Main modified by Ben Croston

Ben Croston — Wed, 18 Dec 2013 17:38:33 -0000

--- v1
+++ v2
@@ -1,13 +0,0 @@
-# RPi.GPIO Python Module
-
-To get started with RPi.GPIO, it would be worthwhile reading the examples [here](Examples). 
-
-Warning! If you are a beginner with electronics prototyping, it is highly recommended that you use a buffer board (such as the Gertboard) rather than connecting directly to your Raspberry Pi. If you are not careful, you can damage your Raspberry Pi! 
-
-Note that RPi pins 3 and 5 (Rev2 - GPIO 02 and 03, Rev1 - GPIO 00 and 01) have 1K8 pull-up resistors to 3v3. 
-
-Detailed technical reference can be found at: 
-
-  * 
-  * 
-  *

Main modified by Anonymous

Anonymous — Wed, 18 Dec 2013 16:59:37 -0000

RPi.GPIO Python Module

To get started with RPi.GPIO, it would be worthwhile reading the examples here.

Warning! If you are a beginner with electronics prototyping, it is highly recommended that you use a buffer board (such as the Gertboard) rather than connecting directly to your Raspberry Pi. If you are not careful, you can damage your Raspberry Pi!

Note that RPi pins 3 and 5 (Rev2 - GPIO 02 and 03, Rev1 - GPIO 00 and 01) have 1K8 pull-up resistors to 3v3.

Detailed technical reference can be found at:

Recent changes to Main

Main modified by Ben Croston

Main modified by Anonymous

RPi.GPIO Python Module