Menu
▾
▴
[Rochat-svn] SF.net SVN: rochat: [41]
|
From: <le...@us...> - 2008-05-17 11:49:28
|
Revision: 41
http://rochat.svn.sourceforge.net/rochat/?rev=41&view=rev
Author: levia
Date: 2008-05-17 04:49:27 -0700 (Sat, 17 May 2008)
Log Message:
-----------
- Added jirclib directories.
- Moved everything from ROChat to it's own directory.
Added Paths:
-----------
ROChat/
ROChat/branches/
ROChat/tags/
ROChat/trunk/
ROChat/trunk/AUTHORS
ROChat/trunk/LICENSE
ROChat/trunk/build.xml
ROChat/trunk/nbproject/
ROChat/trunk/nbproject/build-impl.xml
ROChat/trunk/nbproject/genfiles.properties
ROChat/trunk/nbproject/project.properties
ROChat/trunk/nbproject/project.xml
ROChat/trunk/src/
ROChat/trunk/src/net/
ROChat/trunk/src/net/sensiva/
ROChat/trunk/src/net/sensiva/rochat/
jirclib/
jirclib/branches/
jirclib/tags/
jirclib/trunk/
Added: ROChat/trunk/AUTHORS
===================================================================
--- ROChat/trunk/AUTHORS (rev 0)
+++ ROChat/trunk/AUTHORS 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,5 @@
+AUTHORS
+-------
+
+Lars 'Levia' Wesselius la...@le... le...@op...
+Joshua 'Spike1506' Luckers spi...@gm...
\ No newline at end of file
Added: ROChat/trunk/LICENSE
===================================================================
--- ROChat/trunk/LICENSE (rev 0)
+++ ROChat/trunk/LICENSE 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,339 @@
+ GNU GENERAL PUBLIC LICENSE
+ Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+ Preamble
+
+ The licenses for most software are designed to take away your
+freedom to share and change it. By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users. This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it. (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.) You can apply it to
+your programs, too.
+
+ When we speak of free software, we are referring to freedom, not
+price. Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+ To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+ For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have. You must make sure that they, too, receive or can get the
+source code. And you must show them these terms so they know their
+rights.
+
+ We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+ Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software. If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+ Finally, any free program is threatened constantly by software
+patents. We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary. To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+ The precise terms and conditions for copying, distribution and
+modification follow.
+
+ GNU GENERAL PUBLIC LICENSE
+ TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+ 0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License. The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language. (Hereinafter, translation is included without limitation in
+the term "modification".) Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope. The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+ 1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+ 2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+ a) You must cause the modified files to carry prominent notices
+ stating that you changed the files and the date of any change.
+
+ b) You must cause any work that you distribute or publish, that in
+ whole or in part contains or is derived from the Program or any
+ part thereof, to be licensed as a whole at no charge to all third
+ parties under the terms of this License.
+
+ c) If the modified program normally reads commands interactively
+ when run, you must cause it, when started running for such
+ interactive use in the most ordinary way, to print or display an
+ announcement including an appropriate copyright notice and a
+ notice that there is no warranty (or else, saying that you provide
+ a warranty) and that users may redistribute the program under
+ these conditions, and telling the user how to view a copy of this
+ License. (Exception: if the Program itself is interactive but
+ does not normally print such an announcement, your work based on
+ the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole. If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works. But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+ 3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+ a) Accompany it with the complete corresponding machine-readable
+ source code, which must be distributed under the terms of Sections
+ 1 and 2 above on a medium customarily used for software interchange; or,
+
+ b) Accompany it with a written offer, valid for at least three
+ years, to give any third party, for a charge no more than your
+ cost of physically performing source distribution, a complete
+ machine-readable copy of the corresponding source code, to be
+ distributed under the terms of Sections 1 and 2 above on a medium
+ customarily used for software interchange; or,
+
+ c) Accompany it with the information you received as to the offer
+ to distribute corresponding source code. (This alternative is
+ allowed only for noncommercial distribution and only if you
+ received the program in object code or executable form with such
+ an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it. For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable. However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+ 4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License. Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+ 5. You are not required to accept this License, since you have not
+signed it. However, nothing else grants you permission to modify or
+distribute the Program or its derivative works. These actions are
+prohibited by law if you do not accept this License. Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+ 6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions. You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+ 7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License. If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all. For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices. Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+ 8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded. In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+ 9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time. Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number. If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation. If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+ 10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission. For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this. Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+ NO WARRANTY
+
+ 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+ 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+ END OF TERMS AND CONDITIONS
+
+ How to Apply These Terms to Your New Programs
+
+ If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+ To do so, attach the following notices to the program. It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+ <one line to give the program's name and a brief idea of what it does.>
+ Copyright (C) <year> <name of author>
+
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ GNU General Public License for more details.
+
+ You should have received a copy of the GNU General Public License along
+ with this program; if not, write to the Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+ Gnomovision version 69, Copyright (C) year name of author
+ Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+ This is free software, and you are welcome to redistribute it
+ under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License. Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary. Here is a sample; alter the names:
+
+ Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+ `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+ <signature of Ty Coon>, 1 April 1989
+ Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs. If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library. If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.
Added: ROChat/trunk/build.xml
===================================================================
--- ROChat/trunk/build.xml (rev 0)
+++ ROChat/trunk/build.xml 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,69 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!-- You may freely edit this file. See commented blocks below for -->
+<!-- some examples of how to customize the build. -->
+<!-- (If you delete it and reopen the project it will be recreated.) -->
+<project name="ROChat" default="default" basedir=".">
+ <description>Builds, tests, and runs the project ROChat.</description>
+ <import file="nbproject/build-impl.xml"/>
+ <!--
+
+ There exist several targets which are by default empty and which can be
+ used for execution of your tasks. These targets are usually executed
+ before and after some main targets. They are:
+
+ -pre-init: called before initialization of project properties
+ -post-init: called after initialization of project properties
+ -pre-compile: called before javac compilation
+ -post-compile: called after javac compilation
+ -pre-compile-single: called before javac compilation of single file
+ -post-compile-single: called after javac compilation of single file
+ -pre-compile-test: called before javac compilation of JUnit tests
+ -post-compile-test: called after javac compilation of JUnit tests
+ -pre-compile-test-single: called before javac compilation of single JUnit test
+ -post-compile-test-single: called after javac compilation of single JUunit test
+ -pre-jar: called before JAR building
+ -post-jar: called after JAR building
+ -post-clean: called after cleaning build products
+
+ (Targets beginning with '-' are not intended to be called on their own.)
+
+ Example of inserting an obfuscator after compilation could look like this:
+
+ <target name="-post-compile">
+ <obfuscate>
+ <fileset dir="${build.classes.dir}"/>
+ </obfuscate>
+ </target>
+
+ For list of available properties check the imported
+ nbproject/build-impl.xml file.
+
+
+ Another way to customize the build is by overriding existing main targets.
+ The targets of interest are:
+
+ -init-macrodef-javac: defines macro for javac compilation
+ -init-macrodef-junit: defines macro for junit execution
+ -init-macrodef-debug: defines macro for class debugging
+ -init-macrodef-java: defines macro for class execution
+ -do-jar-with-manifest: JAR building (if you are using a manifest)
+ -do-jar-without-manifest: JAR building (if you are not using a manifest)
+ run: execution of project
+ -javadoc-build: Javadoc generation
+ test-report: JUnit report generation
+
+ An example of overriding the target for project execution could look like this:
+
+ <target name="run" depends="ROChat-impl.jar">
+ <exec dir="bin" executable="launcher.exe">
+ <arg file="${dist.jar}"/>
+ </exec>
+ </target>
+
+ Notice that the overridden target depends on the jar target and not only on
+ the compile target as the regular run target does. Again, for a list of available
+ properties which you can use, check the target you are overriding in the
+ nbproject/build-impl.xml file.
+
+ -->
+</project>
Added: ROChat/trunk/nbproject/build-impl.xml
===================================================================
--- ROChat/trunk/nbproject/build-impl.xml (rev 0)
+++ ROChat/trunk/nbproject/build-impl.xml 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,616 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<!--
+*** GENERATED FROM project.xml - DO NOT EDIT ***
+*** EDIT ../build.xml INSTEAD ***
+
+For the purpose of easier reading the script
+is divided into following sections:
+
+ - initialization
+ - compilation
+ - jar
+ - execution
+ - debugging
+ - javadoc
+ - junit compilation
+ - junit execution
+ - junit debugging
+ - applet
+ - cleanup
+
+ -->
+<project xmlns:j2seproject1="http://www.netbeans.org/ns/j2se-project/1" xmlns:j2seproject2="http://www.netbeans.org/ns/j2se-project/2" xmlns:j2seproject3="http://www.netbeans.org/ns/j2se-project/3" xmlns:jaxrpc="http://www.netbeans.org/ns/j2se-project/jax-rpc" basedir=".." default="default" name="ROChat-impl">
+ <target depends="test,jar,javadoc" description="Build and test whole project." name="default"/>
+ <!--
+ ======================
+ INITIALIZATION SECTION
+ ======================
+ -->
+ <target name="-pre-init">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="-pre-init" name="-init-private">
+ <property file="nbproject/private/config.properties"/>
+ <property file="nbproject/private/configs/${config}.properties"/>
+ <property file="nbproject/private/private.properties"/>
+ </target>
+ <target depends="-pre-init,-init-private" name="-init-user">
+ <property file="${user.properties.file}"/>
+ <!-- The two properties below are usually overridden -->
+ <!-- by the active platform. Just a fallback. -->
+ <property name="default.javac.source" value="1.4"/>
+ <property name="default.javac.target" value="1.4"/>
+ </target>
+ <target depends="-pre-init,-init-private,-init-user" name="-init-project">
+ <property file="nbproject/configs/${config}.properties"/>
+ <property file="nbproject/project.properties"/>
+ </target>
+ <target depends="-pre-init,-init-private,-init-user,-init-project,-init-macrodef-property" name="-do-init">
+ <available file="${manifest.file}" property="manifest.available"/>
+ <condition property="manifest.available+main.class">
+ <and>
+ <isset property="manifest.available"/>
+ <isset property="main.class"/>
+ <not>
+ <equals arg1="${main.class}" arg2="" trim="true"/>
+ </not>
+ </and>
+ </condition>
+ <condition property="manifest.available+main.class+mkdist.available">
+ <and>
+ <istrue value="${manifest.available+main.class}"/>
+ <isset property="libs.CopyLibs.classpath"/>
+ </and>
+ </condition>
+ <condition property="have.tests">
+ <or/>
+ </condition>
+ <condition property="have.sources">
+ <or>
+ <available file="${src.dir}"/>
+ </or>
+ </condition>
+ <condition property="netbeans.home+have.tests">
+ <and>
+ <isset property="netbeans.home"/>
+ <isset property="have.tests"/>
+ </and>
+ </condition>
+ <condition property="no.javadoc.preview">
+ <and>
+ <isset property="javadoc.preview"/>
+ <isfalse value="${javadoc.preview}"/>
+ </and>
+ </condition>
+ <property name="run.jvmargs" value=""/>
+ <property name="javac.compilerargs" value=""/>
+ <property name="work.dir" value="${basedir}"/>
+ <condition property="no.deps">
+ <and>
+ <istrue value="${no.dependencies}"/>
+ </and>
+ </condition>
+ <property name="javac.debug" value="true"/>
+ <property name="javadoc.preview" value="true"/>
+ <property name="application.args" value=""/>
+ <property name="source.encoding" value="${file.encoding}"/>
+ <condition property="javadoc.encoding.used" value="${javadoc.encoding}">
+ <and>
+ <isset property="javadoc.encoding"/>
+ <not>
+ <equals arg1="${javadoc.encoding}" arg2=""/>
+ </not>
+ </and>
+ </condition>
+ <property name="javadoc.encoding.used" value="${source.encoding}"/>
+ <property name="includes" value="**"/>
+ <property name="excludes" value=""/>
+ <property name="do.depend" value="false"/>
+ <condition property="do.depend.true">
+ <istrue value="${do.depend}"/>
+ </condition>
+ <condition else="" property="javac.compilerargs.jaxws" value="-Djava.endorsed.dirs='${jaxws.endorsed.dir}'">
+ <and>
+ <isset property="jaxws.endorsed.dir"/>
+ <available file="nbproject/jaxws-build.xml"/>
+ </and>
+ </condition>
+ </target>
+ <target name="-post-init">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init" name="-init-check">
+ <fail unless="src.dir">Must set src.dir</fail>
+ <fail unless="build.dir">Must set build.dir</fail>
+ <fail unless="dist.dir">Must set dist.dir</fail>
+ <fail unless="build.classes.dir">Must set build.classes.dir</fail>
+ <fail unless="dist.javadoc.dir">Must set dist.javadoc.dir</fail>
+ <fail unless="build.test.classes.dir">Must set build.test.classes.dir</fail>
+ <fail unless="build.test.results.dir">Must set build.test.results.dir</fail>
+ <fail unless="build.classes.excludes">Must set build.classes.excludes</fail>
+ <fail unless="dist.jar">Must set dist.jar</fail>
+ </target>
+ <target name="-init-macrodef-property">
+ <macrodef name="property" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute name="name"/>
+ <attribute name="value"/>
+ <sequential>
+ <property name="@{name}" value="${@{value}}"/>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-javac">
+ <macrodef name="javac" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${src.dir}" name="srcdir"/>
+ <attribute default="${build.classes.dir}" name="destdir"/>
+ <attribute default="${javac.classpath}" name="classpath"/>
+ <attribute default="${includes}" name="includes"/>
+ <attribute default="${excludes}" name="excludes"/>
+ <attribute default="${javac.debug}" name="debug"/>
+ <attribute default="" name="sourcepath"/>
+ <element name="customize" optional="true"/>
+ <sequential>
+ <javac debug="@{debug}" deprecation="${javac.deprecation}" destdir="@{destdir}" encoding="${source.encoding}" excludes="@{excludes}" includeantruntime="false" includes="@{includes}" source="${javac.source}" sourcepath="@{sourcepath}" srcdir="@{srcdir}" target="${javac.target}">
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ <compilerarg line="${javac.compilerargs} ${javac.compilerargs.jaxws}"/>
+ <customize/>
+ </javac>
+ </sequential>
+ </macrodef>
+ <macrodef name="depend" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${src.dir}" name="srcdir"/>
+ <attribute default="${build.classes.dir}" name="destdir"/>
+ <attribute default="${javac.classpath}" name="classpath"/>
+ <sequential>
+ <depend cache="${build.dir}/depcache" destdir="@{destdir}" excludes="${excludes}" includes="${includes}" srcdir="@{srcdir}">
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ </depend>
+ </sequential>
+ </macrodef>
+ <macrodef name="force-recompile" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${build.classes.dir}" name="destdir"/>
+ <sequential>
+ <fail unless="javac.includes">Must set javac.includes</fail>
+ <pathconvert pathsep="," property="javac.includes.binary">
+ <path>
+ <filelist dir="@{destdir}" files="${javac.includes}"/>
+ </path>
+ <globmapper from="*.java" to="*.class"/>
+ </pathconvert>
+ <delete>
+ <files includes="${javac.includes.binary}"/>
+ </delete>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-junit">
+ <macrodef name="junit" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${includes}" name="includes"/>
+ <attribute default="${excludes}" name="excludes"/>
+ <attribute default="**" name="testincludes"/>
+ <sequential>
+ <junit dir="${work.dir}" errorproperty="tests.failed" failureproperty="tests.failed" fork="true" showoutput="true">
+ <batchtest todir="${build.test.results.dir}"/>
+ <classpath>
+ <path path="${run.test.classpath}"/>
+ </classpath>
+ <syspropertyset>
+ <propertyref prefix="test-sys-prop."/>
+ <mapper from="test-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <formatter type="brief" usefile="false"/>
+ <formatter type="xml"/>
+ <jvmarg line="${run.jvmargs}"/>
+ </junit>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-nbjpda">
+ <macrodef name="nbjpdastart" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute default="${main.class}" name="name"/>
+ <attribute default="${debug.classpath}" name="classpath"/>
+ <attribute default="" name="stopclassname"/>
+ <sequential>
+ <nbjpdastart addressproperty="jpda.address" name="@{name}" stopclassname="@{stopclassname}" transport="dt_socket">
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ </nbjpdastart>
+ </sequential>
+ </macrodef>
+ <macrodef name="nbjpdareload" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute default="${build.classes.dir}" name="dir"/>
+ <sequential>
+ <nbjpdareload>
+ <fileset dir="@{dir}" includes="${fix.includes}*.class"/>
+ </nbjpdareload>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-debug-args">
+ <property name="version-output" value="java version "${ant.java.version}"/>
+ <condition property="have-jdk-older-than-1.4">
+ <or>
+ <contains string="${version-output}" substring="java version "1.0"/>
+ <contains string="${version-output}" substring="java version "1.1"/>
+ <contains string="${version-output}" substring="java version "1.2"/>
+ <contains string="${version-output}" substring="java version "1.3"/>
+ </or>
+ </condition>
+ <condition else="-Xdebug" property="debug-args-line" value="-Xdebug -Xnoagent -Djava.compiler=none">
+ <istrue value="${have-jdk-older-than-1.4}"/>
+ </condition>
+ </target>
+ <target depends="-init-debug-args" name="-init-macrodef-debug">
+ <macrodef name="debug" uri="http://www.netbeans.org/ns/j2se-project/3">
+ <attribute default="${main.class}" name="classname"/>
+ <attribute default="${debug.classpath}" name="classpath"/>
+ <element name="customize" optional="true"/>
+ <sequential>
+ <java classname="@{classname}" dir="${work.dir}" fork="true">
+ <jvmarg line="${debug-args-line}"/>
+ <jvmarg value="-Xrunjdwp:transport=dt_socket,address=${jpda.address}"/>
+ <jvmarg line="${run.jvmargs}"/>
+ <classpath>
+ <path path="@{classpath}"/>
+ </classpath>
+ <syspropertyset>
+ <propertyref prefix="run-sys-prop."/>
+ <mapper from="run-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <customize/>
+ </java>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-macrodef-java">
+ <macrodef name="java" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <attribute default="${main.class}" name="classname"/>
+ <element name="customize" optional="true"/>
+ <sequential>
+ <java classname="@{classname}" dir="${work.dir}" fork="true">
+ <jvmarg line="${run.jvmargs}"/>
+ <classpath>
+ <path path="${run.classpath}"/>
+ </classpath>
+ <syspropertyset>
+ <propertyref prefix="run-sys-prop."/>
+ <mapper from="run-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <customize/>
+ </java>
+ </sequential>
+ </macrodef>
+ </target>
+ <target name="-init-presetdef-jar">
+ <presetdef name="jar" uri="http://www.netbeans.org/ns/j2se-project/1">
+ <jar compress="${jar.compress}" jarfile="${dist.jar}">
+ <j2seproject1:fileset dir="${build.classes.dir}"/>
+ </jar>
+ </presetdef>
+ </target>
+ <target depends="-pre-init,-init-private,-init-user,-init-project,-do-init,-post-init,-init-check,-init-macrodef-property,-init-macrodef-javac,-init-macrodef-junit,-init-macrodef-nbjpda,-init-macrodef-debug,-init-macrodef-java,-init-presetdef-jar" name="init"/>
+ <!--
+ ===================
+ COMPILATION SECTION
+ ===================
+ -->
+ <target depends="init" name="deps-jar" unless="no.deps"/>
+ <target depends="init,deps-jar" name="-pre-pre-compile">
+ <mkdir dir="${build.classes.dir}"/>
+ </target>
+ <target name="-pre-compile">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target if="do.depend.true" name="-compile-depend">
+ <j2seproject3:depend/>
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-compile-depend" if="have.sources" name="-do-compile">
+ <j2seproject3:javac/>
+ <copy todir="${build.classes.dir}">
+ <fileset dir="${src.dir}" excludes="${build.classes.excludes},${excludes}" includes="${includes}"/>
+ </copy>
+ </target>
+ <target name="-post-compile">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile,-pre-compile,-do-compile,-post-compile" description="Compile project." name="compile"/>
+ <target name="-pre-compile-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile" name="-do-compile-single">
+ <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
+ <j2seproject3:force-recompile/>
+ <j2seproject3:javac excludes="" includes="${javac.includes}" sourcepath="${src.dir}"/>
+ </target>
+ <target name="-post-compile-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-jar,-pre-pre-compile,-pre-compile-single,-do-compile-single,-post-compile-single" name="compile-single"/>
+ <!--
+ ====================
+ JAR BUILDING SECTION
+ ====================
+ -->
+ <target depends="init" name="-pre-pre-jar">
+ <dirname file="${dist.jar}" property="dist.jar.dir"/>
+ <mkdir dir="${dist.jar.dir}"/>
+ </target>
+ <target name="-pre-jar">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" name="-do-jar-without-manifest" unless="manifest.available">
+ <j2seproject1:jar/>
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available" name="-do-jar-with-manifest" unless="manifest.available+main.class">
+ <j2seproject1:jar manifest="${manifest.file}"/>
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class" name="-do-jar-with-mainclass" unless="manifest.available+main.class+mkdist.available">
+ <j2seproject1:jar manifest="${manifest.file}">
+ <j2seproject1:manifest>
+ <j2seproject1:attribute name="Main-Class" value="${main.class}"/>
+ </j2seproject1:manifest>
+ </j2seproject1:jar>
+ <echo>To run this application from the command line without Ant, try:</echo>
+ <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
+ <property location="${dist.jar}" name="dist.jar.resolved"/>
+ <pathconvert property="run.classpath.with.dist.jar">
+ <path path="${run.classpath}"/>
+ <map from="${build.classes.dir.resolved}" to="${dist.jar.resolved}"/>
+ </pathconvert>
+ <echo>java -cp "${run.classpath.with.dist.jar}" ${main.class}</echo>
+ </target>
+ <target depends="init,compile,-pre-pre-jar,-pre-jar" if="manifest.available+main.class+mkdist.available" name="-do-jar-with-libraries">
+ <property location="${build.classes.dir}" name="build.classes.dir.resolved"/>
+ <pathconvert property="run.classpath.without.build.classes.dir">
+ <path path="${run.classpath}"/>
+ <map from="${build.classes.dir.resolved}" to=""/>
+ </pathconvert>
+ <pathconvert pathsep=" " property="jar.classpath">
+ <path path="${run.classpath.without.build.classes.dir}"/>
+ <chainedmapper>
+ <flattenmapper/>
+ <globmapper from="*" to="lib/*"/>
+ </chainedmapper>
+ </pathconvert>
+ <taskdef classname="org.netbeans.modules.java.j2seproject.copylibstask.CopyLibs" classpath="${libs.CopyLibs.classpath}" name="copylibs"/>
+ <copylibs compress="${jar.compress}" jarfile="${dist.jar}" manifest="${manifest.file}" runtimeclasspath="${run.classpath.without.build.classes.dir}">
+ <fileset dir="${build.classes.dir}"/>
+ <manifest>
+ <attribute name="Main-Class" value="${main.class}"/>
+ <attribute name="Class-Path" value="${jar.classpath}"/>
+ </manifest>
+ </copylibs>
+ <echo>To run this application from the command line without Ant, try:</echo>
+ <property location="${dist.jar}" name="dist.jar.resolved"/>
+ <echo>java -jar "${dist.jar.resolved}"</echo>
+ </target>
+ <target name="-post-jar">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-jar,-do-jar-with-manifest,-do-jar-without-manifest,-do-jar-with-mainclass,-do-jar-with-libraries,-post-jar" description="Build JAR." name="jar"/>
+ <!--
+ =================
+ EXECUTION SECTION
+ =================
+ -->
+ <target depends="init,compile" description="Run a main class." name="run">
+ <j2seproject1:java>
+ <customize>
+ <arg line="${application.args}"/>
+ </customize>
+ </j2seproject1:java>
+ </target>
+ <target name="-do-not-recompile">
+ <property name="javac.includes.binary" value=""/>
+ </target>
+ <target depends="init,-do-not-recompile,compile-single" name="run-single">
+ <fail unless="run.class">Must select one file in the IDE or set run.class</fail>
+ <j2seproject1:java classname="${run.class}"/>
+ </target>
+ <!--
+ =================
+ DEBUGGING SECTION
+ =================
+ -->
+ <target depends="init" if="netbeans.home" name="-debug-start-debugger">
+ <j2seproject1:nbjpdastart name="${debug.class}"/>
+ </target>
+ <target depends="init,compile" name="-debug-start-debuggee">
+ <j2seproject3:debug>
+ <customize>
+ <arg line="${application.args}"/>
+ </customize>
+ </j2seproject3:debug>
+ </target>
+ <target depends="init,compile,-debug-start-debugger,-debug-start-debuggee" description="Debug project in IDE." if="netbeans.home" name="debug"/>
+ <target depends="init" if="netbeans.home" name="-debug-start-debugger-stepinto">
+ <j2seproject1:nbjpdastart stopclassname="${main.class}"/>
+ </target>
+ <target depends="init,compile,-debug-start-debugger-stepinto,-debug-start-debuggee" if="netbeans.home" name="debug-stepinto"/>
+ <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-single">
+ <fail unless="debug.class">Must select one file in the IDE or set debug.class</fail>
+ <j2seproject3:debug classname="${debug.class}"/>
+ </target>
+ <target depends="init,-do-not-recompile,compile-single,-debug-start-debugger,-debug-start-debuggee-single" if="netbeans.home" name="debug-single"/>
+ <target depends="init" name="-pre-debug-fix">
+ <fail unless="fix.includes">Must set fix.includes</fail>
+ <property name="javac.includes" value="${fix.includes}.java"/>
+ </target>
+ <target depends="init,-pre-debug-fix,compile-single" if="netbeans.home" name="-do-debug-fix">
+ <j2seproject1:nbjpdareload/>
+ </target>
+ <target depends="init,-pre-debug-fix,-do-debug-fix" if="netbeans.home" name="debug-fix"/>
+ <!--
+ ===============
+ JAVADOC SECTION
+ ===============
+ -->
+ <target depends="init" name="-javadoc-build">
+ <mkdir dir="${dist.javadoc.dir}"/>
+ <javadoc additionalparam="${javadoc.additionalparam}" author="${javadoc.author}" charset="UTF-8" destdir="${dist.javadoc.dir}" docencoding="UTF-8" encoding="${javadoc.encoding.used}" failonerror="true" noindex="${javadoc.noindex}" nonavbar="${javadoc.nonavbar}" notree="${javadoc.notree}" private="${javadoc.private}" source="${javac.source}" splitindex="${javadoc.splitindex}" use="${javadoc.use}" useexternalfile="true" version="${javadoc.version}" windowtitle="${javadoc.windowtitle}">
+ <classpath>
+ <path path="${javac.classpath}"/>
+ </classpath>
+ <fileset dir="${src.dir}" excludes="${excludes}" includes="${includes}">
+ <filename name="**/*.java"/>
+ </fileset>
+ </javadoc>
+ </target>
+ <target depends="init,-javadoc-build" if="netbeans.home" name="-javadoc-browse" unless="no.javadoc.preview">
+ <nbbrowse file="${dist.javadoc.dir}/index.html"/>
+ </target>
+ <target depends="init,-javadoc-build,-javadoc-browse" description="Build Javadoc." name="javadoc"/>
+ <!--
+ =========================
+ JUNIT COMPILATION SECTION
+ =========================
+ -->
+ <target depends="init,compile" if="have.tests" name="-pre-pre-compile-test">
+ <mkdir dir="${build.test.classes.dir}"/>
+ </target>
+ <target name="-pre-compile-test">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target if="do.depend.true" name="-compile-test-depend">
+ <j2seproject3:depend classpath="${javac.test.classpath}" destdir="${build.test.classes.dir}" srcdir=""/>
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-compile-test-depend" if="have.tests" name="-do-compile-test">
+ <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" srcdir=""/>
+ <copy todir="${build.test.classes.dir}"/>
+ </target>
+ <target name="-post-compile-test">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test,-do-compile-test,-post-compile-test" name="compile-test"/>
+ <target name="-pre-compile-test-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single" if="have.tests" name="-do-compile-test-single">
+ <fail unless="javac.includes">Must select some files in the IDE or set javac.includes</fail>
+ <j2seproject3:force-recompile destdir="${build.test.classes.dir}"/>
+ <j2seproject3:javac classpath="${javac.test.classpath}" debug="true" destdir="${build.test.classes.dir}" excludes="" includes="${javac.includes}" sourcepath="" srcdir=""/>
+ <copy todir="${build.test.classes.dir}"/>
+ </target>
+ <target name="-post-compile-test-single">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,compile,-pre-pre-compile-test,-pre-compile-test-single,-do-compile-test-single,-post-compile-test-single" name="compile-test-single"/>
+ <!--
+ =======================
+ JUNIT EXECUTION SECTION
+ =======================
+ -->
+ <target depends="init" if="have.tests" name="-pre-test-run">
+ <mkdir dir="${build.test.results.dir}"/>
+ </target>
+ <target depends="init,compile-test,-pre-test-run" if="have.tests" name="-do-test-run">
+ <j2seproject3:junit testincludes="**/*Test.java"/>
+ </target>
+ <target depends="init,compile-test,-pre-test-run,-do-test-run" if="have.tests" name="-post-test-run">
+ <fail if="tests.failed">Some tests failed; see details above.</fail>
+ </target>
+ <target depends="init" if="have.tests" name="test-report"/>
+ <target depends="init" if="netbeans.home+have.tests" name="-test-browse"/>
+ <target depends="init,compile-test,-pre-test-run,-do-test-run,test-report,-post-test-run,-test-browse" description="Run unit tests." name="test"/>
+ <target depends="init" if="have.tests" name="-pre-test-run-single">
+ <mkdir dir="${build.test.results.dir}"/>
+ </target>
+ <target depends="init,compile-test-single,-pre-test-run-single" if="have.tests" name="-do-test-run-single">
+ <fail unless="test.includes">Must select some files in the IDE or set test.includes</fail>
+ <j2seproject3:junit excludes="" includes="${test.includes}"/>
+ </target>
+ <target depends="init,compile-test-single,-pre-test-run-single,-do-test-run-single" if="have.tests" name="-post-test-run-single">
+ <fail if="tests.failed">Some tests failed; see details above.</fail>
+ </target>
+ <target depends="init,-do-not-recompile,compile-test-single,-pre-test-run-single,-do-test-run-single,-post-test-run-single" description="Run single unit test." name="test-single"/>
+ <!--
+ =======================
+ JUNIT DEBUGGING SECTION
+ =======================
+ -->
+ <target depends="init,compile-test" if="have.tests" name="-debug-start-debuggee-test">
+ <fail unless="test.class">Must select one file in the IDE or set test.class</fail>
+ <property location="${build.test.results.dir}/TEST-${test.class}.xml" name="test.report.file"/>
+ <delete file="${test.report.file}"/>
+ <mkdir dir="${build.test.results.dir}"/>
+ <j2seproject3:debug classname="org.apache.tools.ant.taskdefs.optional.junit.JUnitTestRunner" classpath="${ant.home}/lib/ant.jar:${ant.home}/lib/ant-junit.jar:${debug.test.classpath}">
+ <customize>
+ <syspropertyset>
+ <propertyref prefix="test-sys-prop."/>
+ <mapper from="test-sys-prop.*" to="*" type="glob"/>
+ </syspropertyset>
+ <arg value="${test.class}"/>
+ <arg value="showoutput=true"/>
+ <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.BriefJUnitResultFormatter"/>
+ <arg value="formatter=org.apache.tools.ant.taskdefs.optional.junit.XMLJUnitResultFormatter,${test.report.file}"/>
+ </customize>
+ </j2seproject3:debug>
+ </target>
+ <target depends="init,compile-test" if="netbeans.home+have.tests" name="-debug-start-debugger-test">
+ <j2seproject1:nbjpdastart classpath="${debug.test.classpath}" name="${test.class}"/>
+ </target>
+ <target depends="init,-do-not-recompile,compile-test-single,-debug-start-debugger-test,-debug-start-debuggee-test" name="debug-test"/>
+ <target depends="init,-pre-debug-fix,compile-test-single" if="netbeans.home" name="-do-debug-fix-test">
+ <j2seproject1:nbjpdareload dir="${build.test.classes.dir}"/>
+ </target>
+ <target depends="init,-pre-debug-fix,-do-debug-fix-test" if="netbeans.home" name="debug-fix-test"/>
+ <!--
+ =========================
+ APPLET EXECUTION SECTION
+ =========================
+ -->
+ <target depends="init,compile-single" name="run-applet">
+ <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
+ <j2seproject1:java classname="sun.applet.AppletViewer">
+ <customize>
+ <arg value="${applet.url}"/>
+ </customize>
+ </j2seproject1:java>
+ </target>
+ <!--
+ =========================
+ APPLET DEBUGGING SECTION
+ =========================
+ -->
+ <target depends="init,compile-single" if="netbeans.home" name="-debug-start-debuggee-applet">
+ <fail unless="applet.url">Must select one file in the IDE or set applet.url</fail>
+ <j2seproject3:debug classname="sun.applet.AppletViewer">
+ <customize>
+ <arg value="${applet.url}"/>
+ </customize>
+ </j2seproject3:debug>
+ </target>
+ <target depends="init,compile-single,-debug-start-debugger,-debug-start-debuggee-applet" if="netbeans.home" name="debug-applet"/>
+ <!--
+ ===============
+ CLEANUP SECTION
+ ===============
+ -->
+ <target depends="init" name="deps-clean" unless="no.deps"/>
+ <target depends="init" name="-do-clean">
+ <delete dir="${build.dir}"/>
+ <delete dir="${dist.dir}"/>
+ </target>
+ <target name="-post-clean">
+ <!-- Empty placeholder for easier customization. -->
+ <!-- You can override this target in the ../build.xml file. -->
+ </target>
+ <target depends="init,deps-clean,-do-clean,-post-clean" description="Clean build products." name="clean"/>
+</project>
Added: ROChat/trunk/nbproject/genfiles.properties
===================================================================
--- ROChat/trunk/nbproject/genfiles.properties (rev 0)
+++ ROChat/trunk/nbproject/genfiles.properties 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,8 @@
+build.xml.data.CRC32=45f2cdb8
+build.xml.script.CRC32=11fe3129
+build.xml.stylesheet.CRC32=be360661
+# This file is used by a NetBeans-based IDE to track changes in generated files such as build-impl.xml.
+# Do not edit this file. You may delete it but then the IDE will never regenerate such files for you.
+nbproject/build-impl.xml.data.CRC32=45f2cdb8
+nbproject/build-impl.xml.script.CRC32=a6d6172c
+nbproject/build-impl.xml.stylesheet.CRC32=f1d9da08
Added: ROChat/trunk/nbproject/project.properties
===================================================================
--- ROChat/trunk/nbproject/project.properties (rev 0)
+++ ROChat/trunk/nbproject/project.properties 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,58 @@
+application.args=
+build.classes.dir=${build.dir}/classes
+build.classes.excludes=**/*.java,**/*.form
+# This directory is removed when the project is cleaned:
+build.dir=build
+build.generated.dir=${build.dir}/generated
+# Only compile against the classpath explicitly listed here:
+build.sysclasspath=ignore
+build.test.classes.dir=${build.dir}/test/classes
+build.test.results.dir=${build.dir}/test/results
+debug.classpath=\
+ ${run.classpath}
+debug.test.classpath=\
+ ${run.test.classpath}
+# This directory is removed when the project is cleaned:
+dist.dir=dist
+dist.jar=${dist.dir}/ROChat.jar
+dist.javadoc.dir=${dist.dir}/javadoc
+excludes=
+file.reference.trunk-src=src
+includes=**
+jar.compress=false
+javac.classpath=
+# Space-separated list of extra javac options
+javac.compilerargs=
+javac.deprecation=false
+javac.source=1.6
+javac.target=1.6
+javac.test.classpath=\
+ ${javac.classpath}:\
+ ${build.classes.dir}:\
+ ${libs.junit.classpath}
+javadoc.additionalparam=
+javadoc.author=false
+javadoc.encoding=
+javadoc.noindex=false
+javadoc.nonavbar=false
+javadoc.notree=false
+javadoc.private=false
+javadoc.splitindex=true
+javadoc.use=true
+javadoc.version=false
+javadoc.windowtitle=
+main.class=net.sensiva.rochat.ui.init.Initializer
+manifest.file=manifest.mf
+meta.inf.dir=${src.dir}/META-INF
+platform.active=default_platform
+run.classpath=\
+ ${javac.classpath}:\
+ ${build.classes.dir}
+# Space-separated list of JVM arguments used when running the project
+# (you may also define separate properties like run-sys-prop.name=value instead of -Dname=value
+# or test-sys-prop.name=value to set system properties for unit tests):
+run.jvmargs=
+run.test.classpath=\
+ ${javac.test.classpath}:\
+ ${build.test.classes.dir}
+src.dir=${file.reference.trunk-src}
Added: ROChat/trunk/nbproject/project.xml
===================================================================
--- ROChat/trunk/nbproject/project.xml (rev 0)
+++ ROChat/trunk/nbproject/project.xml 2008-05-17 11:49:27 UTC (rev 41)
@@ -0,0 +1,14 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://www.netbeans.org/ns/project/1">
+ <type>org.netbeans.modules.java.j2seproject</type>
+ <configuration>
+ <data xmlns="http://www.netbeans.org/ns/j2se-project/3">
+ <name>ROChat</name>
+ <minimum-ant-version>1.6.5</minimum-ant-version>
+ <source-roots>
+ <root id="src.dir"/>
+ </source-roots>
+ <test-roots/>
+ </data>
+ </configuration>
+</project>
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
