Menu
▾
▴
[reprap-commits] SF.net SVN: reprap:[4142] trunk/mendel/mechanics/solid-models/ cartesian-robot-m4/printed-parts
|
From: <rhy...@us...> - 2011-06-22 18:59:36
|
Revision: 4142
http://reprap.svn.sourceforge.net/reprap/?rev=4142&view=rev
Author: rhys-jones
Date: 2011-06-22 18:59:30 +0000 (Wed, 22 Jun 2011)
Log Message:
-----------
Fixing some errors in the x caarriage STL. STL's created using Viks openscad release rather than the original solid edge model.
Modified Paths:
--------------
trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-carriage-lower_1off.stl
trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-carriage-upper_1off.stl
Modified: trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-carriage-lower_1off.stl
===================================================================
(Binary files differ)
Modified: trunk/mendel/mechanics/solid-models/cartesian-robot-m4/printed-parts/x-carriage-upper_1off.stl
===================================================================
(Binary files differ)
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|