rcpilot-devs — R/C Pilot Developers

[rcpilot-devs] RCAP question about an application.

[Jose L. C. de La R. <jos...@li...>]

Hi everyone in the RCAP development team.

 

First, I want to thank you all for RCAP it's a great project.

 

I have so far implmented it in my RC plane, with great succes.

 

 

I have one question though.

 

I want to implement the system in an R/C Car. And reviewing the schematic of the system,

I'm wondering if for an R/C car the Co-Pilot is needed. It helps controlling the tilt of the plane.

 

But since there are no such variables in an R/C, is it possible to bypass the copilot. and not use it? Or do i have to add another component.

 

 

Another question... regarding the trigger system. Is it possible to enable a trigger system, by programming into the PIC, some codelines, to compare the actual position to the desired triggering position. And when that possition is achieved activate, for eg: a servo???

 

 

 

Thanks for your help.

 

Sincerely yours.

 

Jose De La Rosa

_________________________________________________________________
Got Game? Win Prizes in the Windows Live Hotmail Mobile Summer Games Trivia Contest
http://www.gowindowslive.com/summergames?ocid=TXT_TAGHM

Re: [rcpilot-devs] Is this mailing list still alive?

[C. N. <nf...@gm...>]

Im here ;).

Is there still a "real" team developing on this project?

best regards,

Christopher

On Tue, May 13, 2008 at 9:45 PM, Mario Pisa <mar...@gm...> wrote:
> Hi David,
>
> this sound good, I'm very interested for send telemetry by audio channel, I
> have been playing with this solution:
>
> http://www.rc-cam.com/forum/index.php?showtopic=1691
>
> but I can't had goodlock!, the thread probe with various solution, I have
> tested these, and my oscilloscope appear like forum, but I don't see my GPS
> signal.
>
> I tested this other link:
> http://www.klm-tech.com/technicothica/3105.html
>  but the baud rate is 1200bps and is not valid for my gps baud rate 4800bps.
>
> if you can try with this or others, and you have good lock, please let us
> know it.
>
> Best regards,
>
> Mario
>
>
>
>  On Tue, May 13, 2008 at 9:30 PM, David Young <ran...@gm...> wrote:
> >
> > ok good so we have 3 ppl on this mailing list.  that's better than one.
> =)  thanks for replying.  i'm pretty interested in what has been developed
> so far, but am looking for a newer method of communicating with the plane
> besides x.25 through packet modem as i don't even know where to find
> equipment for that.
> >
> > i'll keep you guys posted,
> > david
> >
> >
> >
> >
> >
> >
> > On 5/13/08, jerry morris <Jer...@ns...> wrote:
> > >
> > > I cann't remember when i subscribed to this list must have been a couple
> years ago
> > > and this is the first msgs i have ever seen.
> > >
> > > jerry
> > >
> > > Mario Pisa wrote:
> > >
> > > ...
> > > pong
> > > ...
> > >
> > > Hi, I never have see any message in any list rcpilot-*
> > >
> > > greetings,
> > >
> > > Mario
> > >
> > >
> > >
> > > On Tue, May 13, 2008 at 6:33 PM, David Young <ran...@gm...>
> wrote:
> > >
> > > >
> > > > Hi, I joined rcpilot list for almost a month now and I haven't seen a
> single discussion.  Just wondering if this mailing list is still active or
> whether this is the right list to subscribe to for rcpilot didcussions.
> > > >
> > > > Thanks
> > > >
> -------------------------------------------------------------------------
> > > > This SF.net email is sponsored by: Microsoft
> > > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > > _______________________________________________
> > > > rcpilot-devs mailing list
> > > > rcp...@li...
> > > > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> > > >
> > > >
> > >
> > > ________________________________
>
> > >
> -------------------------------------------------------------------------
> > > This SF.net email is sponsored by: Microsoft
> > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > ________________________________
>
> > > _______________________________________________
> > > rcpilot-devs mailing list
> > > rcp...@li...
> > > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> > >
> > >
> > >
> > >
> -------------------------------------------------------------------------
> > > This SF.net email is sponsored by: Microsoft
> > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > _______________________________________________
> > > rcpilot-devs mailing list
> > > rcp...@li...
> > > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> > >
> > >
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > rcpilot-devs mailing list
> > rcp...@li...
> > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> >
> >
>
>
> -------------------------------------------------------------------------
>  This SF.net email is sponsored by: Microsoft
>  Defy all challenges. Microsoft(R) Visual Studio 2008.
>  http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
>  rcpilot-devs mailing list
>  rcp...@li...
>  https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
>
>

Re: [rcpilot-devs] Is this mailing list still alive?

[Mario P. <mar...@gm...>]

Hi David,

this sound good, I'm very interested for send telemetry by audio channel, I
have been playing with this solution:

http://www.rc-cam.com/forum/index.php?showtopic=1691

but I can't had goodlock!, the thread probe with various solution, I have
tested these, and my oscilloscope appear like forum, but I don't see my GPS
signal.

I tested this other link:
http://www.klm-tech.com/technicothica/3105.html
but the baud rate is 1200bps and is not valid for my gps baud rate 4800bps.

if you can try with this or others, and you have good lock, please let us
know it.

Best regards,

Mario

On Tue, May 13, 2008 at 9:30 PM, David Young <ran...@gm...> wrote:

> ok good so we have 3 ppl on this mailing list.  that's better than one.
> =)  thanks for replying.  i'm pretty interested in what has been developed
> so far, but am looking for a newer method of communicating with the plane
> besides x.25 through packet modem as i don't even know where to find
> equipment for that.
>
> i'll keep you guys posted,
> david
>
>
>
> On 5/13/08, jerry morris <Jer...@ns...> wrote:
> >
> > I cann't remember when i subscribed to this list must have been a couple
> > years ago
> > and this is the first msgs i have ever seen.
> >
> > jerry
> >
> > Mario Pisa wrote:
> >
> > ...
> > pong
> > ...
> >
> > Hi, I never have see any message in any list rcpilot-*
> >
> > greetings,
> >
> > Mario
> >
> >
> > On Tue, May 13, 2008 at 6:33 PM, David Young <ran...@gm...>
> > wrote:
> >
> > > Hi, I joined rcpilot list for almost a month now and I haven't seen a
> > > single discussion.  Just wondering if this mailing list is still active or
> > > whether this is the right list to subscribe to for rcpilot didcussions.
> > >
> > > Thanks
> > >
> > >
> > > -------------------------------------------------------------------------
> > > This SF.net email is sponsored by: Microsoft
> > > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > > _______________________________________________
> > > rcpilot-devs mailing list
> > > rcp...@li...
> > > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> > >
> > >
> > ------------------------------
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> >
> > ------------------------------
> >
> > _______________________________________________
> > rcpilot-devs mailing lis...@li...https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> >
> >
> >
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > rcpilot-devs mailing list
> > rcp...@li...
> > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> >
> >
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> rcpilot-devs mailing list
> rcp...@li...
> https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
>
>

Re: [rcpilot-devs] Is this mailing list still alive?

[David Y. <ran...@gm...>]

ok good so we have 3 ppl on this mailing list.  that's better than one.  =)
thanks for replying.  i'm pretty interested in what has been developed so
far, but am looking for a newer method of communicating with the plane
besides x.25 through packet modem as i don't even know where to find
equipment for that.

i'll keep you guys posted,
david



On 5/13/08, jerry morris <Jer...@ns...> wrote:
>
> I cann't remember when i subscribed to this list must have been a couple
> years ago
> and this is the first msgs i have ever seen.
>
> jerry
>
> Mario Pisa wrote:
>
> ...
> pong
> ...
>
> Hi, I never have see any message in any list rcpilot-*
>
> greetings,
>
> Mario
>
>
> On Tue, May 13, 2008 at 6:33 PM, David Young <ran...@gm...> wrote:
>
> > Hi, I joined rcpilot list for almost a month now and I haven't seen a
> > single discussion.  Just wondering if this mailing list is still active or
> > whether this is the right list to subscribe to for rcpilot didcussions.
> >
> > Thanks
> >
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by: Microsoft
> > Defy all challenges. Microsoft(R) Visual Studio 2008.
> > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> > _______________________________________________
> > rcpilot-devs mailing list
> > rcp...@li...
> > https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> >
> >
> ------------------------------
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>
> ------------------------------
>
> _______________________________________________
> rcpilot-devs mailing lis...@li...https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
>
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> rcpilot-devs mailing list
> rcp...@li...
> https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
>
>

Re: [rcpilot-devs] Is this mailing list still alive?

[jerry m. <Jer...@ns...>]

<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
  <meta content="text/html;charset=ISO-8859-1" http-equiv="Content-Type">
</head>
<body bgcolor="#ffffff" text="#3366ff">
I cann't remember when i subscribed to this list must have been a
couple years ago<br>
and this is the first msgs i have ever seen.<br>
<br>
jerry<br>
<br>
Mario Pisa wrote:
<blockquote
 cite="mid...@ma..."
 type="cite">...<br>
pong<br>
...<br>
  <br>
Hi, I never have see any message in any list rcpilot-*<br>
  <br>
greetings,<br>
  <br>
Mario<br>
  <br>
  <br>
  <div class="gmail_quote">On Tue, May 13, 2008 at 6:33 PM, David Young
&lt;<a href="mailto:ran...@gm...">ran...@gm...</a>&gt;
wrote:<br>
  <blockquote class="gmail_quote"
 style="border-left: 1px solid rgb(204, 204, 204); margin: 0pt 0pt 0pt 0.8ex; padding-left: 1ex;">
    <div>Hi, I joined rcpilot list for almost a month now and I haven't
seen a single discussion.&nbsp; Just wondering if this mailing list is still
active or whether this is the right list to subscribe to for rcpilot
didcussions.</div>
    <div>&nbsp;</div>
    <div>Thanks</div>
    <br>
-------------------------------------------------------------------------<br>
This SF.net email is sponsored by: Microsoft<br>
Defy all challenges. Microsoft(R) Visual Studio 2008.<br>
    <a href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/"
 target="_blank">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a><br>
_______________________________________________<br>
rcpilot-devs mailing list<br>
    <a href="mailto:rcp...@li...">rcp...@li...</a><br>
    <a href="https://lists.sourceforge.net/lists/listinfo/rcpilot-devs"
 target="_blank">https://lists.sourceforge.net/lists/listinfo/rcpilot-devs</a><br>
    <br>
  </blockquote>
  </div>
  <br>
  <pre wrap="">
<hr size="4" width="90%">
-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft 
Defy all challenges. Microsoft(R) Visual Studio 2008. 
<a class="moz-txt-link-freetext" href="http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/">http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/</a></pre>
  <pre wrap="">
<hr size="4" width="90%">
_______________________________________________
rcpilot-devs mailing list
<a class="moz-txt-link-abbreviated" href="mailto:rcp...@li...">rcp...@li...</a>
<a class="moz-txt-link-freetext" href="https://lists.sourceforge.net/lists/listinfo/rcpilot-devs">https://lists.sourceforge.net/lists/listinfo/rcpilot-devs</a>
  </pre>
</blockquote>
<br>
</body>
</html>

Re: [rcpilot-devs] Is this mailing list still alive?

[Mario P. <mar...@gm...>]

...
pong
...

Hi, I never have see any message in any list rcpilot-*

greetings,

Mario


On Tue, May 13, 2008 at 6:33 PM, David Young <ran...@gm...> wrote:

> Hi, I joined rcpilot list for almost a month now and I haven't seen a
> single discussion.  Just wondering if this mailing list is still active or
> whether this is the right list to subscribe to for rcpilot didcussions.
>
> Thanks
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> rcpilot-devs mailing list
> rcp...@li...
> https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
>
>

[rcpilot-devs] Is this mailing list still alive?

[David Y. <ran...@gm...>]

Hi, I joined rcpilot list for almost a month now and I haven't seen a single
discussion.  Just wondering if this mailing list is still active or whether
this is the right list to subscribe to for rcpilot didcussions.

Thanks

[rcpilot-devs] OT: Invitation to participate in research project

[Ben A. <ben...@st...>]

Hello there

I would greatly appreciate a small amount of your time to assist with
my doctoral research at The University of Newcastle. The research
concerns open source licensing and we're seeking developers working on
Java projects. The research is supervised, ethics-approved, anonymous
and results will be freely available. Participation will also provide a
custom licensing report for your project. To learn more, please visit:

   http://licensing-research.newcastle.edu.au

Thanks for reading this email, and I hope you'll consider participating.

Best regards
Ben Alex

(My apologies for being off-topic; this list will not be emailed again)

[rcpilot-devs] RC - Autopilot

[<mar...@gm...>]

Dear All,
 
I found following website:
<http://rcpilot.sourceforge.net/modules/rcap/index.php>
http://rcpilot.sourceforge.net/modules/rcap/index.php. I am interested
to buy the complete project kit, but the E-mailadress:
<mailto:mi...@vi...> mi...@vi... does not work.
Does anybody know the right address?
Thank you for your help,
best regards,
Martin

[rcpilot-devs] what's new? seen sparkfuns UAV dev board?

[<pe...@mo...>]

NEW UAV DEV board from sparkfun :-)
http://www.sparkfun.com/commerce/product_info.php?products_id=707 


wanted you guys to see this ... looks like may be worth trying to work with 
seems to be just inside the low cost area... worth writing good code for? 

have fun ... keep up the good work ... :-) -pete 

NEED NOT READ ... A LITTLE about my history
I have been wanting to do a guided aircraft project for fun and photography 
for a long time ... but gained some more interest since Maynard Hill's 
atlantic crossing a few years ago ... now in the last few weeks I have been 
able to make more time for research and stumbled across the R/C project 
page... I plan to biuld one of these boards ... it's actualy the same thing 
I was thinging I was going to try ... (using the GPS NMEA waypoint system) 
but you guys did all the work :-)... just a couple days ago spark fun posted 
this new dev board for a UAV system ... looks like it's been configured with 
all the "next logical steps" of a second version of the R/C pilot board..

[rcpilot-devs] Hi

[Edan C. <ec...@es...>]

Hi all,

I was wondering where I might be able to buy the components to make the
autopilot? The links on the webpage no longer work and or the supplier
doesn't have them.

=20

Any help would be greatly appreciated.=20

=20

Kind Regards,

=20

Edan Cain

Re: [rcpilot-devs] PIC Compiler

[Michael J. P. <mi...@mi...>]

Gouliamos wrote:

> Hi, I wonder which PicCompiler you use for this project.
> Thans in advance
> Georgios


MicroEngineering Labs' Pic Basic Pro.
You can get details at: http://www.melabs.com/products/pbp.htm


Cheers,
Mike

[rcpilot-devs] PIC Compiler

[Gouliamos <Gou...@in...>]

Hi, I wonder which PicCompiler you use for this project.
Thans in advance
Georgios

[rcpilot-devs] RCAP

[GIDEONCZACZKES <gi...@ti...>]

Dear Sir,
I would like to buy a RCAP kit.
Can you help ?
Thanks
Gideon

[rcpilot-devs] Re: [rcpilot-site] Problems with Rcap source code

[Michael J. P. <mi...@mi...>]

A & RG Demir wrote:

> Hello Mike
>
> Thanks for your reply .
>
> The following is the problem I came across with the RCAP source code .
>
> 1 . I can not find a call to subroutine "GetPos:" in the program
> listing .
>

Do a find in any text editor.. It's there  :-)
=================================

' Get the start position of gpsdata for a specific field
' The field we are looking for is specified in the var "field"
' We return the position of the specified field back in the var "field"

GetPos:
==================================================================



> 2. Subroutine DoB or DoC line 2 :   Should cs=$8 be there ? cs is not
> known until after return from subroutine DoCS .


Read the comments...     ;-)

cs = $8  ' This is the checksum of "GPRMB"
If you calculated the the checksum of "GPRMB" it is $8.
So since that is always constant, it simply avoids calculating the checkcum 
for those chars everytime.



>
> 3. Subroutine DoB line 8: field=12 (Bearing to destination) . Where is
> the field number 12 obtained from . Is it the position of gpsdata
> array element [12] (GPRMB sentence) ? I find it to be in gpsdata array
> element [48] .
>

The size of a field is not constant. So we can't tell what byte position
we want. However the field positions are constant.
Again if we read the comments....

field = 12                       ' Tell GetNumField which field we want

And then look at the GetNumField subrouting you will see that it 
returns the value of the 12th field.


Cheers,
Mike


P.S. This I'm moving this to the developpers list, since it has nothing
to do with the web site.
The web site list was created for people that were going to create the site.

[rcpilot-devs] Re: RCAP / RCAH etc ...

[Michael J. P. <mi...@mi...>]

Cool...  I'm in Montreal.

Basically what I need is a decent design to get the altitude to digital 
(almost any protocol) with a pretty decent resolution without the parts 
costing too much. Personally I have purchased some really good A/D 
converters, but I would not expect most people to shell out over $100 
for one component.

I've been playing with 2 different sensors. The Motorola that you can 
find in many projects with lots of documentations etc. It is an analog 
component and price is decent. I've also been playing with the Intersema 
one (digital) that is VERY cool but somewhat hard to find and more pricey.

http://www.intersema.ch/site/technical/ms5536.php

The idea was basically we would like to get an accuracy of about 1' 
(that would be optimum) with a range between 0 - 1000'.


Let me know if you want to tackle the analog side. If you do, I will get 
back to work on the digital side of this and we could get it out pretty 
fast.


Mike





Michael Labonte wrote:

> That I do and i have access to lots of scopes / meters etc. I'm an 
> engineering student doing telecommunications engineering. I have a 
> strong background, so I shouldn't be a hindermint. I would love to 
> design all your modules and test them over the next year. I actually 
> started on your site about 6 months ago. Its only now that I'm 
> starting to put my first heli with an aerial system online, hence the 
> spike in interest now in the next step. Full automation, mission 
> specific waypoints etc...
>  
> By the way, where are you located in Canada? I'm in St. John's...
>  
> Mike

[rcpilot-devs] RCAH. gps insted of barometric pressure sensors

[William <wco...@gm...>]

RCAH. gps instead of barometric pressure sensors

can't you take the altitude info from the gps? oh and what kind of php
work do need done?

William

-- 
KC2NEK

website: http://cooltecknet.dyndns.org

[rcpilot-devs] Nothing connected

[Todd H. <hcr...@ya...>]

Thanks for getting back with me.  You are right, there seems to be nothing connected to AGWPE.  I don't think that I have AGWPE configured correctly though.  I am assuming that I don't really have to have TNC's configured and working since I have the programs running on the same PC.  How should the ports in AGWPE be configured?
 
Thanks
Todd


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 

Re: [rcpilot-devs] Some help needed

[<mi...@vi...>]

In AGWPE can you see what applications are connected to it?
There should be 2... rcgs and teldata.


----- Original Message -----
From: Todd Holman <hcr...@ya...>
Date: Friday, October 8, 2004 11:18 am
Subject: [rcpilot-devs] Some help needed

> Group,
> I am looking for some help in getting the ground station to work 
> for me.  I can get both the ground station and the teldata 
> programs to run and they both say that they are connecting to 
> 127.0.0.1:8000 with AGWPE running but when I start sending 
> telemetry data nothing seems to get to the ground station.  I 
> don't know too much about ports and packets so if there is anyone 
> willing to answer some questions it sure would be helpful.
> 
> Thanks
> Todd
> 
>        	
> ---------------------------------
> Do you Yahoo!?
> vote.yahoo.com - Register online to vote today!
> 

[rcpilot-devs] Some help needed

[Todd H. <hcr...@ya...>]

Group,
I am looking for some help in getting the ground station to work for me.  I can get both the ground station and the teldata programs to run and they both say that they are connecting to 127.0.0.1:8000 with AGWPE running but when I start sending telemetry data nothing seems to get to the ground station.  I don't know too much about ports and packets so if there is anyone willing to answer some questions it sure would be helpful.
 
Thanks
Todd

		
---------------------------------
Do you Yahoo!?
vote.yahoo.com - Register online to vote today!

[rcpilot-devs] Re: flight control

[Michael J. P. <mi...@mi...>]

RCAP is not suitable for helicopters. You should look into the autopilot=20
project on source forge.
It is geared towards helis but is much more complex and expensive.

RCAP does work on fixed wing aircrafts (trainers). The main drawback=20
right now is there is no altitude hold.
I would simply need a decent barometric pressure schematic to complete=20
the altitude hold.

If you would like to work on that, that would be amazing. Let me know=20
and we can discuss some details.

Cheers,
Mike


SpEng wrote:

>Message body follows:
>
>I was wondering about the Kit for the rcpilot. If I could get an=20
>un-assemble one if avaiable.
>I've been fly rc copters for about 3 years now and have been=20
>looking for something along this line. Could you also tell me=20
>more about it's capability=92s  (Alt. hold,  if a secondary gyro is=20
>needed, is there any info on how well it will hold it's position )=20
>and what your over all goals are for the project.
>
>I was all so interested in being apart of the development.
>I have a Bachelors of electronics engineering and a Bachelors=20
>of Software Engineering.
>
>--
>This message has been sent to you, a registered SourceForge.net user,
>by another site user, through the SourceForge.net site.  This message
>has been delivered to your SourceForge.net mail alias.  You may reply
>to this message using the "Reply" feature of your email client, or
>using the messaging facility of SourceForge.net at:
>https://sourceforge.net/sendmessage.php?touser=3D1132129
> =20
>

Re: [rcpilot-devs] Bungee Launcher Question

[Michael J. P. <mi...@vi...>]

I don't have any experince with catapults besides lauching some gliders.
But at one point I was looking into trying to get one built by sme 
members at my club but no one was really interested in it.

Anyways, I did find a pretty cool catapult using comnpressed air.
Basically like a potato gun in some ways.

Here is the link:
http://home1.gte.net/texhills/page13.html

I had found quite a few others while searching in RCGroups.

Mike



A. Willy wrote:

> Hi all,
>  
> first of all, thanks for accepting me as a new member in your group.
> second, i have a question concerning the Bungee Launching of UAV airplanes
> i need to know how can i desing the Bungee Launching system and from 
> where i can buy its components
> i mean the Bungee cord specifications, how can i calculate it, how is it 
> fixed to the launcher, and the airplane, and from where i can buy it
>  
> i hope you can help me and thanks again for your time
>  
> regards,
> A. W
> 
> ------------------------------------------------------------------------
> Do you Yahoo!?
> Yahoo! Mail 
> <http://us.rd.yahoo.com/mail_us/taglines/50x/*http://promotions.yahoo.com/new_mail/static/efficiency.html> 
> - 50x more storage than other providers!

[rcpilot-devs] Bungee Launcher Question

[A. W. <mai...@ya...>]

Hi all,
 
first of all, thanks for accepting me as a new member in your group.
second, i have a question concerning the Bungee Launching of UAV airplanes
i need to know how can i desing the Bungee Launching system and from where i can buy its components
i mean the Bungee cord specifications, how can i calculate it, how is it fixed to the launcher, and the airplane, and from where i can buy it
 
i hope you can help me and thanks again for your time
 
regards,
A. W



		
---------------------------------
Do you Yahoo!?
Yahoo! Mail - 50x more storage than other providers!

Re: [rcpilot-devs] Test Map

[chris s. <chr...@ya...>]

Hmm that definitely sounds like a bug in my code then.
 Can you tell me how to replicate the problem?

chris

--- "Michael J. Pawlowsky" <mi...@vi...>
wrote:
> 
> It's happening on the Montreal Map for me.
> I double checked it with UI-View (an APRS app) and
> it works fine on it, 
> but I don't get that same position on RCGS.
> 
> That's why I created the Test map.
> 
> I will make Test2 map tonight with proper longitude
> marks and give that 
> a try.
> 
> I'll let you know.
> 
> 
> 
> > I just wanted to make sure we're talking about the
> > same issue.  If you're having problems with home
> > appearing in the wrong place, it is most likely a
> bug
> > in my code, but I haven't seen this happening.  Is
> it
> > happening to you?
> 
> 
>
-------------------------------------------------------
> This SF.Net email sponsored by Black Hat Briefings &
> Training.
> Attend Black Hat Briefings & Training, Las Vegas
> July 24-29 - 
> digital self defense, top technical experts, no
> vendor pitches, 
> unmatched networking opportunities. Visit
> www.blackhat.com
> _______________________________________________
> rcpilot-devs mailing list
> rcp...@li...
>
https://lists.sourceforge.net/lists/listinfo/rcpilot-devs
> 



		
__________________________________
Do you Yahoo!?
Yahoo! Mail is new and improved - Check it out!
http://promotions.yahoo.com/new_mail

RE: [rcpilot-devs] Test Map

[Mike D. <mik...@sh...>]

Hey Mike, Its Mike.

Im sorry Ive had some issues with My g/f being in the hospital and my
company got really busy, how's the site? You still need anything? Ive
got my crew on standby if you need a site! We can have it done within a
few days now that I have my head scripter back. What do you think? If
you need me feel free to drop me a line at mik...@sh.... Sorry
about how long it took to get back to you!

Later

Mike

-----Original Message-----
From: rcp...@li...
[mailto:rcp...@li...] On Behalf Of Michael
J. Pawlowsky
Sent: Monday, June 28, 2004 6:12 AM
To: rcp...@li...
Subject: Re: [rcpilot-devs] Test Map



It's happening on the Montreal Map for me.
I double checked it with UI-View (an APRS app) and it works fine on it, 
but I don't get that same position on RCGS.

That's why I created the Test map.

I will make Test2 map tonight with proper longitude marks and give that 
a try.

I'll let you know.



> I just wanted to make sure we're talking about the
> same issue.  If you're having problems with home
> appearing in the wrong place, it is most likely a bug
> in my code, but I haven't seen this happening.  Is it happening to 
> you?


-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training. Attend
Black Hat Briefings & Training, Las Vegas July 24-29 - 
digital self defense, top technical experts, no vendor pitches, 
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
rcpilot-devs mailing list
rcp...@li...
https://lists.sourceforge.net/lists/listinfo/rcpilot-devs