Timer in chase loosing control

Brought to you by: mcallegari79

This project can now be found here.

Timer in chase loosing control

Forum: [Read-Only] Issues, feedbacks and ideas

Creator: Jimmy T.

Created: 2014-09-30

Updated: 2014-10-01

Jimmy T. - 2014-09-30

Hi,

QLC 4.7.4 (OSX 10.9.5)

I created several scenes and put them into a chase. I then started the chase and it was way too fast as the timer was at 0 for duration. I adjusted the duration and then the chase would run normal on the last 4 parts but just quickly through the 1st 2 parts.

All durations were set the same, adjust duration, fade-in or fade-out had no affect on them.

I saved my workspace, close QLC and re-opened my workspace and the chase worked correctly.

If there is anything I can capture for you in that instance please let me know.

Thanks
Jimmy

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Anonymous - 2014-10-01

Hello,

You can start by uploading your workspace file here :)

If you would like to refer to this comment somewhere else in this project, copy and paste the following link: