Read and respond to this message at:
https://sourceforge.net/forum/message.php?msg_id=5104731
By: alpha179
1) I am using the Delorme Earthmate LT-40 GPS (USB) on an Archos PMA-430.
2) The Operating System Software has been changed to OpenPMA 0.2
3) The GPS device is connected to the PMA430 by the USB host cable.
When starting qpeGPS 0.9.2.3 pre I get the following error:
Abort: Exit qpeGPS now.
Retry: Start gpsd with default settings.
Ignore: Change setup on GPS page.
Problem:
1) Using the guide from Pointlisse.com Using QpeGPS with your PMA430"
ARGS: -p /dev/gps
Host: localhost
Port: 2947
Result
GPSD: ERR (red), the GPS: ??? (red)*No GMS Signal rcvd*
Using the Default Setting
ARGS: -p /dev/ttyS0 -s 4800
Host: localhost
Port: 2947
Result
GPSD: OK (green), GPS: ??? (red)*No GMS Signal rcvd*
Using a Modified Setting
ARGS: -p /dev/ttyS0 s 9600
Host: localhost
Port: 2947
Result
GPSD: OK (green), GPS: ??? (red)*No GMS Signal rcvd*
Is there anything that you can see that is wrong? Any help would be
appreciated.
Thanks,
______________________________________________________________________
You are receiving this email because you elected to monitor this forum.
To stop monitoring this forum, login to SourceForge.net and visit:
https://sourceforge.net/forum/unmonitor.php?forum_id=206323
|
