Hello Maxim!
I have installed all the necessary components but "DSD : ASIO : DSD Transcoder (DoP/Native)" is missing as the output device in foobar2000, please check attached screenshots.
Cannot understand why... could you please help?
Thank you for advice but situation got worse after installing SetupASIO64_109.msi
DSD does not play anymore even with default driver.
I've attached the trace output file, maybe Maxim could help to figure out what is going on.
Both trace files look good (as if ASIO driver gets DSD data). Does the track time in foobar's status bar run in the right way? And what about sound itself?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Yes it does, track time in the FB status bar runs as it supposed to.
But no sound if "ASIO : DSD Transcoder (DoP/Native)" selected as output device.
I am starting to suspect DAC firmware corruption.
However, I wasn't able to find any information in web about issues with firmware in
Buffalo-IIISE PRO DAC.
Last edit: ALq 2022-06-18
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello Maxim!
I have installed all the necessary components but "DSD : ASIO : DSD Transcoder (DoP/Native)" is missing as the output device in foobar2000, please check attached screenshots.
Cannot understand why... could you please help?
Regards,
alq
You need to install foo_out_asio. Then select "ASIO : DSD Transcoder (DoP/Native)"
I can only get sound with the settings as shown on the pictures.
None of other ones work. Very strange...
Have you configured DSD Transcoder?
Yes, I have.
Could you please produce DSD Transcoder trace output at Level 3?
Hi Maxim, here it is.
Thank you!
Amanero need asio install file , that have already in the device drivers folder
Thank you for advice but situation got worse after installing SetupASIO64_109.msi
DSD does not play anymore even with default driver.
I've attached the trace output file, maybe Maxim could help to figure out what is going on.
Last edit: ALq 2022-06-17
maybe is device firmware need different asio drivers
Last edit: kimk2010 2022-06-17
Seems like it is not. If "Amanero ASIO Combo384" selected as asio device in transcoder then error occurs, see it in attached pictures.
Last edit: ALq 2022-06-18
https://www.amanero.com/combo384_firmware.htm
I know, thank you. I did re-flash amanero CPLD and firmware many times.
Problem is related to DAC firmware I suspect.
Last edit: ALq 2022-06-18
Both trace files look good (as if ASIO driver gets DSD data). Does the track time in foobar's status bar run in the right way? And what about sound itself?
Yes it does, track time in the FB status bar runs as it supposed to.
But no sound if "ASIO : DSD Transcoder (DoP/Native)" selected as output device.
I am starting to suspect DAC firmware corruption.
However, I wasn't able to find any information in web about issues with firmware in
Buffalo-IIISE PRO DAC.
Last edit: ALq 2022-06-18