The newest Qtest has lot of ASDU types but Parameters in Control Directions (110..113) are missing. Does anyone know a free program can be generated these?
PL
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi Pasi,
I have updated QTester104, version 2.1, with support for 110-113 ASDUs in control direction.
Also now the software can register in the point map panel the return of commands from RTU.
I am not aware of another free software that can generate those ASDUs. Maybe some trial version.
I hope this update can be useful to you.
Best regards,
Ricardo
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This is very fine. I have not used these command earlier. Do you know, is the system, that firstly set all parameters with 110-113 commands and then put these on by 114 command?
I have never seen a system or RTU that make use of these ASDUs for parameter setting/activation. I guess that the working of those commands will vary from system to system. I mean some system may activate the parameter immediately, others may activete it by the P_AC_NA_1 ASDU.
If you eventually learn something from this, please share it here so we may learn also as the usage in practice of those commands is kind of obscure.
Last edit: ricardolo 2019-12-05
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
The newest Qtest has lot of ASDU types but Parameters in Control Directions (110..113) are missing. Does anyone know a free program can be generated these?
PL
Hi Pasi,
I have updated QTester104, version 2.1, with support for 110-113 ASDUs in control direction.
Also now the software can register in the point map panel the return of commands from RTU.
I am not aware of another free software that can generate those ASDUs. Maybe some trial version.
I hope this update can be useful to you.
Best regards,
Ricardo
Hi Ricardo
This is very fine. I have not used these command earlier. Do you know, is the system, that firstly set all parameters with 110-113 commands and then put these on by 114 command?
Thank Pasi
Sent from my Huawei Mobile
-------- Original Message --------
Subject: [qtester104:discussion] Re: P_ME_NA_1 etc
From: ricardolo ricardolo@users.sourceforge.net
To: "[qtester104:discussion] " general@discussion.qtester104.p.re.sourceforge.net
CC:
I have never seen a system or RTU that make use of these ASDUs for parameter setting/activation. I guess that the working of those commands will vary from system to system. I mean some system may activate the parameter immediately, others may activete it by the P_AC_NA_1 ASDU.
If you eventually learn something from this, please share it here so we may learn also as the usage in practice of those commands is kind of obscure.
Last edit: ricardolo 2019-12-05