Hello, i succesfully install Radiusdesk following the steps at http://www.radiusdesk.com/old_wiki/getting_started/install, i make the installation on a VPS with vultr running Ubuntu 14.04, it running fine, and actually i made a video of how to add a Mikrotik NAS and upload to youtube to https://www.youtube.com/watch?v=8dHPtV3O_mk, now, the problem i'm facing is that i create a new profile to limit the bandwith for Permanent Users, however when i run a speedtest i get the full speed of the connection, what am i doing wrong ? this are my settings, Thanks ! https://s16.postimg.org/gam6gzj0l/Profile.jpg
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Stephen, i had to run freeradius -X since radiusd -X command it doesnt works because i have installed the version 3 of freeradius, i select the BW-2Mbs profile here is the log attached
Hi, thanks for your response, i set in the way you said, then i restart the VPS, after that i attached the profile but no luck :( i'm still have the full bandwith
you have to check also at the MT device that will not be present the fasttrack rule enabled.
You can check this link : http://wiki.mikrotik.com/index.php?title=Manual:IP/Fasttrack
..... Fasttracked packets bypass firewall, connection tracking, simple queues, queue tree with parent=global, ip traffic-flow(restriction removed in 6.33), ip accounting, ipsec, hotspot universal client, vrf assignment, so it is up to administrator to make sure fasttrack does not interfere with other configuration .....
Hello, i succesfully install Radiusdesk following the steps at http://www.radiusdesk.com/old_wiki/getting_started/install, i make the installation on a VPS with vultr running Ubuntu 14.04, it running fine, and actually i made a video of how to add a Mikrotik NAS and upload to youtube to https://www.youtube.com/watch?v=8dHPtV3O_mk, now, the problem i'm facing is that i create a new profile to limit the bandwith for Permanent Users, however when i run a speedtest i get the full speed of the connection, what am i doing wrong ? this are my settings, Thanks ! https://s16.postimg.org/gam6gzj0l/Profile.jpg
Have you tried Tool/Radius test ? What is the result?
Hello, the tool seems that doesn't works , i get this result when i press the "Ok" button
anybody else can help ?
Have you run Radius in debugging mode ( radiusd -X ). This will show you what is happening with the profile variables.
Hi Stephen, i had to run freeradius -X since radiusd -X command it doesnt works because i have installed the version 3 of freeradius, i select the BW-2Mbs profile here is the log attached
Last edit: Milo Torres 2016-10-04
Milo if you using MT than this will work for you.
Hi, thanks for your response, i set in the way you said, then i restart the VPS, after that i attached the profile but no luck :( i'm still have the full bandwith
So no one else has this problem, am i the only one :(
Hi
Also I use Mikrotik and this profile as you can see in the attached works flawlessly..
Hi Milo,
you have to check also at the MT device that will not be present the fasttrack rule enabled.
You can check this link :
http://wiki.mikrotik.com/index.php?title=Manual:IP/Fasttrack
..... Fasttracked packets bypass firewall, connection tracking, simple queues, queue tree with parent=global, ip traffic-flow(restriction removed in 6.33), ip accounting, ipsec, hotspot universal client, vrf assignment, so it is up to administrator to make sure fasttrack does not interfere with other configuration .....
It could be also possible that you are not able to see it.
But you can try to add it and then disable as per this link :
http://forum.mikrotik.com/viewtopic.php?f=2&t=111641&p=554720&hilit=fasttrack+queue#p554720
I hope that with this links, you will solve your problem.
Regards
;)