Thread: [Redbutton-devel] Problems using channels.conf
Brought to you by:
skilvington
Menu
▾
▴
redbutton-devel
|
From: Mario R. <mar...@go...> - 2007-01-21 00:01:34
|
Hi, I've had problems since the introduction of the new handling of the file channels.conf. This is the output of rb-download [andrea@thinkpad tmp]$ rb-download -f /home/andrea/.tzap/channels.conf Channels on this mutiplex: ID Channel == ======= 8261 ITV1 8294 ITV3 8325 ITV2 8353 ITV4 8358 CITV 8384 Channel 4 8390 SETANTA SPORTS 8442 More 4 8448 E4 8452 Film4+1 8517 Teletext 8643 Teletext Cars 8768 Teletext on 4 8771 RadioMusicShop 8772 Heart [andrea@thinkpad tmp]$ rb-download -v -f /home/andrea/.tzap/channels.conf 8261 Trying to open /home/andrea/.tzap/channels.conf Searching channels.conf for service_id 8261 ITV1:481833330:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:520:521:8261 Adding PID 2100 to filter Unable to find Carousel Descriptor in PMT If I try the release with tag 20070108 I get everything ok. When I use redbutton, I always have tzap running in an other console tuning one channel of the multiplex I'm interested. In this case: [andrea@thinkpad ~]$ tzap "ITV1" using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' reading channels from file '/home/andrea/.tzap/channels.conf' tuning to 481833330 Hz video pid 0x0208, audio pid 0x0209 status 1f | signal 90b3 | snr 0000 | ber 001fffff | unc 00000000 | FE_HAS_LOCK status 1f | signal 90af | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK I've tried without -f channels.conf but it does not like it. Am I doing the right things? Cheers |
|
From: Mario R. <mar...@go...> - 2007-01-21 00:31:04
|
This is a more detailed output [andrea@thinkpad tmp]$ rb-download -vv -f /home/andrea/.tzap/channels.conf 8261 Trying to open /home/andrea/.tzap/channels.conf Getting frontend info Searching channels.conf for service_id 8261 ITV1:481833330:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:520:521:8261 Current frequency 481833330; needed 481833330 PMT PID: 256 PID=520 component_tag=0 PID=521 component_tag=138 PID=522 component_tag=148 PID=523 descriptor=0x59 0x00000000 65 6e 67 10 00 02 00 02 eng..... PID=2100 descriptor=0xe 0x00000000 c0 45 d9 .E. PID=2100 carousel_id=4 PID=2100 boot_priority_hint=0 PID=2100 component_tag=39 Set boot_pid=2100 carousel_id=4 Adding PID 2100 to filter PID=2101 descriptor=0xe 0x00000000 c0 45 d9 .E. PID=2101 component_tag=40 PID=2302 descriptor=0xe 0x00000000 c0 45 d9 .E. PID=2302 component_tag=41 PID=2301 descriptor=0xe 0x00000000 c0 45 d9 .E. PID=2301 component_tag=42 Unable to find Carousel Descriptor in PMT |
|
From: Simon K. <s.k...@er...> - 2007-01-22 09:48:45
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I can't understand why this is happening - the "Unable to find
Carousel Descriptor in PMT" error is triggered if no boot/carousel
info is found - but the log here shows that we do find it "Set
boot_pid=2100 carousel_id=4"
can you add some lines to print the value of "_car.npids" at
various points in the find_mheg function in find_mheg.c - eg add
something like:
printf("npids=%u\n", _car.npids);
around line 187 in find_mheg.c
what happens if you don't run tzap at the same time?
some of the svn changes lately mean you need to do a
"make clean" before compiling - can you try that?
SK.
Mario Rossi wrote:
> This is a more detailed output
>
> [andrea@thinkpad tmp]$ rb-download -vv -f /home/andrea/.tzap/channels.conf 8261
> Trying to open /home/andrea/.tzap/channels.conf
> Getting frontend info
> Searching channels.conf for service_id 8261
> ITV1:481833330:INVERSION_AUTO:BANDWIDTH_8_MHZ:FEC_2_3:FEC_1_2:QAM_64:TRANSMISSION_MODE_2K:GUARD_INTERVAL_1_32:HIERARCHY_NONE:520:521:8261
> Current frequency 481833330; needed 481833330
> PMT PID: 256
> PID=520 component_tag=0
> PID=521 component_tag=138
> PID=522 component_tag=148
> PID=523 descriptor=0x59
> 0x00000000 65 6e 67 10 00 02 00 02 eng.....
> PID=2100 descriptor=0xe
> 0x00000000 c0 45 d9 .E.
> PID=2100 carousel_id=4
> PID=2100 boot_priority_hint=0
> PID=2100 component_tag=39
> Set boot_pid=2100 carousel_id=4
> Adding PID 2100 to filter
> PID=2101 descriptor=0xe
> 0x00000000 c0 45 d9 .E.
> PID=2101 component_tag=40
> PID=2302 descriptor=0xe
> 0x00000000 c0 45 d9 .E.
> PID=2302 component_tag=41
> PID=2301 descriptor=0xe
> 0x00000000 c0 45 d9 .E.
> PID=2301 component_tag=42
> Unable to find Carousel Descriptor in PMT
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Redbutton-devel mailing list
> Red...@li...
> https://lists.sourceforge.net/lists/listinfo/redbutton-devel
>
>
- --
Simon Kilvington
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFtIhrmt9ZifioJSwRAnYJAJ0e5PdpY9iyJFMZ562rOe9VL/lOmACfc3Xl
YIId4z6eyF0QdRnh+imiIXc=
=bnnG
-----END PGP SIGNATURE-----
|
|
From: Mario R. <mar...@go...> - 2007-01-22 12:46:56
|
Hi,
I must have made a mistake compiling since it works now.
I still have problems with the video output I had some times ago.
I run redbutton like this:
rb-download 4415
and in another console
rb-browser -o null services/4415
I get a lot of warnings like that, and rb becomes very slow in responding.
[mpeg2video @ 0xb7dfdcc4]ac-tex damaged at 1 24
[mpeg2video @ 0xb7dfdcc4]00 motion_type at 35 25
[mpeg2video @ 0xb7dfdcc4]00 motion_type at 8 26
[mpeg2video @ 0xb7dfdcc4]invalid cbp at 7 27
[mpeg2video @ 0xb7dfdcc4]00 motion_type at 30 28
[mpeg2video @ 0xb7dfdcc4]invalid cbp at 12 29
[mpeg2video @ 0xb7dfdcc4]slice mismatch
and some about mp3
[mp3 @ 0xb7dfdcc4]incorrect frame size
And finally, I get again the behaviour when a click on the X on the
top right of the window does not close it, but it freezes.
I thought that "-o null" and not using "-l" in the rb-download meant
not to bother with the underlying vide but I must be wrong: how can I
completely disable the video and audio output?
Here is a gdb backtrace when it freezes:
I've run it like "rb-browser -o null services/4415/
Thread 2 (Thread -1234822240 (LWP 2304)):
#0 0x4dcba004 in getenv () from /lib/libc.so.6
#1 0x4146178b in snd_strerror () from /usr/lib/libasound.so.2
#2 0x4147bbee in snd_pcm_writei () from /usr/lib/libasound.so.2
#3 0x08055ae7 in MHEGAudioOutput_addSamples (a=0xb6661354,
samples=0xb51b601c, nbytes=4608) at MHEGAudioOutput.c:118
#4 0x08054b98 in audio_thread (arg=0x80d50b4) at MHEGStreamPlayer.c:743
#5 0x4dfe7433 in start_thread () from /lib/libpthread.so.0
#6 0x4dd58a1e in clone () from /lib/libc.so.6
Thread 1 (Thread -1218033984 (LWP 2300)):
#0 0xb7f58410 in ?? ()
#1 0xbf9fed78 in ?? ()
#2 0x00000900 in ?? ()
#3 0x00000000 in ?? ()
This behaviour is quite random. Could it be related to the fact that I
update ffmpeg quite often?
On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi,
>
> I can't understand why this is happening - the "Unable to find
> Carousel Descriptor in PMT" error is triggered if no boot/carousel
> info is found - but the log here shows that we do find it "Set
> boot_pid=2100 carousel_id=4"
>
> can you add some lines to print the value of "_car.npids" at
> various points in the find_mheg function in find_mheg.c - eg add
> something like:
>
> printf("npids=%u\n", _car.npids);
>
> around line 187 in find_mheg.c
>
> what happens if you don't run tzap at the same time?
>
> some of the svn changes lately mean you need to do a
> "make clean" before compiling - can you try that?
>
> SK.
>
> Mario Rossi wrote:
|
|
From: Simon K. <s.k...@er...> - 2007-01-22 13:40:56
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
glad the problem sorted itself out!
the warnings you are getting are from ffmpeg - generally it
means the mpeg stream is corrupt or not all of it is getting through
to the decoder in rb-browser
the only way to totally disable audio and video is to not
run rb-download - run it for a bit to get the files downloaded onto
the file system, then stop it and start "rb-browser services/XXX"
(I'm going to make "-o null" disable audio/video, but that's not
done yet)
once I've got the retuning stuff finished I'm going to start
looking at different video output methods and making rb-browser more
responsive when there are problems with the video...
Mario Rossi wrote:
> Hi,
>
> I must have made a mistake compiling since it works now.
>
> I still have problems with the video output I had some times ago.
>
> I run redbutton like this:
>
> rb-download 4415
>
> and in another console
>
> rb-browser -o null services/4415
>
> I get a lot of warnings like that, and rb becomes very slow in responding.
>
> [mpeg2video @ 0xb7dfdcc4]ac-tex damaged at 1 24
> [mpeg2video @ 0xb7dfdcc4]00 motion_type at 35 25
> [mpeg2video @ 0xb7dfdcc4]00 motion_type at 8 26
> [mpeg2video @ 0xb7dfdcc4]invalid cbp at 7 27
> [mpeg2video @ 0xb7dfdcc4]00 motion_type at 30 28
> [mpeg2video @ 0xb7dfdcc4]invalid cbp at 12 29
> [mpeg2video @ 0xb7dfdcc4]slice mismatch
>
> and some about mp3
>
> [mp3 @ 0xb7dfdcc4]incorrect frame size
>
> And finally, I get again the behaviour when a click on the X on the
> top right of the window does not close it, but it freezes.
> I thought that "-o null" and not using "-l" in the rb-download meant
> not to bother with the underlying vide but I must be wrong: how can I
> completely disable the video and audio output?
>
> Here is a gdb backtrace when it freezes:
>
> I've run it like "rb-browser -o null services/4415/
>
> Thread 2 (Thread -1234822240 (LWP 2304)):
> #0 0x4dcba004 in getenv () from /lib/libc.so.6
> #1 0x4146178b in snd_strerror () from /usr/lib/libasound.so.2
> #2 0x4147bbee in snd_pcm_writei () from /usr/lib/libasound.so.2
> #3 0x08055ae7 in MHEGAudioOutput_addSamples (a=0xb6661354,
> samples=0xb51b601c, nbytes=4608) at MHEGAudioOutput.c:118
> #4 0x08054b98 in audio_thread (arg=0x80d50b4) at MHEGStreamPlayer.c:743
> #5 0x4dfe7433 in start_thread () from /lib/libpthread.so.0
> #6 0x4dd58a1e in clone () from /lib/libc.so.6
>
> Thread 1 (Thread -1218033984 (LWP 2300)):
> #0 0xb7f58410 in ?? ()
> #1 0xbf9fed78 in ?? ()
> #2 0x00000900 in ?? ()
> #3 0x00000000 in ?? ()
>
> This behaviour is quite random. Could it be related to the fact that I
> update ffmpeg quite often?
>
> On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
>
>>-----BEGIN PGP SIGNED MESSAGE-----
>>Hash: SHA1
>>
>>Hi,
>>
>> I can't understand why this is happening - the "Unable to find
>>Carousel Descriptor in PMT" error is triggered if no boot/carousel
>>info is found - but the log here shows that we do find it "Set
>>boot_pid=2100 carousel_id=4"
>>
>> can you add some lines to print the value of "_car.npids" at
>>various points in the find_mheg function in find_mheg.c - eg add
>>something like:
>>
>>printf("npids=%u\n", _car.npids);
>>
>> around line 187 in find_mheg.c
>>
>> what happens if you don't run tzap at the same time?
>>
>> some of the svn changes lately mean you need to do a
>>"make clean" before compiling - can you try that?
>>
>>SK.
>>
>>Mario Rossi wrote:
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Redbutton-devel mailing list
> Red...@li...
> https://lists.sourceforge.net/lists/listinfo/redbutton-devel
>
>
- --
Simon Kilvington
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFtL7Nmt9ZifioJSwRAjruAJ9NWGQ0sGNR5ExZrQ7O3ikfLA1+/QCggcRp
Zh268wMAgTY/GiN5kaMMo1w=
=HeiT
-----END PGP SIGNATURE-----
|
|
From: Mario R. <mar...@go...> - 2007-01-22 14:27:57
|
I will try it this way, but I guess I would loose the new feature of retuning.
Thanks
On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> Hi,
>
> glad the problem sorted itself out!
>
> the warnings you are getting are from ffmpeg - generally it
> means the mpeg stream is corrupt or not all of it is getting through
> to the decoder in rb-browser
>
> the only way to totally disable audio and video is to not
> run rb-download - run it for a bit to get the files downloaded onto
> the file system, then stop it and start "rb-browser services/XXX"
> (I'm going to make "-o null" disable audio/video, but that's not
> done yet)
>
> once I've got the retuning stuff finished I'm going to start
> looking at different video output methods and making rb-browser more
> responsive when there are problems with the video...
>
> Mario Rossi wrote:
> > Hi,
> >
> > I must have made a mistake compiling since it works now.
> >
> > I still have problems with the video output I had some times ago.
> >
> > I run redbutton like this:
> >
> > rb-download 4415
> >
> > and in another console
> >
> > rb-browser -o null services/4415
> >
> > I get a lot of warnings like that, and rb becomes very slow in responding.
> >
> > [mpeg2video @ 0xb7dfdcc4]ac-tex damaged at 1 24
> > [mpeg2video @ 0xb7dfdcc4]00 motion_type at 35 25
> > [mpeg2video @ 0xb7dfdcc4]00 motion_type at 8 26
> > [mpeg2video @ 0xb7dfdcc4]invalid cbp at 7 27
> > [mpeg2video @ 0xb7dfdcc4]00 motion_type at 30 28
> > [mpeg2video @ 0xb7dfdcc4]invalid cbp at 12 29
> > [mpeg2video @ 0xb7dfdcc4]slice mismatch
> >
> > and some about mp3
> >
> > [mp3 @ 0xb7dfdcc4]incorrect frame size
> >
> > And finally, I get again the behaviour when a click on the X on the
> > top right of the window does not close it, but it freezes.
> > I thought that "-o null" and not using "-l" in the rb-download meant
> > not to bother with the underlying vide but I must be wrong: how can I
> > completely disable the video and audio output?
> >
> > Here is a gdb backtrace when it freezes:
> >
> > I've run it like "rb-browser -o null services/4415/
> >
> > Thread 2 (Thread -1234822240 (LWP 2304)):
> > #0 0x4dcba004 in getenv () from /lib/libc.so.6
> > #1 0x4146178b in snd_strerror () from /usr/lib/libasound.so.2
> > #2 0x4147bbee in snd_pcm_writei () from /usr/lib/libasound.so.2
> > #3 0x08055ae7 in MHEGAudioOutput_addSamples (a=0xb6661354,
> > samples=0xb51b601c, nbytes=4608) at MHEGAudioOutput.c:118
> > #4 0x08054b98 in audio_thread (arg=0x80d50b4) at MHEGStreamPlayer.c:743
> > #5 0x4dfe7433 in start_thread () from /lib/libpthread.so.0
> > #6 0x4dd58a1e in clone () from /lib/libc.so.6
> >
> > Thread 1 (Thread -1218033984 (LWP 2300)):
> > #0 0xb7f58410 in ?? ()
> > #1 0xbf9fed78 in ?? ()
> > #2 0x00000900 in ?? ()
> > #3 0x00000000 in ?? ()
> >
> > This behaviour is quite random. Could it be related to the fact that I
> > update ffmpeg quite often?
> >
> > On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
> >
> >>-----BEGIN PGP SIGNED MESSAGE-----
> >>Hash: SHA1
> >>
> >>Hi,
> >>
> >> I can't understand why this is happening - the "Unable to find
> >>Carousel Descriptor in PMT" error is triggered if no boot/carousel
> >>info is found - but the log here shows that we do find it "Set
> >>boot_pid=2100 carousel_id=4"
> >>
> >> can you add some lines to print the value of "_car.npids" at
> >>various points in the find_mheg function in find_mheg.c - eg add
> >>something like:
> >>
> >>printf("npids=%u\n", _car.npids);
> >>
> >> around line 187 in find_mheg.c
> >>
> >> what happens if you don't run tzap at the same time?
> >>
> >> some of the svn changes lately mean you need to do a
> >>"make clean" before compiling - can you try that?
> >>
> >>SK.
> >>
> >>Mario Rossi wrote:
> >
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share your
> > opinions on IT & business topics through brief surveys - and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > _______________________________________________
> > Redbutton-devel mailing list
> > Red...@li...
> > https://lists.sourceforge.net/lists/listinfo/redbutton-devel
> >
> >
>
> - --
> Simon Kilvington
>
>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.4 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFFtL7Nmt9ZifioJSwRAjruAJ9NWGQ0sGNR5ExZrQ7O3ikfLA1+/QCggcRp
> Zh268wMAgTY/GiN5kaMMo1w=
> =HeiT
> -----END PGP SIGNATURE-----
>
|
|
From: Simon K. <s.k...@er...> - 2007-01-22 15:24:54
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi,
I've just added a "-d" flag to rb-browser that will disable
all audio and video output
Mario Rossi wrote:
> I will try it this way, but I guess I would loose the new feature of retuning.
> Thanks
>
> On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
>
> Hi,
>
> glad the problem sorted itself out!
>
> the warnings you are getting are from ffmpeg - generally it
> means the mpeg stream is corrupt or not all of it is getting through
> to the decoder in rb-browser
>
> the only way to totally disable audio and video is to not
> run rb-download - run it for a bit to get the files downloaded onto
> the file system, then stop it and start "rb-browser services/XXX"
> (I'm going to make "-o null" disable audio/video, but that's not
> done yet)
>
> once I've got the retuning stuff finished I'm going to start
> looking at different video output methods and making rb-browser more
> responsive when there are problems with the video...
>
> Mario Rossi wrote:
>
>>Hi,
>
>>I must have made a mistake compiling since it works now.
>
>>I still have problems with the video output I had some times ago.
>
>>I run redbutton like this:
>
>>rb-download 4415
>
>>and in another console
>
>>rb-browser -o null services/4415
>
>>I get a lot of warnings like that, and rb becomes very slow in responding.
>
>>[mpeg2video @ 0xb7dfdcc4]ac-tex damaged at 1 24
>>[mpeg2video @ 0xb7dfdcc4]00 motion_type at 35 25
>>[mpeg2video @ 0xb7dfdcc4]00 motion_type at 8 26
>>[mpeg2video @ 0xb7dfdcc4]invalid cbp at 7 27
>>[mpeg2video @ 0xb7dfdcc4]00 motion_type at 30 28
>>[mpeg2video @ 0xb7dfdcc4]invalid cbp at 12 29
>>[mpeg2video @ 0xb7dfdcc4]slice mismatch
>
>>and some about mp3
>
>>[mp3 @ 0xb7dfdcc4]incorrect frame size
>
>>And finally, I get again the behaviour when a click on the X on the
>>top right of the window does not close it, but it freezes.
>>I thought that "-o null" and not using "-l" in the rb-download meant
>>not to bother with the underlying vide but I must be wrong: how can I
>>completely disable the video and audio output?
>
>>Here is a gdb backtrace when it freezes:
>
>>I've run it like "rb-browser -o null services/4415/
>
>>Thread 2 (Thread -1234822240 (LWP 2304)):
>>#0 0x4dcba004 in getenv () from /lib/libc.so.6
>>#1 0x4146178b in snd_strerror () from /usr/lib/libasound.so.2
>>#2 0x4147bbee in snd_pcm_writei () from /usr/lib/libasound.so.2
>>#3 0x08055ae7 in MHEGAudioOutput_addSamples (a=0xb6661354,
>>samples=0xb51b601c, nbytes=4608) at MHEGAudioOutput.c:118
>>#4 0x08054b98 in audio_thread (arg=0x80d50b4) at MHEGStreamPlayer.c:743
>>#5 0x4dfe7433 in start_thread () from /lib/libpthread.so.0
>>#6 0x4dd58a1e in clone () from /lib/libc.so.6
>
>>Thread 1 (Thread -1218033984 (LWP 2300)):
>>#0 0xb7f58410 in ?? ()
>>#1 0xbf9fed78 in ?? ()
>>#2 0x00000900 in ?? ()
>>#3 0x00000000 in ?? ()
>
>>This behaviour is quite random. Could it be related to the fact that I
>>update ffmpeg quite often?
>
>>On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
>
>
>>>-----BEGIN PGP SIGNED MESSAGE-----
>>>Hash: SHA1
>
>>>Hi,
>
>>> I can't understand why this is happening - the "Unable to find
>>>Carousel Descriptor in PMT" error is triggered if no boot/carousel
>>>info is found - but the log here shows that we do find it "Set
>>>boot_pid=2100 carousel_id=4"
>
>>> can you add some lines to print the value of "_car.npids" at
>>>various points in the find_mheg function in find_mheg.c - eg add
>>>something like:
>
>>>printf("npids=%u\n", _car.npids);
>
>>> around line 187 in find_mheg.c
>
>>> what happens if you don't run tzap at the same time?
>
>>> some of the svn changes lately mean you need to do a
>>>"make clean" before compiling - can you try that?
>
>>>SK.
>
>>>Mario Rossi wrote:
>
>
>>-------------------------------------------------------------------------
>>Take Surveys. Earn Cash. Influence the Future of IT
>>Join SourceForge.net's Techsay panel and you'll get the chance to share your
>>opinions on IT & business topics through brief surveys - and earn cash
>>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>_______________________________________________
>>Redbutton-devel mailing list
>>Red...@li...
>>https://lists.sourceforge.net/lists/listinfo/redbutton-devel
>
>
>
> --
> Simon Kilvington
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Redbutton-devel mailing list
> Red...@li...
> https://lists.sourceforge.net/lists/listinfo/redbutton-devel
- --
Simon Kilvington
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFtNc/mt9ZifioJSwRAup4AJ9ecPMfJ+tNFUQgtn8X85gIJlhjJwCfZuEe
jEC9MtMjFvqv3+0K7PN5vUk=
=63XD
-----END PGP SIGNATURE-----
|
|
From: Simon K. <s.k...@er...> - 2007-01-22 15:30:17
|
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
PS: you'll have to do a "make clean" before compiling
Simon Kilvington wrote:
> Hi,
>
> I've just added a "-d" flag to rb-browser that will disable
> all audio and video output
>
> Mario Rossi wrote:
>
>>>I will try it this way, but I guess I would loose the new feature of retuning.
>>>Thanks
>>>
>>>On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
>>>
>>>Hi,
>>>
>>> glad the problem sorted itself out!
>>>
>>> the warnings you are getting are from ffmpeg - generally it
>>>means the mpeg stream is corrupt or not all of it is getting through
>>>to the decoder in rb-browser
>>>
>>> the only way to totally disable audio and video is to not
>>>run rb-download - run it for a bit to get the files downloaded onto
>>>the file system, then stop it and start "rb-browser services/XXX"
>>>(I'm going to make "-o null" disable audio/video, but that's not
>>>done yet)
>>>
>>> once I've got the retuning stuff finished I'm going to start
>>>looking at different video output methods and making rb-browser more
>>>responsive when there are problems with the video...
>>>
>>>Mario Rossi wrote:
>>>
>>>
>>>>Hi,
>>>
>>>>I must have made a mistake compiling since it works now.
>>>
>>>>I still have problems with the video output I had some times ago.
>>>
>>>>I run redbutton like this:
>>>
>>>>rb-download 4415
>>>
>>>>and in another console
>>>
>>>>rb-browser -o null services/4415
>>>
>>>>I get a lot of warnings like that, and rb becomes very slow in responding.
>>>
>>>>[mpeg2video @ 0xb7dfdcc4]ac-tex damaged at 1 24
>>>>[mpeg2video @ 0xb7dfdcc4]00 motion_type at 35 25
>>>>[mpeg2video @ 0xb7dfdcc4]00 motion_type at 8 26
>>>>[mpeg2video @ 0xb7dfdcc4]invalid cbp at 7 27
>>>>[mpeg2video @ 0xb7dfdcc4]00 motion_type at 30 28
>>>>[mpeg2video @ 0xb7dfdcc4]invalid cbp at 12 29
>>>>[mpeg2video @ 0xb7dfdcc4]slice mismatch
>>>
>>>>and some about mp3
>>>
>>>>[mp3 @ 0xb7dfdcc4]incorrect frame size
>>>
>>>>And finally, I get again the behaviour when a click on the X on the
>>>>top right of the window does not close it, but it freezes.
>>>>I thought that "-o null" and not using "-l" in the rb-download meant
>>>>not to bother with the underlying vide but I must be wrong: how can I
>>>>completely disable the video and audio output?
>>>
>>>>Here is a gdb backtrace when it freezes:
>>>
>>>>I've run it like "rb-browser -o null services/4415/
>>>
>>>>Thread 2 (Thread -1234822240 (LWP 2304)):
>>>>#0 0x4dcba004 in getenv () from /lib/libc.so.6
>>>>#1 0x4146178b in snd_strerror () from /usr/lib/libasound.so.2
>>>>#2 0x4147bbee in snd_pcm_writei () from /usr/lib/libasound.so.2
>>>>#3 0x08055ae7 in MHEGAudioOutput_addSamples (a=0xb6661354,
>>>>samples=0xb51b601c, nbytes=4608) at MHEGAudioOutput.c:118
>>>>#4 0x08054b98 in audio_thread (arg=0x80d50b4) at MHEGStreamPlayer.c:743
>>>>#5 0x4dfe7433 in start_thread () from /lib/libpthread.so.0
>>>>#6 0x4dd58a1e in clone () from /lib/libc.so.6
>>>
>>>>Thread 1 (Thread -1218033984 (LWP 2300)):
>>>>#0 0xb7f58410 in ?? ()
>>>>#1 0xbf9fed78 in ?? ()
>>>>#2 0x00000900 in ?? ()
>>>>#3 0x00000000 in ?? ()
>>>
>>>>This behaviour is quite random. Could it be related to the fact that I
>>>>update ffmpeg quite often?
>>>
>>>>On 1/22/07, Simon Kilvington <s.k...@er...> wrote:
>>>
>>>
>>>>>-----BEGIN PGP SIGNED MESSAGE-----
>>>>>Hash: SHA1
>>>
>>>>>Hi,
>>>
>>>>> I can't understand why this is happening - the "Unable to find
>>>>>Carousel Descriptor in PMT" error is triggered if no boot/carousel
>>>>>info is found - but the log here shows that we do find it "Set
>>>>>boot_pid=2100 carousel_id=4"
>>>
>>>>> can you add some lines to print the value of "_car.npids" at
>>>>>various points in the find_mheg function in find_mheg.c - eg add
>>>>>something like:
>>>
>>>>>printf("npids=%u\n", _car.npids);
>>>
>>>>> around line 187 in find_mheg.c
>>>
>>>>> what happens if you don't run tzap at the same time?
>>>
>>>>> some of the svn changes lately mean you need to do a
>>>>>"make clean" before compiling - can you try that?
>>>
>>>>>SK.
>>>
>>>>>Mario Rossi wrote:
>>>
>>>
>>>>-------------------------------------------------------------------------
>>>>Take Surveys. Earn Cash. Influence the Future of IT
>>>>Join SourceForge.net's Techsay panel and you'll get the chance to share your
>>>>opinions on IT & business topics through brief surveys - and earn cash
>>>>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>>>_______________________________________________
>>>>Redbutton-devel mailing list
>>>>Red...@li...
>>>>https://lists.sourceforge.net/lists/listinfo/redbutton-devel
>>>
>>>
>>>
>>>--
>>>Simon Kilvington
>>>
>>>
>
>
>>>-------------------------------------------------------------------------
>>>Take Surveys. Earn Cash. Influence the Future of IT
>>>Join SourceForge.net's Techsay panel and you'll get the chance to share your
>>>opinions on IT & business topics through brief surveys - and earn cash
>>>http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>>>_______________________________________________
>>>Redbutton-devel mailing list
>>>Red...@li...
>>>https://lists.sourceforge.net/lists/listinfo/redbutton-devel
>
>
>
>
> --
> Simon Kilvington
>
>
- -------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Redbutton-devel mailing list
Red...@li...
https://lists.sourceforge.net/lists/listinfo/redbutton-devel
- --
Simon Kilvington
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.4 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iD8DBQFFtNgemt9ZifioJSwRAnA1AJ9IbLMrRRFmDgYICe53BkAqyW95fgCfStfu
R1Dgl9XTrtBKe5rJBPLdXkQ=
=OSuW
-----END PGP SIGNATURE-----
|
|
From: Mario R. <mar...@go...> - 2007-01-22 17:50:51
|
Good. The flag is working. I will use it until I find how to fix video/ffmpeg/audio. Thanks On 1/22/07, Simon Kilvington <s.k...@er...> wrote: > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Hi, > > I've just added a "-d" flag to rb-browser that will disable > all audio and video output |
Thanks for helping keep SourceForge clean.
X