quickfix-users

[Quickfix-users] Visual C++ 2010 Express - Build Fails

[asif s. <asi...@gm...>]

Hi,

I am a newbie to QuickFix. I get the following errors when I try to load
quickfix_vs10.sln in Visual C++ 2010 Express:

=================================================================================================================================
E:\cpp_libs\quickfix\src\.NET\quickfix_net_messages_vs10.csproj cannot be
opened because its project type (.csproj) is not supported by this version
of the application.

E:\cpp_libs\quickfix\examples\executor\csharp\example_executor_csharp_vs10.csproj
cannot be opened because its project type (.csproj) is not supported by this
version of the application.

E:\cpp_libs\quickfix\examples\executor\vbnet\example_executor_vbnet_vs10.vbproj
cannot be opened because its project type (.vbproj) is not supported by this
version of the application.

E:\cpp_libs\quickfix\src\test_performance_net_vs10.csproj cannot be opened
because its project type (.csproj) is not supported by this version of the
application.

E:\cpp_libs\quickfix\src\test_unit_net_vs10.csproj cannot be opened because
its project type (.csproj) is not supported by this version of the
application.

E:\cpp_libs\quickfix\src\test_acceptance_net_vs10.csproj cannot be opened
because its project type (.csproj) is not supported by this version of the
application.

=================================================================================================================================

Since the above errors are all related to projects specific to
.Net/CSharp/VB.Net, I loaded the solution nonetheless but building the
solution results in the following errors:

=================================================================================================================================
1>------ Build started: Project: UnitTest++_vs10, Configuration: Debug Win32
------
2>------ Build started: Project: quickfix_vs10, Configuration: Debug Win32
------
2>  Acceptor.cpp
1>  XmlTestReporter.cpp
1>  TimeConstraint.cpp
1>  TestRunner.cpp
1>  TestResults.cpp
1>  TestReporterStdout.cpp
1>  TestReporter.cpp
1>  TestList.cpp
1>  TestDetails.cpp
1>  Test.cpp
1>  ReportAssert.cpp
1>  MemoryOutStream.cpp
1>  DeferredTestResult.cpp
1>  DeferredTestReporter.cpp
1>  CurrentTest.cpp
1>  Checks.cpp
1>  AssertException.cpp
1>  TimeHelpers.cpp
1>  Generating Code...
2>  CallStack.cpp
1>  UnitTest++_vs10.vcxproj ->
E:\cpp_libs\quickfix\lib\debug\UnitTest++_vs10.lib
3>------ Build started: Project: test_acceptance_runner_vs10, Configuration:
Debug Win32 ------
3>  getopt.c
3>  main.cpp
2>  DataDictionary.cpp
3>  Process.cpp
3>  ProcessTestCase.cpp
3>  Generating Code...
3>UnitTest++_vs10.lib(TestRunner.obj) : warning LNK4075: ignoring
'/EDITANDCONTINUE' due to '/INCREMENTAL:NO' specification
3>  test_acceptance_runner_vs10.vcxproj ->
E:\cpp_libs\quickfix\test\debug\at\atrun.exe
2>  DataDictionaryProvider.cpp
2>  Dictionary.cpp
2>  FieldMap.cpp
2>  FieldTypes.cpp
2>  FileLog.cpp
2>  FileStore.cpp
2>  Group.cpp
2>  HttpConnection.cpp
2>  HttpMessage.cpp
2>  HttpParser.cpp
2>  HttpServer.cpp
2>  Initiator.cpp
2>  LIBXML_DOMDocument.cpp
2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file:
'atlbase.h': No such file or directory
2>  Log.cpp
2>  Message.cpp
2>  MessageSorters.cpp
2>  MessageStore.cpp
2>  Generating Code...
2>  Compiling...
2>  MSXML_DOMDocument.cpp
2>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file:
'atlbase.h': No such file or directory
2>  MySQLLog.cpp
2>  MySQLStore.cpp
2>  NullStore.cpp
2>  OdbcLog.cpp
2>  OdbcStore.cpp
2>  Parser.cpp
2>  PostgreSQLLog.cpp
2>  PostgreSQLStore.cpp
2>  Session.cpp
2>  SessionFactory.cpp
2>  SessionSettings.cpp
2>  Settings.cpp
2>  SocketAcceptor.cpp
2>  SocketConnection.cpp
2>  SocketConnector.cpp
2>  SocketInitiator.cpp
2>  SocketMonitor.cpp
2>  SocketServer.cpp
2>  ThreadedSocketAcceptor.cpp
2>  Generating Code...
2>  Compiling...
2>  ThreadedSocketConnection.cpp
2>  ThreadedSocketInitiator.cpp
2>  TimeRange.cpp
2>  Utility.cpp
2>  Generating Code...
4>------ Build started: Project: test_unit_vs10, Configuration: Debug Win32
------
5>------ Build started: Project: test_performance_vs10, Configuration: Debug
Win32 ------
5>  getopt.c
4>  DataDictionaryTestCase.cpp
5>  pt.cpp
4>  DictionaryTestCase.cpp
5>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
4>  FieldBaseTestCase.cpp
6>------ Build started: Project: test_acceptance_vs10, Configuration: Debug
Win32 ------
6>  at.cpp
4>  FieldConvertorsTestCase.cpp
4>  FileLogTestCase.cpp
4>  FileStoreFactoryTestCase.cpp
6>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
7>------ Build started: Project: quickfix_net_vs10, Configuration: Debug
Win32 ------
7>cl : Command line warning D9035: option 'clr:oldsyntax' has been
deprecated and will be removed in a future release
7>  Stdafx.cpp
7>cl : Command line warning D9035: option 'clr:oldsyntax' has been
deprecated and will be removed in a future release
7>  AssemblyInfo.cpp
7>  CPPMessageStore.cpp
4>  FileStoreTestCase.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  FieldMap.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  Fields.cpp
4>  FileUtilitiesTestCase.cpp
7>  FileLog.cpp
4>  GroupTestCase.cpp
7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083: Cannot
open include file: 'quickfix/SessionID.h': No such file or directory
7>  FileMessageStore.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  Group.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  MemoryMessageStore.cpp
4>  HttpMessageTestCase.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  Message.cpp
4>  HttpParserTestCase.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  MessageStore.cpp
4>  MemoryStoreTestCase.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  MessageStoreFactory.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  MySQLLog.cpp
7>  MySQLStore.cpp
7>  OdbcLog.cpp
4>  MessageSortersTestCase.cpp
7>  OdbcStore.cpp
7>  PostgreSQLLog.cpp
7>  PostgreSQLStore.cpp
4>  MessagesTestCase.cpp
7>  quickfix_net.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  ScreenLog.cpp
7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083: Cannot
open include file: 'quickfix/SessionID.h': No such file or directory
7>  Session.cpp
7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot
open include file: 'quickfix/exceptions.h': No such file or directory
7>  Generating Code...
4>  MySQLStoreTestCase.cpp
4>  NullStoreTestCase.cpp
8>------ Build started: Project: example_tradeclient_vs10, Configuration:
Debug Win32 ------
8>  Application.cpp
8>e:\cpp_libs\quickfix\examples\tradeclient\application.h(25): fatal error
C1083: Cannot open include file: 'quickfix/Application.h': No such file or
directory
8>  tradeclient.cpp
8>e:\cpp_libs\quickfix\examples\tradeclient\tradeclient.cpp(26): fatal error
C1083: Cannot open include file: 'quickfix/FileStore.h': No such file or
directory
8>  Generating Code...
9>------ Build started: Project: example_ordermatch_vs10, Configuration:
Debug Win32 ------
9>  Application.cpp
9>e:\cpp_libs\quickfix\examples\ordermatch\application.h(31): fatal error
C1083: Cannot open include file: 'quickfix/Application.h': No such file or
directory
9>  Market.cpp
9>  ordermatch.cpp
9>e:\cpp_libs\quickfix\examples\ordermatch\ordermatch.cpp(26): fatal error
C1083: Cannot open include file: 'quickfix/FileStore.h': No such file or
directory
9>  Generating Code...
10>------ Build started: Project: example_executor_cpp_vs10, Configuration:
Debug Win32 ------
10>  Application.cpp
10>e:\cpp_libs\quickfix\examples\executor\c++\application.h(25): fatal error
C1083: Cannot open include file: 'quickfix/Application.h': No such file or
directory
10>  executor.cpp
10>e:\cpp_libs\quickfix\examples\executor\c++\executor.cpp(26): fatal error
C1083: Cannot open include file: 'quickfix/FileStore.h': No such file or
directory
10>  Generating Code...
4>  OdbcStoreTestCase.cpp
4>  ParserTestCase.cpp
4>  PostgreSQLStoreTestCase.cpp
4>  SessionIDTestCase.cpp
4>  Generating Code...
4>  Compiling...
4>  SessionSettingsTestCase.cpp
4>  SessionTestCase.cpp
4>  SettingsTestCase.cpp
4>  SocketAcceptorTestCase.cpp
4>  SocketConnectorTestCase.cpp
4>  SocketServerTestCase.cpp
4>  StringUtilitiesTestCase.cpp
4>  TestHelper.cpp
4>  TimeRangeTestCase.cpp
4>  ut.cpp
4>  UtcTimeOnlyTestCase.cpp
4>  UtcTimeStampTestCase.cpp
4>  Generating Code...
4>  getopt.c
4>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
========== Build: 2 succeeded, 8 failed, 0 up-to-date, 0 skipped ==========

=================================================================================================================================

Any help/hints as to what is going on?

Best regards / Asif

Re: [Quickfix-users] Visual C++ 2010 Express - Build Fails

[Djalma R. d. S. F. <drs...@gm...>]

> 2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file: 'atlbase.h': No such file or directory

The problem here is that ATL is not available in the VC express edition.

Go to config_windows.h and #define HAVE_LIBXML 1.

I just can't see a reason to #include altbase.h and atlconv.h in
LIBXML_DOMDocument.cpp, so I suggest that you try to remove them.


.On Mon, Mar 14, 2011 at 7:50 AM, asif saeed <asi...@gm...> wrote:
> QuickFIX Documentation: http://www.quickfixengine.org/quickfix/doc/html/index.html
> QuickFIX Support: http://www.quickfixengine.org/services.html
>
>
> Hi,
>
> I am a newbie to QuickFix. I get the following errors when I try to load quickfix_vs10.sln in Visual C++ 2010 Express:
>
> =================================================================================================================================
> E:\cpp_libs\quickfix\src\.NET\quickfix_net_messages_vs10.csproj cannot be opened because its project type (.csproj) is not supported by this version of the application.
>
> E:\cpp_libs\quickfix\examples\executor\csharp\example_executor_csharp_vs10.csproj cannot be opened because its project type (.csproj) is not supported by this version of the application.
>
> E:\cpp_libs\quickfix\examples\executor\vbnet\example_executor_vbnet_vs10.vbproj cannot be opened because its project type (.vbproj) is not supported by this version of the application.
>
> E:\cpp_libs\quickfix\src\test_performance_net_vs10.csproj cannot be opened because its project type (.csproj) is not supported by this version of the application.
>
> E:\cpp_libs\quickfix\src\test_unit_net_vs10.csproj cannot be opened because its project type (.csproj) is not supported by this version of the application.
>
> E:\cpp_libs\quickfix\src\test_acceptance_net_vs10.csproj cannot be opened because its project type (.csproj) is not supported by this version of the application.
>
> =================================================================================================================================
>
> Since the above errors are all related to projects specific to .Net/CSharp/VB.Net, I loaded the solution nonetheless but building the solution results in the following errors:
>
> =================================================================================================================================
> 1>------ Build started: Project: UnitTest++_vs10, Configuration: Debug Win32 ------
> 2>------ Build started: Project: quickfix_vs10, Configuration: Debug Win32 ------
> 2>  Acceptor.cpp
> 1>  XmlTestReporter.cpp
> 1>  TimeConstraint.cpp
> 1>  TestRunner.cpp
> 1>  TestResults.cpp
> 1>  TestReporterStdout.cpp
> 1>  TestReporter.cpp
> 1>  TestList.cpp
> 1>  TestDetails.cpp
> 1>  Test.cpp
> 1>  ReportAssert.cpp
> 1>  MemoryOutStream.cpp
> 1>  DeferredTestResult.cpp
> 1>  DeferredTestReporter.cpp
> 1>  CurrentTest.cpp
> 1>  Checks.cpp
> 1>  AssertException.cpp
> 1>  TimeHelpers.cpp
> 1>  Generating Code...
> 2>  CallStack.cpp
> 1>  UnitTest++_vs10.vcxproj -> E:\cpp_libs\quickfix\lib\debug\UnitTest++_vs10.lib
> 3>------ Build started: Project: test_acceptance_runner_vs10, Configuration: Debug Win32 ------
> 3>  getopt.c
> 3>  main.cpp
> 2>  DataDictionary.cpp
> 3>  Process.cpp
> 3>  ProcessTestCase.cpp
> 3>  Generating Code...
> 3>UnitTest++_vs10.lib(TestRunner.obj) : warning LNK4075: ignoring '/EDITANDCONTINUE' due to '/INCREMENTAL:NO' specification
> 3>  test_acceptance_runner_vs10.vcxproj -> E:\cpp_libs\quickfix\test\debug\at\atrun.exe
> 2>  DataDictionaryProvider.cpp
> 2>  Dictionary.cpp
> 2>  FieldMap.cpp
> 2>  FieldTypes.cpp
> 2>  FileLog.cpp
> 2>  FileStore.cpp
> 2>  Group.cpp
> 2>  HttpConnection.cpp
> 2>  HttpMessage.cpp
> 2>  HttpParser.cpp
> 2>  HttpServer.cpp
> 2>  Initiator.cpp
> 2>  LIBXML_DOMDocument.cpp
> 2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file: 'atlbase.h': No such file or directory
> 2>  Log.cpp
> 2>  Message.cpp
> 2>  MessageSorters.cpp
> 2>  MessageStore.cpp
> 2>  Generating Code...
> 2>  Compiling...
> 2>  MSXML_DOMDocument.cpp
> 2>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file: 'atlbase.h': No such file or directory
> 2>  MySQLLog.cpp
> 2>  MySQLStore.cpp
> 2>  NullStore.cpp
> 2>  OdbcLog.cpp
> 2>  OdbcStore.cpp
> 2>  Parser.cpp
> 2>  PostgreSQLLog.cpp
> 2>  PostgreSQLStore.cpp
> 2>  Session.cpp
> 2>  SessionFactory.cpp
> 2>  SessionSettings.cpp
> 2>  Settings.cpp
> 2>  SocketAcceptor.cpp
> 2>  SocketConnection.cpp
> 2>  SocketConnector.cpp
> 2>  SocketInitiator.cpp
> 2>  SocketMonitor.cpp
> 2>  SocketServer.cpp
> 2>  ThreadedSocketAcceptor.cpp
> 2>  Generating Code...
> 2>  Compiling...
> 2>  ThreadedSocketConnection.cpp
> 2>  ThreadedSocketInitiator.cpp
> 2>  TimeRange.cpp
> 2>  Utility.cpp
> 2>  Generating Code...
> 4>------ Build started: Project: test_unit_vs10, Configuration: Debug Win32 ------
> 5>------ Build started: Project: test_performance_vs10, Configuration: Debug Win32 ------
> 5>  getopt.c
> 4>  DataDictionaryTestCase.cpp
> 5>  pt.cpp
> 4>  DictionaryTestCase.cpp
> 5>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
> 4>  FieldBaseTestCase.cpp
> 6>------ Build started: Project: test_acceptance_vs10, Configuration: Debug Win32 ------
> 6>  at.cpp
> 4>  FieldConvertorsTestCase.cpp
> 4>  FileLogTestCase.cpp
> 4>  FileStoreFactoryTestCase.cpp
> 6>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
> 7>------ Build started: Project: quickfix_net_vs10, Configuration: Debug Win32 ------
> 7>cl : Command line warning D9035: option 'clr:oldsyntax' has been deprecated and will be removed in a future release
> 7>  Stdafx.cpp
> 7>cl : Command line warning D9035: option 'clr:oldsyntax' has been deprecated and will be removed in a future release
> 7>  AssemblyInfo.cpp
> 7>  CPPMessageStore.cpp
> 4>  FileStoreTestCase.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  FieldMap.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  Fields.cpp
> 4>  FileUtilitiesTestCase.cpp
> 7>  FileLog.cpp
> 4>  GroupTestCase.cpp
> 7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083: Cannot open include file: 'quickfix/SessionID.h': No such file or directory
> 7>  FileMessageStore.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  Group.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  MemoryMessageStore.cpp
> 4>  HttpMessageTestCase.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  Message.cpp
> 4>  HttpParserTestCase.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  MessageStore.cpp
> 4>  MemoryStoreTestCase.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  MessageStoreFactory.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  MySQLLog.cpp
> 7>  MySQLStore.cpp
> 7>  OdbcLog.cpp
> 4>  MessageSortersTestCase.cpp
> 7>  OdbcStore.cpp
> 7>  PostgreSQLLog.cpp
> 7>  PostgreSQLStore.cpp
> 4>  MessagesTestCase.cpp
> 7>  quickfix_net.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  ScreenLog.cpp
> 7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083: Cannot open include file: 'quickfix/SessionID.h': No such file or directory
> 7>  Session.cpp
> 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083: Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> 7>  Generating Code...
> 4>  MySQLStoreTestCase.cpp
> 4>  NullStoreTestCase.cpp
> 8>------ Build started: Project: example_tradeclient_vs10, Configuration: Debug Win32 ------
> 8>  Application.cpp
> 8>e:\cpp_libs\quickfix\examples\tradeclient\application.h(25): fatal error C1083: Cannot open include file: 'quickfix/Application.h': No such file or directory
> 8>  tradeclient.cpp
> 8>e:\cpp_libs\quickfix\examples\tradeclient\tradeclient.cpp(26): fatal error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file or directory
> 8>  Generating Code...
> 9>------ Build started: Project: example_ordermatch_vs10, Configuration: Debug Win32 ------
> 9>  Application.cpp
> 9>e:\cpp_libs\quickfix\examples\ordermatch\application.h(31): fatal error C1083: Cannot open include file: 'quickfix/Application.h': No such file or directory
> 9>  Market.cpp
> 9>  ordermatch.cpp
> 9>e:\cpp_libs\quickfix\examples\ordermatch\ordermatch.cpp(26): fatal error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file or directory
> 9>  Generating Code...
> 10>------ Build started: Project: example_executor_cpp_vs10, Configuration: Debug Win32 ------
> 10>  Application.cpp
> 10>e:\cpp_libs\quickfix\examples\executor\c++\application.h(25): fatal error C1083: Cannot open include file: 'quickfix/Application.h': No such file or directory
> 10>  executor.cpp
> 10>e:\cpp_libs\quickfix\examples\executor\c++\executor.cpp(26): fatal error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file or directory
> 10>  Generating Code...
> 4>  OdbcStoreTestCase.cpp
> 4>  ParserTestCase.cpp
> 4>  PostgreSQLStoreTestCase.cpp
> 4>  SessionIDTestCase.cpp
> 4>  Generating Code...
> 4>  Compiling...
> 4>  SessionSettingsTestCase.cpp
> 4>  SessionTestCase.cpp
> 4>  SettingsTestCase.cpp
> 4>  SocketAcceptorTestCase.cpp
> 4>  SocketConnectorTestCase.cpp
> 4>  SocketServerTestCase.cpp
> 4>  StringUtilitiesTestCase.cpp
> 4>  TestHelper.cpp
> 4>  TimeRangeTestCase.cpp
> 4>  ut.cpp
> 4>  UtcTimeOnlyTestCase.cpp
> 4>  UtcTimeStampTestCase.cpp
> 4>  Generating Code...
> 4>  getopt.c
> 4>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
> ========== Build: 2 succeeded, 8 failed, 0 up-to-date, 0 skipped ==========
>
> =================================================================================================================================
>
> Any help/hints as to what is going on?
>
> Best regards / Asif
>
>
> ------------------------------------------------------------------------------
> Colocation vs. Managed Hosting
> A question and answer guide to determining the best fit
> for your organization - today and in the future.
> http://p.sf.net/sfu/internap-sfd2d
> _______________________________________________
> Quickfix-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfix-users
>
>

Re: [Quickfix-users] Visual C++ 2010 Express - Build Fails

[asif s. <asi...@gm...>]

Hi Djalma,

I did as you suggested. However, I am getting different errors now:

===============================================================================================
1>e:\cpp_libs\quickfix\src\c++\LIBXML_DOMDocument.h(32): fatal error C1083:
Cannot open include file: 'libxml/xmlmemory.h': No such file or directory

1>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file:
'atlbase.h': No such file or directory
===============================================================================================


Goes without saying that I'd be thankful to the group if you guys help me
use VC Express 2010 with QuickFix. I am a newbie to QuickFix.

Regards / Asif



On Mon, Mar 14, 2011 at 8:16 PM, Djalma Rosa dos Santos Filho <
drs...@gm...> wrote:

> QuickFIX Documentation:
> http://www.quickfixengine.org/quickfix/doc/html/index.html
> QuickFIX Support: http://www.quickfixengine.org/services.html
>
> > 2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include
> file: 'atlbase.h': No such file or directory
>
> The problem here is that ATL is not available in the VC express edition.
>
> Go to config_windows.h and #define HAVE_LIBXML 1.
>
> I just can't see a reason to #include altbase.h and atlconv.h in
> LIBXML_DOMDocument.cpp, so I suggest that you try to remove them.
>
>
> .On Mon, Mar 14, 2011 at 7:50 AM, asif saeed <asi...@gm...> wrote:
> > QuickFIX Documentation:
> http://www.quickfixengine.org/quickfix/doc/html/index.html
> > QuickFIX Support: http://www.quickfixengine.org/services.html
> >
> >
> > Hi,
> >
> > I am a newbie to QuickFix. I get the following errors when I try to load
> quickfix_vs10.sln in Visual C++ 2010 Express:
> >
> >
> =================================================================================================================================
> > E:\cpp_libs\quickfix\src\.NET\quickfix_net_messages_vs10.csproj cannot be
> opened because its project type (.csproj) is not supported by this version
> of the application.
> >
> >
> E:\cpp_libs\quickfix\examples\executor\csharp\example_executor_csharp_vs10.csproj
> cannot be opened because its project type (.csproj) is not supported by this
> version of the application.
> >
> >
> E:\cpp_libs\quickfix\examples\executor\vbnet\example_executor_vbnet_vs10.vbproj
> cannot be opened because its project type (.vbproj) is not supported by this
> version of the application.
> >
> > E:\cpp_libs\quickfix\src\test_performance_net_vs10.csproj cannot be
> opened because its project type (.csproj) is not supported by this version
> of the application.
> >
> > E:\cpp_libs\quickfix\src\test_unit_net_vs10.csproj cannot be opened
> because its project type (.csproj) is not supported by this version of the
> application.
> >
> > E:\cpp_libs\quickfix\src\test_acceptance_net_vs10.csproj cannot be opened
> because its project type (.csproj) is not supported by this version of the
> application.
> >
> >
> =================================================================================================================================
> >
> > Since the above errors are all related to projects specific to
> .Net/CSharp/VB.Net, I loaded the solution nonetheless but building the
> solution results in the following errors:
> >
> >
> =================================================================================================================================
> > 1>------ Build started: Project: UnitTest++_vs10, Configuration: Debug
> Win32 ------
> > 2>------ Build started: Project: quickfix_vs10, Configuration: Debug
> Win32 ------
> > 2>  Acceptor.cpp
> > 1>  XmlTestReporter.cpp
> > 1>  TimeConstraint.cpp
> > 1>  TestRunner.cpp
> > 1>  TestResults.cpp
> > 1>  TestReporterStdout.cpp
> > 1>  TestReporter.cpp
> > 1>  TestList.cpp
> > 1>  TestDetails.cpp
> > 1>  Test.cpp
> > 1>  ReportAssert.cpp
> > 1>  MemoryOutStream.cpp
> > 1>  DeferredTestResult.cpp
> > 1>  DeferredTestReporter.cpp
> > 1>  CurrentTest.cpp
> > 1>  Checks.cpp
> > 1>  AssertException.cpp
> > 1>  TimeHelpers.cpp
> > 1>  Generating Code...
> > 2>  CallStack.cpp
> > 1>  UnitTest++_vs10.vcxproj ->
> E:\cpp_libs\quickfix\lib\debug\UnitTest++_vs10.lib
> > 3>------ Build started: Project: test_acceptance_runner_vs10,
> Configuration: Debug Win32 ------
> > 3>  getopt.c
> > 3>  main.cpp
> > 2>  DataDictionary.cpp
> > 3>  Process.cpp
> > 3>  ProcessTestCase.cpp
> > 3>  Generating Code...
> > 3>UnitTest++_vs10.lib(TestRunner.obj) : warning LNK4075: ignoring
> '/EDITANDCONTINUE' due to '/INCREMENTAL:NO' specification
> > 3>  test_acceptance_runner_vs10.vcxproj ->
> E:\cpp_libs\quickfix\test\debug\at\atrun.exe
> > 2>  DataDictionaryProvider.cpp
> > 2>  Dictionary.cpp
> > 2>  FieldMap.cpp
> > 2>  FieldTypes.cpp
> > 2>  FileLog.cpp
> > 2>  FileStore.cpp
> > 2>  Group.cpp
> > 2>  HttpConnection.cpp
> > 2>  HttpMessage.cpp
> > 2>  HttpParser.cpp
> > 2>  HttpServer.cpp
> > 2>  Initiator.cpp
> > 2>  LIBXML_DOMDocument.cpp
> > 2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include
> file: 'atlbase.h': No such file or directory
> > 2>  Log.cpp
> > 2>  Message.cpp
> > 2>  MessageSorters.cpp
> > 2>  MessageStore.cpp
> > 2>  Generating Code...
> > 2>  Compiling...
> > 2>  MSXML_DOMDocument.cpp
> > 2>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file:
> 'atlbase.h': No such file or directory
> > 2>  MySQLLog.cpp
> > 2>  MySQLStore.cpp
> > 2>  NullStore.cpp
> > 2>  OdbcLog.cpp
> > 2>  OdbcStore.cpp
> > 2>  Parser.cpp
> > 2>  PostgreSQLLog.cpp
> > 2>  PostgreSQLStore.cpp
> > 2>  Session.cpp
> > 2>  SessionFactory.cpp
> > 2>  SessionSettings.cpp
> > 2>  Settings.cpp
> > 2>  SocketAcceptor.cpp
> > 2>  SocketConnection.cpp
> > 2>  SocketConnector.cpp
> > 2>  SocketInitiator.cpp
> > 2>  SocketMonitor.cpp
> > 2>  SocketServer.cpp
> > 2>  ThreadedSocketAcceptor.cpp
> > 2>  Generating Code...
> > 2>  Compiling...
> > 2>  ThreadedSocketConnection.cpp
> > 2>  ThreadedSocketInitiator.cpp
> > 2>  TimeRange.cpp
> > 2>  Utility.cpp
> > 2>  Generating Code...
> > 4>------ Build started: Project: test_unit_vs10, Configuration: Debug
> Win32 ------
> > 5>------ Build started: Project: test_performance_vs10, Configuration:
> Debug Win32 ------
> > 5>  getopt.c
> > 4>  DataDictionaryTestCase.cpp
> > 5>  pt.cpp
> > 4>  DictionaryTestCase.cpp
> > 5>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
> > 4>  FieldBaseTestCase.cpp
> > 6>------ Build started: Project: test_acceptance_vs10, Configuration:
> Debug Win32 ------
> > 6>  at.cpp
> > 4>  FieldConvertorsTestCase.cpp
> > 4>  FileLogTestCase.cpp
> > 4>  FileStoreFactoryTestCase.cpp
> > 6>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
> > 7>------ Build started: Project: quickfix_net_vs10, Configuration: Debug
> Win32 ------
> > 7>cl : Command line warning D9035: option 'clr:oldsyntax' has been
> deprecated and will be removed in a future release
> > 7>  Stdafx.cpp
> > 7>cl : Command line warning D9035: option 'clr:oldsyntax' has been
> deprecated and will be removed in a future release
> > 7>  AssemblyInfo.cpp
> > 7>  CPPMessageStore.cpp
> > 4>  FileStoreTestCase.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  FieldMap.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  Fields.cpp
> > 4>  FileUtilitiesTestCase.cpp
> > 7>  FileLog.cpp
> > 4>  GroupTestCase.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083:
> Cannot open include file: 'quickfix/SessionID.h': No such file or directory
> > 7>  FileMessageStore.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  Group.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  MemoryMessageStore.cpp
> > 4>  HttpMessageTestCase.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  Message.cpp
> > 4>  HttpParserTestCase.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  MessageStore.cpp
> > 4>  MemoryStoreTestCase.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  MessageStoreFactory.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  MySQLLog.cpp
> > 7>  MySQLStore.cpp
> > 7>  OdbcLog.cpp
> > 4>  MessageSortersTestCase.cpp
> > 7>  OdbcStore.cpp
> > 7>  PostgreSQLLog.cpp
> > 7>  PostgreSQLStore.cpp
> > 4>  MessagesTestCase.cpp
> > 7>  quickfix_net.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  ScreenLog.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083:
> Cannot open include file: 'quickfix/SessionID.h': No such file or directory
> > 7>  Session.cpp
> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
> Cannot open include file: 'quickfix/exceptions.h': No such file or directory
> > 7>  Generating Code...
> > 4>  MySQLStoreTestCase.cpp
> > 4>  NullStoreTestCase.cpp
> > 8>------ Build started: Project: example_tradeclient_vs10, Configuration:
> Debug Win32 ------
> > 8>  Application.cpp
> > 8>e:\cpp_libs\quickfix\examples\tradeclient\application.h(25): fatal
> error C1083: Cannot open include file: 'quickfix/Application.h': No such
> file or directory
> > 8>  tradeclient.cpp
> > 8>e:\cpp_libs\quickfix\examples\tradeclient\tradeclient.cpp(26): fatal
> error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file
> or directory
> > 8>  Generating Code...
> > 9>------ Build started: Project: example_ordermatch_vs10, Configuration:
> Debug Win32 ------
> > 9>  Application.cpp
> > 9>e:\cpp_libs\quickfix\examples\ordermatch\application.h(31): fatal error
> C1083: Cannot open include file: 'quickfix/Application.h': No such file or
> directory
> > 9>  Market.cpp
> > 9>  ordermatch.cpp
> > 9>e:\cpp_libs\quickfix\examples\ordermatch\ordermatch.cpp(26): fatal
> error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file
> or directory
> > 9>  Generating Code...
> > 10>------ Build started: Project: example_executor_cpp_vs10,
> Configuration: Debug Win32 ------
> > 10>  Application.cpp
> > 10>e:\cpp_libs\quickfix\examples\executor\c++\application.h(25): fatal
> error C1083: Cannot open include file: 'quickfix/Application.h': No such
> file or directory
> > 10>  executor.cpp
> > 10>e:\cpp_libs\quickfix\examples\executor\c++\executor.cpp(26): fatal
> error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file
> or directory
> > 10>  Generating Code...
> > 4>  OdbcStoreTestCase.cpp
> > 4>  ParserTestCase.cpp
> > 4>  PostgreSQLStoreTestCase.cpp
> > 4>  SessionIDTestCase.cpp
> > 4>  Generating Code...
> > 4>  Compiling...
> > 4>  SessionSettingsTestCase.cpp
> > 4>  SessionTestCase.cpp
> > 4>  SettingsTestCase.cpp
> > 4>  SocketAcceptorTestCase.cpp
> > 4>  SocketConnectorTestCase.cpp
> > 4>  SocketServerTestCase.cpp
> > 4>  StringUtilitiesTestCase.cpp
> > 4>  TestHelper.cpp
> > 4>  TimeRangeTestCase.cpp
> > 4>  ut.cpp
> > 4>  UtcTimeOnlyTestCase.cpp
> > 4>  UtcTimeStampTestCase.cpp
> > 4>  Generating Code...
> > 4>  getopt.c
> > 4>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
> > ========== Build: 2 succeeded, 8 failed, 0 up-to-date, 0 skipped
> ==========
> >
> >
> =================================================================================================================================
> >
> > Any help/hints as to what is going on?
> >
> > Best regards / Asif
> >
> >
> >
> ------------------------------------------------------------------------------
> > Colocation vs. Managed Hosting
> > A question and answer guide to determining the best fit
> > for your organization - today and in the future.
> > http://p.sf.net/sfu/internap-sfd2d
> > _______________________________________________
> > Quickfix-users mailing list
> > Qui...@li...
> > https://lists.sourceforge.net/lists/listinfo/quickfix-users
> >
> >
>
>
> ------------------------------------------------------------------------------
> Colocation vs. Managed Hosting
> A question and answer guide to determining the best fit
> for your organization - today and in the future.
> http://p.sf.net/sfu/internap-sfd2d
> _______________________________________________
> Quickfix-users mailing list
> Qui...@li...
> https://lists.sourceforge.net/lists/listinfo/quickfix-users
>

Re: [Quickfix-users] Visual C++ 2010 Express - Build Fails

[Djalma R. d. S. F. <drs...@gm...>]

Hi,

> 1>e:\cpp_libs\quickfix\src\c++\LIBXML_DOMDocument.h(32): fatal error C1083:
> Cannot open include file: 'libxml/xmlmemory.h': No such file or directory

LibXML is an open source project, you must download the lib, install
it and change some VC++ directory settings in order to be able to
compile quickfix in MSVC without MSXML.

http://www.zlatkovic.com/libxml.en.html

> 1>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file:
> 'atlbase.h': No such file or directory
>

Here, the same problem because ATL is not available

Do the following modification to get rid of ATL headers when
HAVE_LIBXML is #defined.

#ifdef _MSC_VER
#include "stdafx.h"
//#include <atlbase.h>
//#include <atlconv.h>
#else
#include "config.h"
#endif
#include "CallStack.h"

#if (HAVE_LIBXML == 0 && _MSC_VER > 0)
#include <atlbase.h>
#include <atlconv.h>
#include "MSXML_DOMDocument.h"
#include <sstream>

On Tue, Mar 15, 2011 at 12:11 AM, asif saeed <asi...@gm...> wrote:
> Hi Djalma,
>
> I did as you suggested. However, I am getting different errors now:
>
> ===============================================================================================
> 1>e:\cpp_libs\quickfix\src\c++\LIBXML_DOMDocument.h(32): fatal error C1083:
> Cannot open include file: 'libxml/xmlmemory.h': No such file or directory
>
> 1>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include file:
> 'atlbase.h': No such file or directory
> ===============================================================================================
>
>
> Goes without saying that I'd be thankful to the group if you guys help me
> use VC Express 2010 with QuickFix. I am a newbie to QuickFix.
>
> Regards / Asif
>
>
>
> On Mon, Mar 14, 2011 at 8:16 PM, Djalma Rosa dos Santos Filho
> <drs...@gm...> wrote:
>>
>> QuickFIX Documentation:
>> http://www.quickfixengine.org/quickfix/doc/html/index.html
>> QuickFIX Support: http://www.quickfixengine.org/services.html
>>
>> > 2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include
>> > file: 'atlbase.h': No such file or directory
>>
>> The problem here is that ATL is not available in the VC express edition.
>>
>> Go to config_windows.h and #define HAVE_LIBXML 1.
>>
>> I just can't see a reason to #include altbase.h and atlconv.h in
>> LIBXML_DOMDocument.cpp, so I suggest that you try to remove them.
>>
>>
>> .On Mon, Mar 14, 2011 at 7:50 AM, asif saeed <asi...@gm...> wrote:
>> > QuickFIX Documentation:
>> > http://www.quickfixengine.org/quickfix/doc/html/index.html
>> > QuickFIX Support: http://www.quickfixengine.org/services.html
>> >
>> >
>> > Hi,
>> >
>> > I am a newbie to QuickFix. I get the following errors when I try to load
>> > quickfix_vs10.sln in Visual C++ 2010 Express:
>> >
>> >
>> > =================================================================================================================================
>> > E:\cpp_libs\quickfix\src\.NET\quickfix_net_messages_vs10.csproj cannot
>> > be opened because its project type (.csproj) is not supported by this
>> > version of the application.
>> >
>> >
>> > E:\cpp_libs\quickfix\examples\executor\csharp\example_executor_csharp_vs10.csproj
>> > cannot be opened because its project type (.csproj) is not supported by this
>> > version of the application.
>> >
>> >
>> > E:\cpp_libs\quickfix\examples\executor\vbnet\example_executor_vbnet_vs10.vbproj
>> > cannot be opened because its project type (.vbproj) is not supported by this
>> > version of the application.
>> >
>> > E:\cpp_libs\quickfix\src\test_performance_net_vs10.csproj cannot be
>> > opened because its project type (.csproj) is not supported by this version
>> > of the application.
>> >
>> > E:\cpp_libs\quickfix\src\test_unit_net_vs10.csproj cannot be opened
>> > because its project type (.csproj) is not supported by this version of the
>> > application.
>> >
>> > E:\cpp_libs\quickfix\src\test_acceptance_net_vs10.csproj cannot be
>> > opened because its project type (.csproj) is not supported by this version
>> > of the application.
>> >
>> >
>> > =================================================================================================================================
>> >
>> > Since the above errors are all related to projects specific to
>> > .Net/CSharp/VB.Net, I loaded the solution nonetheless but building the
>> > solution results in the following errors:
>> >
>> >
>> > =================================================================================================================================
>> > 1>------ Build started: Project: UnitTest++_vs10, Configuration: Debug
>> > Win32 ------
>> > 2>------ Build started: Project: quickfix_vs10, Configuration: Debug
>> > Win32 ------
>> > 2>  Acceptor.cpp
>> > 1>  XmlTestReporter.cpp
>> > 1>  TimeConstraint.cpp
>> > 1>  TestRunner.cpp
>> > 1>  TestResults.cpp
>> > 1>  TestReporterStdout.cpp
>> > 1>  TestReporter.cpp
>> > 1>  TestList.cpp
>> > 1>  TestDetails.cpp
>> > 1>  Test.cpp
>> > 1>  ReportAssert.cpp
>> > 1>  MemoryOutStream.cpp
>> > 1>  DeferredTestResult.cpp
>> > 1>  DeferredTestReporter.cpp
>> > 1>  CurrentTest.cpp
>> > 1>  Checks.cpp
>> > 1>  AssertException.cpp
>> > 1>  TimeHelpers.cpp
>> > 1>  Generating Code...
>> > 2>  CallStack.cpp
>> > 1>  UnitTest++_vs10.vcxproj ->
>> > E:\cpp_libs\quickfix\lib\debug\UnitTest++_vs10.lib
>> > 3>------ Build started: Project: test_acceptance_runner_vs10,
>> > Configuration: Debug Win32 ------
>> > 3>  getopt.c
>> > 3>  main.cpp
>> > 2>  DataDictionary.cpp
>> > 3>  Process.cpp
>> > 3>  ProcessTestCase.cpp
>> > 3>  Generating Code...
>> > 3>UnitTest++_vs10.lib(TestRunner.obj) : warning LNK4075: ignoring
>> > '/EDITANDCONTINUE' due to '/INCREMENTAL:NO' specification
>> > 3>  test_acceptance_runner_vs10.vcxproj ->
>> > E:\cpp_libs\quickfix\test\debug\at\atrun.exe
>> > 2>  DataDictionaryProvider.cpp
>> > 2>  Dictionary.cpp
>> > 2>  FieldMap.cpp
>> > 2>  FieldTypes.cpp
>> > 2>  FileLog.cpp
>> > 2>  FileStore.cpp
>> > 2>  Group.cpp
>> > 2>  HttpConnection.cpp
>> > 2>  HttpMessage.cpp
>> > 2>  HttpParser.cpp
>> > 2>  HttpServer.cpp
>> > 2>  Initiator.cpp
>> > 2>  LIBXML_DOMDocument.cpp
>> > 2>LIBXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include
>> > file: 'atlbase.h': No such file or directory
>> > 2>  Log.cpp
>> > 2>  Message.cpp
>> > 2>  MessageSorters.cpp
>> > 2>  MessageStore.cpp
>> > 2>  Generating Code...
>> > 2>  Compiling...
>> > 2>  MSXML_DOMDocument.cpp
>> > 2>MSXML_DOMDocument.cpp(22): fatal error C1083: Cannot open include
>> > file: 'atlbase.h': No such file or directory
>> > 2>  MySQLLog.cpp
>> > 2>  MySQLStore.cpp
>> > 2>  NullStore.cpp
>> > 2>  OdbcLog.cpp
>> > 2>  OdbcStore.cpp
>> > 2>  Parser.cpp
>> > 2>  PostgreSQLLog.cpp
>> > 2>  PostgreSQLStore.cpp
>> > 2>  Session.cpp
>> > 2>  SessionFactory.cpp
>> > 2>  SessionSettings.cpp
>> > 2>  Settings.cpp
>> > 2>  SocketAcceptor.cpp
>> > 2>  SocketConnection.cpp
>> > 2>  SocketConnector.cpp
>> > 2>  SocketInitiator.cpp
>> > 2>  SocketMonitor.cpp
>> > 2>  SocketServer.cpp
>> > 2>  ThreadedSocketAcceptor.cpp
>> > 2>  Generating Code...
>> > 2>  Compiling...
>> > 2>  ThreadedSocketConnection.cpp
>> > 2>  ThreadedSocketInitiator.cpp
>> > 2>  TimeRange.cpp
>> > 2>  Utility.cpp
>> > 2>  Generating Code...
>> > 4>------ Build started: Project: test_unit_vs10, Configuration: Debug
>> > Win32 ------
>> > 5>------ Build started: Project: test_performance_vs10, Configuration:
>> > Debug Win32 ------
>> > 5>  getopt.c
>> > 4>  DataDictionaryTestCase.cpp
>> > 5>  pt.cpp
>> > 4>  DictionaryTestCase.cpp
>> > 5>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
>> > 4>  FieldBaseTestCase.cpp
>> > 6>------ Build started: Project: test_acceptance_vs10, Configuration:
>> > Debug Win32 ------
>> > 6>  at.cpp
>> > 4>  FieldConvertorsTestCase.cpp
>> > 4>  FileLogTestCase.cpp
>> > 4>  FileStoreFactoryTestCase.cpp
>> > 6>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
>> > 7>------ Build started: Project: quickfix_net_vs10, Configuration: Debug
>> > Win32 ------
>> > 7>cl : Command line warning D9035: option 'clr:oldsyntax' has been
>> > deprecated and will be removed in a future release
>> > 7>  Stdafx.cpp
>> > 7>cl : Command line warning D9035: option 'clr:oldsyntax' has been
>> > deprecated and will be removed in a future release
>> > 7>  AssemblyInfo.cpp
>> > 7>  CPPMessageStore.cpp
>> > 4>  FileStoreTestCase.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  FieldMap.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  Fields.cpp
>> > 4>  FileUtilitiesTestCase.cpp
>> > 7>  FileLog.cpp
>> > 4>  GroupTestCase.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083:
>> > Cannot open include file: 'quickfix/SessionID.h': No such file or directory
>> > 7>  FileMessageStore.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  Group.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  MemoryMessageStore.cpp
>> > 4>  HttpMessageTestCase.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  Message.cpp
>> > 4>  HttpParserTestCase.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  MessageStore.cpp
>> > 4>  MemoryStoreTestCase.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  MessageStoreFactory.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  MySQLLog.cpp
>> > 7>  MySQLStore.cpp
>> > 7>  OdbcLog.cpp
>> > 4>  MessageSortersTestCase.cpp
>> > 7>  OdbcStore.cpp
>> > 7>  PostgreSQLLog.cpp
>> > 7>  PostgreSQLStore.cpp
>> > 4>  MessagesTestCase.cpp
>> > 7>  quickfix_net.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  ScreenLog.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\SessionID.h(28): fatal error C1083:
>> > Cannot open include file: 'quickfix/SessionID.h': No such file or directory
>> > 7>  Session.cpp
>> > 7>e:\cpp_libs\quickfix\src\.net\Exceptions.h(29): fatal error C1083:
>> > Cannot open include file: 'quickfix/exceptions.h': No such file or directory
>> > 7>  Generating Code...
>> > 4>  MySQLStoreTestCase.cpp
>> > 4>  NullStoreTestCase.cpp
>> > 8>------ Build started: Project: example_tradeclient_vs10,
>> > Configuration: Debug Win32 ------
>> > 8>  Application.cpp
>> > 8>e:\cpp_libs\quickfix\examples\tradeclient\application.h(25): fatal
>> > error C1083: Cannot open include file: 'quickfix/Application.h': No such
>> > file or directory
>> > 8>  tradeclient.cpp
>> > 8>e:\cpp_libs\quickfix\examples\tradeclient\tradeclient.cpp(26): fatal
>> > error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file
>> > or directory
>> > 8>  Generating Code...
>> > 9>------ Build started: Project: example_ordermatch_vs10, Configuration:
>> > Debug Win32 ------
>> > 9>  Application.cpp
>> > 9>e:\cpp_libs\quickfix\examples\ordermatch\application.h(31): fatal
>> > error C1083: Cannot open include file: 'quickfix/Application.h': No such
>> > file or directory
>> > 9>  Market.cpp
>> > 9>  ordermatch.cpp
>> > 9>e:\cpp_libs\quickfix\examples\ordermatch\ordermatch.cpp(26): fatal
>> > error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file
>> > or directory
>> > 9>  Generating Code...
>> > 10>------ Build started: Project: example_executor_cpp_vs10,
>> > Configuration: Debug Win32 ------
>> > 10>  Application.cpp
>> > 10>e:\cpp_libs\quickfix\examples\executor\c++\application.h(25): fatal
>> > error C1083: Cannot open include file: 'quickfix/Application.h': No such
>> > file or directory
>> > 10>  executor.cpp
>> > 10>e:\cpp_libs\quickfix\examples\executor\c++\executor.cpp(26): fatal
>> > error C1083: Cannot open include file: 'quickfix/FileStore.h': No such file
>> > or directory
>> > 10>  Generating Code...
>> > 4>  OdbcStoreTestCase.cpp
>> > 4>  ParserTestCase.cpp
>> > 4>  PostgreSQLStoreTestCase.cpp
>> > 4>  SessionIDTestCase.cpp
>> > 4>  Generating Code...
>> > 4>  Compiling...
>> > 4>  SessionSettingsTestCase.cpp
>> > 4>  SessionTestCase.cpp
>> > 4>  SettingsTestCase.cpp
>> > 4>  SocketAcceptorTestCase.cpp
>> > 4>  SocketConnectorTestCase.cpp
>> > 4>  SocketServerTestCase.cpp
>> > 4>  StringUtilitiesTestCase.cpp
>> > 4>  TestHelper.cpp
>> > 4>  TimeRangeTestCase.cpp
>> > 4>  ut.cpp
>> > 4>  UtcTimeOnlyTestCase.cpp
>> > 4>  UtcTimeStampTestCase.cpp
>> > 4>  Generating Code...
>> > 4>  getopt.c
>> > 4>LINK : fatal error LNK1181: cannot open input file 'quickfix.lib'
>> > ========== Build: 2 succeeded, 8 failed, 0 up-to-date, 0 skipped
>> > ==========
>> >
>> >
>> > =================================================================================================================================
>> >
>> > Any help/hints as to what is going on?
>> >
>> > Best regards / Asif
>> >
>> >
>> >
>> > ------------------------------------------------------------------------------
>> > Colocation vs. Managed Hosting
>> > A question and answer guide to determining the best fit
>> > for your organization - today and in the future.
>> > http://p.sf.net/sfu/internap-sfd2d
>> > _______________________________________________
>> > Quickfix-users mailing list
>> > Qui...@li...
>> > https://lists.sourceforge.net/lists/listinfo/quickfix-users
>> >
>> >
>>
>>
>> ------------------------------------------------------------------------------
>> Colocation vs. Managed Hosting
>> A question and answer guide to determining the best fit
>> for your organization - today and in the future.
>> http://p.sf.net/sfu/internap-sfd2d
>> _______________________________________________
>> Quickfix-users mailing list
>> Qui...@li...
>> https://lists.sourceforge.net/lists/listinfo/quickfix-users
>
>