I have created a definition for Chauvet's Intimidator LED 150 and all functions work great. The problem comes when using an XY Pad or trying to set a scene. Whatever setting the Pan/Tilt is on in the Simple Desk overrides the settings in the VC or Scene.
For example: If the light is facing straight down and I use my XY Pad widget to turn the light, it immediately returns to the original position of straight down.
If I create a scene and input Pan/Tilt values - when I activate that scene the light does not even move. (DMX Monitor also shows no change on any channel other than the Dimmer)
Mac OSX Mavericks
Enttec Open DMX USB
QLC+ 4.5.1
Once again - all functions work beautifully in the Simple Desk.
Last edit: Michael Hall 2013-11-22
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Summary: SimpleDesk for LTP channels is BROKEN in 4.5.0. The fix is waiting for the next release (you can try to compile yourself if you are brave and impatient enough).
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello everyone,
I have created a definition for Chauvet's Intimidator LED 150 and all functions work great. The problem comes when using an XY Pad or trying to set a scene. Whatever setting the Pan/Tilt is on in the Simple Desk overrides the settings in the VC or Scene.
For example: If the light is facing straight down and I use my XY Pad widget to turn the light, it immediately returns to the original position of straight down.
If I create a scene and input Pan/Tilt values - when I activate that scene the light does not even move. (DMX Monitor also shows no change on any channel other than the Dimmer)
Mac OSX Mavericks
Enttec Open DMX USB
QLC+ 4.5.1
Once again - all functions work beautifully in the Simple Desk.
Last edit: Michael Hall 2013-11-22
https://sourceforge.net/p/qlcplus/discussion/general/thread/38b7da7a/#03c5
https://sourceforge.net/p/qlcplus/discussion/general/thread/ee829da9/#10ca
Summary: SimpleDesk for LTP channels is BROKEN in 4.5.0. The fix is waiting for the next release (you can try to compile yourself if you are brave and impatient enough).