Q Light Controller Plus / Forum / [Read-Only] Issues, feedbacks and ideas: Native Instruments Maschine MK1 Problem

Native Instruments Maschine MK1 Problem

Forum: [Read-Only] Issues, feedbacks and ideas

Created: 2013-11-07

Updated: 2013-11-12

Infu - 2013-11-07

Hi all!
NI Maschine MK1 in Midi mode.
QLC+ Windows version test OK, but QLC+ Mac version does not work with the controller.
This controller is working with other software in OSX environment(10.7.5).
Please help me!
THX!

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Massimo Callegari - 2013-11-08

Hi, please define the "does not work" statement.
Do you see it in the input/output panel ?
If so, when you move a fader or something on the controller, can you see the joystick blinking on QLC+ ?
What kind of MIDI signals does your controller send ? (Notes, CC, PC ?)

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Infu - 2013-11-09

Hello!
Thanks for the quick reply!
The joystick is not blinking.
Controller and QLC+ setup:
http://kepfeltoltes.hu/131109/Controller_setup_www.kepfeltoltes.hu_.png
http://kepfeltoltes.hu/view/131109/QLC__setup_www.kepfeltoltes.hu_.png

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Massimo Callegari - 2013-11-10

Hi, from what I see on your screenshots, your controller is sending MIDI data on channel 1. I guess it sends a mix of notes and Control Change.
Can you try to set the following on the QLC+ MIDI input configuration:
- MIDI Channel: 1
- Mode: Note Velocity

If you would like to refer to this comment somewhere else in this project, copy and paste the following link:

Infu - 2013-11-12

Hi!
I tried your settings.
Unfortunately that does not work. :(

If you would like to refer to this comment somewhere else in this project, copy and paste the following link: