Re: [Rlib-users] (no subject)

[Bob D. <bd...@si...>]

Ok

It's MySQL That wants openssl 

Perpahs you need to install that on your system.. or where is libssl on
your system??

On Thu, 2005-05-12 at 22:08 -0700, Dimitar Balinov wrote:
> I atach a Makefile!!!
> --- Bob Doan <bd...@si...> wrote:
> 
> > configure is supposed to check for everything.
> > 
> > I have no idea why your system wants to link w/ ssl.
> > 
> > Can you send me rlib-1.3.3/libsrc/Makefile*
> > 
> > - bob
> > 
> > On Thu, 2005-05-12 at 17:32 -0700, Dimitar Balinov
> > wrote:
> > > Is there a list with dependency packages, because
> > I
> > > have a error:
> > > namic -Wl,-rpath -Wl,/usr/lib -Wl,-soname
> > > -Wl,libr.so.1 -o .libs/libr.so.1.3.3
> > >
> >
> /usr/lib/gcc-lib/i586-suse-linux/3.3.4/../../../../i586-suse-linux/bin/ld:
> > > cannot find -lssl
> > > collect2: ld returned 1 exit status
> > > make[2]: *** [libr.la] Error 1
> > > make[2]: Leaving directory
> > > `/root/software/rlib-1.3.3/libsrc'
> > > make[1]: *** [all-recursive] Error 1
> > > make[1]: Leaving directory
> > `/root/software/rlib-1.3.3'
> > > make: *** [all] Error 2
> > > 
> > > 
> > > SORRY FOR EMBARRASSMENTS!!!
> > > --- Bob Doan <bd...@si...> wrote:
> > > 
> > > > Make sure you have:
> > > > 
> > > > gd
> > > > gd-devel
> > > > gd-progs 
> > > > 
> > > > installed
> > > > 
> > > > - bob
> > > > 
> > > > On Thu, 2005-05-12 at 16:32 -0700, Dimitar
> > Balinov
> > > > wrote:
> > > > > Hi, Bob! I have a problem, again! When I run
> > > > > ./configure everything seems OK, but when I
> > run
> > > > make
> > > > > there is a error: The output from make is:
> > > > > 
> > > > > make  all-recursive
> > > > > make[1]: Entering directory
> > > > > `/root/software/rlib-1.3.3'
> > > > > Making all in rpdf
> > > > > make[2]: Entering directory
> > > > > `/root/software/rlib-1.3.3/rpdf'
> > > > > source='rpdf.c' object='rpdf.lo' libtool=yes \
> > > > > depfile='.deps/rpdf.Plo'
> > > > tmpdepfile='.deps/rpdf.TPlo'
> > > > > \
> > > > > depmode=gcc3 /bin/sh ../depcomp \
> > > > > /bin/sh ../libtool --mode=compile gcc
> > > > -DHAVE_CONFIG_H
> > > > > -I. -I. -I..    -D_GNU_SOURCE
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include     -g -O2
> > -c -o
> > > > > rpdf.lo `test -f 'rpdf.c' || echo './'`rpdf.c
> > > > > mkdir .libs
> > > > >  gcc -DHAVE_CONFIG_H -I. -I. -I..
> > -D_GNU_SOURCE
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include -g -O2 -c
> > rpdf.c
> > > > -MT
> > > > > rpdf.lo -MD -MP -MF .deps/rpdf.TPlo 
> > -fPIC-DPIC -o
> > > > > .libs/rpdf.o
> > > > > /bin/sh ../libtool --mode=link gcc
> > -D_GNU_SOURCE
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include     -g -O2  
> > -o
> > > > > librpdf.la -rpath /usr/local/lib -version-info
> > > > 4:3:3 
> > > > > rpdf.lo  -L/opt/gnome/lib -lglib-2.0  
> > > > > -Wl,--export-dynamic -L/opt/gnome/lib
> > > > -lgmodule-2.0
> > > > > -ldl -lglib-2.0    -lm -lc
> > > > > gcc -shared  .libs/rpdf.o  -L/opt/gnome/lib
> > > > > /opt/gnome/lib/libgmodule-2.0.so -ldl
> > > > > /opt/gnome/lib/libglib-2.0.so -lm -lc 
> > > > > -Wl,--export-dynamic -Wl,-soname
> > -Wl,librpdf.so.1
> > > > -o
> > > > > .libs/librpdf.so.1.3.3
> > > > > (cd .libs && rm -f librpdf.so.1 && ln -s
> > > > > librpdf.so.1.3.3 librpdf.so.1)
> > > > > (cd .libs && rm -f librpdf.so && ln -s
> > > > > librpdf.so.1.3.3 librpdf.so)
> > > > > creating librpdf.la
> > > > > (cd .libs && rm -f librpdf.la && ln -s
> > > > ../librpdf.la
> > > > > librpdf.la)
> > > > > source='test.c' object='test.o' libtool=no \
> > > > > depfile='.deps/test.Po'
> > > > tmpdepfile='.deps/test.TPo' \
> > > > > depmode=gcc3 /bin/sh ../depcomp \
> > > > > gcc -DHAVE_CONFIG_H -I. -I. -I..   
> > -D_GNU_SOURCE
> > > > >
> > > >
> > >
> >
> -I/opt/gnome/include/glib-2.0-I/opt/gnome/lib/glib-2.0/include
> > > > >   -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include     -g -O2
> > -c
> > > > `test
> > > > > -f 'test.c' || echo './'`test.c
> > > > > /bin/sh ../libtool --mode=link gcc
> > -D_GNU_SOURCE
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include     -g -O2  
> > -o
> > > > test
> > > > >  test.o librpdf.la -lm -lm -lc
> > > > > gcc -D_GNU_SOURCE
> > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include -g -O2 -o
> > > > .libs/test
> > > > > test.o  ./.libs/librpdf.so -L/opt/gnome/lib
> > > > > /opt/gnome/lib/libgmodule-2.0.so -ldl
> > > > > /opt/gnome/lib/libglib-2.0.so -lm -lc
> > > > > creating test
> > > > > make[2]: Leaving directory
> > > > > `/root/software/rlib-1.3.3/rpdf'
> > > > > Making all in libsrc
> > > > > make[2]: Entering directory
> > > > > `/root/software/rlib-1.3.3/libsrc'
> > > > > source='parsexml.c' object='parsexml.lo'
> > > > libtool=yes \
> > > > > depfile='.deps/parsexml.Plo'
> > > > > tmpdepfile='.deps/parsexml.TPlo' \
> > > > > depmode=gcc3 /bin/sh ../depcomp \
> > > > > /bin/sh ../libtool --mode=compile gcc
> > > > -DHAVE_CONFIG_H
> > > > > -I. -I. -I..    -D_GNU_SOURCE -Wall
> > > > -Wchar-subscripts
> > > > > -I/usr/local/include/libxml2  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > > > > -I/usr/include/mysql -Os -pipe -march=pentium2
> > > > > -fomit-frame-pointer   -I/usr/include  
> > -I../rpdf
> > > > -g
> > > > > -O2 -c -o parsexml.lo `test -f 'parsexml.c' ||
> > > > echo
> > > > > './'`parsexml.c
> > > > > mkdir .libs
> > > > >  gcc -DHAVE_CONFIG_H -I. -I. -I..
> > -D_GNU_SOURCE
> > > > -Wall
> > > > > -Wchar-subscripts -I/usr/local/include/libxml2
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include
> > > > -I/usr/include/mysql
> > > > > -Os -pipe -march=pentium2 -fomit-frame-pointer
> > > > > -I/usr/include -I../rpdf -g -O2 -c parsexml.c
> > -MT
> > > > > parsexml.lo -MD -MP -MF .deps/parsexml.TPlo 
> > -fPIC
> > > > > -DPIC -o .libs/parsexml.o
> > > > > source='reportgen.c' object='reportgen.lo'
> > > > libtool=yes
> > > > > \
> > > > > depfile='.deps/reportgen.Plo'
> > > > > tmpdepfile='.deps/reportgen.TPlo' \
> > > > > depmode=gcc3 /bin/sh ../depcomp \
> > > > > /bin/sh ../libtool --mode=compile gcc
> > > > -DHAVE_CONFIG_H
> > > > > -I. -I. -I..    -D_GNU_SOURCE -Wall
> > > > -Wchar-subscripts
> > > > > -I/usr/local/include/libxml2  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > > > > -I/opt/gnome/include/glib-2.0
> > > > > -I/opt/gnome/lib/glib-2.0/include  
> > 
> === message truncated ===
> 
> 
> 		
> Discover Yahoo! 
> Get on-the-go sports scores, stock quotes, news and more. Check it out! 
> http://discover.yahoo.com/mobile.html