Re: [Pyusb-users] pyusb 0.4.1-2.fc10.i386 does not detect Lego NXT brick ...

SourceForge Headquarters 225 Broadway Suite 1600 San Diego, CA 92101 +1 (858) 422-6466

The following (http://nxt.ivorycity.com/) seems to work:
As root, create /etc/udev/rules.d/70-lego.rules containing:

  # Lego NXT 
  BUS=="usb", SYSFS{idVendor}=="0694", MODE="0666"

(1st two operators are comparisons "==", 3rd is assignment "=")
Hope this helps someone else.
Thanks for the bandwidth.

- Mike

On Tue, 2009-03-17 at 10:44 -0700, Michael Ward wrote:
> Seems that I'm having a permissions/sucurity problem. 
> When I run usbenum as root it finds the device.  
> When I run usbenum as a normal user, it does not.
> Perhaps I need to add a line to /etc/fstab or something?
> Anyone know what to do here?
> 
> Thanks,
> 
> - Mike
> 
> On Thu, 2009-03-12 at 14:09 -0300, Wander Lairson wrote:
> > Actually I don't know if lsusb uses libusb or usbdevfs directly..
> > Later I will download the source code and take a look...
> > 
> > Wander
> > 
> > 2009/3/12 Michael Ward <mic...@sp...>:
> > > Wander,
> > >
> > > Thanks for the reply.
> > > Indeed, it does not show up with lsusb: (does this use libusb?)
> > >
> > > [mike@Multivector ~]$ lsusb
> > > Bus 001 Device 004: ID 0bda:0111 Realtek Semiconductor Corp. Card Reader
> > > Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
> > > Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > > Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > > Bus 003 Device 004: ID 08e6:0432 Gemplus GemPC432 SmartCard Reader
> > > Bus 003 Device 003: ID 049f:000e Compaq Computer Corp. Internet Keyboard
> > > Bus 003 Device 002: ID 0451:2036 Texas Instruments, Inc. TUSB2036 Hub
> > > Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > > Bus 002 Device 002: ID 046d:c401 Logitech, Inc. TrackMan Marble Wheel
> > > Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
> > > [mike@Multivector ~]$
> > >
> > > I have version 0.1.12 of libusb installed under fedora 10.  I quess I'll
> > > try version 1.0 next.
> > >
> > > - Mike
> > >
> > > On Thu, 2009-03-12 at 08:02 -0300, Wander Lairson wrote:
> > >> Please, try it with lsusb command. If it works, it maybe a PyUSB or
> > >> libusb issue. Would you mind trying to build a little C program T
> > >> check it? It the C program works, it is probably a PyUSB issue. In
> > >> this case, please, open a bug request in SF, informing the PyUSB and
> > >> libusb versions.
> > >>
> > >> Best regards,
> > >> Wander
> > >>
> > >> 2009/3/11 Michael Ward <mic...@sp...>:
> > >> > If anyone can give me a clue as to how to fix this, I'd sure appreciate
> > >> > it.  When I cat /proc/bus/usb/devices, the NXT shows up (on bus 4) with
> > >> > the expected vendor (0x0694) and product (0x0002) numbers, but not when
> > >> > I run a modified usbenum program.
> > >> >
> > >> > The data follows.
> > >> >
> > >> > Thanks,
> > >> > - Mike
> > >> >
> > >> > usbenum program:
> > >> > ---------------
> > >> > #!/usr/bin/env python
> > >> > #
> > >> > # Enumerate usb devices
> > >> > #
> > >> > #Copyright 2005 Wander Lairson Costa
> > >> >
> > >> > import usb
> > >> >
> > >> > busses = usb.busses()
> > >> >
> > >> > for bus in busses:
> > >> >  devices = bus.devices
> > >> >  print "=== new bus ==="
> > >> >  for dev in devices:
> > >> >    print "Device:", dev.filename
> > >> >    print "  Device class:",dev.deviceClass
> > >> >    print "  Device sub class:",dev.deviceSubClass
> > >> >    print "  Device protocol:",dev.deviceProtocol
> > >> >    print "  Max packet size:",dev.maxPacketSize
> > >> >    print "  idVendor: %d (0x%x)" % (dev.idVendor,dev.idVendor)
> > >> >    print "  idProduct: %d (0x%x)" % (dev.idProduct,dev.idProduct)
> > >> >    print "  Device Version:",dev.deviceVersion
> > >> >    for config in dev.configurations:
> > >> >      print "  Configuration:", config.value
> > >> >      print "    Total length:", config.totalLength
> > >> >      print "    selfPowered:", config.selfPowered
> > >> >      print "    remoteWakeup:", config.remoteWakeup
> > >> >      print "    maxPower:", config.maxPower
> > >> >      for intf in config.interfaces:
> > >> >        print "    Interface:",intf[0].interfaceNumber
> > >> >        for alt in intf:
> > >> >          print "    Alternate Setting:",alt.alternateSetting
> > >> >          print "      Interface class:",alt.interfaceClass
> > >> >          print "      Interface sub class:",alt.interfaceSubClass
> > >> >          print "      Interface protocol:",alt.interfaceProtocol
> > >> >          for ep in alt.endpoints:
> > >> >            print "      Endpoint:",hex(ep.address)
> > >> >            print "        Type:",ep.type
> > >> >            print "        Max packet size:",ep.maxPacketSize
> > >> >            print "        Interval:",ep.interval
> > >> >
> > >> > usbenum output:
> > >> > --------------
> > >> > === new bus ===
> > >> > Device: 004
> > >> >  Device class: 0
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 64
> > >> >  idVendor: 3034 (0xbda)
> > >> >  idProduct: 273 (0x111)
> > >> >  Device Version: 11.37
> > >> >  Configuration: 1
> > >> >    Total length: 32
> > >> >    selfPowered: 0
> > >> >    remoteWakeup: 0
> > >> >    maxPower: 232
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 8
> > >> >      Interface sub class: 6
> > >> >      Interface protocol: 80
> > >> >      Endpoint: 0x1L
> > >> >        Type: 2
> > >> >        Max packet size: 512
> > >> >        Interval: 0
> > >> >      Endpoint: 0x82L
> > >> >        Type: 2
> > >> >        Max packet size: 512
> > >> >        Interval: 0
> > >> > Device: 001
> > >> >  Device class: 9
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 64
> > >> >  idVendor: 7531 (0x1d6b)
> > >> >  idProduct: 2 (0x2)
> > >> >  Device Version: 02.06
> > >> >  Configuration: 1
> > >> >    Total length: 25
> > >> >    selfPowered: 1
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 0
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 9
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 4
> > >> >        Interval: 12
> > >> > === new bus ===
> > >> > Device: 001
> > >> >  Device class: 9
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 64
> > >> >  idVendor: 7531 (0x1d6b)
> > >> >  idProduct: 1 (0x1)
> > >> >  Device Version: 02.06
> > >> >  Configuration: 1
> > >> >    Total length: 25
> > >> >    selfPowered: 1
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 0
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 9
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 2
> > >> >        Interval: 255
> > >> > === new bus ===
> > >> > Device: 001
> > >> >  Device class: 9
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 64
> > >> >  idVendor: 7531 (0x1d6b)
> > >> >  idProduct: 1 (0x1)
> > >> >  Device Version: 02.06
> > >> >  Configuration: 1
> > >> >    Total length: 25
> > >> >    selfPowered: 1
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 0
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 9
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 2
> > >> >        Interval: 255
> > >> > === new bus ===
> > >> > Device: 004
> > >> >  Device class: 0
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 8
> > >> >  idVendor: 2278 (0x8e6)
> > >> >  idProduct: 1074 (0x432)
> > >> >  Device Version: 01.00
> > >> >  Configuration: 1
> > >> >    Total length: 32
> > >> >    selfPowered: 0
> > >> >    remoteWakeup: 0
> > >> >    maxPower: 200
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 255
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x85L
> > >> >        Type: 2
> > >> >        Max packet size: 64
> > >> >        Interval: 255
> > >> >      Endpoint: 0x6L
> > >> >        Type: 2
> > >> >        Max packet size: 64
> > >> >        Interval: 255
> > >> > Device: 003
> > >> >  Device class: 0
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 8
> > >> >  idVendor: 1183 (0x49f)
> > >> >  idProduct: 14 (0xe)
> > >> >  Device Version: 01.02
> > >> >  Configuration: 1
> > >> >    Total length: 59
> > >> >    selfPowered: 0
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 200
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 3
> > >> >      Interface sub class: 1
> > >> >      Interface protocol: 1
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 8
> > >> >        Interval: 10
> > >> >    Interface: 1
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 3
> > >> >      Interface sub class: 1
> > >> >      Interface protocol: 2
> > >> >      Endpoint: 0x82L
> > >> >        Type: 3
> > >> >        Max packet size: 8
> > >> >        Interval: 10
> > >> > Device: 002
> > >> >  Device class: 9
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 8
> > >> >  idVendor: 1105 (0x451)
> > >> >  idProduct: 8246 (0x2036)
> > >> >  Device Version: 01.01
> > >> >  Configuration: 1
> > >> >    Total length: 25
> > >> >    selfPowered: 0
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 200
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 9
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 1
> > >> >        Interval: 255
> > >> > Device: 001
> > >> >  Device class: 9
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 64
> > >> >  idVendor: 7531 (0x1d6b)
> > >> >  idProduct: 1 (0x1)
> > >> >  Device Version: 02.06
> > >> >  Configuration: 1
> > >> >    Total length: 25
> > >> >    selfPowered: 1
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 0
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 9
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 2
> > >> >        Interval: 255
> > >> > === new bus ===
> > >> > Device: 002
> > >> >  Device class: 0
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 8
> > >> >  idVendor: 1133 (0x46d)
> > >> >  idProduct: 50177 (0xc401)
> > >> >  Device Version: 02.10
> > >> >  Configuration: 1
> > >> >    Total length: 34
> > >> >    selfPowered: 0
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 100
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 3
> > >> >      Interface sub class: 1
> > >> >      Interface protocol: 2
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 8
> > >> >        Interval: 10
> > >> > Device: 001
> > >> >  Device class: 9
> > >> >  Device sub class: 0
> > >> >  Device protocol: 0
> > >> >  Max packet size: 64
> > >> >  idVendor: 7531 (0x1d6b)
> > >> >  idProduct: 1 (0x1)
> > >> >  Device Version: 02.06
> > >> >  Configuration: 1
> > >> >    Total length: 25
> > >> >    selfPowered: 1
> > >> >    remoteWakeup: 1
> > >> >    maxPower: 0
> > >> >    Interface: 0
> > >> >    Alternate Setting: 0
> > >> >      Interface class: 9
> > >> >      Interface sub class: 0
> > >> >      Interface protocol: 0
> > >> >      Endpoint: 0x81L
> > >> >        Type: 3
> > >> >        Max packet size: 2
> > >> >        Interval: 255
> > >> >
> > >> > /proc/bus/usb/devices
> > >> > ---------------------
> > >> >
> > >> > T:  Bus=05 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > >> > B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> > >> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > >> > P:  Vendor=1d6b ProdID=0001 Rev= 2.06
> > >> > S:  Manufacturer=Linux 2.6.27.19-170.2.35.fc10.i686.PAE uhci_hcd
> > >> > S:  Product=UHCI Host Controller
> > >> > S:  SerialNumber=0000:00:1d.3
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> > >> >
> > >> > T:  Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > >> > B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
> > >> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > >> > P:  Vendor=1d6b ProdID=0001 Rev= 2.06
> > >> > S:  Manufacturer=Linux 2.6.27.19-170.2.35.fc10.i686.PAE uhci_hcd
> > >> > S:  Product=UHCI Host Controller
> > >> > S:  SerialNumber=0000:00:1d.2
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> > >> >
> > >> > T:  Bus=04 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  5 Spd=12  MxCh= 0
> > >> > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > >> > P:  Vendor=0694 ProdID=0002 Rev= 0.00
> > >> > S:  SerialNumber=00165301DB1E
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=  0mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
> > >> > E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > >> > E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > >> >
> > >> > T:  Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > >> > B:  Alloc= 29/900 us ( 3%), #Int=  3, #Iso=  0
> > >> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > >> > P:  Vendor=1d6b ProdID=0001 Rev= 2.06
> > >> > S:  Manufacturer=Linux 2.6.27.19-170.2.35.fc10.i686.PAE uhci_hcd
> > >> > S:  Product=UHCI Host Controller
> > >> > S:  SerialNumber=0000:00:1d.1
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> > >> >
> > >> > T:  Bus=03 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=12  MxCh= 2
> > >> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > >> > P:  Vendor=0451 ProdID=2036 Rev= 1.01
> > >> > S:  Product=General Purpose USB Hub
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   1 Ivl=255ms
> > >> >
> > >> > T:  Bus=03 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#=  3 Spd=1.5 MxCh= 0
> > >> > D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > >> > P:  Vendor=049f ProdID=000e Rev= 1.02
> > >> > S:  Manufacturer=Chicony
> > >> > S:  Product=Compaq Internet Keyboard
> > >> > C:* #Ifs= 2 Cfg#= 1 Atr=a0 MxPwr=100mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=01 Driver=usbhid
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> > >> > I:* If#= 1 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
> > >> > E:  Ad=82(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> > >> >
> > >> > T:  Bus=03 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#=  4 Spd=12  MxCh= 0
> > >> > D:  Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > >> > P:  Vendor=08e6 ProdID=0432 Rev= 1.00
> > >> > S:  Manufacturer=GEMPLUS
> > >> > S:  Product=Visa Usb Smart Card Reader GCR432
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=100mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
> > >> > E:  Ad=85(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > >> > E:  Ad=06(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
> > >> >
> > >> > T:  Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
> > >> > B:  Alloc= 14/900 us ( 2%), #Int=  1, #Iso=  0
> > >> > D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > >> > P:  Vendor=1d6b ProdID=0001 Rev= 2.06
> > >> > S:  Manufacturer=Linux 2.6.27.19-170.2.35.fc10.i686.PAE uhci_hcd
> > >> > S:  Product=UHCI Host Controller
> > >> > S:  SerialNumber=0000:00:1d.0
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
> > >> >
> > >> > T:  Bus=02 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#=  2 Spd=1.5 MxCh= 0
> > >> > D:  Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
> > >> > P:  Vendor=046d ProdID=c401 Rev= 2.10
> > >> > S:  Manufacturer=Logitech
> > >> > S:  Product=USB-PS/2 Trackball
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=03(HID  ) Sub=01 Prot=02 Driver=usbhid
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   8 Ivl=10ms
> > >> >
> > >> > T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=480 MxCh= 8
> > >> > B:  Alloc=  0/800 us ( 0%), #Int=  0, #Iso=  0
> > >> > D:  Ver= 2.00 Cls=09(hub  ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > >> > P:  Vendor=1d6b ProdID=0002 Rev= 2.06
> > >> > S:  Manufacturer=Linux 2.6.27.19-170.2.35.fc10.i686.PAE ehci_hcd
> > >> > S:  Product=EHCI Host Controller
> > >> > S:  SerialNumber=0000:00:1d.7
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr=  0mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
> > >> > E:  Ad=81(I) Atr=03(Int.) MxPS=   4 Ivl=256ms
> > >> >
> > >> > T:  Bus=01 Lev=01 Prnt=01 Port=07 Cnt=01 Dev#=  4 Spd=480 MxCh= 0
> > >> > D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
> > >> > P:  Vendor=0bda ProdID=0111 Rev=11.37
> > >> > S:  Manufacturer=Generic
> > >> > S:  Product=USB2.0-CRW
> > >> > S:  SerialNumber=20021111153705700
> > >> > C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=500mA
> > >> > I:* If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
> > >> > Driver=usb-storage
> > >> > E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > >> > E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
> > >> >
> > >> >
> > >> >
> > >> > ------------------------------------------------------------------------------
> > >> > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> > >> > powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> > >> > easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> > >> > software that enables intelligent coding and step-through debugging.
> > >> > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> > >> > _______________________________________________
> > >> > Pyusb-users mailing list
> > >> > Pyu...@li...
> > >> > https://lists.sourceforge.net/lists/listinfo/pyusb-users
> > >> >
> > >>
> > >> ------------------------------------------------------------------------------
> > >> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> > >> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> > >> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> > >> software that enables intelligent coding and step-through debugging.
> > >> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> > >> _______________________________________________
> > >> Pyusb-users mailing list
> > >> Pyu...@li...
> > >> https://lists.sourceforge.net/lists/listinfo/pyusb-users
> > >
> > 
> > ------------------------------------------------------------------------------
> > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> > powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> > easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> > software that enables intelligent coding and step-through debugging.
> > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> > _______________________________________________
> > Pyusb-users mailing list
> > Pyu...@li...
> > https://lists.sourceforge.net/lists/listinfo/pyusb-users
> 
> ------------------------------------------------------------------------------
> Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are
> powering Web 2.0 with engaging, cross-platform capabilities. Quickly and
> easily build your RIAs with Flex Builder, the Eclipse(TM)based development
> software that enables intelligent coding and step-through debugging.
> Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com
> _______________________________________________
> Pyusb-users mailing list
> Pyu...@li...
> https://lists.sourceforge.net/lists/listinfo/pyusb-users