Hello All,
I made a backup of my TL-W841N-V11 firmware.
Never did that before and never installed it however if one is able to use I'll be very happy.
Here is the link from my google drive https://goo.gl/OqTwKp
Give me some feedback.
I followed the procedure Create Full MTD Backup from https://wiki.openwrt.org/doc/howto/generic.backup.
Cheers
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
According to this post. https://forum.openwrt.org/viewtopic.php?pid=195191#p195191
My backup should be flashable. As the available memory is pretty low I doubt that sysupgrade will work. The best option would be to restore the original TP link firmware with TFTP then flash this backup through the web interface.
Cheers
Last edit: Xavier 2017-02-21
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello All,
I made a backup of my TL-W841N-V11 firmware.
Never did that before and never installed it however if one is able to use I'll be very happy.
Here is the link from my google drive https://goo.gl/OqTwKp
Give me some feedback.
I followed the procedure Create Full MTD Backup from https://wiki.openwrt.org/doc/howto/generic.backup.
Cheers
According to this post. https://forum.openwrt.org/viewtopic.php?pid=195191#p195191
My backup should be flashable. As the available memory is pretty low I doubt that sysupgrade will work. The best option would be to restore the original TP link firmware with TFTP then flash this backup through the web interface.
Cheers
Last edit: Xavier 2017-02-21
Hi,
See this thread for firmware https://sourceforge.net/p/radiusdesk/discussion/meshdeskhelp/thread/c428f79a/