Depending on how I toggle the switch, when creating a scene between tab view and all channel view, creates issues with the blind toggle as well. Has anyone experienced this? Is there a simple fix for it?
This is a simple test sequence that works in design mode, but not operate mode:
1. Function-scene editor.
2. Create scene using two dimmers.
3. Turn on all dimmer channels.
4. Switch to tab view.
5. Set levels on dimmer channels.
6. Test preview the scenes using design mode and fixture monitor...WORKS CORRECTLY.
7. Test preview of scenes using operate mode and fixture monitor...DOESN'T WORK.
This is a simple test sequence that doesn't work in design mode and has additional problems in operate mode:
1. Function-scene editor.
2. Create scene using two dimmers.
3. Turn on all dimmer channels.
4. Switch to all channel view.
5. Set levels on dimmer channels.
6. Test preview of scenes using design mode and fixture monitor...DOESN'T WORK.
7. Test preview of scenes using operate mode and fixture monitor...The scenes automatically toggle
blind and must be reset to normal. When you move onto another scene to check it, the previous
scene returns to toggle blind automatically.
I've programmed it several times, thinking I'm hitting the blind toggle icon switch when doing so and it's not the case. The choice you make when viewing your dimmers, either individually or all together, seems to automatically create an unintended choice of blind toggling upon review.
The problem is the same for 4.8.2 and 4.8.3 versions of the QLC+ running on Mac computers using
10.9.5 software versions. Also, the Mac computer driver is turned off for correct functioning across the DMX system.
Thanks,
Paul
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Anonymous
-
2015-01-28
Hi,
Thanks for the report.
Now fixed in git.
Cheers :)
PS:
Test preview of scenes using operate mode and fixture monitor...The scenes automatically toggle
blind and must be reset to normal. When you move onto another scene to check it, the previous
scene returns to toggle blind automatically.
This is the normal behavior.
We don't want to be "surprised" by a preview during operate mode.
What's been fixed is the "no preview in all-channel view"
Last edit: Anonymous 2015-01-28
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hello:
Depending on how I toggle the switch, when creating a scene between tab view and all channel view, creates issues with the blind toggle as well. Has anyone experienced this? Is there a simple fix for it?
This is a simple test sequence that works in design mode, but not operate mode:
1. Function-scene editor.
2. Create scene using two dimmers.
3. Turn on all dimmer channels.
4. Switch to tab view.
5. Set levels on dimmer channels.
6. Test preview the scenes using design mode and fixture monitor...WORKS CORRECTLY.
7. Test preview of scenes using operate mode and fixture monitor...DOESN'T WORK.
This is a simple test sequence that doesn't work in design mode and has additional problems in operate mode:
1. Function-scene editor.
2. Create scene using two dimmers.
3. Turn on all dimmer channels.
4. Switch to all channel view.
5. Set levels on dimmer channels.
6. Test preview of scenes using design mode and fixture monitor...DOESN'T WORK.
7. Test preview of scenes using operate mode and fixture monitor...The scenes automatically toggle
blind and must be reset to normal. When you move onto another scene to check it, the previous
scene returns to toggle blind automatically.
I've programmed it several times, thinking I'm hitting the blind toggle icon switch when doing so and it's not the case. The choice you make when viewing your dimmers, either individually or all together, seems to automatically create an unintended choice of blind toggling upon review.
The problem is the same for 4.8.2 and 4.8.3 versions of the QLC+ running on Mac computers using
10.9.5 software versions. Also, the Mac computer driver is turned off for correct functioning across the DMX system.
Thanks,
Paul
Hi,
Thanks for the report.
Now fixed in git.
Cheers :)
PS:
This is the normal behavior.
We don't want to be "surprised" by a preview during operate mode.
What's been fixed is the "no preview in all-channel view"
Last edit: Anonymous 2015-01-28
David,
I suppose your fix handles also this case: https://sourceforge.net/p/qlcplus/discussion/general/thread/2b98c1a5/
Am I right?
Jano,
Yes, you are right.