the same on windows as it is within android's date changed, date modified and date accessed. How can I do that specifically for folders?
-
dragomerlin created ticket #30
typo in compiled schily-2021-09-18.tar.bz2
-
Schily Tools released /schily-2021-09-18.tar.bz2
-
-
-
Jörg Schilling posted a comment on ticket #29
Make sure that you either give the full pathname to "truss" or have "p" in your PATH environment.
-
Also truss p -version is not a valid command: truss p -version truss: execvp p: No such file or directory truss: Unable to enable LWP events for pid 977: No such proces
-
Also line 564 "Joerg Schilling" could be "Jörg Schilling", in case you care about the details.
-
Also line 564 "Joerg Schilling" should be "Jörg Schilling", in case you care about the details.
-
Truss is the name of the original program written by Roger Faulkner at AT&T around 1984. In 1987, SunOS-4.0 came out with a clone called trace. Around 1989, a person from the Sun User group wrote a trace clone called strace for SunOS-4 in order to find out how it works. It should be easy to find this information if you do not have the original program from Roger Faulkner. Truss is however available on most operating systems, so it seems to be the best to use that original command name.
-
Also line 564 "Joerg Schilling" should be "Jöerg Schilling", in case you care about the details.
-
Instructions for GNU/Linux are missing, plus truss is not available there so I can't run truss p -version.
-
Also line 564 "Joerg Schilling" should be "Jöerg Schilling", in case you are about the details.
-
Improve AN-* instructions
-
author surname not displayed properly on linux terminal
-
Since revision schilytools 2021-09-01, all schilytools have been changed. If you install a translation file as mentioned in AN-2021-09-01, the problem is gone. This is currently already available in the FreeBSD binaries from the schilytoos.
-
-
-
-
-
-
Thanks, I'll keep an eye on updates.
-
Thanks, I'll keep an eye on updates.
-
Well, what you did is not a fix, since it only hides the problem for you instead of making the problem disappear for everyone. My solution works for everyone....
-
Well, what you did is not a fix, since it only hides the problem for you instead of making the problem disappear for everyone. My solution works for everyone....
-
I already converted shily tools to UTF-8. I've fixed for me and for everyone else.
-
I already converted shily tools to UTF-8. I've fixed for me and for everyone else.
-
Hi, this is a rendering problem in your work environment. It seems that you are using an UTF-8 based locale and even though the low 256 characters from ISO-8859-1 and UNICODE are identical. you see rubbish. The next version of the schilytools come with a workaround. If you install a translation file, gettext() will call iconv() to convert the ’ö’ to what it is in your local setup. The announcement file for the next schilytools release will explain how to set up a translation file.
-
Hi, this is a rendering problem in your work environment. It seems that you are using an UTF-8 based locale and even though the low 256 characters from ISO-8859-1 and UNICODE are identical. you see rubbish. The next version of the schilytools come with a workaround. If you install a translation file, gettext() will call iconv() to convert the ’ö’ to what it is in your local setup. The announcement file for the next schilytools release will explain how to set up a translation file.
-
author surname not displayed properly on linux terminal
-
author surname not displayed properly on linux terminal
-
-
-
-
-
-
-
-
Star does not save empty linux extended attributes
-
fixed in schilytools-2021-07-29
-
Star does not save empty linux extended attributes
-
fixed in schilytools-2021-07-29
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Star does not save empty linux extended attributes
-
Star does not save empty linux extended attributes
-
Sorry wrong file, here is the correct file.
-
Sorry wrong file, here is the correct file.
-
This seems to be a corner case, since on Ubuntu 16.04, $ setfattr -n user.archived -v "" testfile is without effect, but does not give an error message. So I manually created a tar archive with a zeroed linux xattr. Please apply the attached patch to xheader.c and retry.
-
This seems to be a corner case, since on Ubuntu 16.04, $ setfattr -n user.archived -v "" testfile is without effect, but does not give an error message. So I manually created a tar archive with a zeroed linux xattr. Please apply the attached patch to xheader.c and retry.
-
-
-
-
-
Dennis Katsonis created ticket #27
Star does not save empty linux extended attributes
-
Star does not save empty linux extended attributes
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
implicitly declaring library function 'exit'
1 >