quickfixj-users — General mailing list for QuickFIX/J topics.

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

hi Toli

I have managed to run the sessions on both sides,,now I wanna send a logon
message to the server,,,how can I do that??

thanks...


On 1/30/07, Toli Kuznets <to...@ma...> wrote:
>
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> Mohammad,
>
> sure, i can help you out. Looking at your config file, it seems that
> you are missing 2 things:
> a. you don't have a BeginString. here's an example for FIX 4.2 begin
> string:
> BeginString=FIX.4.2
> b. You have a senderCompID but you don't have a targetID
> The sessionID is a triple of {begin string, senderCompID, targetCompID}
> That's probably why you can't send anything.
>
> If this doesn't help, do the following:
> 1. open up the QuickfixJ config files and make sure that you have
> serverCompID and targetCompID reversed in the corresponding configs:
> [session]
> BeginString=FIX.4.2
> SenderCompID=sender
> TargetCompID=exchange
>
> and on the server side:
> [session]
> BeginString=FIX.4.2
> SenderCompID=exchange
> TargetCompID=server
>
> 2. Run the client and pipe it to a log file
> %> runclient.sh | tee client.out
>
> 3. run the server and pipe that to a log file too:
> %> runserver.sh | tee server.out
>
> 4. send both the client/server configs and the logs (with the
> stacktrace for the session not found exception) and we should be able
> to help you.
>
> hope this helps
>
> On 1/30/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> > QuickFIX/J Documentation:
> > http://www.quickfixj.org/documentation/
> > QuickFIX/J Support: http://www.quickfixj.org/support/
> >
> >
> > Hi Toli
> >
> > You have been helping me out a lot,,thanks friend but I'm still stuck...
> >
> > I can send you the config file I'm using on the client side,coz I'm
> getting
> > the SessionNotFound exception on the same side,,secondly I'm not
> maintaining
> > any logs for the time being,,what I wanna do is to send a logon message
> to
> > the server,,hope you can help me out,,,,Apart from this,,how can I match
> the
> > sessionID on both sides??
> >
> >
> >
> > Thanks in advance for ur help,,,
> >
> >
> >
> > On 1/29/07, Toli Kuznets <to...@ma...> wrote:
> > > QuickFIX/J Documentation:
> > http://www.quickfixj.org/documentation/
> > > QuickFIX/J Support: http://www.quickfixj.org/support/
> > > Mohammad,
> > >
> > > Are you still having issues or have you managed to get past this
> problem?
> > > If you are, send the log from the client-side app that's having a
> > > problem and we can take a look at it, and include the config files for
> > > both the client and the server side, and the log from the server.
> > >
> > > Essentially, you need to make sure that you are correctly matching the
> > > sender/targetCompIDs on both sides.
> > > Also, you may want to check that when you call to
> > > Session.sendToTarget() the sessionID you are passing in is the same
> > > session that's declared in your config file.
> > >
> > > toli
> > >
> > > On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> > > > QuickFIX/J Documentation:
> > > > http://www.quickfixj.org/documentation/
> > > > QuickFIX/J Support: http://www.quickfixj.org/support/
> > > >
> > > >
> > > > I have managed to remove this exception but am getting the
> > SessionNotFound
> > > > exception on client side??can u plz help??
> > > >
> > >
> > >
> >
> -------------------------------------------------------------------------
> > > Take Surveys. Earn Cash. Influence the Future of IT
> > > Join SourceForge.net's Techsay panel and you'll get the chance to
> share
> > your
> > > opinions on IT & business topics through brief surveys - and earn cash
> > >
> >
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > > _______________________________________________
> > > Quickfixj-users mailing list
> > > Qui...@li...
> > >
> > https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> > >
> >
> >
> >
> -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> > opinions on IT & business topics through brief surveys - and earn cash
> >
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> >
> > _______________________________________________
> > Quickfixj-users mailing list
> > Qui...@li...
> > https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> >
> >
> >
> >
>
>
> --
> Toli Kuznets
> http://www.marketcetera.com: Open-Source Trading Platform
> download.run.trade.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

IyBkZWZhdWx0IHNldHRpbmdzIGZvciBzZXNzaW9ucw0KICBbREVGQVVMVF0NCg0KICBDb25uZWN0
aW9uVHlwZT1pbml0aWF0b3INCiAgU29ja2V0Q29ubmVjdFBvcnQ9OTg4Ng0KICBTb2NrZXRDb25u
ZWN0SG9zdD0xMC4wLjAuMg0KDQpbc2Vzc2lvbl0NCiAgDQogIEJlZ2luU3RyaW5nPUZJWC40LjEN
CiAgU2VuZGVyQ29tcElEPXNlbmRlcg0KICBUYXJnZXRDb21wSUQ9ZXhjaGFuZ2UNCiAgU3RhcnRU
aW1lPTAwOjAwOjAwDQogIEVuZFRpbWU9MDA6MDowMA0KICANCiAg

Re: [Quickfixj-users] How to Create a Session??

[Toli K. <to...@ma...>]

Mohammad,

sure, i can help you out. Looking at your config file, it seems that
you are missing 2 things:
a. you don't have a BeginString. here's an example for FIX 4.2 begin string:
BeginString=FIX.4.2
b. You have a senderCompID but you don't have a targetID
The sessionID is a triple of {begin string, senderCompID, targetCompID}
That's probably why you can't send anything.

If this doesn't help, do the following:
1. open up the QuickfixJ config files and make sure that you have
serverCompID and targetCompID reversed in the corresponding configs:
[session]
BeginString=FIX.4.2
SenderCompID=sender
TargetCompID=exchange

and on the server side:
[session]
BeginString=FIX.4.2
SenderCompID=exchange
TargetCompID=server

2. Run the client and pipe it to a log file
%> runclient.sh | tee client.out

3. run the server and pipe that to a log file too:
%> runserver.sh | tee server.out

4. send both the client/server configs and the logs (with the
stacktrace for the session not found exception) and we should be able
to help you.

hope this helps

On 1/30/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> QuickFIX/J Documentation:
> http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
>
>
> Hi Toli
>
> You have been helping me out a lot,,thanks friend but I'm still stuck...
>
> I can send you the config file I'm using on the client side,coz I'm getting
> the SessionNotFound exception on the same side,,secondly I'm not maintaining
> any logs for the time being,,what I wanna do is to send a logon message to
> the server,,hope you can help me out,,,,Apart from this,,how can I match the
> sessionID on both sides??
>
>
>
> Thanks in advance for ur help,,,
>
>
>
> On 1/29/07, Toli Kuznets <to...@ma...> wrote:
> > QuickFIX/J Documentation:
> http://www.quickfixj.org/documentation/
> > QuickFIX/J Support: http://www.quickfixj.org/support/
> > Mohammad,
> >
> > Are you still having issues or have you managed to get past this problem?
> > If you are, send the log from the client-side app that's having a
> > problem and we can take a look at it, and include the config files for
> > both the client and the server side, and the log from the server.
> >
> > Essentially, you need to make sure that you are correctly matching the
> > sender/targetCompIDs on both sides.
> > Also, you may want to check that when you call to
> > Session.sendToTarget() the sessionID you are passing in is the same
> > session that's declared in your config file.
> >
> > toli
> >
> > On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> > > QuickFIX/J Documentation:
> > > http://www.quickfixj.org/documentation/
> > > QuickFIX/J Support: http://www.quickfixj.org/support/
> > >
> > >
> > > I have managed to remove this exception but am getting the
> SessionNotFound
> > > exception on client side??can u plz help??
> > >
> >
> >
> -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> > opinions on IT & business topics through brief surveys - and earn cash
> >
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > _______________________________________________
> > Quickfixj-users mailing list
> > Qui...@li...
> >
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> >
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>
>
>
>


-- 
Toli Kuznets
http://www.marketcetera.com: Open-Source Trading Platform
download.run.trade.

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

IyBkZWZhdWx0IHNldHRpbmdzIGZvciBzZXNzaW9ucw0KICBbREVGQVVMVF0NCiAgQ29ubmVjdGlv
blR5cGU9aW5pdGlhdG9yDQogIFJlY29ubmVjdEludGVydmFsPTYwDQogIFNlbmRlckNvbXBJRD1T
ZW5kZXJDb21wDQogIFNvY2tldENvbm5lY3RQb3J0PTk4ODANCiAgU29ja2V0Q29ubmVjdEhvc3Q9
MTAuMC4wLjINCiAgU3RhcnRUaW1lPTAwOjAwOjAwDQogIEVuZFRpbWU9MDA6MDowMA0KICANCiAg

Re: [Quickfixj-users] How to Create a Session??

[Toli K. <to...@ma...>]

Mohammad,

Are you still having issues or have you managed to get past this problem?
If you are, send the log from the client-side app that's having a
problem and we can take a look at it, and include the config files for
both the client and the server side, and the log from the server.

Essentially, you need to make sure that you are correctly matching the
sender/targetCompIDs on both sides.
Also, you may want to check that when you call to
Session.sendToTarget() the sessionID you are passing in is the same
session that's declared in your config file.

toli

On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> QuickFIX/J Documentation:
> http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
>
>
> I have managed to remove this exception but am getting the SessionNotFound
> exception on client side??can u plz help??
>

[Quickfixj-users] multiple SocketInitiator in the same java vm, possible trouble?

[Marilen C. <mar...@ne...>]

Hello,

I am preparing to integrate an open fix based service in a more complex
J2EE application which runs in JBoss. My application will consist of
several Initiators to different markets. I was able to do all initial
tests, connect, send and receive messages using simple separated
applications but now I need to integrate with the J2EE application. I
will be using a system in which each session will need be managed
separately (start, stop, enable, configure). As far as I understand the
architecture, the *SocketInitiator as implemented in the initialize
function connects to all the session at the same time and then uses
either multiple threads or a single thread to handle the connections. I
was thinking to use a different SocketInitiator, with a different
configuration file for each of my sessions. Can this cause any problems
(threadsafe !?) as all the code will run in the same JVM? Has anyone
used something similar? Or maybe I have missed some session management
functionality in the openfix itself?

Thank you in advance for you help,
Best Regards,
Len
www.len.ro

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

I have managed to remove this exception but am getting the SessionNotFound
exception on client side??can u plz help??




On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
>
>
> Thanks fellows,,,now my Server is running fine exception free,,,
>
> Just when the client connects to the server I get the following
> exception,,
>
>
> Jan 26, 2007 3:32:25 PM quickfix.mina.AbstractIoHandler exceptionCaught
>
> SEVERE: socket exception (/10.0.0.1:2125): An existing connection was
> forcibly closed by the remote host
> please help here....
>
>
> On 1/26/07, Martin Ellis <me...@sc...> wrote:
> >
> > QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> > QuickFIX/J Support: http://www.quickfixj.org/support/
> > On 26/01/2007 09:57, Mohammad Kamran Liaqat wrote:
> > > Thanks Martin but I'm getting the follwoing exception now,
> > >
> > > quickfix.ConfigError: No acceptor sessions found in settings
> > >
> > > Of course there's something wrong with my config file named
> > > settings.txt,,here it is:-
> > >
> > > # default settings for sessions
> > >   [DEFAULT]
> > >   ConnectionType=initator
> >
> > There's your clue - you're trying to use a config file for
> > something that initiates FIX connections for the executor,
> > which is supposed to accept FIX connections.
> >
> > Use the executor.cfg file with the executor, and the
> > banzai.cfg with banzai, and refer back to what Toli said
> > about SocketInitiator and SocketAcceptor when you're looking
> > at the code.
> >
> > Martin
> >
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > your
> > opinions on IT & business topics through brief surveys - and earn cash
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> >
> > _______________________________________________
> > Quickfixj-users mailing list
> > Qui...@li...
> > https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> >
>
>

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

Thanks fellows,,,now my Server is running fine exception free,,,

Just when the client connects to the server I get the following exception,,


Jan 26, 2007 3:32:25 PM quickfix.mina.AbstractIoHandler exceptionCaught

SEVERE: socket exception (/10.0.0.1:2125): An existing connection was
forcibly closed by the remote host
please help here....


On 1/26/07, Martin Ellis <me...@sc...> wrote:
>
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> On 26/01/2007 09:57, Mohammad Kamran Liaqat wrote:
> > Thanks Martin but I'm getting the follwoing exception now,
> >
> > quickfix.ConfigError: No acceptor sessions found in settings
> >
> > Of course there's something wrong with my config file named
> > settings.txt,,here it is:-
> >
> > # default settings for sessions
> >   [DEFAULT]
> >   ConnectionType=initator
>
> There's your clue - you're trying to use a config file for
> something that initiates FIX connections for the executor,
> which is supposed to accept FIX connections.
>
> Use the executor.cfg file with the executor, and the
> banzai.cfg with banzai, and refer back to what Toli said
> about SocketInitiator and SocketAcceptor when you're looking
> at the code.
>
> Martin
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>

Re: [Quickfixj-users] How to Create a Session??

[Shepheard, T. \(London\) <Tob...@ml...>]

Meh - Just saw Martin's email, hadn't realised you were trying to start
up as an acceptor. So like Martin says, you need
"ConnectionType=3Dacceptor" and you will need SocketAcceptPort and
Address, but not SocketConnect ones. If you use the example configs with
the relevant apps then you should be good.
=20
I should read the whole thread before I start replying :(
=20
Toby

	-----Original Message-----
	From: qui...@li...
[mailto:qui...@li...] On Behalf Of
Shepheard, Toby (London)
	Sent: 26 January 2007 10:25
	To: qui...@li...
	Subject: Re: [Quickfixj-users] How to Create a Session??
=09
=09
	Looks like there's a typo in the example settings file, it's
missing an "i" in initiator.
	=20
	ConnectionType=3Dinitator
	=20
	should be
	=20
	ConnectionType=3Dinitiator
	=20
	Also, if you are connecting as an initiator, then you should NOT
be specifying a SocketAcceptPort or Address, so remove those new
entries. Actually, just remove all the new entries you just added in
your last email, unless you know you need them - the defaults are fine
for 90% of the time.
	=20
	Don't forget to change the path to the DataDictionary to point
to the real data dictionary.=20
=09
=09

		-----Original Message-----
		From: qui...@li...
[mailto:qui...@li...] On Behalf Of
Mohammad Kamran Liaqat
		Sent: 26 January 2007 10:12
		To: qui...@li...
		Subject: Re: [Quickfixj-users] How to Create a Session??
	=09
	=09
		I have added the following entries into the config file
now but still am getting the same exception:-
		=20

			SocketAcceptPort=3D4465=20

			SocketAcceptAddress=3D10.0.0.1=20

			RefreshMessageStoreAtLogon=3DN=20

			SocketKeepAlive=3DY

			SocketOobInline=3DY

			SocketReceiveBufferSize=3D1000

			SocketReuseAddress=3DY

			SocketSendBufferSize=3D10000

			SocketLinger=3D100

			SocketTcpNoDelay=3DY

			SocketTrafficClass=3D0

		plz help.........
	=09
		=20
		On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...>
wrote:=20

			Thanks Martin but I'm getting the follwoing
exception now,
			=20

				quickfix.ConfigError: No acceptor
sessions found in settings

				Of course there's something wrong with
my config file named settings.txt,,here it is:-

				# default settings for sessions
				  [DEFAULT]
				  ConnectionType=3Dinitator
				  ReconnectInterval=3D60
				  SenderCompID=3DTW
				  SocketConnectPort=3D4464
				  SocketConnectHost=3D 10.0.0.2
<http://10.0.0.2/>=20

			=09
				  # session definition
				  [SESSION]
				  # inherit ConnectionType,
ReconnectInterval and SenderCompID from default

				  BeginString=3DFIX.4.1
				  TargetCompID=3DARCA
				  StartTime=3D12:30:00
				  EndTime=3D23:30:00
				  HeartBtInt=3D20
				  SocketConnectPort=3D4460
				  SocketConnectHost=3D 10.0.0.2
<http://10.0.0.2/>=20
				  DataDictionary=3Dsomewhere/FIX41.xml=20

			=09
				  can u plz help??


		=09
			On 1/26/07, Martin Ellis
<me...@sc... > wrote:=20

				QuickFIX/J Documentation:
http://www.quickfixj.org/documentation/=20
				QuickFIX/J Support:
http://www.quickfixj.org/support/
				On 26/01/2007 09:44, Mohammad Kamran
Liaqat wrote:
				> Thanks bundles Toli but I'm not
finished yet,hope u can help me more.=20
				> When I try to run the Application on
the Server, it gives me an
				> exception namely,=20
				>
				> Exception in thread "main"
java.lang.NoClassDefFoundError:
				>
edu/emory/mathcs/backport/java/util/concurrent/ThreadFactory=20
			=09
				You need the jars in
quickfixj/core/src/main/lib in your
				classpath.
			=09
				Martin
			=09
=09
------------------------------------------------------------------------
-
				Take Surveys. Earn Cash. Influence the
Future of IT=20
				Join SourceForge.net's Techsay panel and
you'll get the chance to share your=20
				opinions on IT & business topics through
brief surveys - and earn cash
=09
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
=09
_______________________________________________
				Quickfixj-users mailing list
				Qui...@li...
=09
https://lists.sourceforge.net/lists/listinfo/quickfixj-users=20
			=09



  _____ =20

	If you are not an intended recipient of this e-mail, please
notify the sender, delete it and do not read, act upon, print, disclose,
copy, retain or redistribute it. Click here
<http://www.ml.com/email_terms/> for important additional terms relating
to this e-mail.     http://www.ml.com/email_terms/
  _____ =20

Re: [Quickfixj-users] How to Create a Session??

[Shepheard, T. \(London\) <Tob...@ml...>]

Looks like there's a typo in the example settings file, it's missing an
"i" in initiator.
=20
ConnectionType=3Dinitator
=20
should be
=20
ConnectionType=3Dinitiator
=20
Also, if you are connecting as an initiator, then you should NOT be
specifying a SocketAcceptPort or Address, so remove those new entries.
Actually, just remove all the new entries you just added in your last
email, unless you know you need them - the defaults are fine for 90% of
the time.
=20
Don't forget to change the path to the DataDictionary to point to the
real data dictionary.=20



	-----Original Message-----
	From: qui...@li...
[mailto:qui...@li...] On Behalf Of
Mohammad Kamran Liaqat
	Sent: 26 January 2007 10:12
	To: qui...@li...
	Subject: Re: [Quickfixj-users] How to Create a Session??
=09
=09
	I have added the following entries into the config file now but
still am getting the same exception:-
	=20

		SocketAcceptPort=3D4465=20

		SocketAcceptAddress=3D10.0.0.1=20

		RefreshMessageStoreAtLogon=3DN=20

		SocketKeepAlive=3DY

		SocketOobInline=3DY

		SocketReceiveBufferSize=3D1000

		SocketReuseAddress=3DY

		SocketSendBufferSize=3D10000

		SocketLinger=3D100

		SocketTcpNoDelay=3DY

		SocketTrafficClass=3D0

	plz help.........
=09
	=20
	On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:=20

		Thanks Martin but I'm getting the follwoing exception
now,
		=20

			quickfix.ConfigError: No acceptor sessions found
in settings

			Of course there's something wrong with my config
file named settings.txt,,here it is:-

			# default settings for sessions
			  [DEFAULT]
			  ConnectionType=3Dinitator
			  ReconnectInterval=3D60
			  SenderCompID=3DTW
			  SocketConnectPort=3D4464
			  SocketConnectHost=3D 10.0.0.2 <http://10.0.0.2/>


		=09
			  # session definition
			  [SESSION]
			  # inherit ConnectionType, ReconnectInterval
and SenderCompID from default

			  BeginString=3DFIX.4.1
			  TargetCompID=3DARCA
			  StartTime=3D12:30:00
			  EndTime=3D23:30:00
			  HeartBtInt=3D20
			  SocketConnectPort=3D4460
			  SocketConnectHost=3D 10.0.0.2 <http://10.0.0.2/>

			  DataDictionary=3Dsomewhere/FIX41.xml=20

		=09
			  can u plz help??


	=09
		On 1/26/07, Martin Ellis <me...@sc... >
wrote:=20

			QuickFIX/J Documentation:
http://www.quickfixj.org/documentation/=20
			QuickFIX/J Support:
http://www.quickfixj.org/support/
			On 26/01/2007 09:44, Mohammad Kamran Liaqat
wrote:
			> Thanks bundles Toli but I'm not finished
yet,hope u can help me more.=20
			> When I try to run the Application on the
Server, it gives me an
			> exception namely,=20
			>
			> Exception in thread "main"
java.lang.NoClassDefFoundError:
			>
edu/emory/mathcs/backport/java/util/concurrent/ThreadFactory=20
		=09
			You need the jars in quickfixj/core/src/main/lib
in your
			classpath.
		=09
			Martin
		=09
=09
------------------------------------------------------------------------
-
			Take Surveys. Earn Cash. Influence the Future of
IT=20
			Join SourceForge.net's Techsay panel and you'll
get the chance to share your=20
			opinions on IT & business topics through brief
surveys - and earn cash
=09
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
			_______________________________________________
			Quickfixj-users mailing list
			Qui...@li...
=09
https://lists.sourceforge.net/lists/listinfo/quickfixj-users
--------------------------------------------------------

If you are not an intended recipient of this e-mail, please notify the =
sender, delete it and do not read, act upon, print, disclose, copy, =
retain or redistribute it. Click here for important additional terms =
relating to this e-mail.     http://www.ml.com/email_terms/
--------------------------------------------------------

Re: [Quickfixj-users] How to Create a Session??

[Martin E. <me...@sc...>]

On 26/01/2007 09:57, Mohammad Kamran Liaqat wrote:
> Thanks Martin but I'm getting the follwoing exception now,
> 
> quickfix.ConfigError: No acceptor sessions found in settings
> 
> Of course there's something wrong with my config file named 
> settings.txt,,here it is:-
> 
> # default settings for sessions
>   [DEFAULT]
>   ConnectionType=initator

There's your clue - you're trying to use a config file for 
something that initiates FIX connections for the executor,
which is supposed to accept FIX connections.

Use the executor.cfg file with the executor, and the 
banzai.cfg with banzai, and refer back to what Toli said 
about SocketInitiator and SocketAcceptor when you're looking 
at the code.

Martin

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

I have added the following entries into the config file now but still am
getting the same exception:-


SocketAcceptPort=4465

SocketAcceptAddress=10.0.0.1

RefreshMessageStoreAtLogon=N

SocketKeepAlive=Y

SocketOobInline=Y

SocketReceiveBufferSize=1000

SocketReuseAddress=Y

SocketSendBufferSize=10000

SocketLinger=100

SocketTcpNoDelay=Y

SocketTrafficClass=0
plz help.........


On 1/26/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
>
> Thanks Martin but I'm getting the follwoing exception now,
>
>
> quickfix.ConfigError: No acceptor sessions found in settings
>
> Of course there's something wrong with my config file named settings.txt,,here
> it is:-
>
> # default settings for sessions
>   [DEFAULT]
>   ConnectionType=initator
>   ReconnectInterval=60
>   SenderCompID=TW
>   SocketConnectPort=4464
>   SocketConnectHost=10.0.0.2
>
>
>   # session definition
>   [SESSION]
>   # inherit ConnectionType, ReconnectInterval and SenderCompID from
> default
>
>   BeginString=FIX.4.1
>   TargetCompID=ARCA
>   StartTime=12:30:00
>   EndTime=23:30:00
>   HeartBtInt=20
>   SocketConnectPort=4460
>   SocketConnectHost=10.0.0.2
>   DataDictionary=somewhere/FIX41.xml
>
>
>   can u plz help??
>
>  On 1/26/07, Martin Ellis <me...@sc...> wrote:
> >
> > QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> > QuickFIX/J Support: http://www.quickfixj.org/support/
> > On 26/01/2007 09:44, Mohammad Kamran Liaqat wrote:
> > > Thanks bundles Toli but I'm not finished yet,hope u can help me more.
> > > When I try to run the Application on the Server, it gives me an
> > > exception namely,
> > >
> > > Exception in thread "main" java.lang.NoClassDefFoundError:
> > > edu/emory/mathcs/backport/java/util/concurrent/ThreadFactory
> >
> > You need the jars in quickfixj/core/src/main/lib in your
> > classpath.
> >
> > Martin
> >
> >
> > -------------------------------------------------------------------------
> > Take Surveys. Earn Cash. Influence the Future of IT
> > Join SourceForge.net's Techsay panel and you'll get the chance to share
> > your
> > opinions on IT & business topics through brief surveys - and earn cash
> >
> > http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> > _______________________________________________
> > Quickfixj-users mailing list
> > Qui...@li...
> > https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> >
>
>

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

Thanks Martin but I'm getting the follwoing exception now,


quickfix.ConfigError: No acceptor sessions found in settings

Of course there's something wrong with my config file named settings.txt,,here
it is:-

# default settings for sessions
  [DEFAULT]
  ConnectionType=initator
  ReconnectInterval=60
  SenderCompID=TW
  SocketConnectPort=4464
  SocketConnectHost=10.0.0.2


  # session definition
  [SESSION]
  # inherit ConnectionType, ReconnectInterval and SenderCompID from default

  BeginString=FIX.4.1
  TargetCompID=ARCA
  StartTime=12:30:00
  EndTime=23:30:00
  HeartBtInt=20
  SocketConnectPort=4460
  SocketConnectHost=10.0.0.2
  DataDictionary=somewhere/FIX41.xml


  can u plz help??
On 1/26/07, Martin Ellis <me...@sc...> wrote:
>
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> On 26/01/2007 09:44, Mohammad Kamran Liaqat wrote:
> > Thanks bundles Toli but I'm not finished yet,hope u can help me more.
> > When I try to run the Application on the Server, it gives me an
> > exception namely,
> >
> > Exception in thread "main" java.lang.NoClassDefFoundError:
> > edu/emory/mathcs/backport/java/util/concurrent/ThreadFactory
>
> You need the jars in quickfixj/core/src/main/lib in your
> classpath.
>
> Martin
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>

Re: [Quickfixj-users] How to Create a Session??

[Martin E. <me...@sc...>]

On 26/01/2007 09:44, Mohammad Kamran Liaqat wrote:
> Thanks bundles Toli but I'm not finished yet,hope u can help me more.
> When I try to run the Application on the Server, it gives me an 
> exception namely,
> 
> Exception in thread "main" java.lang.NoClassDefFoundError: 
> edu/emory/mathcs/backport/java/util/concurrent/ThreadFactory

You need the jars in quickfixj/core/src/main/lib in your 
classpath.

Martin

Re: [Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

Thanks bundles Toli but I'm not finished yet,hope u can help me more.
When I try to run the Application on the Server, it gives me an exception
namely,



Exception in thread "main" java.lang.NoClassDefFoundError:
edu/emory/mathcs/backport/java/util/concurrent/ThreadFactory

hope u can respond........




On 1/26/07, Toli Kuznets <to...@ma...> wrote:
>
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> Mohammad,
>
> When you talk client and server, in QuickfixJ terminology that would
> be an app with a SocketInitiator and a SocketAcceptor respectively.
>
> There are some examples in the QFJ examples/ subdirectory. The config
> files QFJ uses right now are text-files. The ordermatch example shows
> what a "server", ie an acceptor looks like, while the banzai example
> shows you a client, ie an initiator.
> You can see the examples here:
>
> http://quickfixj.svn.sourceforge.net/viewvc/quickfixj/trunk/examples/src/main/java/quickfix/examples/
> Each directory has a .cfg file that's used for the configuration of
> QFJ for that example.
>
> You are welcome to take a look at our Marketcetera Platform
> application for a more complex example as well.
> The OMS acts as a "client", it has a SocketInitator that we use to
> connect to a FIX engine (which can be the ordermatch example). Version
> 0.1.4 of our platform was using basic text files for configurations,
> but we have switched to Spring for the current 0.2 release.
> You can see how to get the code here:
> http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/BuildingPlatform
>
>
> hope this helps.
> On 1/25/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> > Hi
> >
> > How do I create a session on the server machine??Do I also need to
> create a
> > session on the client side, sample code would be highly
> appreciated.Moreover
> > where to find the configuration file for quickfixj,,
> >
> > Thanks
>
> --
> Toli Kuznets
> http://www.marketcetera.com: Open-Source Trading Platform
> download.run.trade.
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share
> your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>

Re: [Quickfixj-users] How to Create a Session??

[Toli K. <to...@ma...>]

Mohammad,

When you talk client and server, in QuickfixJ terminology that would
be an app with a SocketInitiator and a SocketAcceptor respectively.

There are some examples in the QFJ examples/ subdirectory. The config
files QFJ uses right now are text-files. The ordermatch example shows
what a "server", ie an acceptor looks like, while the banzai example
shows you a client, ie an initiator.
You can see the examples here:
http://quickfixj.svn.sourceforge.net/viewvc/quickfixj/trunk/examples/src/main/java/quickfix/examples/
Each directory has a .cfg file that's used for the configuration of
QFJ for that example.

You are welcome to take a look at our Marketcetera Platform
application for a more complex example as well.
The OMS acts as a "client", it has a SocketInitator that we use to
connect to a FIX engine (which can be the ordermatch example). Version
0.1.4 of our platform was using basic text files for configurations,
but we have switched to Spring for the current 0.2 release.
You can see how to get the code here:
http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/BuildingPlatform


hope this helps.
On 1/25/07, Mohammad Kamran Liaqat <kam...@gm...> wrote:
> Hi
>
> How do I create a session on the server machine??Do I also need to create a
> session on the client side, sample code would be highly appreciated.Moreover
> where to find the configuration file for quickfixj,,
>
> Thanks

-- 
Toli Kuznets
http://www.marketcetera.com: Open-Source Trading Platform
download.run.trade.

[Quickfixj-users] How to Create a Session??

[Mohammad K. L. <kam...@gm...>]

Hi

How do I create a session on the server machine??Do I also need to create a
session on the client side, sample code would be highly
appreciated.Moreover where
to find the configuration file for quickfixj,,

Thanks

Re: [Quickfixj-users] Sample POJO Fix Application for generatingload

[Toli K. <to...@ma...>]

Stephen,

As i mentioned before, if all you need are ways to generate orders
w/out validating any of the messages coming back, then you can use our
OrderLoader tool.
If you are interested, let me know and I can work with you on getting
that set up.

If you need additional verification, or if the
Orderloader/Marketcetera OMS is too much overhead for you, then sorry,
i don't know of anything else. You may be able to look at the
OrderLoader source code to re-purpose it for your goals though if you
can point it directly at some target instead of Marketcetera OMS.
http://trac.marketcetera.org/trac.fcgi/browser/platform/trunk/orderloader

hope this helps.

On 1/20/07, Stephen Leung <st...@be...> wrote:
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> Thanks for the response. I am looking for a simple non-GUI Quickfix/J client sample that I can use to create IOI and Pricing traffic for Forex.
>
> Grinder is an open source load tool similar to Mercury Load Runner.

Re: [Quickfixj-users] Deploying QuickFIX/J in or alongside Java EEcontainer

[Brad H. <Bra...@gb...>]

Hi Martin,

Sorry for the delayed response.  I see from other replies that you're
going down the separate process track but I thought I'd post anyway.

We run quickfix in Jboss 4.  It is deployed as a servlet using a
ContextListener to manage lifecycle in the way that you described - I've
found this to be a reliable, portable way to marry background processes
and EJBs.  Communication with other EJB components is by serialized
quickfix.Message over JMS.

Regards,
Brad.

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of
Martin Ellis
Sent: Thursday, 11 January 2007 7:52 PM
To: qui...@li...
Subject: [Quickfixj-users] Deploying QuickFIX/J in or alongside Java
EEcontainer

QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
QuickFIX/J Support: http://www.quickfixj.org/support/ Hi,

I'm looking for suggestions about ways to run a FIX engine such that it
can be used from a web application in a Java EE container.  The aim
being to have a web page that allows FIX messages to be sent, and
received messages to be displayed.

Here are my notes on the advantages (+) and disadvantages (-) of the
different approaches I've considered so far:

* Run the FIX engine in a separate process

  + Life cycle of FIX engine is independent of application container.
  - Complexity due to IPC mechanism required to pass messages between
    app server and FIX engine.
  - QuickFIX/J seems to have no means for marshalling messages in this
    way.

* Run the FIX engine as an EJB:
Caveat: I've never used EJBs before.

  + Simpler deployment than using a separate process
  - I'm not clear whether the EJB lifecycle supports 'always on'
    services as would be required by a FIX engine.

* Run the FIX engine in a servlet container, using a ContextListener to
manage its lifecycle.
In this method, initiator.start() would be called in a
contextInitialized() method, and initiator.stop() would be called in a
contextDestroyed() method().

  + Simple deployment.
  + FIX engine life cycle determined by that of application container.
  - Doesn't seem conceptually right to run a FIX engine in a container
    designed for running servlets.

Has anyone tried such a deployment before?
Could anyone offer any experience about what works well, and what to
avoid here?

TIA for any advice offered,
Martin

------------------------------------------------------------------------
-
Take Surveys. Earn Cash. Influence the Future of IT Join
SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDE
V
_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

Re: [Quickfixj-users] Sample POJO Fix Application for generatingload

[Stephen L. <st...@be...>]

Thanks for the response. I am looking for a simple non-GUI Quickfix/J clien=
t sample that I can use to create IOI and Pricing traffic for Forex.
=20
Grinder is an open source load tool similar to Mercury Load Runner.
=20
Thanks,
Steve
=20
Stephen Leung
Senior Manager - BEA Financial Services
Phone: 917.542.5807
ste...@be...
=20
BEA Systems, Inc.
New York City, USA=20
335 Madison Avenue=20
New York, NY 10017=20
Fax: 917.542.5901
http://www.bea.com/ <https://connect.bea.com/exchweb/bin/redir.asp,DanaInfo=
=3Dussjfe01.bea.com,SSL+?URL=3Dhttp://www.bea.com/>=20

________________________________

From: qui...@li... on behalf of Toli Kuzne=
ts
Sent: Fri 1/19/2007 5:30 PM
To: qui...@li...
Subject: Re: [Quickfixj-users] Sample POJO Fix Application for generatinglo=
ad



QuickFIX/J Documentation: http://www.quickfixj.org/documentation/ <https://=
connect.bea.com/documentation/,DanaInfo=3Dwww.quickfixj.org+>=20
QuickFIX/J Support: http://www.quickfixj.org/support/ <https://connect.bea.=
com/support/,DanaInfo=3Dwww.quickfixj.org+>=20
Stephen,

What kind of client exactly are you looking for? I'm not familiar with
Grinder so i'm not sure if you need command-line or GUI-driven.

What kind of input/ouput are you looking for? Are you thinking of
feeding a bunch of flat files with orders and generating all of your
traffic from that? What particular load characteristics are you
looking to generate?  do you need it to check results as well, or just
to generate traffic?

We have an "order-loader" tool that's part of our platform that may do
the trick. While not exactly a straight POJO model, you can point it
to a set of text files and it generates orders from that.
It's currently setup to send orders to our Marketcetera OMS, but it
may be modified in a fairly straight-forward way to send traffic
somewhere else.
Here's more info on our orderloader (it's free):
http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/OrderLoader <https=
://connect.bea.com/trac.fcgi/wiki/Marketcetera/OrderLoader,DanaInfo=3Dtrac.=
marketcetera.org+>=20

hope this helps,

toli

On 1/19/07, Stephen Leung <st...@be...> wrote:
>
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/ <https:=
//connect.bea.com/documentation/,DanaInfo=3Dwww.quickfixj.org+>=20
> QuickFIX/J Support: http://www.quickfixj.org/support/ <https://connect.be=
a.com/support/,DanaInfo=3Dwww.quickfixj.org+>=20
>
>
>
>
>
>
> Does anyone have a sample java client example for Quickfix/J that can be =
attached to a load tool like Grinder to create FIX message load?
>
>
>
> The Banzai example seems to use an asynchronous model.
>
>
>
> Thanks in advance,
>
> Steve
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Stephen      Leung
>      Senior Manager - BEA Financial Services
>      Phone: 917.542.5807
>      ste...@be...
>
>
>
> BEA Systems, Inc.
>  New York City,     USA
>      335 Madison Avenue
>      New York, NY 10017
>      Fax: 917.542.5901
>      http://www.bea.com/ <https://connect.bea.com/,DanaInfo=3Dwww.bea.com=
+>=20
>
>
>
>
>
>
>
>
>
>
>
> This message is intended only for the use of the       individual or enti=
ty to which it is addressed and may contain information       that is privi=
leged, confidential and exempt from disclosure under       applicable law. =
If the reader of this message is not the intended       recipient, or the e=
mployee or agent responsible for delivering the       message to the intend=
ed recipient, you are hereby notified that any       dissemination, distrib=
ution or copying of this communication is strictly       prohibited. If you=
 have received this communication in error, please       delete it and noti=
fy us immediately.
>
>
>
>
>
>
>
>         _________________________________________________________________=
______
> Notice:  This email message, together with any attachments, may contain
> information  of  BEA Systems,  Inc.,  its subsidiaries  and  affiliated
> entities,  that may be confidential,  proprietary,  copyrighted  and/or
> legally privileged, and is intended solely for the use of the individual
> or entity named in this message. If you are not the intended recipient,
> and have received this message in error, please immediately return this
> by email and then delete it.
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share y=
our
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3D=
DEVDEV <https://connect.bea.com/default.php,DanaInfo=3Dwww.techsay.com+?pag=
e=3Djoin.php&p=3Dsourceforge&CID=3DDEVDEV>=20
>
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users <https://con=
nect.bea.com/lists/listinfo/quickfixj-users,DanaInfo=3Dlists.sourceforge.ne=
t,SSL+>=20
>
>
>
>



--
Toli Kuznets
http://www.marketcetera.com: Open-Source Trading Platform
download.run.trade.

-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys - and earn cash
http://www.techsay.com/default.php?page=3Djoin.php&p=3Dsourceforge&CID=3DDE=
VDEV <https://connect.bea.com/default.php,DanaInfo=3Dwww.techsay.com+?page=
=3Djoin.php&p=3Dsourceforge&CID=3DDEVDEV>=20
_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users <https://conne=
ct.bea.com/lists/listinfo/quickfixj-users,DanaInfo=3Dlists.sourceforge.net,=
SSL+>=20


_______________________________________________________________________
Notice:  This email message, together with any attachments, may contain
information  of  BEA Systems,  Inc.,  its subsidiaries  and  affiliated
entities,  that may be confidential,  proprietary,  copyrighted  and/or
legally privileged, and is intended solely for the use of the individual
or entity named in this message. If you are not the intended recipient,
and have received this message in error, please immediately return this
by email and then delete it.

Re: [Quickfixj-users] Sample POJO Fix Application for generating load

[Toli K. <to...@ma...>]

Stephen,

What kind of client exactly are you looking for? I'm not familiar with
Grinder so i'm not sure if you need command-line or GUI-driven.

What kind of input/ouput are you looking for? Are you thinking of
feeding a bunch of flat files with orders and generating all of your
traffic from that? What particular load characteristics are you
looking to generate?  do you need it to check results as well, or just
to generate traffic?

We have an "order-loader" tool that's part of our platform that may do
the trick. While not exactly a straight POJO model, you can point it
to a set of text files and it generates orders from that.
It's currently setup to send orders to our Marketcetera OMS, but it
may be modified in a fairly straight-forward way to send traffic
somewhere else.
Here's more info on our orderloader (it's free):
http://trac.marketcetera.org/trac.fcgi/wiki/Marketcetera/OrderLoader

hope this helps,

toli

On 1/19/07, Stephen Leung <st...@be...> wrote:
>
> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
>
>
>
>
>
>
> Does anyone have a sample java client example for Quickfix/J that can be attached to a load tool like Grinder to create FIX message load?
>
>
>
> The Banzai example seems to use an asynchronous model.
>
>
>
> Thanks in advance,
>
> Steve
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> Stephen      Leung
>      Senior Manager - BEA Financial Services
>      Phone: 917.542.5807
>      ste...@be...
>
>
>
> BEA Systems, Inc.
>  New York City,     USA
>      335 Madison Avenue
>      New York, NY 10017
>      Fax: 917.542.5901
>      http://www.bea.com/
>
>
>
>
>
>
>
>
>
>
>
> This message is intended only for the use of the       individual or entity to which it is addressed and may contain information       that is privileged, confidential and exempt from disclosure under       applicable law. If the reader of this message is not the intended       recipient, or the employee or agent responsible for delivering the       message to the intended recipient, you are hereby notified that any       dissemination, distribution or copying of this communication is strictly       prohibited. If you have received this communication in error, please       delete it and notify us immediately.
>
>
>
>
>
>
>
>         _______________________________________________________________________
> Notice:  This email message, together with any attachments, may contain
> information  of  BEA Systems,  Inc.,  its subsidiaries  and  affiliated
> entities,  that may be confidential,  proprietary,  copyrighted  and/or
> legally privileged, and is intended solely for the use of the individual
> or entity named in this message. If you are not the intended recipient,
> and have received this message in error, please immediately return this
> by email and then delete it.
>
>
> -------------------------------------------------------------------------
> Take Surveys. Earn Cash. Influence the Future of IT
> Join SourceForge.net's Techsay panel and you'll get the chance to share your
> opinions on IT & business topics through brief surveys - and earn cash
> http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
>
> _______________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>
>
>
>



-- 
Toli Kuznets
http://www.marketcetera.com: Open-Source Trading Platform
download.run.trade.

[Quickfixj-users] QuickFIX Presentation at JSIG London

[Colin C. <col...@me...>]

Hi,

I help run the London Java Special Interest Group, http://jsig.com. This
is a new website, JSIG has been running for about 5 years now but we've
not moved the history of presentations over to the new site yet.

I'm getting the schedule of presentations arranged for the coming year
and was wondering if either some QuickFIX/J users or developers are in
or visiting London at some point and would like to do a presentation. As
we're City based we get a lot of financial institution developers and
architects at the presentations.

Regards,

Colin.

[Quickfixj-users] Failing to invoke fromApp()

[Denis K. <d.k...@th...>]

I am running into a weird problem. There is one message type that when
received does not seem to invoke fromApp(). It's an Execution Report
(35=3D8). All other messages are processed fine. I see all IOI messages
coming in. When Execution Report comes in I see QuickFix logging the
incoming message. So it gets it but then there is no call made to the
fromApp(). The reason I know that no call was made is because the first
line in that method is a logger invocation that writes out the message
about to be processed. No log entry is made.=20

I feel like there is some kind of threading deadlock, but was unable to
find it. Since the fromApp() is not synchronized I do not see a reason
why it would not be making a log entry unless the call to it is made
from the synchronized block. Has anyone encountered something like this?
Any ideas will be greatly appreciated!

=20

Denis

[Quickfixj-users] test do not reply

[Marvin P. <m.p...@th...>]

=20

[Quickfixj-users] test do not reply

[Marvin P. <map...@gm...>]