MeshDesk firmware missing in download section

The professional way to manage your WiFi network using FreeRADIUS

Brought to you by: dvdwalt

MeshDesk firmware missing in download section

Forum: MESHdesk Help

Created: 2017-02-14

Updated: 2017-03-05

john - 2017-02-14

Hey, I am not sure if anyone notices, but the tplink meshdesk firmware in the downmoad section is missing.
can the developer please add it back?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

kostas Labropoulos - 2017-02-14

i confirm, we already need to flash some new routers and we need the firmware files, can you inform us when the files will be online?

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

ab rr - 2017-02-14

i do need these fimwares, developer please make available TP-Link and UBNT firmware. Thanks in advance

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Nguyen Quang - 2017-02-17

So do I, Thank in advance

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

kostas Labropoulos - 2017-02-20

WE BADLY NEED 841N V11 FIRMWARE, IT WAS WORKING FINE WHY YOU REMOVED IT? PLEASE UPLOAD IT ,SO MANY PEOPLE ARE ASKING FOR IT. THANK YOU AND SORRY FOR CAPS, I SHOULD USE!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Jimbob21 - 2017-02-21

Hi Guys,
Here is the Meshdesk firmware for the 841 v11built with OpenWRT.
I will build firmware with LEDE over the weekend if you would rather have LEDE firmware.
Regards,
Jimmy

openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-factory.bin

openwrt-ar71xx-generic-tl-wr841n-v11-squashfs-sysupgrade.bin

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

John macfee - 2017-02-21

Post awaiting moderation.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Xavier - 2017-02-22

Hi Jimmy,
Great that you posted this firmware. Is it possible for you to upload somewhere the LEDE feeds, files and the .config you use in order to compile the firmware. The guys @ OpenWisp have an image generator we would like to use in order to automate the firmware we plan to use. If more firmwares are available it will greatly enhance this community.
Thanks

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Mohemmed Niyaz - 2017-03-01

Hey, can someone add the firmware for 841N v10.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Dirk van der Walt - 2017-03-02

https://sourceforge.net/projects/radiusdesk/files/MESHdesk/Firmware/UserContributedFirmwares/

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Burek - 2017-03-05

Hello Dirk,

I am trying to load the meshdisk with firmware tftp. However, the device is in brick mode. I can open the standard OpenWRT, but I can not build MeshDesk. Help please.

Device: 841N v11

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Junk Kool - 2017-08-23

Hello everyone, great job about this firmware, just one thing, have you noticed there is no firmware for v9, there is only sysupgrade bin, I would appreciate if you can upload again, thanks in advance.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Log in to post a comment.