I built a new install 6 days ago and it's been working fine. I have 6 extensions connected, 5 of which are remote. This morning is has stopped working and the phones (Cisco SPA 525G) are all flashing orange and are not working.
I rebooted the RPi and that didn't work.
When I logged into FreePBX, it said "Unable to connect to Asterisk" in the top right so I ran asterisk -r to confirm it wasn't running then fwconsole restart to start it and asterisk -r to confirm it was running.
It's still not resolved the issue and I don't know what to check next. Can anyone give me some trouble shooting guidance as to what I need to look at next?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I built a new install 6 days ago and it's been working fine. I have 6 extensions connected, 5 of which are remote. This morning is has stopped working and the phones (Cisco SPA 525G) are all flashing orange and are not working.
I rebooted the RPi and that didn't work.
When I logged into FreePBX, it said "Unable to connect to Asterisk" in the top right so I ran
asterisk -r
to confirm it wasn't running thenfwconsole restart
to start it andasterisk -r
to confirm it was running.It's still not resolved the issue and I don't know what to check next. Can anyone give me some trouble shooting guidance as to what I need to look at next?
Still having problems?
FreePBX does force a 10 minute wait on reboot/startup before it lists as running. Is this your issue?
Also, do your FreePBX modules update automatically ? If so, then the modules may be ahead of the asterisk. On the raspberry pi console trying running
raspbx-upgrade