reactos-kernel

[ros-kernel] AW: AW: Re: RE: Re: RE: New ide driver

[Hartmut B. <har...@te...>]

The problem is in IDEGetDriveIdentification(). Two of my disks reports a 
sector size of 580 Byte. When I set DrvParms->BytesPerSector to 512, it 
works fine.

- Hartmut

> -----Ursprungliche Nachricht-----
> Von:	Hartmut Birr [SMTP:har...@te...]
> Gesendet am:	Donnerstag, 1. November 2001 17:09
> An:	'ros...@re...'
> Betreff:	[ros-kernel] AW: Re: RE: Re: RE: New ide driver
>
> The new ide driver fails.
>
> ...
> IDE Driver V0.1.5
> xHalIoReadPartitionTable failed (Status = 0xc000000d)
> IoReadPartitionTable() failed
> \Device\Harddisk1\Partition1 27MB
> \Device\Harddisk1\Partition2 460MB
> \Device\Harddisk1\Partition3 496MB
> \Device\Harddisk1\Partition4 66MB
> xHalIoReadPartitionTable failed (Status = 0xc000000d)
> IoReadPartitionTable() failed
> No ATA drive 1 found on controller 1...
> Did not find any devices for controller 1
> ...
> (ke/main.c:472) NtOpenSymbolicLinkObject() 
'\ArcName\multi(0)disk(0)rdisk(0)partition(1)' failed (Status 0xc0000001)
> Bug detected (code 0)
> ...
>
> The old ide driver prints this partition table:
> \Device\Harddisk0\Partition1 750MB
> \Device\Harddisk0\Partition2 63MB
> \Device\Harddisk1\Partition1 27MB
> \Device\Harddisk1\Partition2 460MB
> \Device\Harddisk1\Partition3 496MB
> \Device\Harddisk1\Partition4 66MB
>
> On the PC are two disks on the first controller and a disk + cdrom at the 
second.
>
> - Hartmut
>
>
> > -----Ursprungliche Nachricht-----
> > Von:	Eric Kohl [SMTP:ek...@rz...]
> > Gesendet am:	Donnerstag, 1. November 2001 16:32
> > An:	ros...@re...
> > Betreff:	[ros-kernel] Re: RE: Re: RE: New ide driver
> >
> >
> > "Steven Edwards" <Ste...@kn...> wrote:
> >
> >
> > > I have a 30 gig on the secound channel along with my CDrom
> >
> > Okay, the modifications are in the CVS tree now. It should recognize 
your 30
> > gig disk but not the cdrom drive. If the harddisk got a fat-partition 
it
> > should be accessible.
> >
> > - Eric Kohl
> >
> >
> > ====================================================
> > = To remove yourself from this mailing list, go to =
> > = http://www.reactos.com/home/mailing.html         =
> > ====================================================
>
> ====================================================
> = To remove yourself from this mailing list, go to =
> = http://www.reactos.com/home/mailing.html         =
> ====================================================

====================================================
= To remove yourself from this mailing list, go to =
= http://www.reactos.com/home/mailing.html         =
====================================================

[ros-kernel] Re: AW: AW: Re: RE: Re: RE: New ide driver

[Eric K. <ek...@rz...>]

"Hartmut Birr" <har...@te...> wrote:


> The problem is in IDEGetDriveIdentification(). Two of my disks reports a
> sector size of 580 Byte. When I set DrvParms->BytesPerSector to 512, it
> works fine.
>
Arrrgh! What kind of disk is this? Any special IBM mainframe disk?

I don't really like the idea of hardcoding the sector size. Perhaps 512
bytes should be a kind of default value if the reported sector size is not
1024 or 2048.

Any ideas??

- Eric Kohl


====================================================
= To remove yourself from this mailing list, go to =
= http://www.reactos.com/home/mailing.html         =
====================================================

[ros-kernel] Re: AW: AW: Re: RE: Re: RE: New ide driver

[Jakob E. <ja...@vm...>]

On Thu, Nov 01, 2001 at 06:38:18PM +0100, Eric Kohl wrote:
> 
> "Hartmut Birr" <har...@te...> wrote:
> 
> 
> > The problem is in IDEGetDriveIdentification(). Two of my disks reports a
> > sector size of 580 Byte. When I set DrvParms->BytesPerSector to 512, it
> > works fine.
> >
> Arrrgh! What kind of disk is this? Any special IBM mainframe disk?

Doesn't it work with 580 byte sector size?

> I don't really like the idea of hardcoding the sector size. Perhaps 512
> bytes should be a kind of default value if the reported sector size is not
> 1024 or 2048.
> 
> Any ideas??
> 

A table with disk brands?

Ignoring the problem and hoping that non-ancient disks behave better?

regards,
Jakob

====================================================
= To remove yourself from this mailing list, go to =
= http://www.reactos.com/home/mailing.html         =
====================================================

[ros-kernel] Re: AW: AW: Re: RE: Re: RE: New ide driver

[Frank D. E. Jr. <fd...@ya...>]

Or at least some power of 2?

--- Eric Kohl <ek...@rz...> wrote:
> 
> "Hartmut Birr" <har...@te...> wrote:
> 
> 
> > The problem is in IDEGetDriveIdentification(). Two of my disks
> reports a
> > sector size of 580 Byte. When I set DrvParms->BytesPerSector to
> 512, it
> > works fine.
> >
> Arrrgh! What kind of disk is this? Any special IBM mainframe disk?
> 
> I don't really like the idea of hardcoding the sector size. Perhaps
> 512
> bytes should be a kind of default value if the reported sector size
> is not
> 1024 or 2048.
> 
> Any ideas??
> 
> - Eric Kohl
> 
> 
> ====================================================
> = To remove yourself from this mailing list, go to =
> = http://www.reactos.com/home/mailing.html         =
> ====================================================
> 


=====
=======
Frank D. Engel, Jr.
Please note my new address: fd...@ya...

__________________________________________________
Do You Yahoo!?
Find a job, post your resume.
http://careers.yahoo.com

====================================================
= To remove yourself from this mailing list, go to =
= http://www.reactos.com/home/mailing.html         =
====================================================