Re: [Qutecsound-devel] how to include files in example
Brought to you by:
mantaraya36
Menu
▾
▴
Re: [Qutecsound-devel] how to include files in example
|
From: joachim h. <jh...@jo...> - 2021-08-23 23:23:15
|
which kind of documentation do you mean? On 23/08/2021 21:59, Tarmo Johannes wrote: > Hi! > > I merged the changes to develop and pushed to github. Now the only hard > thing is to write documentation about it... > > tarmo > > Kontakt joachim heintz (<jh...@jo... > <mailto:jh...@jo...>>) kirjutas kuupäeval N, 19. august 2021 > kell 16:10: > > i did some work on the examples and just pushed. so please merge any > time you like. > > just to let you know i get these linker issues at the very end of my > compilation: > > /usr/bin/ld: /home/jh/src/Qt5/5.15.2/gcc_64/lib/libQt5WebEngineCore.so: > .dynsym local symbol at index 3 (>= sh_info of 3) > /usr/bin/ld: /home/jh/src/Qt5/5.15.2/gcc_64/lib/libQt5WebEngineCore.so: > .dynsym local symbol at index 4 (>= sh_info of 3) > ... etc up to > /usr/bin/ld: /home/jh/src/Qt5/5.15.2/gcc_64/lib/libQt5WebEngineCore.so: > .dynsym local symbol at index 20 (>= sh_info of 3) > > not sure it is in any way related to the examples (probably not). it > does not prevent me from building CsoundQt either. > > cheers - > j > > > On 17/08/2021 22:34, joachim heintz wrote: > > yes definitely! i will try your changes and clean some examples > > tomorrow; if all is ok please merge then. > > cheers - > > j > > > > > > On 16/08/2021 23:02, Tarmo Johannes wrote: > >> Hi! > >> > >> Thanks for noticing this! There was a hardcoded limit to filling > the > >> menus, I increased that to 256, so even big folders should build up > >> nicely. > >> Pushed to git. > >> > >> Does it seem OK to merge it to the develop branch (after some > tiding > >> up) soon? > >> > >> Best! > >> tarmo > >> > >> Kontakt joachim heintz (<jh...@jo... > <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>>>) > kirjutas kuupäeval R, 13. august 2021 > >> kell 22:54: > >> > >> wonderful! > >> > >> i checked several examples, and all worked fine =) > >> > >> i found one issue in the FLOSS examples, 05 Sound Modification: > >> i see only examples up to 05H02 in the dropdown menu. > >> the other examples (05H03 and following) are in the source > folder but > >> not in my built. > >> > >> can you check if it is the same for you? > >> > >> (please pull first; idid some small changes to some examples.) > >> > >> cheers - > >> joachim > >> > >> > >> > >> > >> On 12/08/2021 22:37, Tarmo Johannes wrote: > >> > Hi! > >> > > >> > I finished now a new system for managing examples, it is > done > >> at the > >> > moment in separate path "examples": > >> > https://github.com/CsoundQt/CsoundQt/tree/examples > <https://github.com/CsoundQt/CsoundQt/tree/examples> > >> <https://github.com/CsoundQt/CsoundQt/tree/examples > <https://github.com/CsoundQt/CsoundQt/tree/examples>> > >> > <https://github.com/CsoundQt/CsoundQt/tree/examples > <https://github.com/CsoundQt/CsoundQt/tree/examples> > >> <https://github.com/CsoundQt/CsoundQt/tree/examples > <https://github.com/CsoundQt/CsoundQt/tree/examples>>> > >> > > >> > 1) I moved the examples from source root directory to > >> > src/Examples/CsoundQt (maybe there is a better name for it, > >> Joachim?). > >> > src/Examples will be the place where we can put all the > examples > >> from now on > >> > 2) the Examples menu is filled automatically according the > >> subfolders in > >> > the Examples path. It means we can easily add new categories, > >> regroup > >> > the examples etc - managing the examples does not require > >> touching the > >> > CsoundQt source code any more > >> > 3) I moved source materials from FLOSS ans McCurdy one > level > >> up, to > >> > src/Examples/SourceMateriald and got rid of the > duplicates this > >> way. I > >> > changed the current references to ../../SourceMaterials in > >> csd-s. New > >> > source materials can be put there, too, if needed for new > >> examples. > >> > 4) The examples folder should be found automatically in most > >> cases, but > >> > for special occasions, I added an option under > >> > Configuration->Environment to set the path of examples > folder, if > >> user > >> > needs to. > >> > > >> > I still think it is good to move the examples out to > another repo > >> > (CsoundQt/Examples perhaps?) and use it as a git > submodule - so > >> it can > >> > be pulled easily together with CsoundQt source but it is > >> possible to > >> > pull also just source, without examples (this is probably > good > >> for linux > >> > packagers), too. The benefit is that managing examples gets > >> independent, > >> > you can always download newest version from git as zip, > also it > >> gets > >> > more easy and clearer to handle, so we can hope to get more > >> people to > >> > contribute and take care of the example base. I don't > know how > >> to do > >> > the submodule thing, to be honest, but I will figure out, > if you > >> agree > >> > it makes sense. > >> > > >> > Joachim, if you have a chance to test if the examples > work, would > >> be great! > >> > > >> > tarmo > >> > > >> > > >> > Kontakt joachim heintz (<jh...@jo... > <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>> > >> > <mailto:jh...@jo... <mailto:jh...@jo...> > <mailto:jh...@jo... <mailto:jh...@jo...>>>>) > >> kirjutas kuupäeval E, 2. august 2021 kell > >> > 23:11: > >> > > >> > hi - > >> > > >> > sounds great what you say about your work on this! > thanks a > >> lot for > >> > doing it so fast. > >> > > >> > i am not sure i understand your discussion well, > about the > >> own repo for > >> > the examples. but i'd definitely prefer to have the > examples > >> > *included* > >> > in CsoundQt, as it was. i think the examples are one > of the > >> pros for > >> > CsoundQt, and we should not require to be always > online or > >> something (i > >> > just was in the middle of germany and had no internet > access, > >> not even > >> > mobile ...). > >> > > >> > cheers - > >> > joachim > >> > > >> > > >> > > >> > On 02/08/2021 17:01, Tarmo Johannes wrote: > >> > > Hi! > >> > > > >> > > 1) Started work on moving all examples to > src/Examples. I > >> do it in a > >> > > separate branch (examples) just for any case. I > have not > >> pushed > >> > it yet > >> > > though. > >> > > > >> > > I moved the main examples to Examples/CsoundQt and > >> expanded a bit > >> > the > >> > > folders where the examples can be found.. The only > >> example/csd > >> > that has > >> > > to be delivered within the resources with the > binary is > >> Eduardo's > >> > > AudioMidiTest.csd as I find it absolutely > necessary to > >> have it > >> > by the > >> > > program in all times. > >> > > > >> > > The menu gets populated automatically quite fine, it > >> needs some > >> > more > >> > > work (Getting Started submenus and Stria Synth), I > moved > >> all > >> > resources > >> > > files to Examples/SourceMaterials Next step is to > change > >> McCurdy and > >> > > Floss examples so that they would use the one path and > >> would not > >> > > duplicate the files. > >> > > > >> > > Now I have to finish but hopefully I will put it > out for > >> testing > >> > soon. > >> > > > >> > > > >> > > 2) Moving the examples to separate git repo is > very good > >> idea, I > >> > think. > >> > > Eduardo, did you have in mind that it is the CsoundQt > >> program > >> > that does > >> > > the git pull or it the user/packager who pulls it > via git > >> submodules > >> > > before building? The first case won't probably > work since > >> most of > >> > users > >> > > don't have git installed. > >> > > > >> > > > >> > > Greetings, > >> > > tarmo > >> > > > >> > > Kontakt Eduardo Moguillansky > >> (<edu...@gm... > <mailto:edu...@gm...> > >> <mailto:edu...@gm... > <mailto:edu...@gm...>> > >> > <mailto:edu...@gm... > <mailto:edu...@gm...> > >> <mailto:edu...@gm... > <mailto:edu...@gm...>>> > >> > > <mailto:edu...@gm... > <mailto:edu...@gm...> > >> <mailto:edu...@gm... > <mailto:edu...@gm...>> > >> > <mailto:edu...@gm... > <mailto:edu...@gm...> > >> <mailto:edu...@gm... > <mailto:edu...@gm...>>>>>) kirjutas kuupäeval R, 30. > >> > > juuli 2021 kell 14:42: > >> > > > >> > > Another idea: > >> > > > >> > > Maybe the examples could be moved to their own > repo. > >> In linux > >> > (or in > >> > > the other platforms as well) this repo could be > >> cloned/pulled by > >> > > csoundqt. Then the examples and their > resources would > >> be in > >> > > predictable places and the resources can be > accessed by > >> > relative paths. > >> > > > >> > > eduardo > >> > > > >> > > On 30.07.21 13:35, Tarmo Johannes wrote: > >> > >> Yes, > >> > >> > >> > >> I agree it makes sense to rework it. On MacOs > and > >> Windows > >> > with the > >> > >> installers it is no problem, on Linux we must > make > >> sure that the > >> > >> examples can be found, perhaps there should be an > >> option in the > >> > >> configuration. > >> > >> > >> > >> Greetings, > >> > >> Tarmo > >> > >> > >> > >> R, 30. juuli 2021 13:43 joachim heintz > >> <jh...@jo... <mailto:jh...@jo...> > <mailto:jh...@jo... <mailto:jh...@jo...>> > >> > <mailto:jh...@jo... > <mailto:jh...@jo...> <mailto:jh...@jo... > <mailto:jh...@jo...>>> > >> > >> <mailto:jh...@jo... > <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>> > <mailto:jh...@jo... <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>>>>> > >> > kirjutas: > >> > >> > >> > >> thanks for the reply, tarmo! > >> > >> > >> > >> the inclusion of sound files into some of > the csd > >> > examples is > >> > >> not only > >> > >> an issue for ImitativeAdditive.csd. > there are a > >> couple > >> > of other > >> > >> examples which i would like to change, > too. so > >> moving the > >> > >> examples to > >> > >> another category is no solution. > >> > >> > >> > >> after your explanation i have two ideas: > >> > >> > >> > >> 1. would it be possible (and not too hard) to > >> treat the > >> > current > >> > >> /examples in the same way as > src/Examples? this > >> means that > >> > >> they are not > >> > >> compiled, but just copied. i think this is > >> actually also > >> > >> better because > >> > >> then the users can access the csd files. > and we > >> could > >> > add the > >> > >> sound > >> > >> files in a similar way i did it with the > floss > >> manual > >> > examples. > >> > >> i think this would be the best solution. > >> > >> > >> > >> 2. if not possible, the method you described > >> should be > >> > allright: > >> > >> "Thus the fox.wav added this way should be > >> copied (by > >> > Qt) to a > >> > >> temporary > >> > >> location first and the path should be > given to > >> Csound via > >> > >> --env:SSDIR+= > >> > >> or setting environment variable." > >> > >> > >> > >> let me know what you think; cheers - > >> > >> > >> > >> joachim > >> > >> > >> > >> > >> > >> On 30/07/2021 11:34, Tarmo Johannes wrote: > >> > >> > Hi! > >> > >> > > >> > >> > Sorry, I did see your email but waited > for a > >> good > >> > moment to > >> > >> try it out. > >> > >> > I did not yet but for now I can explain the > >> background: > >> > >> > > >> > >> > there are two places for examples - > <CsoundQt > >> source > >> > >> folder>/examples > >> > >> > and and <source>/src/Examples > >> > >> > > >> > >> > The first gets compiled as binary code to > >> CsoundQt as Qt > >> > >> resource, the > >> > >> > second, the "extended examples" (Floss, > McCurdy, > >> > Stria) gets > >> > >> installed > >> > >> > to the system as normal folders. > >> > >> > > >> > >> > The problem is that Qt can read from the > >> compiled-in > >> > >> resource but Csound > >> > >> > not. Thus the fox.wav added this way > should be > >> copied (by > >> > >> Qt) to a > >> > >> > temporary location first and the path > should be > >> given to > >> > >> Csound via > >> > >> > --env:SSDIR+= or setting environment > variable. > >> Quite some > >> > >> hassle. > >> > >> > > >> > >> > One solution is to add the material to > the end > >> of csd with > >> > >> the <CsFileB > >> > >> > filename="fox.wav"></CsFileB> (I forgot > which > >> tool > >> > helps to > >> > >> do it) (like > >> > >> > in case of > Synths/Scanned_Synthes_Sandbox.csd) > >> > >> > but anyway - I think at some point > Andés and > >> René > >> > discussed > >> > >> it and > >> > >> > decided that no large source materials are > >> added to > >> > >> src/examples - it > >> > >> > makes just the CsoundQt binary grow. > >> > >> > > >> > >> > Much simpler way would be to put > >> > ImitiativeAdditive.csd into > >> > >> the real > >> > >> > folder under "src/Examples" where > fox.wav is > >> is in > >> > >> > src/Examples/FLOSS Manual > >> Examples/SourceMaterials/ > >> > and set > >> > >> the SSDIR > >> > >> > relative to the csd. Perhaps it makes > sense to > >> do another > >> > >> folder like: > >> > >> > > >> > >> > src/Examples/Other (please think about > a good > >> name) > >> > and then > >> > >> > --env:SSDIR+=../FLOSS Manual > >> Examples/SourceMaterials > >> > >> > should work. > >> > >> > > >> > >> > I am not sure at the moment if the Examples > >> menu gets > >> > populated > >> > >> > automatically or we need to create another > >> entry. in > >> > the code. > >> > >> > > >> > >> > Please let me know what you think and if I > >> can help > >> > somehow? > >> > >> > > >> > >> > tarmo > >> > >> > > >> > >> > Kontakt joachim heintz > (<jh...@jo... <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>> > >> > <mailto:jh...@jo... > <mailto:jh...@jo...> <mailto:jh...@jo... > <mailto:jh...@jo...>>> > >> > >> <mailto:jh...@jo... > <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>> > <mailto:jh...@jo... <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>>>> > >> > >> > <mailto:jh...@jo... > <mailto:jh...@jo...> > >> <mailto:jh...@jo... <mailto:jh...@jo...>> > >> > <mailto:jh...@jo... > <mailto:jh...@jo...> <mailto:jh...@jo... > <mailto:jh...@jo...>>> > >> <mailto:jh...@jo... <mailto:jh...@jo...> > <mailto:jh...@jo... <mailto:jh...@jo...>> > >> > <mailto:jh...@jo... > <mailto:jh...@jo...> <mailto:jh...@jo... > <mailto:jh...@jo...>>>>>>) > >> > >> kirjutas kuupäeval R, 30. juuli 2021 kell > >> > >> > 10:31: > >> > >> > > >> > >> > hi tarmo, hi eduardo - > >> > >> > > >> > >> > i wrote an email to the csoundqt dev > >> list. think this > >> > >> would be > >> > >> > great to > >> > >> > include in csoundqt 1.0.0. can you > >> help? the > >> > text below. > >> > >> > > >> > >> > i want to include "fox.wav" in > >> > >> Examples/Synths/ImitiativeAdditive.csd. > >> > >> > > >> > >> > what is the best way to achieve this? > >> > >> > > >> > >> > in the McCurdy and FLOSS examples, > i once > >> inserted the > >> > >> option: > >> > >> > > --env:SSDIR+=../SourceMaterials > >> > >> > > >> > >> > i tried the same here (locally, no > push to > >> git): > >> > >> > 1. i created a folder > "SourceMaterials" > >> in the > >> > examples/ > >> > >> directory, > >> > >> > with > >> > >> > fox.wav in it. > >> > >> > 2. i inserted this around line 4600 in > >> > src/qutecsound.cpp: > >> > >> > QStringList sourceMaterials; > >> > >> > sourceMaterials << > >> > >> ":/examples/SourceMaterials/fox.wav"; > >> > >> > subMenus << sourceMaterials; > >> > >> > subMenuNames << > >> tr("SourceMaterials"); > >> > >> > 3. and in application.qrc: > >> > >> > > <file>../examples/SourceMaterials/fox.wav</file> > >> > >> > > >> > >> > after recompiling, the folder > >> "SourceMaterials" > >> > shows up > >> > >> in the menu, > >> > >> > but the fox.wav is not found by csound. > >> > >> > > >> > >> > perhaps i forgot one step? > >> > >> > > >> > >> > but anyway, i think it is a nasty > way to do > >> it. > >> > so back > >> > >> to the > >> > >> > question > >> > >> > above: how can it be done better, > properly? > >> > >> > > >> > >> > cheers - > >> > >> > joachim > >> > >> > > >> > >> > >> > > >> > > >> > _______________________________________________ > >> > Qutecsound-devel mailing list > >> > Qut...@li... > <mailto:Qut...@li...> > >> <mailto:Qut...@li... > <mailto:Qut...@li...>> > >> > <mailto:Qut...@li... > <mailto:Qut...@li...> > >> <mailto:Qut...@li... > <mailto:Qut...@li...>>> > >> > > https://lists.sourceforge.net/lists/listinfo/qutecsound-devel > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel> > >> > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel>> > >> > > >> <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel> > >> > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel>>> > >> > > >> > > > > > > _______________________________________________ > > Qutecsound-devel mailing list > > Qut...@li... > <mailto:Qut...@li...> > > https://lists.sourceforge.net/lists/listinfo/qutecsound-devel > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel> > > > _______________________________________________ > Qutecsound-devel mailing list > Qut...@li... > <mailto:Qut...@li...> > https://lists.sourceforge.net/lists/listinfo/qutecsound-devel > <https://lists.sourceforge.net/lists/listinfo/qutecsound-devel> > |
