[Rlib-users] Can RLIB be installed without fastIO.

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Hi group,

I'm in the process of installing RLIB and I realized that I need fastIO for
the pdf generation.  The problem with Fast IO is that from what I read, it is
a commercial product and I need to purchase a liscence after the 30 day trial.
I have a couple of questions:

      1- Can I install RLIB without fastIO.  ( I do not want to generate PDF's
at all)
              -If so, what are the flags I need in the ./configure
      2- Is there another opensource of FastIO I can use instead ?
              -if so pls send install instructions

Best regards

farry
Bob Doan (bd...@si...) wrote:
>
> What distro are you running again?
>
> On Fri, 2004-05-21 at 16:47 +0000, Farryp Philippe-Auguste wrote:
> > I just tried and it built it.
> >
> > The problem  that I'm getting now is when I install rlib.
> >
> > Making install in libsrc
> > make[1]: Entering directory `/home/farryp/rlib-1.1.8/libsrc'
> > make[2]: Entering directory `/home/farryp/rlib-1.1.8/libsrc'
> > /bin/sh ../mkinstalldirs /usr/lib
> >  /bin/sh ../libtool --mode=install /usr/bin/install -c  libr.la
> > /usr/lib/libr.la
> > /usr/bin/install -c .libs/libr-1.1.8 /usr/lib/libr-1.1.8
> > (cd /usr/lib && rm -f libr && ln -s libr-1.1.8 libr)
> > /usr/bin/install -c .libs/libr.lai /usr/lib/libr.la
> > PATH="$PATH:/sbin" ldconfig -n /usr/lib
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use the `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - add LIBDIR to the `LD_RUN_PATH' environment variable
> >      during linking
> >    - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
> >    - have your system administrator add LIBDIR to `/etc/ld.so.conf'
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > /bin/sh ../mkinstalldirs /usr/include/rlib
> >  /usr/bin/install -c -m 644 rlib.h /usr/include/rlib/rlib.h
> >  /usr/bin/install -c -m 644 rlib_input.h /usr/include/rlib/rlib_input.h
> >  /usr/bin/install -c -m 644 containers.h /usr/include/rlib/containers.h
> >  /usr/bin/install -c -m 644 charencoder.h /usr/include/rlib/charencoder.h
> >  /usr/bin/install -c -m 644 datetime.h /usr/include/rlib/datetime.h
> >  /usr/bin/install -c -m 644 util.h /usr/include/rlib/util.h
> >  /usr/bin/install -c -m 644 value.h /usr/include/rlib/value.h
> > make[2]: Leaving directory `/home/farryp/rlib-1.1.8/libsrc'
> > make[1]: Leaving directory `/home/farryp/rlib-1.1.8/libsrc'
> > Making install in inputs
> > make[1]: Entering directory `/home/farryp/rlib-1.1.8/inputs'
> > Making install in odbc
> > make[2]: Entering directory `/home/farryp/rlib-1.1.8/inputs/odbc'
> > make[3]: Entering directory `/home/farryp/rlib-1.1.8/inputs/odbc'
> > /bin/sh ../../mkinstalldirs /usr/lib
> >  /bin/sh ../../libtool --mode=install /usr/bin/install -c  libr-odbc.la
> > /usr/lib/libr-odbc.la
> > /usr/bin/install -c .libs/libr-odbc-1.1.8 /usr/lib/libr-odbc-1.1.8
> > (cd /usr/lib && rm -f libr-odbc && ln -s libr-odbc-1.1.8 libr-odbc)
> > /usr/bin/install -c .libs/libr-odbc.lai /usr/lib/libr-odbc.la
> > PATH="$PATH:/sbin" ldconfig -n /usr/lib
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use the `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - add LIBDIR to the `LD_RUN_PATH' environment variable
> >      during linking
> >    - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
> >    - have your system administrator add LIBDIR to `/etc/ld.so.conf'
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > make[3]: Nothing to be done for `install-data-am'.
> > make[3]: Leaving directory `/home/farryp/rlib-1.1.8/inputs/odbc'
> > make[2]: Leaving directory `/home/farryp/rlib-1.1.8/inputs/odbc'
> > Making install in postgre
> > make[2]: Entering directory `/home/farryp/rlib-1.1.8/inputs/postgre'
> > make[3]: Entering directory `/home/farryp/rlib-1.1.8/inputs/postgre'
> > /bin/sh ../../mkinstalldirs /usr/lib
> >  /bin/sh ../../libtool --mode=install /usr/bin/install -c  libr-postgre.la
> > /usr/lib/libr-postgre.la
> > /usr/bin/install -c .libs/libr-postgre-1.1.8 /usr/lib/libr-postgre-1.1.8
> > (cd /usr/lib && rm -f libr-postgre && ln -s libr-postgre-1.1.8 libr-postgre)
> > /usr/bin/install -c .libs/libr-postgre.lai /usr/lib/libr-postgre.la
> > PATH="$PATH:/sbin" ldconfig -n /usr/lib
> > ----------------------------------------------------------------------
> > Libraries have been installed in:
> >    /usr/lib
> >
> > If you ever happen to want to link against installed libraries
> > in a given directory, LIBDIR, you must either use libtool, and
> > specify the full pathname of the library, or use the `-LLIBDIR'
> > flag during linking and do at least one of the following:
> >    - add LIBDIR to the `LD_LIBRARY_PATH' environment variable
> >      during execution
> >    - add LIBDIR to the `LD_RUN_PATH' environment variable
> >      during linking
> >    - use the `-Wl,--rpath -Wl,LIBDIR' linker flag
> >    - have your system administrator add LIBDIR to `/etc/ld.so.conf'
> >
> > See any operating system documentation about shared libraries for
> > more information, such as the ld(1) and ld.so(8) manual pages.
> > ----------------------------------------------------------------------
> > make[3]: Nothing to be done for `install-data-am'.
> > make[3]: Leaving directory `/home/farryp/rlib-1.1.8/inputs/postgre'
> > make[2]: Leaving directory `/home/farryp/rlib-1.1.8/inputs/postgre'
> > make[2]: Entering directory `/home/farryp/rlib-1.1.8/inputs'
> > make[3]: Entering directory `/home/farryp/rlib-1.1.8/inputs'
> > make[3]: Nothing to be done for `install-exec-am'.
> > make[3]: Nothing to be done for `install-data-am'.
> > make[3]: Leaving directory `/home/farryp/rlib-1.1.8/inputs'
> > make[2]: Leaving directory `/home/farryp/rlib-1.1.8/inputs'
> > make[1]: Leaving directory `/home/farryp/rlib-1.1.8/inputs'
> > Making install in bindings
> > make[1]: Entering directory `/home/farryp/rlib-1.1.8/bindings'
> > Making install in php
> > make[2]: Entering directory `/home/farryp/rlib-1.1.8/bindings/php'
> > make[3]: Entering directory `/home/farryp/rlib-1.1.8/bindings/php'
> > /bin/sh ../../mkinstalldirs /usr/lib/php4
> >  /bin/sh ../../libtool --mode=install /usr/bin/install -c  librlib.la
> > /usr/lib/php4/librlib.la
> > libtool: install: warning: relinking `librlib.la'
> > (cd /home/farryp/rlib-1.1.8/bindings/php; /bin/sh ../../libtool --mode=relink
> > gcc -g -O2 -o librlib.la -rpath /usr/lib/php4 -release 1.1.8 environment.lo
> > php.lo -L../../libsrc/ -lr -lxml2 -lpthread -lz -lm -lglib-2.0
> > -Wl,--export-dynamic -lgmodule-2.0 -ldl -lglib-2.0 -L/usr/lib -lpq -L/usr/lib
> > -lodbc -lcpdf -lcpdf -lm -lc )
> > gcc -shared  .libs/environment.o .libs/php.o  -L/home/farryp/rlib-1.1.8/libsrc
> > -L/usr/lib -lr -lxml2 -lpthread -lz -lgmodule-2.0 -ldl -lglib-2.0 -lpq -lodbc
> > -lcpdf -lm -lc  -Wl,--export-dynamic -Wl,-soname -Wl,librlib-1.1.8 -o
> > .libs/librlib-1.1.8
> > /usr/bin/ld: cannot find -lr
> > collect2: ld returned 1 exit status
> > libtool: install: error: relink `librlib.la' with the above command before
> > installing it
> > make[3]: *** [install-libLTLIBRARIES] Error 1
> > make[3]: Leaving directory `/home/farryp/rlib-1.1.8/bindings/php'
> > make[2]: *** [install-am] Error 2
> > make[2]: Leaving directory `/home/farryp/rlib-1.1.8/bindings/php'
> > make[1]: *** [install-recursive] Error 1
> > make[1]: Leaving directory `/home/farryp/rlib-1.1.8/bindings'
> > make: *** [install-recursive] Error 1
> >
> >
> > Thanks for your help
> >
> > Farry
> >
> >
> >
> > Bob Doan (bd...@si...) wrote:
> > >
> > > Yes.. but it seems (Or I just noticed) that if you want to use python
> > > (at least for know) your prefix should match what python's prefix is
> > > (I'm gonna have to add an option to specify the python prefix)
> > >
> > > So it would be best to compile rlib like:
> > >
> > > --prefix=/usr
> > >
> > > - bob
> > >
> > > On Fri, 2004-05-21 at 16:35 +0000, Farryp Philippe-Auguste wrote:
> > > > Yes I do.
> > > >
> > > > I was doing /usr/loca/rlib.
> > > >
> > > > >From the website, I thought that with the new version of rlib, it was okay to
> > > > set a path to .configure
> > > >
> > > > Best  regards
> > > >
> > > > Farry
> > > > Bob Doan (bd...@si...) wrote:
> > > > >
> > > > > Problem seems to be in the autoconf hell
> > > > >
> > > > > your PYTHON_PREFIX appears to be wrong
> > > > >
> > > > > however... looking @ the python.m4 it seems to pick up PYTHON_PREFIX
> > > > > from $prefix
> > > > >
> > > > > so the question is how are you configuring rlib.. are you doing a
> > > > > --prefix= ??
> > > > >
> > > > > - bob
> > > > >
> > > > > On Fri, 2004-05-21 at 16:02 +0000, Farryp Philippe-Auguste wrote:
> > > > > > the python.h is :
> > > > > > /usr/include/python2.2/Python.h
> > > > > >
> > > > > > I've also attached the full make output.
> > > > > >
> > > > > > Thanks
> > > > > >
> > > > > > Farry
> > > > > >
> > > > > > Bob Doan (bd...@si...) wrote:
> > > > > > >
> > > > > > > Ok.. Can you tell me where your Python.h is and can you send all of the
> > > > > > > make so I can see where rlib is looking for it
> > > > > > >
> > > > > > > - bob
> > > > > > >
> > > > > > > On Fri, 2004-05-21 at 14:49 +0000, Farryp Philippe-Auguste wrote:
> > > > > > > > Yes I do
> > > > > > > >
> > > > > > > >  rpm -qa | grep python
> > > > > > > > gnome-python2-canvas-1.99.14-5
> > > > > > > > gnome-python2-applet-1.99.14-5
> > > > > > > > python-docs-2.2.2-26
> > > > > > > > python-optik-1.4-2
> > > > > > > > rpm-python-4.2-0.69
> > > > > > > > libxml2-python-2.5.4-1
> > > > > > > > gnome-python2-gnomevfs-1.99.14-5
> > > > > > > > postgresql-python-7.3.2-3
> > > > > > > > python-tools-2.2.2-26
> > > > > > > > gnome-python2-bonobo-1.99.14-5
> > > > > > > > python-devel-2.2.2-26
> > > > > > > > gnome-python2-nautilus-1.99.14-5
> > > > > > > > MySQL-python-0.9.1-6
> > > > > > > > python-2.2.2-26
> > > > > > > > mod_python-3.0.1-3
> > > > > > > > gnome-python2-gtkhtml2-1.99.14-5
> > > > > > > > gnome-python2-1.99.14-5
> > > > > > > > libxslt-python-1.0.27-3
> > > > > > > > gnome-python2-gconf-1.99.14-5
> > > > > > > >
> > > > > > > > Bob Doan (bd...@si...) wrote:
> > > > > > > > >
> > > > > > > > > Do you have python-devel installed?
> > > > > > > > >
> > > > > > > > > On Fri, 2004-05-21 at 05:29 +0000, Farryp Philippe-Auguste wrote:
> > > > > > > > > > Hi group,
> > > > > > > > > >
> > > > > > > > > > I'm a new rlib user.  I was trying to get it to work on Fedora Core
> 1.0
> > > and
> > > > > > > > > > after installing libxml2-2.6.10-1 and libcpdf-2.02r1-0, I get the
> > > following
> > > > > > > > > > error.  Also, I wanted to know if we had to use any of the dtatbase
> stuff.
> > >  Is
> > > > > > > > > > is possible to just send the data directly to the report generator ? I
> > > didn't
> > > > > > > > > > want to have my schema exposed.
> > > > > > > > > >
> > > > > > > > > > I plan to use Python so ./configure --disable-python is not an option.
> > > > > > > > > >
> > > > > > > > > > Pls advise
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > python.c:13:20: Python.h: No such file or directory
> > > > > > > > > > python.c:259:20: Python.h: No such file or directory
> > > > > > > > > > python.c:328: error: syntax error before "PyObject"
> > > > > > > > > > python.c:328: warning: no semicolon at end of struct or union
> > > > > > > > > > python.c:329: error: syntax error before '*' token
> > > > > > > > > > python.c:331: error: syntax error before '}' token
> > > > > > > > > > python.c:331: warning: data definition has no type or storage class
> > > > > > > > > > python.c:334: error: syntax error before "PyObject_HEAD"
> > > > > > > > > > python.c:334: warning: no semicolon at end of struct or union
> > > > > > > > > > python.c:336: warning: data definition has no type or storage class
> > > > > > > > > > python.c:338: error: syntax error before '*' token
> > > > > > > > > > python.c:339: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `swig_varlink_repr':
> > > > > > > > > > python.c:340: error: `v' undeclared (first use in this function)
> > > > > > > > > > python.c:340: error: (Each undeclared identifier is reported only once
> > > > > > > > > > python.c:340: error: for each function it appears in.)
> > > > > > > > > > python.c:341: warning: return makes pointer from integer without a
> cast
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:345: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `swig_varlink_print':
> > > > > > > > > > python.c:346: error: `var' undeclared (first use in this function)
> > > > > > > > > > python.c:347: error: `flags' undeclared (first use in this function)
> > > > > > > > > > python.c:348: error: `fp' undeclared (first use in this function)
> > > > > > > > > > python.c:349: error: `v' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:357: error: syntax error before '*' token
> > > > > > > > > > python.c:358: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `swig_varlink_getattr':
> > > > > > > > > > python.c:359: error: `var' undeclared (first use in this function)
> > > > > > > > > > python.c:359: error: `v' undeclared (first use in this function)
> > > > > > > > > > python.c:361: error: `n' undeclared (first use in this function)
> > > > > > > > > > python.c:366: error: `PyExc_NameError' undeclared (first use in this
> > > function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:371: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `swig_varlink_setattr':
> > > > > > > > > > python.c:372: error: `var' undeclared (first use in this function)
> > > > > > > > > > python.c:372: error: `v' undeclared (first use in this function)
> > > > > > > > > > python.c:374: error: `n' undeclared (first use in this function)
> > > > > > > > > > python.c:375: error: `p' undeclared (first use in this function)
> > > > > > > > > > python.c:379: error: `PyExc_NameError' undeclared (first use in this
> > > function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:383: error: syntax error before "PyTypeObject"
> > > > > > > > > > python.c:385: error: initializer element is not constant
> > > > > > > > > > python.c:385: error: (near initialization for `varlinktype')
> > > > > > > > > > python.c:385: error: syntax error before numeric constant
> > > > > > > > > > python.c:386: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:386: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:387: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:387: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:388: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:388: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:389: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:389: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:390: error: `printfunc' undeclared here (not in a function)
> > > > > > > > > > python.c:390: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:390: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:390: error: syntax error before "swig_varlink_print"
> > > > > > > > > > python.c:391: error: `getattrfunc' undeclared here (not in a function)
> > > > > > > > > > python.c:391: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:391: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:391: error: syntax error before "swig_varlink_getattr"
> > > > > > > > > > python.c:392: error: `setattrfunc' undeclared here (not in a function)
> > > > > > > > > > python.c:392: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:392: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:392: error: syntax error before "swig_varlink_setattr"
> > > > > > > > > > python.c:393: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:393: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:394: error: `reprfunc' undeclared here (not in a function)
> > > > > > > > > > python.c:394: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:394: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:394: error: syntax error before "swig_varlink_repr"
> > > > > > > > > > python.c:395: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:395: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:396: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:396: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:397: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:397: warning: (near initialization for `varlinktype')
> > > > > > > > > > python.c:398: warning: data definition has no type or storage class
> > > > > > > > > > python.c:401: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `SWIG_Python_newvarlink':
> > > > > > > > > > python.c:403: error: `result' undeclared (first use in this function)
> > > > > > > > > > python.c:405: error: request for member `ob_type' in something not a
> > > structure
> > > > > > > > > > or union
> > > > > > > > > > python.c:405: error: `PyType_Type' undeclared (first use in this
> function)
> > > > > > > > > > python.c:409: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:409: error: syntax error before ')' token
> > > > > > > > > > python.c:410: error: syntax error before ')' token
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:415: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `SWIG_Python_ConvertPtr':
> > > > > > > > > > python.c:418: error: syntax error before '*' token
> > > > > > > > > > python.c:420: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:420: error: `pyobj' undeclared (first use in this function)
> > > > > > > > > > python.c:422: error: `obj' undeclared (first use in this function)
> > > > > > > > > > python.c:423: error: `Py_None' undeclared (first use in this function)
> > > > > > > > > > python.c:424: error: `ptr' undeclared (first use in this function)
> > > > > > > > > > python.c:446: error: `SWIG_this' undeclared (first use in this
> function)
> > > > > > > > > > python.c:457: warning: assignment makes pointer from integer without a
> > > cast
> > > > > > > > > > python.c:478: error: `ty' undeclared (first use in this function)
> > > > > > > > > > python.c:484: error: `flags' undeclared (first use in this function)
> > > > > > > > > > python.c:485: error: `zero' undeclared (first use in this function)
> > > > > > > > > > python.c:496: error: `PyExc_TypeError' undeclared (first use in this
> > > function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:506: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `SWIG_Python_NewPointerObj':
> > > > > > > > > > python.c:508: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:508: error: `robj' undeclared (first use in this function)
> > > > > > > > > > python.c:510: error: `Py_None' undeclared (first use in this function)
> > > > > > > > > > python.c:527: error: `inst' undeclared (first use in this function)
> > > > > > > > > > python.c:528: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c:530: error: syntax error before ')' token
> > > > > > > > > > python.c:534: error: `n' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:544: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `SWIG_Python_NewPackedObj':
> > > > > > > > > > python.c:552: warning: return makes pointer from integer without a
> cast
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:557: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `SWIG_Python_InstallConstants':
> > > > > > > > > > python.c:559: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:559: error: `obj' undeclared (first use in this function)
> > > > > > > > > > python.c:560: error: `constants' undeclared (first use in this
> function)
> > > > > > > > > > python.c:582: error: `d' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:619: error: syntax error before '*' token
> > > > > > > > > > python.c:619: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_init':
> > > > > > > > > > python.c:620: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:620: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:623: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:633: error: syntax error before '*' token
> > > > > > > > > > python.c:633: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_datasource_mysql':
> > > > > > > > > > python.c:634: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:634: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:642: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:644: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:655: error: syntax error before '*' token
> > > > > > > > > > python.c:655: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_datasource_postgre':
> > > > > > > > > > python.c:656: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:656: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:661: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:663: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:674: error: syntax error before '*' token
> > > > > > > > > > python.c:674: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_query_as':
> > > > > > > > > > python.c:675: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:675: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:681: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:683: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:694: error: syntax error before '*' token
> > > > > > > > > > python.c:694: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_report':
> > > > > > > > > > python.c:695: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:695: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:700: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:702: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:713: error: syntax error before '*' token
> > > > > > > > > > python.c:713: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_execute':
> > > > > > > > > > python.c:714: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:714: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:717: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:719: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:730: error: syntax error before '*' token
> > > > > > > > > > python.c:730: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_set_output_format_from_text':
> > > > > > > > > > python.c:731: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:731: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:735: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:737: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:748: error: syntax error before '*' token
> > > > > > > > > > python.c:748: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_spool':
> > > > > > > > > > python.c:749: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:749: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:752: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:754: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:765: error: syntax error before '*' token
> > > > > > > > > > python.c:765: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_free':
> > > > > > > > > > python.c:766: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:766: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:769: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:771: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:782: error: syntax error before '*' token
> > > > > > > > > > python.c:782: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_get_output':
> > > > > > > > > > python.c:783: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:783: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:786: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:788: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:799: error: syntax error before '*' token
> > > > > > > > > > python.c:799: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_get_output_length':
> > > > > > > > > > python.c:800: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:800: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:803: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:805: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:816: error: syntax error before '*' token
> > > > > > > > > > python.c:816: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_mysql_report':
> > > > > > > > > > python.c:817: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:817: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:827: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:837: error: syntax error before '*' token
> > > > > > > > > > python.c:837: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_postgre_report':
> > > > > > > > > > python.c:838: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:838: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:845: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:855: error: syntax error before '*' token
> > > > > > > > > > python.c:855: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_datasource_odbc':
> > > > > > > > > > python.c:856: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:856: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:863: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:865: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:876: error: syntax error before '*' token
> > > > > > > > > > python.c:876: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_resultset_follower':
> > > > > > > > > > python.c:877: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:877: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:882: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:884: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:895: error: syntax error before '*' token
> > > > > > > > > > python.c:895: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_add_parameter':
> > > > > > > > > > python.c:896: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:896: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:901: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:903: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:914: error: syntax error before '*' token
> > > > > > > > > > python.c:914: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_version':
> > > > > > > > > > python.c:915: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:915: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:918: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:928: error: syntax error before '*' token
> > > > > > > > > > python.c:928: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_set_output_encoding':
> > > > > > > > > > python.c:929: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:929: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:932: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:934: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c:938: error: `Py_None' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:945: error: syntax error before '*' token
> > > > > > > > > > python.c:945: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_set_report_output_encoding':
> > > > > > > > > > python.c:946: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:946: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:950: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:952: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c:956: error: `Py_None' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:963: error: syntax error before '*' token
> > > > > > > > > > python.c:963: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_set_pdf_font':
> > > > > > > > > > python.c:964: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:964: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:968: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:970: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c:974: error: `Py_None' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:981: error: syntax error before '*' token
> > > > > > > > > > python.c:981: error: syntax error before '*' token
> > > > > > > > > > python.c: In function `_wrap_rlib_set_pdf_font_directories':
> > > > > > > > > > python.c:982: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:982: error: `resultobj' undeclared (first use in this
> function)
> > > > > > > > > > python.c:986: error: `obj0' undeclared (first use in this function)
> > > > > > > > > > python.c:988: error: `args' undeclared (first use in this function)
> > > > > > > > > > python.c:992: error: `Py_None' undeclared (first use in this function)
> > > > > > > > > > python.c: At top level:
> > > > > > > > > > python.c:999: error: syntax error before "SwigMethods"
> > > > > > > > > > python.c:1000: warning: braces around scalar initializer
> > > > > > > > > > python.c:1000: warning: (near initialization for `SwigMethods[0]')
> > > > > > > > > > python.c:1000: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1000: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1000: warning: (near initialization for `SwigMethods[0]')
> > > > > > > > > > python.c:1000: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1000: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1000: warning: (near initialization for `SwigMethods[0]')
> > > > > > > > > > python.c:1001: warning: braces around scalar initializer
> > > > > > > > > > python.c:1001: warning: (near initialization for `SwigMethods[1]')
> > > > > > > > > > python.c:1001: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1001: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1001: warning: (near initialization for `SwigMethods[1]')
> > > > > > > > > > python.c:1001: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1001: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1001: warning: (near initialization for `SwigMethods[1]')
> > > > > > > > > > python.c:1002: warning: braces around scalar initializer
> > > > > > > > > > python.c:1002: warning: (near initialization for `SwigMethods[2]')
> > > > > > > > > > python.c:1002: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1002: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1002: warning: (near initialization for `SwigMethods[2]')
> > > > > > > > > > python.c:1002: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1002: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1002: warning: (near initialization for `SwigMethods[2]')
> > > > > > > > > > python.c:1003: warning: braces around scalar initializer
> > > > > > > > > > python.c:1003: warning: (near initialization for `SwigMethods[3]')
> > > > > > > > > > python.c:1003: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1003: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1003: warning: (near initialization for `SwigMethods[3]')
> > > > > > > > > > python.c:1003: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1003: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1003: warning: (near initialization for `SwigMethods[3]')
> > > > > > > > > > python.c:1004: warning: braces around scalar initializer
> > > > > > > > > > python.c:1004: warning: (near initialization for `SwigMethods[4]')
> > > > > > > > > > python.c:1004: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1004: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1004: warning: (near initialization for `SwigMethods[4]')
> > > > > > > > > > python.c:1004: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1004: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1004: warning: (near initialization for `SwigMethods[4]')
> > > > > > > > > > python.c:1005: warning: braces around scalar initializer
> > > > > > > > > > python.c:1005: warning: (near initialization for `SwigMethods[5]')
> > > > > > > > > > python.c:1005: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1005: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1005: warning: (near initialization for `SwigMethods[5]')
> > > > > > > > > > python.c:1005: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1005: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1005: warning: (near initialization for `SwigMethods[5]')
> > > > > > > > > > python.c:1006: warning: braces around scalar initializer
> > > > > > > > > > python.c:1006: warning: (near initialization for `SwigMethods[6]')
> > > > > > > > > > python.c:1006: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1006: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1006: warning: (near initialization for `SwigMethods[6]')
> > > > > > > > > > python.c:1006: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1006: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1006: warning: (near initialization for `SwigMethods[6]')
> > > > > > > > > > python.c:1007: warning: braces around scalar initializer
> > > > > > > > > > python.c:1007: warning: (near initialization for `SwigMethods[7]')
> > > > > > > > > > python.c:1007: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1007: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1007: warning: (near initialization for `SwigMethods[7]')
> > > > > > > > > > python.c:1007: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1007: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1007: warning: (near initialization for `SwigMethods[7]')
> > > > > > > > > > python.c:1008: warning: braces around scalar initializer
> > > > > > > > > > python.c:1008: warning: (near initialization for `SwigMethods[8]')
> > > > > > > > > > python.c:1008: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1008: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1008: warning: (near initialization for `SwigMethods[8]')
> > > > > > > > > > python.c:1008: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1008: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1008: warning: (near initialization for `SwigMethods[8]')
> > > > > > > > > > python.c:1009: warning: braces around scalar initializer
> > > > > > > > > > python.c:1009: warning: (near initialization for `SwigMethods[9]')
> > > > > > > > > > python.c:1009: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1009: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1009: warning: (near initialization for `SwigMethods[9]')
> > > > > > > > > > python.c:1009: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1009: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1009: warning: (near initialization for `SwigMethods[9]')
> > > > > > > > > > python.c:1010: warning: braces around scalar initializer
> > > > > > > > > > python.c:1010: warning: (near initialization for `SwigMethods[10]')
> > > > > > > > > > python.c:1010: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1010: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1010: warning: (near initialization for `SwigMethods[10]')
> > > > > > > > > > python.c:1010: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1010: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1010: warning: (near initialization for `SwigMethods[10]')
> > > > > > > > > > python.c:1011: warning: braces around scalar initializer
> > > > > > > > > > python.c:1011: warning: (near initialization for `SwigMethods[11]')
> > > > > > > > > > python.c:1011: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1011: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1011: warning: (near initialization for `SwigMethods[11]')
> > > > > > > > > > python.c:1011: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1011: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1011: warning: (near initialization for `SwigMethods[11]')
> > > > > > > > > > python.c:1012: warning: braces around scalar initializer
> > > > > > > > > > python.c:1012: warning: (near initialization for `SwigMethods[12]')
> > > > > > > > > > python.c:1012: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1012: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1012: warning: (near initialization for `SwigMethods[12]')
> > > > > > > > > > python.c:1012: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1012: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1012: warning: (near initialization for `SwigMethods[12]')
> > > > > > > > > > python.c:1013: warning: braces around scalar initializer
> > > > > > > > > > python.c:1013: warning: (near initialization for `SwigMethods[13]')
> > > > > > > > > > python.c:1013: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1013: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1013: warning: (near initialization for `SwigMethods[13]')
> > > > > > > > > > python.c:1013: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1013: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1013: warning: (near initialization for `SwigMethods[13]')
> > > > > > > > > > python.c:1014: warning: braces around scalar initializer
> > > > > > > > > > python.c:1014: warning: (near initialization for `SwigMethods[14]')
> > > > > > > > > > python.c:1014: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1014: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1014: warning: (near initialization for `SwigMethods[14]')
> > > > > > > > > > python.c:1014: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1014: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1014: warning: (near initialization for `SwigMethods[14]')
> > > > > > > > > > python.c:1015: warning: braces around scalar initializer
> > > > > > > > > > python.c:1015: warning: (near initialization for `SwigMethods[15]')
> > > > > > > > > > python.c:1015: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1015: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1015: warning: (near initialization for `SwigMethods[15]')
> > > > > > > > > > python.c:1015: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1015: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1015: warning: (near initialization for `SwigMethods[15]')
> > > > > > > > > > python.c:1016: warning: braces around scalar initializer
> > > > > > > > > > python.c:1016: warning: (near initialization for `SwigMethods[16]')
> > > > > > > > > > python.c:1016: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1016: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1016: warning: (near initialization for `SwigMethods[16]')
> > > > > > > > > > python.c:1016: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1016: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1016: warning: (near initialization for `SwigMethods[16]')
> > > > > > > > > > python.c:1017: warning: braces around scalar initializer
> > > > > > > > > > python.c:1017: warning: (near initialization for `SwigMethods[17]')
> > > > > > > > > > python.c:1017: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1017: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1017: warning: (near initialization for `SwigMethods[17]')
> > > > > > > > > > python.c:1017: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1017: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1017: warning: (near initialization for `SwigMethods[17]')
> > > > > > > > > > python.c:1018: warning: braces around scalar initializer
> > > > > > > > > > python.c:1018: warning: (near initialization for `SwigMethods[18]')
> > > > > > > > > > python.c:1018: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1018: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1018: warning: (near initialization for `SwigMethods[18]')
> > > > > > > > > > python.c:1018: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1018: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1018: warning: (near initialization for `SwigMethods[18]')
> > > > > > > > > > python.c:1019: warning: braces around scalar initializer
> > > > > > > > > > python.c:1019: warning: (near initialization for `SwigMethods[19]')
> > > > > > > > > > python.c:1019: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1019: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1019: warning: (near initialization for `SwigMethods[19]')
> > > > > > > > > > python.c:1019: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1019: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1019: warning: (near initialization for `SwigMethods[19]')
> > > > > > > > > > python.c:1020: warning: braces around scalar initializer
> > > > > > > > > > python.c:1020: warning: (near initialization for `SwigMethods[20]')
> > > > > > > > > > python.c:1020: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1020: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1020: warning: (near initialization for `SwigMethods[20]')
> > > > > > > > > > python.c:1020: error: `METH_VARARGS' undeclared here (not in a
> function)
> > > > > > > > > > python.c:1020: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1020: warning: (near initialization for `SwigMethods[20]')
> > > > > > > > > > python.c:1021: warning: braces around scalar initializer
> > > > > > > > > > python.c:1021: warning: (near initialization for `SwigMethods[21]')
> > > > > > > > > > python.c:1021: warning: initialization makes integer from pointer
> without
> > > a
> > > > > > > > > > cast
> > > > > > > > > > python.c:1021: warning: excess elements in scalar initializer
> > > > > > > > > > python.c:1021: warning: (near initialization for `SwigMethods[21]')
> > > > > > > > > > python.c:1022: warning: data definition has no type or storage class
> > > > > > > > > > python.c: In function `init_librlib':
> > > > > > > > > > python.c:1048: error: syntax error before '*' token
> > > > > > > > > > python.c:1050: error: `PyObject' undeclared (first use in this
> function)
> > > > > > > > > > python.c:1050: error: `m' undeclared (first use in this function)
> > > > > > > > > > python.c:1050: error: `d' undeclared (first use in this function)
> > > > > > > > > > python.c:1052: error: `SWIG_globals' undeclared (first use in this
> > > function)
> > > > > > > > > > make[3]: *** [python.lo] Error 1
> > > > > > > > > > make[3]: Leaving directory `/home/farryp/rlib-1.1.8/bindings/python'
> > > > > > > > > > make[2]: *** [all-recursive] Error 1
> > > > > > > > > > make[2]: Leaving directory `/home/farryp/rlib-1.1.8/bindings'
> > > > > > > > > > make[1]: *** [all-recursive] Error 1
> > > > > > > > > > make[1]: Leaving directory `/home/farryp/rlib-1.1.8'
> > > > > > > > > > make: *** [all] Error 2
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > -------------------------------------------------------
> > > > > > > > > > This SF.Net email is sponsored by: Oracle 10g
> > > > > > > > > > Get certified on the hottest thing ever to hit the market... Oracle
> 10g.
> > > > > > > > > > Take an Oracle 10g class now, and we'll give you the exam FREE.
> > > > > > > > > > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
> > > > > > > > > > _______________________________________________
> > > > > > > > > > Rlib-users mailing list
> > > > > > > > > > Rli...@li...
> > > > > > > > > > https://lists.sourceforge.net/lists/listinfo/rlib-users
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > -------------------------------------------------------
> > > > > > > > This SF.Net email is sponsored by: Oracle 10g
> > > > > > > > Get certified on the hottest thing ever to hit the market... Oracle 10g.
> > > > > > > > Take an Oracle 10g class now, and we'll give you the exam FREE.
> > > > > > > > http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
> > > > > > > > _______________________________________________
> > > > > > > > Rlib-users mailing list
> > > > > > > > Rli...@li...
> > > > > > > > https://lists.sourceforge.net/lists/listinfo/rlib-users
> > > > > > >
> > > > > > >
> > > > >
> > > > >
> > >
> > >
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by: Oracle 10g
> Get certified on the hottest thing ever to hit the market... Oracle 10g.
> Take an Oracle 10g class now, and we'll give you the exam FREE.
> http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click
> _______________________________________________
> Rlib-users mailing list
> Rli...@li...
> https://lists.sourceforge.net/lists/listinfo/rlib-users
>