Thread: Re: [Rlib-users] Please Try This Before I make a release

Brought to you by: chet99, woobster

rlib-users

Re: [Rlib-users] Please Try This Before I make a release

From: Farryp <fa...@co...> - 2004-06-28 15:18:57

Hey All,

I just tested the install on fedora core 1.0.

I found 2 little problems.

    1-  pdf.c was missing from the librc directory.  (I got it from the 1.1.8
version and it compiled)
    2- I still had to use --prefix=/usr/  I was trying to have it installed
into /usr/local/rlib but it still had problems finding python.h.  Is there is
some flag I can pass to ./configure to let it know where to find pythin.h ?
    3- I nedd to have root permission when running make.  After running
./configure --prefix=/usr, I got the following error message.  (sudo fixed the
problem )

FATAL: can't create .libs/python.o: Permission denied (look bellow for more
detail)

....
Making all in bindings
make[2]: Entering directory `/home/farryp/rlib-1.1.9/bindings'
Making all in php
make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/php'
make[3]: Nothing to be done for `all'.
make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/php'
Making all in python
make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/python'
source='python.c' object='python.lo' libtool=yes \
depfile='.deps/python.Plo' tmpdepfile='.deps/python.TPlo' \
depmode=gcc3 /bin/sh ../../depcomp \
/bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..
-I../../libsrc/ -I/usr/include/libxml2   -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include   -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include   -I'/usr/include/mysql' -I /usr/include
-I/usr/include -I/usr/include/php -I/usr/include/php/main
-I/usr/include/php/Zend -I/usr/include/php/TSRM -I /usr/include/python2.2
-fno-strict-aliasing    -g -O2 -c -o python.lo `test -f 'python.c' || echo
'./'`python.c
 gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../libsrc/ -I/usr/include/libxml2
-I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/glib-2.0
-I/usr/lib/glib-2.0/include -I/usr/include/mysql -I /usr/include
-I/usr/include -I/usr/include/php -I/usr/include/php/main
-I/usr/include/php/Zend -I/usr/include/php/TSRM -I /usr/include/python2.2
-fno-strict-aliasing -g -O2 -c python.c -MT python.lo -MD -MP -MF
.deps/python.TPlo  -fPIC -DPIC -o .libs/python.o
Assembler messages:
FATAL: can't create .libs/python.o: Permission denied
make[3]: *** [python.lo] Error 1
make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/python'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory `/home/farryp/rlib-1.1.9/bindings'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory `/home/farryp/rlib-1.1.9'
make: *** [all] Error 2


Thanks

Farry

Bob Doan (bd...@si...) wrote:
>
> Hey All,
>
> http://www.sicompos.com/~bdoan/rlib-1.1.9.tar.gz
>
> It has some bug fixes, ability to disable cpdf, non utf8 works
>
> Everton:
>
> What garbage is still coming out?
>
> - bob
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> digital self defense, top technical experts, no vendor pitches,
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Rlib-users mailing list
> Rli...@li...
> https://lists.sourceforge.net/lists/listinfo/rlib-users
>

Re: [Rlib-users] Please Try This Before I make a release

From: Farryp <fa...@co...> - 2004-06-28 15:52:05

Okay,

1- is fixed
2- make needed root access fixed (there was no files with root permission)
3- I still need to set prefix to /usr.
     I'm using fedora core 1.0.  Python.h is in /usr.

Best regards

Farry

Bob Doan (bd...@si...) wrote:
>
> Hi,
>
> Ok.. try again pdf.c should be in there
>
> As for the root when running make:
>
> Can you untar it clean somewhere can
>
> cd rlib-1.1.9
>
> ls -alR | grep root
>
> and see if there is anything?
>
> As for #2) What distro are you using?  I use the autoconf 1.8 M4 macros
> to try to find where python is because python does not use pkg-config
>
> - bob
>
>
> On Mon, 2004-06-28 at 15:24 +0000, Farryp Philippe-Auguste wrote:
> > Hey All,
> >
> > I just tested the install on fedora core 1.0.
> >
> > I found 2 little problems.
> >
> >     1-  pdf.c was missing from the librc directory.  (I got it from the 1.1.8
> > version and it compiled)
> >     2- I still had to use --prefix=/usr/  I was trying to have it installed
> > into /usr/local/rlib but it still had problems finding python.h.  Is there is
> > some flag I can pass to ./configure to let it know where to find pythin.h ?
> >     3- I nedd to have root permission when running make.  After running
> > ./configure --prefix=/usr, I got the following error message.  (sudo fixed the
> > problem )
> >
> > FATAL: can't create .libs/python.o: Permission denied (look bellow for more
> > detail)
> >
> > ....
> > Making all in bindings
> > make[2]: Entering directory `/home/farryp/rlib-1.1.9/bindings'
> > Making all in php
> > make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/php'
> > make[3]: Nothing to be done for `all'.
> > make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/php'
> > Making all in python
> > make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/python'
> > source='python.c' object='python.lo' libtool=yes
> > depfile='.deps/python.Plo' tmpdepfile='.deps/python.TPlo'
> > depmode=gcc3 /bin/sh ../../depcomp
> > /bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..
> > -I../../libsrc/ -I/usr/include/libxml2   -I/usr/include/glib-2.0
> > -I/usr/lib/glib-2.0/include   -I/usr/include/glib-2.0
> > -I/usr/lib/glib-2.0/include   -I'/usr/include/mysql' -I /usr/include
> > -I/usr/include -I/usr/include/php -I/usr/include/php/main
> > -I/usr/include/php/Zend -I/usr/include/php/TSRM -I /usr/include/python2.2
> > -fno-strict-aliasing    -g -O2 -c -o python.lo `test -f 'python.c' || echo
> > './'`python.c
> >  gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../libsrc/ -I/usr/include/libxml2
> > -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/glib-2.0
> > -I/usr/lib/glib-2.0/include -I/usr/include/mysql -I /usr/include
> > -I/usr/include -I/usr/include/php -I/usr/include/php/main
> > -I/usr/include/php/Zend -I/usr/include/php/TSRM -I /usr/include/python2.2
> > -fno-strict-aliasing -g -O2 -c python.c -MT python.lo -MD -MP -MF
> > .deps/python.TPlo  -fPIC -DPIC -o .libs/python.o
> > Assembler messages:
> > FATAL: can't create .libs/python.o: Permission denied
> > make[3]: *** [python.lo] Error 1
> > make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/python'
> > make[2]: *** [all-recursive] Error 1
> > make[2]: Leaving directory `/home/farryp/rlib-1.1.9/bindings'
> > make[1]: *** [all-recursive] Error 1
> > make[1]: Leaving directory `/home/farryp/rlib-1.1.9'
> > make: *** [all] Error 2
> >
> >
> > Thanks
> >
> > Farry
> >
> > Bob Doan (bd...@si...) wrote:
> > >
> > > Hey All,
> > >
> > > http://www.sicompos.com/~bdoan/rlib-1.1.9.tar.gz
> > >
> > > It has some bug fixes, ability to disable cpdf, non utf8 works
> > >
> > > Everton:
> > >
> > > What garbage is still coming out?
> > >
> > > - bob
> > >
> > >
> > >
> > > -------------------------------------------------------
> > > This SF.Net email sponsored by Black Hat Briefings & Training.
> > > Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> > > digital self defense, top technical experts, no vendor pitches,
> > > unmatched networking opportunities. Visit www.blackhat.com
> > > _______________________________________________
> > > Rlib-users mailing list
> > > Rli...@li...
> > > https://lists.sourceforge.net/lists/listinfo/rlib-users
> > >
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email sponsored by Black Hat Briefings & Training.
> > Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> > digital self defense, top technical experts, no vendor pitches,
> > unmatched networking opportunities. Visit www.blackhat.com
> > _______________________________________________
> > Rlib-users mailing list
> > Rli...@li...
> > https://lists.sourceforge.net/lists/listinfo/rlib-users
>
>

Re: [Rlib-users] Please Try This Before I make a release

From: Bob D. <bd...@si...> - 2004-06-28 15:32:35

Hi,

Ok.. try again pdf.c should be in there

As for the root when running make:

Can you untar it clean somewhere can

cd rlib-1.1.9

ls -alR | grep root

and see if there is anything?

As for #2) What distro are you using?  I use the autoconf 1.8 M4 macros
to try to find where python is because python does not use pkg-config

- bob


On Mon, 2004-06-28 at 15:24 +0000, Farryp Philippe-Auguste wrote:
> Hey All,
> 
> I just tested the install on fedora core 1.0.
> 
> I found 2 little problems.
> 
>     1-  pdf.c was missing from the librc directory.  (I got it from the 1.1.8
> version and it compiled)
>     2- I still had to use --prefix=/usr/  I was trying to have it installed
> into /usr/local/rlib but it still had problems finding python.h.  Is there is
> some flag I can pass to ./configure to let it know where to find pythin.h ?
>     3- I nedd to have root permission when running make.  After running
> ./configure --prefix=/usr, I got the following error message.  (sudo fixed the
> problem )
> 
> FATAL: can't create .libs/python.o: Permission denied (look bellow for more
> detail)
> 
> ....
> Making all in bindings
> make[2]: Entering directory `/home/farryp/rlib-1.1.9/bindings'
> Making all in php
> make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/php'
> make[3]: Nothing to be done for `all'.
> make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/php'
> Making all in python
> make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/python'
> source='python.c' object='python.lo' libtool=yes \
> depfile='.deps/python.Plo' tmpdepfile='.deps/python.TPlo' \
> depmode=gcc3 /bin/sh ../../depcomp \
> /bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..
> -I../../libsrc/ -I/usr/include/libxml2   -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include   -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include   -I'/usr/include/mysql' -I /usr/include
> -I/usr/include -I/usr/include/php -I/usr/include/php/main
> -I/usr/include/php/Zend -I/usr/include/php/TSRM -I /usr/include/python2.2
> -fno-strict-aliasing    -g -O2 -c -o python.lo `test -f 'python.c' || echo
> './'`python.c
>  gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../libsrc/ -I/usr/include/libxml2
> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/glib-2.0
> -I/usr/lib/glib-2.0/include -I/usr/include/mysql -I /usr/include
> -I/usr/include -I/usr/include/php -I/usr/include/php/main
> -I/usr/include/php/Zend -I/usr/include/php/TSRM -I /usr/include/python2.2
> -fno-strict-aliasing -g -O2 -c python.c -MT python.lo -MD -MP -MF
> .deps/python.TPlo  -fPIC -DPIC -o .libs/python.o
> Assembler messages:
> FATAL: can't create .libs/python.o: Permission denied
> make[3]: *** [python.lo] Error 1
> make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/python'
> make[2]: *** [all-recursive] Error 1
> make[2]: Leaving directory `/home/farryp/rlib-1.1.9/bindings'
> make[1]: *** [all-recursive] Error 1
> make[1]: Leaving directory `/home/farryp/rlib-1.1.9'
> make: *** [all] Error 2
> 
> 
> Thanks
> 
> Farry
> 
> Bob Doan (bd...@si...) wrote:
> >
> > Hey All,
> >
> > http://www.sicompos.com/~bdoan/rlib-1.1.9.tar.gz
> >
> > It has some bug fixes, ability to disable cpdf, non utf8 works
> >
> > Everton:
> >
> > What garbage is still coming out?
> >
> > - bob
> >
> >
> >
> > -------------------------------------------------------
> > This SF.Net email sponsored by Black Hat Briefings & Training.
> > Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> > digital self defense, top technical experts, no vendor pitches,
> > unmatched networking opportunities. Visit www.blackhat.com
> > _______________________________________________
> > Rlib-users mailing list
> > Rli...@li...
> > https://lists.sourceforge.net/lists/listinfo/rlib-users
> >
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 - 
> digital self defense, top technical experts, no vendor pitches, 
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Rlib-users mailing list
> Rli...@li...
> https://lists.sourceforge.net/lists/listinfo/rlib-users

Re: [Rlib-users] Please Try This Before I make a release

From: Bernardo A. <ber...@vi...> - 2004-06-28 15:47:38

Hi, I had problems with 1.1.8 (see my last post). Now I was just able to
compile and succesfully install 1.1.9. I had to manually copy pdf.c from
rlib1.1.8 though.

I haven't tried using it yet, I'll let you know in a couple of hours.

thx in advance

> Hi,
>
> Ok.. try again pdf.c should be in there
>
> As for the root when running make:
>
> Can you untar it clean somewhere can
>
> cd rlib-1.1.9
>
> ls -alR | grep root
>
> and see if there is anything?
>
> As for #2) What distro are you using?  I use the autoconf 1.8 M4 macros
> to try to find where python is because python does not use pkg-config
>
> - bob
>
>
> On Mon, 2004-06-28 at 15:24 +0000, Farryp Philippe-Auguste wrote:
>> Hey All,
>>
>> I just tested the install on fedora core 1.0.
>>
>> I found 2 little problems.
>>
>>     1-  pdf.c was missing from the librc directory.  (I got it from the
>> 1.1.8
>> version and it compiled)
>>     2- I still had to use --prefix=/usr/  I was trying to have it
>> installed
>> into /usr/local/rlib but it still had problems finding python.h.  Is
>> there is
>> some flag I can pass to ./configure to let it know where to find
>> pythin.h ?
>>     3- I nedd to have root permission when running make.  After running
>> ./configure --prefix=/usr, I got the following error message.  (sudo
>> fixed the
>> problem )
>>
>> FATAL: can't create .libs/python.o: Permission denied (look bellow for
>> more
>> detail)
>>
>> ....
>> Making all in bindings
>> make[2]: Entering directory `/home/farryp/rlib-1.1.9/bindings'
>> Making all in php
>> make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/php'
>> make[3]: Nothing to be done for `all'.
>> make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/php'
>> Making all in python
>> make[3]: Entering directory `/home/farryp/rlib-1.1.9/bindings/python'
>> source='python.c' object='python.lo' libtool=yes \
>> depfile='.deps/python.Plo' tmpdepfile='.deps/python.TPlo' \
>> depmode=gcc3 /bin/sh ../../depcomp \
>> /bin/sh ../../libtool --mode=compile gcc -DHAVE_CONFIG_H -I. -I. -I../..
>> -I../../libsrc/ -I/usr/include/libxml2   -I/usr/include/glib-2.0
>> -I/usr/lib/glib-2.0/include   -I/usr/include/glib-2.0
>> -I/usr/lib/glib-2.0/include   -I'/usr/include/mysql' -I /usr/include
>> -I/usr/include -I/usr/include/php -I/usr/include/php/main
>> -I/usr/include/php/Zend -I/usr/include/php/TSRM -I
>> /usr/include/python2.2
>> -fno-strict-aliasing    -g -O2 -c -o python.lo `test -f 'python.c' ||
>> echo
>> './'`python.c
>>  gcc -DHAVE_CONFIG_H -I. -I. -I../.. -I../../libsrc/
>> -I/usr/include/libxml2
>> -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include
>> -I/usr/include/glib-2.0
>> -I/usr/lib/glib-2.0/include -I/usr/include/mysql -I /usr/include
>> -I/usr/include -I/usr/include/php -I/usr/include/php/main
>> -I/usr/include/php/Zend -I/usr/include/php/TSRM -I
>> /usr/include/python2.2
>> -fno-strict-aliasing -g -O2 -c python.c -MT python.lo -MD -MP -MF
>> .deps/python.TPlo  -fPIC -DPIC -o .libs/python.o
>> Assembler messages:
>> FATAL: can't create .libs/python.o: Permission denied
>> make[3]: *** [python.lo] Error 1
>> make[3]: Leaving directory `/home/farryp/rlib-1.1.9/bindings/python'
>> make[2]: *** [all-recursive] Error 1
>> make[2]: Leaving directory `/home/farryp/rlib-1.1.9/bindings'
>> make[1]: *** [all-recursive] Error 1
>> make[1]: Leaving directory `/home/farryp/rlib-1.1.9'
>> make: *** [all] Error 2
>>
>>
>> Thanks
>>
>> Farry
>>
>> Bob Doan (bd...@si...) wrote:
>> >
>> > Hey All,
>> >
>> > http://www.sicompos.com/~bdoan/rlib-1.1.9.tar.gz
>> >
>> > It has some bug fixes, ability to disable cpdf, non utf8 works
>> >
>> > Everton:
>> >
>> > What garbage is still coming out?
>> >
>> > - bob
>> >
>> >
>> >
>> > -------------------------------------------------------
>> > This SF.Net email sponsored by Black Hat Briefings & Training.
>> > Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
>> > digital self defense, top technical experts, no vendor pitches,
>> > unmatched networking opportunities. Visit www.blackhat.com
>> > _______________________________________________
>> > Rlib-users mailing list
>> > Rli...@li...
>> > https://lists.sourceforge.net/lists/listinfo/rlib-users
>> >
>>
>>
>>
>> -------------------------------------------------------
>> This SF.Net email sponsored by Black Hat Briefings & Training.
>> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
>> digital self defense, top technical experts, no vendor pitches,
>> unmatched networking opportunities. Visit www.blackhat.com
>> _______________________________________________
>> Rlib-users mailing list
>> Rli...@li...
>> https://lists.sourceforge.net/lists/listinfo/rlib-users
>
>
>
> -------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings & Training.
> Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
> digital self defense, top technical experts, no vendor pitches,
> unmatched networking opportunities. Visit www.blackhat.com
> _______________________________________________
> Rlib-users mailing list
> Rli...@li...
> https://lists.sourceforge.net/lists/listinfo/rlib-users
>