Menu
▾
▴
[Rocketworkbench] Cpropepshell interfase 1.01
|
From:
<ghe...@ci...> - 2001-09-07 20:02:57
|
Dear Olaf, In the meantime I checked the cpropepshell 1.01 interfase and it works pretty well for the selected exit conditions. I had only a small = trouble with the output data, which did not appear fully displayed, but this = can be solved by saving the results on the Note Block or by printing. By = the way, would it not be more meaningful to have as additional input = option, for exit conditions, the subsonic area ratio, as cpropep-web allows, = instead of two supersonic area ratios giving both the same results? Again thank you for your contribution which I appreciate very much and = which will be, no doubt, very useful for practical use and educational = training. Best regards and hoping to hear from you and our colleagues from the Rocketworkbench, Gunterio Heineken Buenos Aires, Argentina. =20 Send Rocketworkbench-devel mailing list submissions to roc...@li... To subscribe or unsubscribe via the World Wide Web, visit http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel or, via email, send a message with subject or body 'help' to roc...@li... You can reach the person managing the list at roc...@li... When replying, please edit your Subject line so it is more specific than "Re: Contents of Rocketworkbench-devel digest..." Today's Topics: 1. Re: GUI for cpropep (Hans Olaf Toft) 2. RV: Rocketworkbench-devel digest, Vol 1 #46 - 2 msgs, Rocketworkb ench-devel digest, Vol 1 #47 - 1 msg (=3D?iso-8859-1?Q?=3D22Heineken=3D2C_Gunterio_Germ=3DE1n=3D22?=3D) --__--__-- Message: 1 Date: Sat, 25 Aug 2001 12:01:33 +0200 From: Hans Olaf Toft <ho...@vi...> To: Rocket Workbench <roc...@li...> Subject: [Rocketworkbench] Re: GUI for cpropep --------------C80044D8C2DF7A24889046D6 Content-Type: text/plain; charset=3Diso-8859-1 Content-Transfer-Encoding: 8bit "Heineken, Gunterio Germ=E1n" wrote: > I found that cpropepShell interface works well for adiabatic flame > temperature and fixed pressure and temperature calculations , but I = had > trouble with exit pressure and area ratio imput data for frozen and shifting > equilibrium conditions. The validity check error on the exit conditions is now fixed. An = additional error of loosing the fixed pressure and temperature problem has also = been removed. The updated cpropepshell 1.01 is awailable from http://users.cybercity.dk/~dko7904/cpropepshell/cpropepshell.htm Also the full (Delphi 4) source is now awailable from the same = location. The original download has been removed. Hans Olaf Toft --------------C80044D8C2DF7A24889046D6 Content-Type: text/html; charset=3Dus-ascii Content-Transfer-Encoding: 7bit <!doctype html public "-//w3c//dtd html 4.0 transitional//en"> <html> <br>"Heineken, Gunterio Germán" wrote: <blockquote TYPE=3DCITE>I found that cpropepShell interface works well = for adiabatic flame <br>temperature and fixed pressure and temperature calculations , but I had <br>trouble with exit pressure and area ratio imput data for frozen and shifting <br>equilibrium conditions.</blockquote> The validity check error on the exit conditions is now fixed. An = additional error of loosing the fixed pressure and temperature problem has also = been removed. <p>The updated cpropepshell 1.01 is awailable from <br><a href=3D"http://users.cybercity.dk/~dko7904/cpropepshell/cpropepshell.htm= ">http ://users.cybercity.dk/~dko7904/cpropepshell/cpropepshell.htm</a><a href=3D"http://users.cybercity.dk/~dko7904/cpropepshell/cpropepshell.htm= "></a> <p>Also the full (Delphi 4) source is now awailable from the same = location. The original download has been removed. <p>Hans Olaf Toft <br><a href=3D"http://users.cybercity.dk/~dko7904/cpropepshell/cpropepshell.htm= "></a> </html> --------------C80044D8C2DF7A24889046D6-- --__--__-- Message: 2 From: =3D?iso-8859-1?Q?=3D22Heineken=3D2C_Gunterio_Germ=3DE1n=3D22?=3D <ghe...@ci...> To: 'ho...@vi...' Cc: ant...@so...,, ant...@po...,,=20 roc...@li... Date: Fri, 24 Aug 2001 17:21:54 -0300 Subject: [Rocketworkbench] RV: Rocketworkbench-devel digest, Vol 1 #46 = - 2 msgs, Rocketworkb ench-devel digest, Vol 1 #47 - 1 msg Dear Olaf, I was using your most welcomed cpropepShell interface. I found that it = has more calculation options than Gpep, which allows only for shifting equilibrium performance evaluation. Your interface has similar options = as Cpropep-web http://rocketworkbench.sourceforge.net/equil.phtml=20 but allows calculations for systems with more than three components, = which is a limitation of cpropep-web. I found that cpropepShell interface works well for adiabatic flame temperature and fixed pressure and temperature calculations , but I had trouble with exit pressure and area ratio imput data for frozen and = shifting equilibrium conditions. In general for this calcultions, as Gpep and cpropep-web require, for a given chamber pressure, either exit = pressure or supersonic area ratio are selected, but not both at the same time, = since they are functionally related. CpropepShell interface requires input of = both exit pressure and two? supersonic area ratios. The result is that we = obtain incorrect exit parameters for the selected input data, which do not correspond either to the selected exit pressure nor to the area ratio, = and the outprint never gives the input exit pressure back. Output values = for chamber and throat sections are o.k. and identical to those obtained = with Gpropep and cpropep-web interfaces. May be you can help to overcome = this trouble. Thank you very much for your effort. Best regards and wishes. Gunterio Heineken CITEFA Buenos Aires, Argentina -----Mensaje original----- De: roc...@li... [mailto:roc...@li...] Enviado el: Martes, 21 de Agosto de 2001 04:06 p.m. Para: roc...@li... Asunto: Rocketworkbench-devel digest, Vol 1 #46 - 2 msgs Send Rocketworkbench-devel mailing list submissions to roc...@li... To subscribe or unsubscribe via the World Wide Web, visit http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel or, via email, send a message with subject or body 'help' to roc...@li... You can reach the person managing the list at roc...@li... When replying, please edit your Subject line so it is more specific than "Re: Contents of Rocketworkbench-devel digest..." Today's Topics: 1. GUI for Cpropep (Hans Olaf Toft) 2. Re: GUI for Cpropep (Antoine Lefebvre) -- __--__--=20 Message: 1 Date: Mon, 20 Aug 2001 23:18:04 +0200 From: Hans Olaf Toft <ho...@vi...> To: roc...@li... Subject: [Rocketworkbench] GUI for Cpropep I have made a small application - nothing special really - that = provides a graphical userinterface for cpropep under Windows. For those interested, it may be found at http://users.cybercity.dk/~dko7904/DARK/download/cpropepshell.zip The application need to be located in the same directory as cpropep.exe = and cpropep.conf. Hans Olaf Toft -- __--__--=20 Message: 2 Date: Tue, 21 Aug 2001 00:21:21 -0400 From: Antoine Lefebvre <an...@sh...> To: Rocket Workbench <roc...@li...> Subject: Re: [Rocketworkbench] GUI for Cpropep Reply-To: ant...@so... Note that there is another GUI for windows at = http://www.msu.edu/user/asman called Gpep. I will put links for both application on the web page. Is the source code for your application available ? Thanks for your work. On Mon, Aug 20, 2001 at 11:18:04PM +0200, Hans Olaf Toft wrote: > I have made a small application - nothing special really - that = provides a graphical userinterface for cpropep under > Windows. >=20 > For those interested, it may be found at > http://users.cybercity.dk/~dko7904/DARK/download/cpropepshell.zip >=20 > The application need to be located in the same directory as = cpropep.exe and cpropep.conf. >=20 > Hans Olaf Toft >=20 >=20 > _______________________________________________ > http://rocketworkbench.sourceforge.net > Rocketworkbench-devel mailing list > Roc...@li... > http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel --=20 Antoine Lefebvre ant...@po... -- __--__--=20 _______________________________________________ Rocketworkbench-devel mailing list Roc...@li... http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel End of Rocketworkbench-devel Digest Send Rocketworkbench-devel mailing list submissions to roc...@li... To subscribe or unsubscribe via the World Wide Web, visit http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel or, via email, send a message with subject or body 'help' to roc...@li... You can reach the person managing the list at roc...@li... When replying, please edit your Subject line so it is more specific than "Re: Contents of Rocketworkbench-devel digest..." Today's Topics: 1. Re: GUI for Cpropep (Hans Olaf Toft) -- __--__--=20 Message: 1 Date: Tue, 21 Aug 2001 23:52:45 +0200 From: Hans Olaf Toft <ho...@vi...> To: roc...@li... Subject: [Rocketworkbench] Re: GUI for Cpropep > Note that there is another GUI for windows at http://www.msu.edu/user/asman > called Gpep. I will put links for both application on the web page. I wasn't really aware of that, so maybe I could have spared the efford. However it was quite fun to do and I learned a couple of things during the process, so maybe the only drawback is that there are now two different interfaces for Windows and none for other platforms. > Is the source code for your application available ? In principle yes, but it is very sparsely commented (uncommented actually...) so I would like to add a few comments if source code is to be made public. Source code is written in Delphi - it could maybe be ported to Linux with some limited efford. > Thanks for your work. - Cpropep itself is the real achivement, so thanks for Your work Antoine! Hans Olaf Toft -- __--__--=20 _______________________________________________ Rocketworkbench-devel mailing list Roc...@li... http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel End of Rocketworkbench-devel Digest --__--__-- _______________________________________________ Rocketworkbench-devel mailing list Roc...@li... http://lists.sourceforge.net/lists/listinfo/rocketworkbench-devel End of Rocketworkbench-devel Digest |
