No feedback on Korg nanoKontrol 2

Brought to you by: mcallegari79

This project can now be found here.

No feedback on Korg nanoKontrol 2

Forum: [Read-Only] Issues, feedbacks and ideas

Creator: Smasty

Created: 2014-12-26

Updated: 2014-12-27

Smasty - 2014-12-26

Hello, I'm new to using QLC+ as a DMX controller. I have QLC+ 4.8.3. installed on my Debian Jessie laptop, with a Korg NanoKontrol 2 as my input/feedback device. The problem is, the feedback doesn't work - the buttons on the Korg do not stay backlit when a coresponding button in virtual console is selected. The buttons only flash with red backlight, and then stay dark. It's annoying, since there is no visual feedback for running functions.

Do you have any ideas how I could fix this issue?

Thanks.

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Santiago Benejam Torres - 2014-12-27

The NanoKontrol2 has an option called LED Mode that can be set to Internal or External. Set it to External with the software provided by Korg. I don't know if works with Wine, I changed it from Windows XP running in Virtualbox on Ubuntu.
And do not forget to mark midi input and feedback checkboxes in the Inputs/Outputs tab.

Last edit: Santiago Benejam Torres 2014-12-27

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
- Smasty - 2014-12-27
  
  Thank you very much, it works now.
  
  If you would like to refer to this comment somewhere else in this project, copy and paste the following link: