Ok, I can confirm that compiling it
myself *did* fix the problem. I was able to compile straight from
git though, I got an error on configure. I'll post that later. I
was able to compile the most recent release that you can download
from website. So thanks for your help!
Here's the error I got when I tried to compile what I downloaded from git:
tim@tim-laptop:~/rakarrack/rakarrack$ make Making all in src make: Entering directory `/home/tim/rakarrack/rakarrack/src'
make all-am make: Entering directory `/home/tim/rakarrack/rakarrack/src' g++ -DHAVE_CONFIG_H -I. -Wall -msse2 -mfpmath=sse -ffast-math -ftree-vectorize -fvect-cost-model -pipe -fsigned-char -I/usr/include/freetype2 -g -O2 -D_THREAD_SAFE -D_REENTRANT -g -O2 -MT main.o -MD -MP -MF .deps/main.Tpo -c -o main.o main.C
In file included from Harmonizer.h:31, from global.h:191, from main.C:28: smbPitchShift.h:46:19: error: fftw3.h: No such file or directory In file included from Harmonizer.h:31,
from global.h:191, from main.C:28: smbPitchShift.h:79: error: ‘fftw_complex’ does not name a type smbPitchShift.h:80: error: ‘fftw_plan’ does not name a type make: *** [main.o] Error 1
make: Leaving directory `/home/tim/rakarrack/rakarrack/src' make: *** [all] Error 2 make: Leaving directory `/home/tim/rakarrack/rakarrack/src' make: *** [all-recursive] Error 1 tim@tim-laptop:~/rakarrack/rakarrack$
On 11/28/12 6:51 PM, Ryan Billing wrote:
Does your computer support SSE or SSE2 instructions? I am
the ppa build included some hardware options that your computer
Have you tried rakarrack from the official repository using the
Something that will help determine whether the problem is
do with the compilation vs your hardware is if you compile it on
I can't think why distortion would not work, but the other FX
work? Is this the case, or do none of the FX work?
If you would be so kind as to compile it on your own hardware, I
help you through the process (if you need help). It is not very
even if you have never done it before. If you are experienced
compiling sources, then I suggest building rakarrack from the
development (git). Either way, it would be good to find out the
results of building 0.6.1 on your own machine so we can learn what
causes the problem.
On 11/28/2012 03:31 PM, Tim Urberg wrote:
I found this post when doing a Google Search as I have the same
problem. It appears as though distortion does not work in
is what I did, and I apologize for not having any logs yet.
I did all the following on a Dell Inspiron 9300 with a 1.6ghz
processor, 2GB of RAM, and 160 GB hard drive:
Jack version 0.118.0 - There were no errors in Jack or Rakarrack
through out this process. I used the Spandex preset to test
Keep yourself connected to Go Parallel:
VERIFY Test and improve your parallel project with help from experts
and peers. http://goparallel.sourceforge.net