Menu ▾ ▴

QLC Crashing after loading project via web interface

[Read-Only] Raspberry Pi
Jimmy T.
2014-10-31
2014-11-03

  • Jimmy T.

    Jimmy T. - 2014-10-31

    Hi All.

    Had test system working and adding more controls, scenes and all. Now when I load the project it crashes QLC and drops back to the prompt.

    HDMI output shows QLC restarting after the project is loaded then it drops out.

    Is there a log that I can look at for QLC that will show if there file has an issues or something QLC does not like?

    It's hard to see on the video I captured but looks like:

    ftdi_sio 1-1.2:1.0; device disconnected

    The web interface in non-resonsive, SSH into the Rpi I can get around but if I try to perform RESTART is sits for a moment and comes back to prompt and does not reboot and restart.

    Thanks for any help.

     

  • Jimmy T.

    Jimmy T. - 2014-10-31

    I attached my project file

     
    13 Light Rig fc.qxw

  • Massimo Callegari

    Massimo Callegari - 2014-11-01

    Hello Jimmy, you just spotted a generic crash, not specifically related to the RPi.
    I tested your project via web on the desktop version and it crashes as well.
    Gonna fix it right away.

    Thanks

     

  • Massimo Callegari

    Massimo Callegari - 2014-11-01

    OK, I've fixed it.
    It was something related to nested multipage/non-multipage frames.

    Will be included in version 4.8.2

     

    Last edit: Massimo Callegari 2014-11-01

  • Jimmy T.

    Jimmy T. - 2014-11-03

    Thanks Massimo,

    I also seen if I load the a single page project about 3 or 4 times in the web it will crash it as well. Could that be part of the same issue?

    I attached the file I was using.

     
    test.qxw