Thank Massimo for your work.
Sorry the event Bar as a Chinese appliance and DXM adressing is not the same of American DJ. I Have the same probleme with a Chinese copy of Clay Paky Sharpy.
I have making a fixture for Meng Ya Beam 5R 200W you do not have to integrated.
In contrast for DNA pro slim 18 you're right I forgot to mention the model but the following post is good Thank To Boxy.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I've added the missing modes and other information for the DNA fixture. There were a few French words in there too and the mode channels were in the wrong order.
Rodolfo, thanks for all your submissions, but do you realize that this thread is a mess ?
Now I don't understand which one I have to add, which one is good and which one is bad !
If you can clean up this thread I would appreciate it, and it would save me some time when I'll review all this stuff.
For example just update your first post with ALL the good attachments at once.
Thanks.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
OK, for now I've added everything (12 fixtures) except for:
Event-Bar_4LED-White.qxf
Rasha-Pro-Light-PAR-LED-3.qxf
Laserworld-RS400G.qxf
Martin-Mac 2000 Profile II.qxf
PR Lighting-PR 5000 Spot.qxf <-- same as martin profile II, please use bundled gobos !
Many thanks so far !
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
If you read the Fixtures sharing guidelines and apparently you haven't, you will find out that gobos are a delicate matter as most of them are covered by copyrights.
In your fixtures you used gobo pictures you donwloaded from somewhere and moreover you used absolute paths pointing to your computer.
This is totally NOT OK when sharing a fixture. So I rejected them.
QLC+ comes with 870 bundled gobos. If you use them you are sure they are OK.
If you don't use them, I need the written permission of the gobo creator to include them in QLC+.
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Ok for the rights to the images even gobos though I doubt they are protected.
But if I understand, I must find the equivalent in the gobo image library supplied with the program?
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
This is new Fixture of :
Starway - AXIS 250 16Bits.qxf
DNA-Pro Slim 18.qxf
Starway - FullKolor.qxf
Event-Bar_4LED-White.qxf
Starway - NanoKolor.qxf
Laserworld-RS400G.qxf
Starway - Servo Beam 5R.qxf
Martin-Destroyer.qxf
Starway - TourKolor.qxf
Rasha-Pro-Light-PAR-LED-3.qxf
Per Piacere Massimo metti questi nuovi Fixtures dentro il tuo Soft.
Grazie :)
Please insert this new fixture in your soft.
Thank
Hello Rodolfo. Thanks for these.
For now I've added the Starway fixtures. I just corrected a few typos like "Strob" and "Chanels".
Regarding the others:
- can you please provide a link to the Event Bar manual ? If it's the American DJ one it's already in the library
- please provide more details (manual as well) about the DNA fixture. In this page there are several Pro Slim 18
http://www.mhdiffusion.fr/?page=produits&cat=ECLAIRAGE%20ET%20DECORATION&fam=ECLAIRAGES%20LED&marque=DNA&PHPSESSID=cd833efcab6c239c2ec2cfbd1d5bb8bf
Thank Massimo for your work.
Sorry the event Bar as a Chinese appliance and DXM adressing is not the same of American DJ. I Have the same probleme with a Chinese copy of Clay Paky Sharpy.
I have making a fixture for Meng Ya Beam 5R 200W you do not have to integrated.
In contrast for DNA pro slim 18 you're right I forgot to mention the model but the following post is good Thank To Boxy.
I've added the missing modes and other information for the DNA fixture. There were a few French words in there too and the mode channels were in the wrong order.
Thank Boxy
Now here the good Fixture for MARTIN MAC 2000 Profile II
Enjoy
Now here the good Fixture for MARTIN MAC 600 NT
Enjoy
Now here the good Fixture for STARWAY SERVOCOLOR 800
Enjoy
Sorry this one is better STARWAY SERVOCOLOR 600
Now here the good Fixture for VARI VARI-LITE VL2500 Wash
Enjoy
Fixture for PR 5000 Spot
http://www.pr-lighting.com/show.php?id=112
Now here the good Fixture for MARTIN Jem K1 Hazer
Enjoy
Please Massimo put this fixture in your program .
Many smoke machine use the same fixture.
Thank
Last edit: RODOLFO 2014-11-27
Rodolfo, thanks for all your submissions, but do you realize that this thread is a mess ?
Now I don't understand which one I have to add, which one is good and which one is bad !
If you can clean up this thread I would appreciate it, and it would save me some time when I'll review all this stuff.
For example just update your first post with ALL the good attachments at once.
Thanks.
what do you want a topic for fixtures?
tell me what you want and I'll do ok?
Thank
The ideal thing would be one single post (or 2 if there is too much stuff) with this:
etc...
And all the attachments
Thanks
Martin-Mac 2000 Profile II not accepted. You downloaded gobos from the Martin site. Please use the bundled ones.
OK, for now I've added everything (12 fixtures) except for:
Event-Bar_4LED-White.qxf
Rasha-Pro-Light-PAR-LED-3.qxf
Laserworld-RS400G.qxf
Martin-Mac 2000 Profile II.qxf
PR Lighting-PR 5000 Spot.qxf <-- same as martin profile II, please use bundled gobos !
Many thanks so far !
Hello Massimo,
I'm sorry I have not had time to cleaning this post but I'll do it as soon as possible.
thank you
please use bundled gobos !
I don't understand please explains me
If you read the Fixtures sharing guidelines and apparently you haven't, you will find out that gobos are a delicate matter as most of them are covered by copyrights.
In your fixtures you used gobo pictures you donwloaded from somewhere and moreover you used absolute paths pointing to your computer.
This is totally NOT OK when sharing a fixture. So I rejected them.
QLC+ comes with 870 bundled gobos. If you use them you are sure they are OK.
If you don't use them, I need the written permission of the gobo creator to include them in QLC+.
Ok for the rights to the images even gobos though I doubt they are protected.
But if I understand, I must find the equivalent in the gobo image library supplied with the program?
That would be great, yes
Ok this is changed, can you tell me what is wrong with the Laserworld-RS400G ?
Nothing. I haven't had the time to review it yet.