I am trying to restore a backup I made using Rescuezilla. The backup looked to run fine, but when I do the restore procedure it starts but then stops at 4.11%. The transfer speed drops down while the timer keeps running. I tried 3 different hard drives to restore to and the same thing happens ever time.
======================================================================
The information contained in this e-mail, including all of its attachments, is
confidential and proprietary information of IPG Photonics and its affiliates and
intended only for the use of the individual or entity named above. If the
reader of this message is not the intended recipient, or the employee or agent
responsible to deliver it to the intended recipient, you are hereby notified
that any dissemination, distribution or copying of this communication is strictly
prohibited.
If you have received this communication in error, please immediately notify the
sender by telephone or e-mail, and destroy this communication and all copies.
Thank you.
This Email has been scanned for all viruses by IPG Photonics Email Scanning Services.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Does your image work when tested using the 'Verify' feature?
Rescuezilla makes images and restores images using the partclone utility. Chances are it's that application that may be having an issue with the image, especially if the transfer speed is dropping.
It may be worth trying to restore using the prerelease (2023-11-26) as it has a more recent version of partclone, which may have fixed some bugs.
It's also possible it's the source disk that's the problem, potentially. I've heard of similar issues when users use eg, NFS network shared filesystems that don't occur when they use the image from a different location.
EDIT: Oh, another thing you can try is to restore with the 'Rescue' option enabled.
Last edit: Rescuezilla 2024-03-07
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I am trying to restore a backup I made using Rescuezilla. The backup looked to run fine, but when I do the restore procedure it starts but then stops at 4.11%. The transfer speed drops down while the timer keeps running. I tried 3 different hard drives to restore to and the same thing happens ever time.
======================================================================
The information contained in this e-mail, including all of its attachments, is
confidential and proprietary information of IPG Photonics and its affiliates and
intended only for the use of the individual or entity named above. If the
reader of this message is not the intended recipient, or the employee or agent
responsible to deliver it to the intended recipient, you are hereby notified
that any dissemination, distribution or copying of this communication is strictly
prohibited.
If you have received this communication in error, please immediately notify the
sender by telephone or e-mail, and destroy this communication and all copies.
Thank you.
This Email has been scanned for all viruses by IPG Photonics Email Scanning Services.
Does your image work when tested using the 'Verify' feature?
Rescuezilla makes images and restores images using the
partcloneutility. Chances are it's that application that may be having an issue with the image, especially if the transfer speed is dropping.It may be worth trying to restore using the prerelease (2023-11-26) as it has a more recent version of
partclone, which may have fixed some bugs.It's also possible it's the source disk that's the problem, potentially. I've heard of similar issues when users use eg, NFS network shared filesystems that don't occur when they use the image from a different location.
EDIT: Oh, another thing you can try is to restore with the 'Rescue' option enabled.
Last edit: Rescuezilla 2024-03-07