HI,
I noticed that, when I add more then 1 fixture and I use an XY-pad to control them. The last channel on a fixtures begins to change, when I change the Y axes on the pad. So I have firstly redone the fixture but to no a vale.Then I start to experiment with different fixtures and I noticed that the last channel change only when the fixture added has less then 10 channel and I didn't use gap channel between them. Observations on 4.6.0 and 4.6.1 (git), x64, linux and win 7.
Thanks.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
HI,
I noticed that, when I add more then 1 fixture and I use an XY-pad to control them. The last channel on a fixtures begins to change, when I change the Y axes on the pad. So I have firstly redone the fixture but to no a vale.Then I start to experiment with different fixtures and I noticed that the last channel change only when the fixture added has less then 10 channel and I didn't use gap channel between them. Observations on 4.6.0 and 4.6.1 (git), x64, linux and win 7.
Thanks.
Good catch!
THe problem is here: https://github.com/mcallegari/qlcplus/blob/master/ui/src/vcxypadfixture.cpp#L376
I'll fix it.
Thanks.
I forgot to tell, that the fixtures that causes the problem has only the msb pan/tilt channels (8bit)
Fixed, pushed to git.
Thanks for finding it.
Thanks a lot. Compiled tested and WORKING!
Thanks again.
Wow! not just me. I thought it was just a fault in the DMX line.
For those of you who are on 4.6.0 and are waiting for the new release, the quick fix is to put a gap of 1 between fixtures.
Have a nice day :P
Last edit: Cingulingu 2014-01-06