From: Shamshad A. <sha...@gm...> - 2014-08-07 20:22:17
|
Hi, Ok, it's possible to replace only interfaces and I'll do that. Thanks, Shamshad On Thu, Aug 7, 2014 at 4:00 PM, Till Schäfer <til...@tu...> wrote: > Hi, > if you just replace the old interface and the new interface is compatible > with the GUI access, you should not worry about the other steps. Someone > else will fix the GUI later. > > Regards, > Till > > Am Donnerstag, 7. August 2014, 15:54:50 schrieben Sie: > > Hi, > > > > Ok, how can we avoid the duplicate code? Is it good idea to modify GUI > > after all branches are merged at the end of GSoC? > > > > Thanks, > > Shamshad > > > > > > On Thu, Aug 7, 2014 at 3:23 PM, Till Schäfer < > til...@tu...> > > wrote: > > > > > Hi, > > > thats fine, so we still need to adjust the GUI, but we do not have > > > duplicate code. > > > > > > Regards, > > > Till > > > > > > Am Donnerstag, 7. August 2014, 12:21:48 schrieb Shamshad Alam: > > > > Hi Till, > > > > > > > > I saw the GUI of data export and observed that if we make change in > model > > > > interface it won't affect the GUI. we have to modify GUI in order to > run > > > > export task in background with progress dialog. All other codes are > > > usable. > > > > > > > > Thanks, > > > > Shamshad > > > > > > > > > > > > > > > > On Wed, Aug 6, 2014 at 7:17 PM, Till Schäfer < > > > til...@tu...> > > > > wrote: > > > > > > > > > To make it short: your interface sounds reasonable. Do you plan to > > > replace > > > > > to reorganize the GUI export as well to fit you interface? (i am > always > > > > > afraid of redundant code) > > > > > > > > > > Regards, > > > > > Till > > > > > > > > > > Am Dienstag, 5. August 2014, 12:45:13 schrieb Shamshad Alam: > > > > > > Hi everyone, > > > > > > > > > > > > While I was implementing command to export dataset / subset in > the > > > sdf / > > > > > > csv file I saw > > > > > > scaffold hunter has classes which implements data export, > however, > > > they > > > > > are > > > > > > less efficient because they do not support ProgressListener which > > > results > > > > > > in unresponsive GUI when we export large dataset. Moreover the > export > > > > > > interfaces are implemented in model package and they are using > > > > > JOptionPane > > > > > > which is a GUI. The ExportInterface should have method like > > > getName() and > > > > > > getDescription(), which make any exporter self explanatory. [see > the > > > > > > interface in the package edu.udo.scaffoldhunter.model.dataexport > and > > > its > > > > > > implementation in sub packages]. > > > > > > > > > > > > The proposed interface and its abstract implementation is > attached > > > with > > > > > the > > > > > > mail. > > > > > > > > > > > > If there is more efficient solution is possible in different way > let > > > me > > > > > > know. I'll try to implement that if possible within the time > frame. > > > > > > > > > > > > Thanks, > > > > > > Shamshad > > > > > > > > > > > -- > > > > > Dipl.-Inf. Till Schäfer > > > > > TU Dortmund University > > > > > Chair 11 - Algorithm Engineering > > > > > Otto-Hahn-Str. 14 / Room 237 > > > > > 44227 Dortmund, Germany > > > > > > > > > > e-mail: til...@cs... > > > > > phone: +49(231)755-7706 > > > > > fax: +49(231)755-7740 > > > > > web: http://ls11-www.cs.uni-dortmund.de/staff/schaefer > > > > > pgp: > > > > > > > > > https://keyserver2.pgp.com/vkd/SubmitSearch.event?&&SearchCriteria=0xD84DED79 > > > > > > > > > > > > > > > > > > > ------------------------------------------------------------------------------ > > > > > Infragistics Professional > > > > > Build stunning WinForms apps today! > > > > > Reboot your WinForms applications with our WinForms controls. > > > > > Build a bridge from your legacy apps to the future. > > > > > > > > > > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > > > > > _______________________________________________ > > > > > Scaffoldhunter-devel mailing list > > > > > Sca...@li... > > > > > https://lists.sourceforge.net/lists/listinfo/scaffoldhunter-devel > > > > > > > > > > > > > > > > > > > > > > > > -- > > > Dipl.-Inf. Till Schäfer > > > TU Dortmund University > > > Chair 11 - Algorithm Engineering > > > Otto-Hahn-Str. 14 / Room 237 > > > 44227 Dortmund, Germany > > > > > > e-mail: til...@cs... > > > phone: +49(231)755-7706 > > > fax: +49(231)755-7740 > > > web: http://ls11-www.cs.uni-dortmund.de/staff/schaefer > > > pgp: > > > > https://keyserver2.pgp.com/vkd/SubmitSearch.event?&&SearchCriteria=0xD84DED79 > > > > > > > > > > ------------------------------------------------------------------------------ > > > Infragistics Professional > > > Build stunning WinForms apps today! > > > Reboot your WinForms applications with our WinForms controls. > > > Build a bridge from your legacy apps to the future. > > > > > > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > > > _______________________________________________ > > > Scaffoldhunter-devel mailing list > > > Sca...@li... > > > https://lists.sourceforge.net/lists/listinfo/scaffoldhunter-devel > > > > > > > > > > > > -- > Dipl.-Inf. Till Schäfer > TU Dortmund University > Chair 11 - Algorithm Engineering > Otto-Hahn-Str. 14 / Room 237 > 44227 Dortmund, Germany > > e-mail: til...@cs... > phone: +49(231)755-7706 > fax: +49(231)755-7740 > web: http://ls11-www.cs.uni-dortmund.de/staff/schaefer > pgp: > https://keyserver2.pgp.com/vkd/SubmitSearch.event?&&SearchCriteria=0xD84DED79 > > > ------------------------------------------------------------------------------ > Infragistics Professional > Build stunning WinForms apps today! > Reboot your WinForms applications with our WinForms controls. > Build a bridge from your legacy apps to the future. > > http://pubads.g.doubleclick.net/gampad/clk?id=153845071&iu=/4140/ostg.clktrk > _______________________________________________ > Scaffoldhunter-devel mailing list > Sca...@li... > https://lists.sourceforge.net/lists/listinfo/scaffoldhunter-devel > -- Shamshad Alam +91 9911631198 | India G+: +ShamshadAlamNpti FB: shamshad.saralindia IN: http://lnkd.in/b_EzeeN |