Re: [Quickfixj-users] Session is not current and sequence numbers

SourceForge Headquarters 1320 Columbia Street Suite 310 San Diego, CA 92101 +1 (858) 422-6466

Thanks to Steve for a long and very helpful contribution. You might be =
on to
something in respect of sequence numbers. However, my problem is that =
"I" am
not doing anything at this level. All I have done is:
1) Modify the Executor example to write messages/logs to disc.
2) Added some code to the Application Class so that a sensible sample =
order
fill would be returned.
3) Played with the configuration file to (hopefully) get the session
settings right:
I am not setting/interfering with number sequencing or any stuff like =
that.
That all happens under the hood and before it gets to my code.
Config file is:
[DEFAULT]
BeginString=3DFIX.4.3
ConnectionType=3Dacceptor
ReconnectInterval=3D60
StartDay=3Dsunday
StartTime=3D19:00:00
EndDay=3Dsaturday
EndTime=3D18:00:00
MillisecondsInTimestamp=3DY
UseDataDictionary=3DY
DataDictionary=3DFIX43.xml
FileStorePath=3Doutput/data/executor
FileLogPath=3Doutput/data/executor
HeartBtInt=3D30
SocketAcceptPort=3D9876
SocketAcceptAddress=3D218.25.25.66
[SESSION]
SenderCompID=3DSFCTRADE_TEST
TargetCompID=3DAPC_TEST

Peter

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of
qui...@li...
Sent: 03 November 2006 12:55
To: qui...@li...
Subject: Quickfixj-users Digest, Vol 6, Issue 3

Send Quickfixj-users mailing list submissions to
	qui...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
or, via email, send a message with subject or body 'help' to
	qui...@li...

You can reach the person managing the list at
	qui...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Quickfixj-users digest..."

Today's Topics:

   1. Re: Session is not current (Peter Warder)
   2. Re: Session is not current (Steve Bate)

----------------------------------------------------------------------

Message: 1
Date: Fri, 3 Nov 2006 11:51:02 -0000
From: "Peter Warder" <pw...@bl...>
Subject: Re: [Quickfixj-users] Session is not current
To: <qui...@li...>
Message-ID: <000501c6ff3e$5730a9a0$0300a8c0@HAL>
Content-Type: text/plain;	charset=3D"us-ascii"

Hi Matyas,

Thank you for that thought. I have tried hard to synchronize the =
computer
clocks but maybe not successfully. I'll look at the initiator logs and
compare times. Does the event log entry 'No responder, not sending =
message'
Mean anything to anyone?

Thanks again to Steve and Matyas for your help.

Peter Warder=20

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of
qui...@li...
Sent: 02 November 2006 20:30
To: qui...@li...
Subject: Quickfixj-users Digest, Vol 6, Issue 2

Send Quickfixj-users mailing list submissions to
	qui...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
or, via email, send a message with subject or body 'help' to
	qui...@li...

You can reach the person managing the list at
	qui...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Quickfixj-users digest..."

Today's Topics:

   1. Re: Session is not current (Peter Warder)
   2. Re: Session is not current (Matyas Barakonyi)

----------------------------------------------------------------------

Message: 1
Date: Thu, 2 Nov 2006 11:23:03 -0000
From: "Peter Warder" <pw...@bl...>
Subject: Re: [Quickfixj-users] Session is not current
To: <qui...@li...>
Message-ID: <000001c6fe71$46471160$0300a8c0@HAL>
Content-Type: text/plain;	charset=3D"us-ascii"

Steve,

Thank you for your response. I understand that the log message does not
necessarily mean a problem. The problem is that the acceptor is replying =
to
the Logon message with a Logout (35=3D5) so we can never get a =
conversation
started.

The initiator is an established FIX engine (quickfix C version) already
successfully talking with other institutions. So using Banzai wont help.

Thanks,
Peter Warder
London

I've posted the event log below:

20061101-15:26:03: Session FIX.4.3:SFCTRADE_TEST->APC_TEST schedule is
weekly, SUN 19:00:00 UTC - SAT 18:00:00 UTC
20061101-15:26:03: Session state is not current; resetting
FIX.4.3:SFCTRADE_TEST->APC_TEST
20061101-15:26:03: No responder, not sending message
20061101-15:26:03: Valid order types: [1]
20061101-15:26:03: Created session: FIX.4.3:SFCTRADE_TEST->APC_TEST
20061101-15:26:42: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4847
20061101-15:26:42: Acceptor heartbeat set to 30 seconds
20061101-15:26:42: Disconnecting
20061101-15:27:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4848
20061101-15:27:43: Acceptor heartbeat set to 30 seconds
20061101-15:27:43: Disconnecting
20061101-15:28:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4849
20061101-15:28:43: Acceptor heartbeat set to 30 seconds
20061101-15:28:43: Disconnecting
20061101-15:29:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4850
20061101-15:29:43: Acceptor heartbeat set to 30 seconds
20061101-15:29:43: Disconnecting

And the message log:
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D17=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:26:43.135=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D207=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:26:42.750=0156=3DAPC_TE
ST=0110=3D051=01
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D19=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:27:43.438=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D216=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:27:43.000=0156=3DAPC_TE
ST=0110=3D041=01
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D21=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:28:43.691=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D211=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:28:43.250=0156=3DAPC_TE
ST=0110=3D049=01
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D23=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:29:43.933=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D213=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:29:43.484=0156=3DAPC_TE
ST=0110=3D059=01

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of
qui...@li...
Sent: 01 November 2006 22:31
To: qui...@li...
Subject: Quickfixj-users Digest, Vol 6, Issue 1

Send Quickfixj-users mailing list submissions to
	qui...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
or, via email, send a message with subject or body 'help' to
	qui...@li...

You can reach the person managing the list at
	qui...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Quickfixj-users digest..."

Today's Topics:

   1. Session is not current (Peter Warder)
   2. Re: Session is not current (st...@te...)

----------------------------------------------------------------------

Message: 1
Date: Wed, 1 Nov 2006 16:15:07 -0000
From: "Peter Warder" <pw...@bl...>
Subject: [Quickfixj-users] Session is not current
To: <qui...@li...>
Message-ID: <000001c6fdd0$e717a830$0300a8c0@HAL>
Content-Type: text/plain; charset=3D"us-ascii"

Hi,

I'm a Java rookie and a quickfixj rookie but in other respects a very
experienced developer.
I'm trying to get a quickfixj acceptor running (based on the executor
example) and have made decent progress.
I am receiving what look like perfectly good Logon messages from an
initiator but their authentication fails on my side so a Logout message =
is
returned to the initiator. The failure seems to be to do with a message =
that
the 'session is not current'. I don't know what this means nor how to =
fix
it.
Any ideas?? (logs attached)

Peter Warder
London
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.messages.log
Type: application/octet-stream
Size: 772 bytes
Desc: not available
Url :
http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/atta=
chmen
ts/20061101/14f2b7d0/attachment.obj=20
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.event.log
Type: application/octet-stream
Size: 1105 bytes
Desc: not available
Url :
http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/atta=
chmen
ts/20061101/14f2b7d0/attachment-0001.obj=20

------------------------------

Message: 2
Date: Wed, 1 Nov 2006 11:42:09 -0500 (EST)
From: st...@te...
Subject: Re: [Quickfixj-users] Session is not current
To: pe...@ss..., qui...@li...
Message-ID:
	<106...@we...>
Content-Type: text/plain;charset=3Diso-8859-1

That log message doesn't necessarily indicate a problem. It's telling =
you
that you have begun a new session (based on your session start/end
schedule) and it's going to reset the message store and sequence =
numbers.
This may or may not be a problem depending on the context.

It appears you are using the example order executor for your test. Have
you tried running Banzai as a client to the executor with the
configuration changed slightly for your scenario?

Steve

> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> Hi,
>
> I'm a Java rookie and a quickfixj rookie but in other respects a very
> experienced developer.
> I'm trying to get a quickfixj acceptor running (based on the executor
> example) and have made decent progress.
> I am receiving what look like perfectly good Logon messages from an
> initiator but their authentication fails on my side so a Logout =
message is
> returned to the initiator. The failure seems to be to do with a =
message
> that
> the 'session is not current'. I don't know what this means nor how to =
fix
> it.
> Any ideas?? (logs attached)
>
> Peter Warder
> London
> =
-------------------------------------------------------------------------=

> Using Tomcat but need to do more? Need to support web services, =
security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642____
___________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>

------------------------------

-------------------------------------------------------------------------=

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642

------------------------------

_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

End of Quickfixj-users Digest, Vol 6, Issue 1
*********************************************

------------------------------

Message: 2
Date: Thu, 02 Nov 2006 12:50:48 +0100
From: Matyas Barakonyi <ma...@ba...>
Subject: Re: [Quickfixj-users] Session is not current
To: pe...@ss..., qui...@li...
Message-ID: <454...@ba...>
Content-Type: text/plain; charset=3DISO-8859-1; format=3Dflowed

Hi!
I had a similar problem few mounths ago... The session could not be=20
established.
It was a time sinchronization problem between the 2 computers. It was=20
only a 0.5 min, but the accptor can't process the msg of the =
initiator...
I'm wondering if this couldn't be a problem in your case...
Regards,
Matyas

>QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
>QuickFIX/J Support: http://www.quickfixj.org/support/
>Steve,
>
>Thank you for your response. I understand that the log message does not
>necessarily mean a problem. The problem is that the acceptor is =
replying to
>the Logon message with a Logout (35=3D5) so we can never get a =
conversation
>started.
>
>The initiator is an established FIX engine (quickfix C version) already
>successfully talking with other institutions. So using Banzai wont =
help.
>
>Thanks,
>Peter Warder
>London
>
>I've posted the event log below:
>
>20061101-15:26:03: Session FIX.4.3:SFCTRADE_TEST->APC_TEST schedule is
>weekly, SUN 19:00:00 UTC - SAT 18:00:00 UTC
>20061101-15:26:03: Session state is not current; resetting
>FIX.4.3:SFCTRADE_TEST->APC_TEST
>20061101-15:26:03: No responder, not sending message
>20061101-15:26:03: Valid order types: [1]
>20061101-15:26:03: Created session: FIX.4.3:SFCTRADE_TEST->APC_TEST
>20061101-15:26:42: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4847
>20061101-15:26:42: Acceptor heartbeat set to 30 seconds
>20061101-15:26:42: Disconnecting
>20061101-15:27:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4848
>20061101-15:27:43: Acceptor heartbeat set to 30 seconds
>20061101-15:27:43: Disconnecting
>20061101-15:28:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4849
>20061101-15:28:43: Acceptor heartbeat set to 30 seconds
>20061101-15:28:43: Disconnecting
>20061101-15:29:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4850
>20061101-15:29:43: Acceptor heartbeat set to 30 seconds
>20061101-15:29:43: Disconnecting
>
>And the message log:
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D17=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:26:43.135=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D207=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:26:42.750=0156=3DAPC_T
E
>ST=0110=3D051=01
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D19=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:27:43.438=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D216=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:27:43.000=0156=3DAPC_T
E
>ST=0110=3D041=01
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D21=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:28:43.691=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D211=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:28:43.250=0156=3DAPC_T
E
>ST=0110=3D049=01
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D23=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:29:43.933=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D213=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:29:43.484=0156=3DAPC_T
E
>ST=0110=3D059=01
>
>
>-----Original Message-----
>From: qui...@li...
>[mailto:qui...@li...] On Behalf Of
>qui...@li...
>Sent: 01 November 2006 22:31
>To: qui...@li...
>Subject: Quickfixj-users Digest, Vol 6, Issue 1
>
>Send Quickfixj-users mailing list submissions to
>	qui...@li...
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>or, via email, send a message with subject or body 'help' to
>	qui...@li...
>
>You can reach the person managing the list at
>	qui...@li...
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Quickfixj-users digest..."
>
>
>Today's Topics:
>
>   1. Session is not current (Peter Warder)
>   2. Re: Session is not current (st...@te...)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Wed, 1 Nov 2006 16:15:07 -0000
>From: "Peter Warder" <pw...@bl...>
>Subject: [Quickfixj-users] Session is not current
>To: <qui...@li...>
>Message-ID: <000001c6fdd0$e717a830$0300a8c0@HAL>
>Content-Type: text/plain; charset=3D"us-ascii"
>
>Hi,
>
>I'm a Java rookie and a quickfixj rookie but in other respects a very
>experienced developer.
>I'm trying to get a quickfixj acceptor running (based on the executor
>example) and have made decent progress.
>I am receiving what look like perfectly good Logon messages from an
>initiator but their authentication fails on my side so a Logout message =
is
>returned to the initiator. The failure seems to be to do with a message
that
>the 'session is not current'. I don't know what this means nor how to =
fix
>it.
>Any ideas?? (logs attached)
>
>Peter Warder
>London
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.messages.log
>Type: application/octet-stream
>Size: 772 bytes
>Desc: not available
>Url :
>http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/att=
achme
n
>ts/20061101/14f2b7d0/attachment.obj=20
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.event.log
>Type: application/octet-stream
>Size: 1105 bytes
>Desc: not available
>Url :
>http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/att=
achme
n
>ts/20061101/14f2b7d0/attachment-0001.obj=20
>
>------------------------------
>
>Message: 2
>Date: Wed, 1 Nov 2006 11:42:09 -0500 (EST)
>From: st...@te...
>Subject: Re: [Quickfixj-users] Session is not current
>To: pe...@ss..., qui...@li...
>Message-ID:
>	<106...@we...>
>Content-Type: text/plain;charset=3Diso-8859-1
>
>That log message doesn't necessarily indicate a problem. It's telling =
you
>that you have begun a new session (based on your session start/end
>schedule) and it's going to reset the message store and sequence =
numbers.
>This may or may not be a problem depending on the context.
>
>It appears you are using the example order executor for your test. Have
>you tried running Banzai as a client to the executor with the
>configuration changed slightly for your scenario?
>
>Steve
>
> =20
>
>>QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
>>QuickFIX/J Support: http://www.quickfixj.org/support/
>>Hi,
>>
>>I'm a Java rookie and a quickfixj rookie but in other respects a very
>>experienced developer.
>>I'm trying to get a quickfixj acceptor running (based on the executor
>>example) and have made decent progress.
>>I am receiving what look like perfectly good Logon messages from an
>>initiator but their authentication fails on my side so a Logout =
message is
>>returned to the initiator. The failure seems to be to do with a =
message
>>that
>>the 'session is not current'. I don't know what this means nor how to =
fix
>>it.
>>Any ideas?? (logs attached)
>>
>>Peter Warder
>>London
>>-----------------------------------------------------------------------=
--
>>Using Tomcat but need to do more? Need to support web services, =
security?
>>Get stuff done quickly with pre-integrated technology to make your job
>>easier
>>Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>>
>>   =20
>>
>http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642___
_
>___________________________________________
> =20
>
>>Quickfixj-users mailing list
>>Qui...@li...
>>https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>>
>>   =20
>>
>
>
>
>
>
>------------------------------
>
>------------------------------------------------------------------------=
-
>Using Tomcat but need to do more? Need to support web services, =
security?
>Get stuff done quickly with pre-integrated technology to make your job
>easier
>Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
>
>------------------------------
>
>_______________________________________________
>Quickfixj-users mailing list
>Qui...@li...
>https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>
>
>End of Quickfixj-users Digest, Vol 6, Issue 1
>*********************************************
>
>
>
>
>
>------------------------------------------------------------------------=
-
>Using Tomcat but need to do more? Need to support web services, =
security?
>Get stuff done quickly with pre-integrated technology to make your job
easier
>Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
>_______________________________________________
>Quickfixj-users mailing list
>Qui...@li...
>https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> =20
>

------------------------------

-------------------------------------------------------------------------=

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642

------------------------------

_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

End of Quickfixj-users Digest, Vol 6, Issue 2
*********************************************

------------------------------

Message: 2
Date: Fri, 3 Nov 2006 07:54:07 -0500
From: "Steve Bate" <st...@te...>
Subject: Re: [Quickfixj-users] Session is not current
To: <qui...@li...>
Message-ID:
	<200...@ea...>
Content-Type: text/plain;	charset=3D"us-ascii"

Hi Peter,

The time offsets can cause a problem in some cases but your log =
indicates
that the offset is less than a few seconds and normally that would not
cause the login to be rejected unless MaxLatency was configured to a =
very
small value.

The message not sent log event means that a message send was attempted
before a connection was established. This is an informational message
since the message will eventually be sent once the session is =
established.
The timestamp on the log event doesn't match any of the messages in the
message log you provided. An outgoing message should have been logged=20
at the time the event was logged.

The reason I suggested using Banzai with your configuration is that
these problems are often caused by incorrect configurations. If Banzai
works with your configuration then it would be good to investigate the
application behavior further. If Banzai shows the same behavior, it's
probably the configuration file although it could be some environment
issue (like the time offset suggestion, for example).

The other common cause is a sequence number problem.

One strange thing I see is that you have reset your session which
implies the sequence numbers have been reset to 1. However, the =
initiator
is semding a sequence number of 17. A sequence number that is too
high will cause an immediate disconnect by the acceptor. However, I'd=20
expect to see a logged event. Are you sure your initiator is resetting
it's sequence numbers in a way consistent with the acceptor?

Regards,

Steve

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of =
Peter
Warder
Sent: Friday, November 03, 2006 6:51 AM
To: qui...@li...
Subject: Re: [Quickfixj-users] Session is not current

QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
QuickFIX/J Support: http://www.quickfixj.org/support/
Hi Matyas,

Thank you for that thought. I have tried hard to synchronize the =
computer
clocks but maybe not successfully. I'll look at the initiator logs and
compare times. Does the event log entry 'No responder, not sending =
message'
Mean anything to anyone?

Thanks again to Steve and Matyas for your help.

Peter Warder=20

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of
qui...@li...
Sent: 02 November 2006 20:30
To: qui...@li...
Subject: Quickfixj-users Digest, Vol 6, Issue 2

Send Quickfixj-users mailing list submissions to
	qui...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
or, via email, send a message with subject or body 'help' to
	qui...@li...

You can reach the person managing the list at
	qui...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Quickfixj-users digest..."

Today's Topics:

   1. Re: Session is not current (Peter Warder)
   2. Re: Session is not current (Matyas Barakonyi)

----------------------------------------------------------------------

Message: 1
Date: Thu, 2 Nov 2006 11:23:03 -0000
From: "Peter Warder" <pw...@bl...>
Subject: Re: [Quickfixj-users] Session is not current
To: <qui...@li...>
Message-ID: <000001c6fe71$46471160$0300a8c0@HAL>
Content-Type: text/plain;	charset=3D"us-ascii"

Steve,

Thank you for your response. I understand that the log message does not
necessarily mean a problem. The problem is that the acceptor is replying =
to
the Logon message with a Logout (35=3D5) so we can never get a =
conversation
started.

The initiator is an established FIX engine (quickfix C version) already
successfully talking with other institutions. So using Banzai wont help.

Thanks,
Peter Warder
London

I've posted the event log below:

20061101-15:26:03: Session FIX.4.3:SFCTRADE_TEST->APC_TEST schedule is
weekly, SUN 19:00:00 UTC - SAT 18:00:00 UTC
20061101-15:26:03: Session state is not current; resetting
FIX.4.3:SFCTRADE_TEST->APC_TEST
20061101-15:26:03: No responder, not sending message
20061101-15:26:03: Valid order types: [1]
20061101-15:26:03: Created session: FIX.4.3:SFCTRADE_TEST->APC_TEST
20061101-15:26:42: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4847
20061101-15:26:42: Acceptor heartbeat set to 30 seconds
20061101-15:26:42: Disconnecting
20061101-15:27:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4848
20061101-15:27:43: Acceptor heartbeat set to 30 seconds
20061101-15:27:43: Disconnecting
20061101-15:28:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4849
20061101-15:28:43: Acceptor heartbeat set to 30 seconds
20061101-15:28:43: Disconnecting
20061101-15:29:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
/62.138.239.155:4850
20061101-15:29:43: Acceptor heartbeat set to 30 seconds
20061101-15:29:43: Disconnecting

And the message log:
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D17=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:26:43.135=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D207=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:26:42.750=0156=3DAPC_TE
ST=0110=3D051=01
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D19=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:27:43.438=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D216=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:27:43.000=0156=3DAPC_TE
ST=0110=3D041=01
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D21=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:28:43.691=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D211=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:28:43.250=0156=3DAPC_TE
ST=0110=3D049=01
8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D23=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:29:43.933=0156=3DSFCT
RADE_TEST=0198=3D0=01108=3D30=0110=3D213=01
8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D200611=
01-15:29:43.484=0156=3DAPC_TE
ST=0110=3D059=01

-----Original Message-----
From: qui...@li...
[mailto:qui...@li...] On Behalf Of
qui...@li...
Sent: 01 November 2006 22:31
To: qui...@li...
Subject: Quickfixj-users Digest, Vol 6, Issue 1

Send Quickfixj-users mailing list submissions to
	qui...@li...

To subscribe or unsubscribe via the World Wide Web, visit
	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
or, via email, send a message with subject or body 'help' to
	qui...@li...

You can reach the person managing the list at
	qui...@li...

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Quickfixj-users digest..."

Today's Topics:

   1. Session is not current (Peter Warder)
   2. Re: Session is not current (st...@te...)

----------------------------------------------------------------------

Message: 1
Date: Wed, 1 Nov 2006 16:15:07 -0000
From: "Peter Warder" <pw...@bl...>
Subject: [Quickfixj-users] Session is not current
To: <qui...@li...>
Message-ID: <000001c6fdd0$e717a830$0300a8c0@HAL>
Content-Type: text/plain; charset=3D"us-ascii"

Hi,

I'm a Java rookie and a quickfixj rookie but in other respects a very
experienced developer.
I'm trying to get a quickfixj acceptor running (based on the executor
example) and have made decent progress.
I am receiving what look like perfectly good Logon messages from an
initiator but their authentication fails on my side so a Logout message =
is
returned to the initiator. The failure seems to be to do with a message =
that
the 'session is not current'. I don't know what this means nor how to =
fix
it.
Any ideas?? (logs attached)

Peter Warder
London
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.messages.log
Type: application/octet-stream
Size: 772 bytes
Desc: not available
Url :
http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/atta=
chmen
ts/20061101/14f2b7d0/attachment.obj=20
-------------- next part --------------
A non-text attachment was scrubbed...
Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.event.log
Type: application/octet-stream
Size: 1105 bytes
Desc: not available
Url :
http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/atta=
chmen
ts/20061101/14f2b7d0/attachment-0001.obj=20

------------------------------

Message: 2
Date: Wed, 1 Nov 2006 11:42:09 -0500 (EST)
From: st...@te...
Subject: Re: [Quickfixj-users] Session is not current
To: pe...@ss..., qui...@li...
Message-ID:
	<106...@we...>
Content-Type: text/plain;charset=3Diso-8859-1

That log message doesn't necessarily indicate a problem. It's telling =
you
that you have begun a new session (based on your session start/end
schedule) and it's going to reset the message store and sequence =
numbers.
This may or may not be a problem depending on the context.

It appears you are using the example order executor for your test. Have
you tried running Banzai as a client to the executor with the
configuration changed slightly for your scenario?

Steve

> QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
> QuickFIX/J Support: http://www.quickfixj.org/support/
> Hi,
>
> I'm a Java rookie and a quickfixj rookie but in other respects a very
> experienced developer.
> I'm trying to get a quickfixj acceptor running (based on the executor
> example) and have made decent progress.
> I am receiving what look like perfectly good Logon messages from an
> initiator but their authentication fails on my side so a Logout =
message is
> returned to the initiator. The failure seems to be to do with a =
message
> that
> the 'session is not current'. I don't know what this means nor how to =
fix
> it.
> Any ideas?? (logs attached)
>
> Peter Warder
> London
> =
-------------------------------------------------------------------------=

> Using Tomcat but need to do more? Need to support web services, =
security?
> Get stuff done quickly with pre-integrated technology to make your job
> easier
> Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642____
___________________________________________
> Quickfixj-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>

------------------------------

-------------------------------------------------------------------------=

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642

------------------------------

_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

End of Quickfixj-users Digest, Vol 6, Issue 1
*********************************************

------------------------------

Message: 2
Date: Thu, 02 Nov 2006 12:50:48 +0100
From: Matyas Barakonyi <ma...@ba...>
Subject: Re: [Quickfixj-users] Session is not current
To: pe...@ss..., qui...@li...
Message-ID: <454...@ba...>
Content-Type: text/plain; charset=3DISO-8859-1; format=3Dflowed

Hi!
I had a similar problem few mounths ago... The session could not be=20
established.
It was a time sinchronization problem between the 2 computers. It was=20
only a 0.5 min, but the accptor can't process the msg of the =
initiator...
I'm wondering if this couldn't be a problem in your case...
Regards,
Matyas

>QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
>QuickFIX/J Support: http://www.quickfixj.org/support/
>Steve,
>
>Thank you for your response. I understand that the log message does not
>necessarily mean a problem. The problem is that the acceptor is =
replying to
>the Logon message with a Logout (35=3D5) so we can never get a =
conversation
>started.
>
>The initiator is an established FIX engine (quickfix C version) already
>successfully talking with other institutions. So using Banzai wont =
help.
>
>Thanks,
>Peter Warder
>London
>
>I've posted the event log below:
>
>20061101-15:26:03: Session FIX.4.3:SFCTRADE_TEST->APC_TEST schedule is
>weekly, SUN 19:00:00 UTC - SAT 18:00:00 UTC
>20061101-15:26:03: Session state is not current; resetting
>FIX.4.3:SFCTRADE_TEST->APC_TEST
>20061101-15:26:03: No responder, not sending message
>20061101-15:26:03: Valid order types: [1]
>20061101-15:26:03: Created session: FIX.4.3:SFCTRADE_TEST->APC_TEST
>20061101-15:26:42: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4847
>20061101-15:26:42: Acceptor heartbeat set to 30 seconds
>20061101-15:26:42: Disconnecting
>20061101-15:27:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4848
>20061101-15:27:43: Acceptor heartbeat set to 30 seconds
>20061101-15:27:43: Disconnecting
>20061101-15:28:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4849
>20061101-15:28:43: Acceptor heartbeat set to 30 seconds
>20061101-15:28:43: Disconnecting
>20061101-15:29:43: Accepting session FIX.4.3:SFCTRADE_TEST->APC_TEST =
from
>/62.138.239.155:4850
>20061101-15:29:43: Acceptor heartbeat set to 30 seconds
>20061101-15:29:43: Disconnecting
>
>And the message log:
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D17=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:26:43.135=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D207=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:26:42.750=0156=3DAPC_T
E
>ST=0110=3D051=01
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D19=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:27:43.438=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D216=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:27:43.000=0156=3DAPC_T
E
>ST=0110=3D041=01
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D21=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:28:43.691=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D211=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:28:43.250=0156=3DAPC_T
E
>ST=0110=3D049=01
>8=3DFIX.4.3=019=3D83=0135=3DA=0134=3D23=0149=3DAPC_TEST=0150=3DFX=0152=3D=
20061101-15:29:43.933=0156=3DSFC
T
>RADE_TEST=0198=3D0=01108=3D30=0110=3D213=01
>8=3DFIX.4.3=019=3D64=0135=3D5=0134=3D1=0149=3DSFCTRADE_TEST=0152=3D20061=
101-15:29:43.484=0156=3DAPC_T
E
>ST=0110=3D059=01
>
>
>-----Original Message-----
>From: qui...@li...
>[mailto:qui...@li...] On Behalf Of
>qui...@li...
>Sent: 01 November 2006 22:31
>To: qui...@li...
>Subject: Quickfixj-users Digest, Vol 6, Issue 1
>
>Send Quickfixj-users mailing list submissions to
>	qui...@li...
>
>To subscribe or unsubscribe via the World Wide Web, visit
>	https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>or, via email, send a message with subject or body 'help' to
>	qui...@li...
>
>You can reach the person managing the list at
>	qui...@li...
>
>When replying, please edit your Subject line so it is more specific
>than "Re: Contents of Quickfixj-users digest..."
>
>
>Today's Topics:
>
>   1. Session is not current (Peter Warder)
>   2. Re: Session is not current (st...@te...)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Wed, 1 Nov 2006 16:15:07 -0000
>From: "Peter Warder" <pw...@bl...>
>Subject: [Quickfixj-users] Session is not current
>To: <qui...@li...>
>Message-ID: <000001c6fdd0$e717a830$0300a8c0@HAL>
>Content-Type: text/plain; charset=3D"us-ascii"
>
>Hi,
>
>I'm a Java rookie and a quickfixj rookie but in other respects a very
>experienced developer.
>I'm trying to get a quickfixj acceptor running (based on the executor
>example) and have made decent progress.
>I am receiving what look like perfectly good Logon messages from an
>initiator but their authentication fails on my side so a Logout message =
is
>returned to the initiator. The failure seems to be to do with a message
that
>the 'session is not current'. I don't know what this means nor how to =
fix
>it.
>Any ideas?? (logs attached)
>
>Peter Warder
>London
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.messages.log
>Type: application/octet-stream
>Size: 772 bytes
>Desc: not available
>Url :
>http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/att=
achme
n
>ts/20061101/14f2b7d0/attachment.obj=20
>-------------- next part --------------
>A non-text attachment was scrubbed...
>Name: FIX.4.3-SFCTRADE_TEST-APC_TEST.event.log
>Type: application/octet-stream
>Size: 1105 bytes
>Desc: not available
>Url :
>http://sourceforge.net/mailarchive/forum.php?forum=3Dquickfixj-users/att=
achme
n
>ts/20061101/14f2b7d0/attachment-0001.obj=20
>
>------------------------------
>
>Message: 2
>Date: Wed, 1 Nov 2006 11:42:09 -0500 (EST)
>From: st...@te...
>Subject: Re: [Quickfixj-users] Session is not current
>To: pe...@ss..., qui...@li...
>Message-ID:
>	<106...@we...>
>Content-Type: text/plain;charset=3Diso-8859-1
>
>That log message doesn't necessarily indicate a problem. It's telling =
you
>that you have begun a new session (based on your session start/end
>schedule) and it's going to reset the message store and sequence =
numbers.
>This may or may not be a problem depending on the context.
>
>It appears you are using the example order executor for your test. Have
>you tried running Banzai as a client to the executor with the
>configuration changed slightly for your scenario?
>
>Steve
>
> =20
>
>>QuickFIX/J Documentation: http://www.quickfixj.org/documentation/
>>QuickFIX/J Support: http://www.quickfixj.org/support/
>>Hi,
>>
>>I'm a Java rookie and a quickfixj rookie but in other respects a very
>>experienced developer.
>>I'm trying to get a quickfixj acceptor running (based on the executor
>>example) and have made decent progress.
>>I am receiving what look like perfectly good Logon messages from an
>>initiator but their authentication fails on my side so a Logout =
message is
>>returned to the initiator. The failure seems to be to do with a =
message
>>that
>>the 'session is not current'. I don't know what this means nor how to =
fix
>>it.
>>Any ideas?? (logs attached)
>>
>>Peter Warder
>>London
>>-----------------------------------------------------------------------=
--
>>Using Tomcat but need to do more? Need to support web services, =
security?
>>Get stuff done quickly with pre-integrated technology to make your job
>>easier
>>Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>>
>>   =20
>>
>http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642___
_
>___________________________________________
> =20
>
>>Quickfixj-users mailing list
>>Qui...@li...
>>https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>>
>>   =20
>>
>
>
>
>
>
>------------------------------
>
>------------------------------------------------------------------------=
-
>Using Tomcat but need to do more? Need to support web services, =
security?
>Get stuff done quickly with pre-integrated technology to make your job
>easier
>Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
>
>------------------------------
>
>_______________________________________________
>Quickfixj-users mailing list
>Qui...@li...
>https://lists.sourceforge.net/lists/listinfo/quickfixj-users
>
>
>End of Quickfixj-users Digest, Vol 6, Issue 1
>*********************************************
>
>
>
>
>
>------------------------------------------------------------------------=
-
>Using Tomcat but need to do more? Need to support web services, =
security?
>Get stuff done quickly with pre-integrated technology to make your job
easier
>Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
>http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
>_______________________________________________
>Quickfixj-users mailing list
>Qui...@li...
>https://lists.sourceforge.net/lists/listinfo/quickfixj-users
> =20
>

------------------------------

-------------------------------------------------------------------------=

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642

------------------------------

_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

End of Quickfixj-users Digest, Vol 6, Issue 2
*********************************************

-------------------------------------------------------------------------=

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642
_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

------------------------------

-------------------------------------------------------------------------=

Using Tomcat but need to do more? Need to support web services, =
security?
Get stuff done quickly with pre-integrated technology to make your job
easier
Download IBM WebSphere Application Server v.1.0.1 based on Apache =
Geronimo
http://sel.as-us.falkag.net/sel?cmd=3Dlnk&kid=3D120709&bid=3D263057&dat=3D=
121642

------------------------------

_______________________________________________
Quickfixj-users mailing list
Qui...@li...
https://lists.sourceforge.net/lists/listinfo/quickfixj-users

End of Quickfixj-users Digest, Vol 6, Issue 3
*********************************************