I had a very successful Halloween Light and Sound show all thanks to QLC+ ! I am planning on using QLC+ again for my Christmas show as well. I thought some might enjoy a video of the show. Kids and adults loved it! It was programmed via MIDI and MIDI was passed into QLC+ via virtual midi cable (LoopBe1). DMX out was via E1.31 Bridge, and controllers are home built DMX 16 channel dimmers. The show had a total of 64 channels. In addition, I used 12 RGB Par Cans (86 LED's each) They were sound triggered controlled.
Last weekend I did a light show with QLC+.
In the video only part of the lights are shown.
QLC+ runs on a MacBook Pro with the Enttec Open DMX USB and the APC20 midi controller.
These are the lights:
- 8x LED wash
- 2x mac 250
- 8x pixel bar 12
- 2x LED cone
- 4x Trus LED (adj mega par profile)
- 1x Atomic strobe
- 1x Smoke machine moving head
- 1x JEM ZR-44 smoke machine
- 1x conventional par bar for dj light
We used our own Lighting rig along with the Lighting rig already there. we used QLC+ to send DMX data to an ETC board to control the auditorium house lights and stage pars and everything else was ours.
Gear List:
Lights:
32 Feet of Truss
8 High End Studio Beam PC 250s
5 Elation Arena Pars
4 Chauvet Vue 1.1 (you can barely even see these LOL)
2 ADJ Mega Flash Strobes
1 Chauvet Scorpion GBC 1.0 (Laser)
12 ADJ Par 36 Pro LED (Truss Warmers)
Atmospherics:
2 Chauvet 1800 Flex (one on truss one behind FOH)
Hi everyone, I would like to dedicate this space to share some videos of the results that users achieved with QLC+.
Here the ones collected so far:
BLAQ Visual Department - 31.10.2013 - Teatro della Lana - Stia
https://www.youtube.com/watch?v=n6QiI2DRK94
Blaq Visual Department @ MILK! Retrofuture Epiphany 05/01/2014
http://youtu.be/nAs8a-Esxd0?list=UUiDJtGRYzk-r1ceXN94ibSg
BLAQ presents: HEXAGON 15022014 Party-Report
https://www.youtube.com/watch?v=XL5crQok2i4&list=UUiDJtGRYzk-r1ceXN94ibSg
Demo of an Android/IOS controlled DMX Lighting Foot Controller using QLC+ and Raspberry Pi
https://www.youtube.com/watch?v=N3Nx0_epcuc
QLC+ & Multitrack Studio for holiday light show. DEMO
https://www.youtube.com/watch?v=jHad5i9vVo0
Prototype of Singing Face & midi to dmx test
https://www.youtube.com/watch?v=wSXBbzZzuGc
Grumpka's Light & Sound Show Halloween 2014
https://www.youtube.com/watch?v=jRdJ1GjqRtE
https://www.youtube.com/watch?v=KJD6NTMi9F8
QLC+ & Raspberry Pi DMX Controller
http://youtu.be/l14ejw-7w4o
Disco Light show
http://youtu.be/yrV9G63Wrc4
http://youtu.be/w24Wq7QaIFw
Disco lights with Mixxx and QLC+
http://youtu.be/eLowyMfkJ_4
RGB Panel demo
http://www.housewarrior.nl/wp-content/uploads/2014/12/RGB-Ledpanel-1280-720.mp4?_=1
QLC+ and AKAI APC mini
http://www.youtube.com/watch?v=fWQmovaV7aw
Please do not start technical discussions here. In case, create a new thread in the forum and refer to this post.
Anyone wanting to share their results is very welcome.
Thanks to: Alessandro, Scott, Stephen, Jimmy, Joep, Markus, Rob, Adrian
Last edit: Massimo Callegari 2015-02-15
Hello everyone,
I had a very successful Halloween Light and Sound show all thanks to QLC+ ! I am planning on using QLC+ again for my Christmas show as well. I thought some might enjoy a video of the show. Kids and adults loved it! It was programmed via MIDI and MIDI was passed into QLC+ via virtual midi cable (LoopBe1). DMX out was via E1.31 Bridge, and controllers are home built DMX 16 channel dimmers. The show had a total of 64 channels. In addition, I used 12 RGB Par Cans (86 LED's each) They were sound triggered controlled.
You can ask questions or follow my progress with QLC+ and my holiday light shows by visiting my Facebook page at;
https://www.facebook.com/grumpkaholidaylights
HALLOWEEN LIGHT AND SOUnd SHOW using QLC+ & Midi
http://youtu.be/jRdJ1GjqRtE
Thanks to Massimo once again for all his kindness and support of QLC+ and its users.
Best Wishes,
Stephen (Grumpka)
Last edit: Grumpka 2014-11-12
Awesome job Stephen ! Thank you very much for sharing !
Added Jimmy Traylor's video !
Love the Crazy Train opening !! :)
Last weekend I did a light show with QLC+.
In the video only part of the lights are shown.
QLC+ runs on a MacBook Pro with the Enttec Open DMX USB and the APC20 midi controller.
These are the lights:
- 8x LED wash
- 2x mac 250
- 8x pixel bar 12
- 2x LED cone
- 4x Trus LED (adj mega par profile)
- 1x Atomic strobe
- 1x Smoke machine moving head
- 1x JEM ZR-44 smoke machine
- 1x conventional par bar for dj light
http://youtu.be/yrV9G63Wrc4
http://youtu.be/w24Wq7QaIFw
Last edit: Joep Admiraal 2014-12-11
Thanks Joep ! Love the truss ring ! :)
Battle Of the Bands Event at a Local High School.
We used our own Lighting rig along with the Lighting rig already there. we used QLC+ to send DMX data to an ETC board to control the auditorium house lights and stage pars and everything else was ours.
Gear List:
Lights:
32 Feet of Truss
8 High End Studio Beam PC 250s
5 Elation Arena Pars
4 Chauvet Vue 1.1 (you can barely even see these LOL)
2 ADJ Mega Flash Strobes
1 Chauvet Scorpion GBC 1.0 (Laser)
12 ADJ Par 36 Pro LED (Truss Warmers)
Atmospherics:
2 Chauvet 1800 Flex (one on truss one behind FOH)
Sound:
4 EV TX2152 (Tops)
8 EV QRx-218S (Subs)
Nice!
I'd love to see some video of this (or future) show.
Here my small video contribution. This is a party for my daughter in a cabin in the woods. The equipment is:
A laptop with Mixxx for the music. Mixxx transmits beat and volume information via midi to QLCplus (See https://sourceforge.net/p/qlcplus/discussion/general/thread/be3a87e4/)
Video1: Installed lights https://www.youtube.com/watch?v=eLowyMfkJ_4