Menu
▾
▴
pyscard-devel
|
From: <lu...@us...> - 2009-04-18 08:07:17
|
Revision: 283
http://pyscard.svn.sourceforge.net/pyscard/?rev=283&view=rev
Author: ludov
Date: 2009-04-18 08:07:15 +0000 (Sat, 18 Apr 2009)
Log Message:
-----------
set svn:executable
Property Changed:
----------------
trunk/contrib/parseATR/parseATR.py
Property changes on: trunk/contrib/parseATR/parseATR.py
___________________________________________________________________
Added: svn:executable
+ *
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-06-08 15:50:01
|
Revision: 286
http://pyscard.svn.sourceforge.net/pyscard/?rev=286&view=rev
Author: ludov
Date: 2009-06-08 13:54:54 +0000 (Mon, 08 Jun 2009)
Log Message:
-----------
debug historic bytes parsing
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-06-08 13:36:32 UTC (rev 285)
+++ trunk/contrib/parseATR/parseATR.py 2009-06-08 13:54:54 UTC (rev 286)
@@ -238,16 +238,18 @@
tag = tlv / 16
len = tlv % 16
+ text += " Tag: %d, Len: %d" % (tag, len)
+
if tag == 1:
- text += " (country code, ISO 3166-1)"
+ text += " (country code, ISO 3166-1)\n"
text += " Country code: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
elif tag == 2:
- text += " (issuer identification number, ISO 7812-1)";
+ text += " (issuer identification number, ISO 7812-1)\n";
text += " Issuer identification number: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
elif tag == 3:
- text += " (card service data byte)"
+ text += " (card service data byte)\n"
cs = historical_bytes.pop(0)
if cs == None:
text += " Error in the ATR: expecting 1 byte and got 0"
@@ -256,19 +258,19 @@
text += cs(cs)
elif tag == 4:
- text += " (initial access data)"
+ text += " (initial access data)\n"
text += " Initial access data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
elif tag == 5:
- text += " (card issuer's data)"
+ text += " (card issuer's data)\n"
text += " Card issuer data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
elif tag == 6:
- text += " (pre-issuing data)"
+ text += " (pre-issuing data)\n"
text += " Data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
elif tag == 7:
- text += " (card capabilities)"
+ text += " (card capabilities)\n"
if len == 1:
sm = historical_bytes.pop(0)
text += " Selection methods: %d" % sm
@@ -294,7 +296,7 @@
text += " wrong ATR"
elif tag == 8:
- text += " (status indicator)"
+ text += " (status indicator)\n"
if len == 1:
lcs = historical_bytes.pop(0)
text += " LCS (life card cycle): %d" % lcs
@@ -310,13 +312,17 @@
text += " SW: %02X %02X" % (sw1, sw2)
elif tag == 15:
- text += " (application identifier)"
+ text += " (application identifier)\n"
text += " Application identifier: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
else:
- text += " (unknown)"
+ text += " (unknown)\n"
text += " Value: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ # consume len bytes of historic
+ for i in range(len):
+ historical_bytes.pop(0)
+
return text
def analyse_histrorical_bytes(historical_bytes):
@@ -327,6 +333,8 @@
if hb_category == None:
return text
+ text += " Category indicator byte: %02X" % hb_category
+
if hb_category == 0x00:
text += " (compact TLV data object)\n";
@@ -347,7 +355,7 @@
text += " SW: %02X%02X (%s)" % (sw1, sw1, "") #Chipcard::PCSC::Card::ISO7816Error("$sw1 $sw2"))
elif hb_category == 0x80:
- text += " (compact TLV data object)"
+ text += " (compact TLV data object)\n"
while len(historical_bytes) > 0:
text += compact_tlv(historical_bytes)
@@ -388,6 +396,7 @@
print "Historical bytes: ",
for b in atr["hb"]:
print "0x%02X" % b,
+ print
print analyse_histrorical_bytes(atr["hb"])
if __name__ == "__main__":
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-06-09 14:05:18
|
Revision: 287
http://pyscard.svn.sourceforge.net/pyscard/?rev=287&view=rev
Author: ludov
Date: 2009-06-09 13:56:33 +0000 (Tue, 09 Jun 2009)
Log Message:
-----------
more debug
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-06-08 13:54:54 UTC (rev 286)
+++ trunk/contrib/parseATR/parseATR.py 2009-06-09 13:56:33 UTC (rev 287)
@@ -47,6 +47,10 @@
def parseATR(atr_txt):
atr_txt = normalize(atr_txt)
atr = {}
+
+ # the ATR itself as a list of integers
+ atr["atr"] = atr_txt
+
# store TS and T0
atr["TS"] = atr_txt[0]
atr["T0"] = TDi = atr_txt[1]
@@ -91,7 +95,7 @@
# Store TCK
if (atr.has_key("TCK")):
- atr["TCK"] = atr_txt[pointer]
+ atr["TCK"] = atr_txt[-1]
return atr
@@ -106,16 +110,16 @@
def TA2(v):
F = v >> 4
D = v & 0xF
- text = "Protocol to be used in spec mode: T=%s" % (D),
+ text = "Protocol to be used in spec mode: T=%s" % (D)
if (F & 0x8):
- text = text + " - Unable to change",
+ text += " - Unable to change"
else:
- text = text + " - Capable to change",
+ text += " - Capable to change"
if (F & 0x1):
- text = text + " - implicity defined"
+ text += " - implicity defined"
else:
- text = text + " - defined by interface bytes"
+ text += " - defined by interface bytes"
return text
@@ -181,9 +185,9 @@
return text
def TC1(v):
- text = "Extra guard time:", v,
+ text = "Extra guard time: %d" % v
if (v == 255):
- text += "(special value)"
+ text += " (special value)"
return text
def TC2(v):
@@ -198,9 +202,9 @@
def TCn(i, v):
text = ""
if (T == 1):
- text = "Error detection code: ",
+ text = "Error detection code: "
if (v == 1):
- text += "CRC";
+ text += "CRC"
else:
if (v == 0):
text += "LRC"
@@ -333,7 +337,7 @@
if hb_category == None:
return text
- text += " Category indicator byte: %02X" % hb_category
+ text += " Category indicator byte: 0x%02X" % hb_category
if hb_category == 0x00:
text += " (compact TLV data object)\n";
@@ -372,6 +376,15 @@
return text
+def compute_tck(atr):
+ # do not include TS byte
+ s = atr["atr"][0];
+ for e in atr["atr"]:
+ s ^= e
+ # remove TCK
+ s ^= atr["atr"][-1];
+ return s
+
def atr_display_txt(atr):
TS = {0x3B: "Direct Convention", 0x3F: "Inverse Convention"}
print "TS = 0x%02X --> %s" % (atr["TS"], TS[atr["TS"]])
@@ -398,8 +411,18 @@
print "0x%02X" % b,
print
print analyse_histrorical_bytes(atr["hb"])
-
+
+ if (atr.has_key("TCK")):
+ print ("TCK = 0x%02X" % atr["TCK"]),
+ tck = compute_tck(atr)
+ if tck == atr["TCK"]:
+ print "(correct checksum)"
+ else:
+ print "WRONG CHECKSUM, expected 0x%02X" % tck
+
if __name__ == "__main__":
- atr = parseATR("3B A7 00 40 18 80 65 A2 08 01 01 52")
- #atr = parseATR("3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42")
+ #ATR = "3B A7 00 40 18 80 65 A2 08 01 01 52"
+ ATR = "3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 36 4E"
+ atr = parseATR(ATR)
+ print "ATR:", ATR
atr_display_txt(atr)
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-06-09 14:23:10
|
Revision: 288
http://pyscard.svn.sourceforge.net/pyscard/?rev=288&view=rev
Author: ludov
Date: 2009-06-09 14:22:58 +0000 (Tue, 09 Jun 2009)
Log Message:
-----------
use command line arguments
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-06-09 13:56:33 UTC (rev 287)
+++ trunk/contrib/parseATR/parseATR.py 2009-06-09 14:22:58 UTC (rev 288)
@@ -421,8 +421,12 @@
print "WRONG CHECKSUM, expected 0x%02X" % tck
if __name__ == "__main__":
- #ATR = "3B A7 00 40 18 80 65 A2 08 01 01 52"
- ATR = "3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 36 4E"
+ import sys
+ if len(sys.argv) > 1:
+ ATR = " ".join(sys.argv[1:])
+ else:
+ #ATR = "3B A7 00 40 18 80 65 A2 08 01 01 52"
+ ATR = "3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 36 4E"
atr = parseATR(ATR)
print "ATR:", ATR
atr_display_txt(atr)
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-06-16 19:05:57
|
Revision: 293
http://pyscard.svn.sourceforge.net/pyscard/?rev=293&view=rev
Author: ludov
Date: 2009-06-16 12:49:49 +0000 (Tue, 16 Jun 2009)
Log Message:
-----------
more debug
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-06-14 12:20:19 UTC (rev 292)
+++ trunk/contrib/parseATR/parseATR.py 2009-06-16 12:49:49 UTC (rev 293)
@@ -54,6 +54,7 @@
# store TS and T0
atr["TS"] = atr_txt[0]
atr["T0"] = TDi = atr_txt[1]
+ hb_length = atr["T0"] & 15
pointer = 1
# protocol number
pn = 1
@@ -91,7 +92,10 @@
atr["pn"] = pn
# Store historical bytes
- atr["hb"] = atr_txt[pointer+1:]
+ atr["hb"] = atr_txt[pointer+1:pointer+1+hb_length]
+
+ if len(atr["hb"]) < hb_length:
+ raise Exception("ERROR! ATR is truncated: %d byte(s) is/are missing" % (hb_length-len(atr["hb"])))
# Store TCK
if (atr.has_key("TCK")):
@@ -110,18 +114,18 @@
def TA2(v):
F = v >> 4
D = v & 0xF
- text = "Protocol to be used in spec mode: T=%s" % (D)
+ text = ["Protocol to be used in spec mode: T=%s" % (D)]
if (F & 0x8):
- text += " - Unable to change"
+ text.append(" - Unable to change")
else:
- text += " - Capable to change"
+ text.append(" - Capable to change")
if (F & 0x1):
- text += " - implicity defined"
+ text.append(" - implicity defined")
else:
- text += " - defined by interface bytes"
+ text.append(" - defined by interface bytes")
- return text
+ return ''.join(text)
def TA3(v):
return TAn(3, v)
@@ -136,20 +140,20 @@
else:
F = v >> 6
D = v % 64
- Class = "(3G) "
+ Class = ["(3G) "]
if (D & 0x1):
- Class += "A 5V "
+ Class.append("A 5V ")
if (D & 0x2):
- Class += "B 3V "
+ Class.append("B 3V ")
if (D & 0x4):
- Class += "C 1.8V "
+ Class.append("C 1.8V ")
if (D & 0x8):
- Class += "D RFU "
+ Class.append("D RFU ")
if (D & 0x10):
- Class += "E RFU"
+ Class.append("E RFU")
- text = "Clock stop: %s - Class accepted by the card: %s" % (XI[F],Class)
+ text = "Clock stop: %s - Class accepted by the card: %s" % (XI[F],''.join(Class))
return text
def TB1(v):
@@ -162,12 +166,12 @@
return text
def TB2(v):
- text = "Programming param PI2 (PI1 should be ignored): %d" % v,
+ text = ["Programming param PI2 (PI1 should be ignored): %d" % v,]
if ((v>49) or (v<251)):
- text += " (dV)"
+ text.append(" (dV)")
else:
- text += " is RFU"
- return text
+ text.append(" is RFU")
+ return ''.join(text)
def TB3(v):
return TBn(3, v)
@@ -185,10 +189,10 @@
return text
def TC1(v):
- text = "Extra guard time: %d" % v
+ text = ["Extra guard time: %d" % v]
if (v == 255):
- text += " (special value)"
- return text
+ text.append(" (special value)")
+ return ''.join(text)
def TC2(v):
return "Work waiting time: 960 x %d x (Fi/F)" % v
@@ -200,17 +204,17 @@
return TCn(4, v)
def TCn(i, v):
- text = ""
+ text = []
if (T == 1):
- text = "Error detection code: "
+ text.append("Error detection code: ")
if (v == 1):
- text += "CRC"
+ text.append("CRC")
else:
if (v == 0):
- text += "LRC"
+ text.append("LRC")
else:
- text += "RFU"
- return text
+ text.append("RFU")
+ return ''.join(text)
def TD1(v):
return TDn(1, v)
@@ -231,6 +235,169 @@
text = "Y(i+1) = b%s, Protocol T=%d" % (int2bin(Y,4), T)
return text
+def life_cycle_status(lcs):
+ # Table 13 - Life cycle status byte
+ # ISO 7816-4:2004, page 21
+ if lcs > 15:
+ text = "Proprietary"
+
+ if lcs == 0:
+ text = "No information given"
+ if lcs == 1:
+ text = "Creation state"
+ if lcs == 3:
+ text = "Initialisation state"
+ if lcs in [4, 6]:
+ text = "Operational state (deactivated)"
+ if lcs in [5, 7]:
+ text = "Operational state (activated)"
+ if lcs in [12, 13, 14, 15]:
+ text = "Termination state"
+
+ return text
+
+def data_coding(dc):
+ # Table 87 - Second software function table (data coding byte)
+ # ISO 7816-4:2004, page 60
+ text = []
+
+ if dc & 128:
+ text.append(" - EF of TLV structure supported\n")
+
+ # get bits 6 and 7
+ text.append(" - Behaviour of write functions: ")
+ v = (dc & (64+32)) >> 5
+ t = ["one-time write\n", "proprietary\n", "write OR\n", "write AND\n"]
+ text.append(t[v])
+
+ text.append(" - Value 'FF' for the first byte of BER-TLV tag fields: ")
+ if dc & 16:
+ text.append("in")
+ text.append("valid\n")
+
+ text.append(" - Data unit in quartets: %d" % (dc & 15))
+
+ return ''.join(text)
+
+def selection_methods(sm):
+ # Table 86 - First software function table (selection methods)
+ # ISO 7816-4:2004, page 60
+ text = []
+
+ if sm & 1:
+ text.append(" - Record identifier supported\n")
+
+ if sm & 2:
+ text.append(" - Record number supported\n")
+
+ if sm & 4:
+ text.append(" - Short EF identifier supported\n")
+
+ if sm & 8:
+ text.append(" - Implicit DF selection\n")
+
+ if sm & 16:
+ text.append(" - DF selection by file identifier\n")
+
+ if sm & 32:
+ text.append(" - DF selection by path\n")
+
+ if sm & 64:
+ text.append(" - DF selection by partial DF name\n")
+
+ if sm & 128:
+ text.append(" - DF selection by full DF name\n")
+
+ return ''.join(text)
+
+def selection_mode(sm):
+ # Table 87 - Second software function table (data coding byte)
+ # ISO 7816-4:2004, page 60
+ text = []
+
+ if sm & 1:
+ text.append(" - Record identifier supported\n")
+
+ if sm & 2:
+ text.append(" - Record number supported\n")
+
+ if sm & 4:
+ text.append(" - Short EF identifier supported\n")
+
+ if sm & 8:
+ text.append(" - Implicit DF selection\n")
+
+ if sm & 16:
+ text.append(" - DF selection by file identifier\n")
+
+ if sm & 32:
+ text.append(" - DF selection by path\n")
+
+ if sm & 64:
+ text.append(" - DF selection by partial DF name\n")
+
+ if sm & 128:
+ text.append(" - DF selection by full DF name\n")
+
+ return ''.join(text)
+
+def command_chaining(cc):
+ # Table 88 - Third software function table (command chaining, length fields and logical channels)
+ # ISO 7816-4:2004, page 61
+ text = []
+
+ if cc & 128:
+ text.append(" - Command chaining\n")
+
+ if cc & 64:
+ text.append(" - Extended Lc and Le fields\n")
+
+ if cc & 32:
+ text.append(" - RFU (should not happen)\n")
+
+ v = (cc >> 3) & 3
+ t = ["No logical channel\n", "by the interface device\n", "by the card\n", "by the interface device and card\n"]
+ text.append(t[v])
+
+ text.append(" - Maximum number of logical channels: %d\n" % (cc & 7))
+
+ return ''.join(text)
+
+def card_service(cs):
+ # Table 85 - Card service data byte
+ # ISO 7816-4:2004, page 59
+ text = []
+
+ if cs & 128:
+ text.append(" - Application selection: by full DF name\n")
+
+ if cs & 64:
+ text.append(" - Application selection: by partial DF name\n")
+
+ if cs & 32:
+ text.append(" - BER-TLV data objects available in EF.DIR\n")
+
+ if cs & 16:
+ text.append(" - BER-TLV data objects available in EF.ATR\n")
+
+ text.append(" - EF.DIR and EF.ATR access services: ")
+ v = (cs >> 1) & 7
+ if v == 4:
+ text.append("by READ BINARY command\n")
+ elif v == 2:
+ text.append("by GET DATA command\n")
+ elif v == 0:
+ text.append("by GET RECORD(s) command\n")
+ else:
+ text.append("reverved for future use\n")
+
+ if cs & 1:
+ text.append(" - Card without MF\n")
+ else:
+ text.append(" - Card with MF\n")
+
+ return ''.join(text)
+
def compact_tlv(historical_bytes):
text = ""
tlv = historical_bytes.pop(0)
@@ -242,137 +409,146 @@
tag = tlv / 16
len = tlv % 16
- text += " Tag: %d, Len: %d" % (tag, len)
+ text = []
+ text.append(" Tag: %d, Len: %d" % (tag, len))
if tag == 1:
- text += " (country code, ISO 3166-1)\n"
- text += " Country code: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (country code, ISO 3166-1)\n")
+ text.append(" Country code: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
elif tag == 2:
- text += " (issuer identification number, ISO 7812-1)\n";
- text += " Issuer identification number: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (issuer identification number, ISO 7812-1)\n")
+ text.append(" Issuer identification number: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
elif tag == 3:
- text += " (card service data byte)\n"
- cs = historical_bytes.pop(0)
- if cs == None:
- text += " Error in the ATR: expecting 1 byte and got 0"
+ text.append(" (card service data byte)\n")
+ try:
+ cs = historical_bytes[0]
+ except IndexError:
+ text.append("Error in the ATR: expecting 1 byte and got 0\n")
else:
- text += " Card service data byte: %d" % cs
- text += cs(cs)
+ if cs == None:
+ text.append(" Error in the ATR: expecting 1 byte and got 0")
+ else:
+ text.append(" Card service data byte: %d" % cs)
+ text.append(card_service(cs))
elif tag == 4:
- text += " (initial access data)\n"
- text += " Initial access data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (initial access data)\n")
+ text.append(" Initial access data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
elif tag == 5:
- text += " (card issuer's data)\n"
- text += " Card issuer data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (card issuer's data)\n")
+ text.append(" Card issuer data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
elif tag == 6:
- text += " (pre-issuing data)\n"
- text += " Data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (pre-issuing data)\n")
+ text.append(" Data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
elif tag == 7:
- text += " (card capabilities)\n"
+ text.append(" (card capabilities)\n")
if len == 1:
- sm = historical_bytes.pop(0)
- text += " Selection methods: %d" % sm
- text += sm(sm)
+ try:
+ sm = historical_bytes[0]
+ except:
+ text.append("Error in the ATR: expecting 1 byte and got 0\n")
+ else:
+ text.append(" Selection methods: %d" % sm)
+ text.append(selection_mode(sm))
elif len == 2:
- sm = historical_bytes.pop(0)
- dc = historical_bytes.pop(0)
- text += " Selection methods: %d" % sm
- text += sm(sm)
- text += " Data coding byte: %d" % dc
- text += dc(dc)
+ sm = historical_bytes[0]
+ dc = historical_bytes[1]
+ text.append(" Selection methods: %d" % sm)
+ text.append(selection_methods(sm))
+ text.append(" Data coding byte: %d" % dc)
+ text.append(data_coding(dc))
elif len == 3:
- sm = historical_bytes.pop(0)
- dc = historical_bytes.pop(0)
- cc = historical_bytes.pop(0)
- text += " Selection methods: %d" % sm
- text += sm(sm)
- text += " Data coding byte: %d" % dc
- text += dc(dc)
- text += " Command chaining, length fields and logical channels: %d" % cc
- text += cc(cc)
+ sm = historical_bytes[0]
+ dc = historical_bytes[1]
+ cc = historical_bytes[2]
+ text.append(" Selection methods: %d" % sm)
+ text.append(selection_mode(sm))
+ text.append(" Data coding byte: %d" % dc)
+ text.append(data_coding(dc))
+ text.append(" Command chaining, length fields and logical channels: %d" % cc)
+ text.append(command_chaining(cc))
else:
- text += " wrong ATR"
+ text.append(" wrong ATR")
elif tag == 8:
- text += " (status indicator)\n"
+ text.append(" (status indicator)\n")
if len == 1:
- lcs = historical_bytes.pop(0)
- text += " LCS (life card cycle): %d" % lcs
+ lcs = historical_bytes[0]
+ text.append(" LCS (life card cycle): %d" % lcs)
elif len == 2:
- sw1 = historical_bytes.pop(0)
- sw2 = historical_bytes.pop(0)
- text += " SW: %02X %02X" % (sw1, sw2)
+ sw1 = historical_bytes[0]
+ sw2 = historical_bytes[1]
+ text.append(" SW: %02X %02X" % (sw1, sw2))
elif len == 3:
- lcs = historical_bytes.pop(0)
- sw1 = historical_bytes.pop(0)
- sw2 = historical_bytes.pop(0)
- text += " LCS (life card cycle): %d" % lcs
- text += " SW: %02X %02X" % (sw1, sw2)
+ lcs = historical_bytes[0]
+ sw1 = historical_bytes[1]
+ sw2 = historical_bytes[2]
+ text.append(" LCS (life card cycle): %d" % lcs)
+ text.append(" SW: %02X %02X" % (sw1, sw2))
elif tag == 15:
- text += " (application identifier)\n"
- text += " Application identifier: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (application identifier)\n")
+ text.append(" Application identifier: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
else:
- text += " (unknown)\n"
- text += " Value: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX)
+ text.append(" (unknown)\n")
+ text.append(" Value: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
# consume len bytes of historic
- for i in range(len):
- historical_bytes.pop(0)
+ del historical_bytes[0:len]
- return text
+ return ''.join(text)
def analyse_histrorical_bytes(historical_bytes):
- text = ""
- hb_category = historical_bytes.pop(0)
+ text = []
# return if we have NO historical bytes
- if hb_category == None:
- return text
+ if len(historical_bytes) == 0:
+ return ""
+
+ hb_category = historical_bytes.pop(0)
- text += " Category indicator byte: 0x%02X" % hb_category
+ text.append(" Category indicator byte: 0x%02X" % hb_category)
if hb_category == 0x00:
- text += " (compact TLV data object)\n";
+ text.append(" (compact TLV data object)\n")
- if historical_bytes.length() < 3:
- text += " Error in the ATR: expecting 3 bytes and got %d" % historical_bytes.length()
- return text
+ if len(historical_bytes) < 3:
+ text.append(" Error in the ATR: expecting 3 bytes and got %d" % len(historical_bytes))
+ return ''.join(text)
# get the 3 last bytes
status = historical_bytes[-3:]
del historical_bytes[-3:]
while len(historical_bytes) > 0:
- text += compact_tlv(historical_bytes)
+ text.append(compact_tlv(historical_bytes))
(lcs, sw1, sw2) = status[:3]
- text += " Mandatory status indicator (3 last bytes)\n";
- text += " LCS (life card cycle): %d (%s)" % (lcs, lcs(lcs))
- text += " SW: %02X%02X (%s)" % (sw1, sw1, "") #Chipcard::PCSC::Card::ISO7816Error("$sw1 $sw2"))
+ text.append(" Mandatory status indicator (3 last bytes)\n")
+ text.append(" LCS (life card cycle): %d (%s)" % (lcs, life_cycle_status(lcs)))
+ text.append( " SW: %02X%02X (%s)" % (sw1, sw1, "")) #Chipcard::PCSC::Card::ISO7816Error("$sw1 $sw2"))
elif hb_category == 0x80:
- text += " (compact TLV data object)\n"
+ text.append(" (compact TLV data object)\n")
while len(historical_bytes) > 0:
- text += compact_tlv(historical_bytes)
+ text.append(compact_tlv(historical_bytes))
elif hb_category == 0x10:
- text += " (next byte is the DIR data reference)"
+ text.append(" (next byte is the DIR data reference)")
data_ref = historical_bytes.pop(0)
- text += " DIR data reference: %d", data_ref
+ text.append(" DIR data reference: %d" % data_ref)
elif hb_category in (0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8A, 0x8B, 0x8C, 0x8D, 0x8E, 0x8F):
- text += " (Reserved for future use)";
+ text.append(" (Reserved for future use)")
else:
- text += " (proprietary format)";
+ text.append(" (proprietary format)")
return text
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-07-05 19:14:41
|
Revision: 295
http://pyscard.svn.sourceforge.net/pyscard/?rev=295&view=rev
Author: ludov
Date: 2009-07-05 19:14:31 +0000 (Sun, 05 Jul 2009)
Log Message:
-----------
add color for text output
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-06-26 14:54:32 UTC (rev 294)
+++ trunk/contrib/parseATR/parseATR.py 2009-07-05 19:14:31 UTC (rev 295)
@@ -550,7 +550,7 @@
else:
text.append(" (proprietary format)")
- return text
+ return ''.join(text)
def compute_tck(atr):
# do not include TS byte
@@ -561,13 +561,25 @@
s ^= atr["atr"][-1];
return s
+def colorize_txt(l):
+ magenta = "\033[35m"
+ normal = "\033[0m"
+ text = l[0]
+ if len(l) > 1:
+ text += magenta + "".join(l[1:]) + normal
+ return text
+
def atr_display_txt(atr):
+ return atr_display(atr, colorize_txt)
+
+def atr_display(atr, colorize):
+ text = []
TS = {0x3B: "Direct Convention", 0x3F: "Inverse Convention"}
- print "TS = 0x%02X --> %s" % (atr["TS"], TS[atr["TS"]])
+ text.append(["TS = 0x%02X --> " % atr["TS"], TS[atr["TS"]]])
Y1 = atr["T0"] >> 4
K = atr["T0"] & 0xF
- print "T0 = 0x%02X, Y(1): b%s, K: %d (historical bytes)" % (atr["T0"], int2bin(Y1, padding = 4), K)
+ text.append(["T0 = 0x%02X --> " % atr["T0"], "Y(1): b%s, K: %d (historical bytes)" % (int2bin(Y1, padding = 4), K)])
for i in (1, 2, 3, 4):
separator = False
@@ -575,27 +587,31 @@
key = "T%s%d" % (p, i)
if (atr.has_key(key)):
v = atr[key]
- print " T%s(%d) = 0x%02X -->" % (p, i, v),
- print eval("%s(%d)" % (key, v))
+ t = [" T%s(%d) = 0x%02X --> " % (p, i, v)]
+ t.append(eval("%s(%d)" % (key, v)))
+ text.append(t)
separator = True
if separator:
- print "----"
+ text.append("----")
if (atr.has_key("hb")):
- print "Historical bytes: ",
- for b in atr["hb"]:
- print "0x%02X" % b,
- print
- print analyse_histrorical_bytes(atr["hb"])
+ t = ["Historical bytes: "]
+ t.append(smartcard.util.toHexString(atr["hb"], smartcard.util.HEX))
+ text.append(t)
+ text.append(analyse_histrorical_bytes(atr["hb"]))
+
if (atr.has_key("TCK")):
- print ("TCK = 0x%02X" % atr["TCK"]),
+ t = ["TCK = 0x%02X " % atr["TCK"]]
tck = compute_tck(atr)
if tck == atr["TCK"]:
- print "(correct checksum)"
+ t.append("(correct checksum)")
else:
- print "WRONG CHECKSUM, expected 0x%02X" % tck
+ t.append("WRONG CHECKSUM, expected 0x%02X" % tck)
+ text.append(t)
+ return "\n".join([colorize(t) for t in text])
+
if __name__ == "__main__":
import sys
if len(sys.argv) > 1:
@@ -605,4 +621,5 @@
ATR = "3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 36 4E"
atr = parseATR(ATR)
print "ATR:", ATR
- atr_display_txt(atr)
+ text = atr_display_txt(atr)
+ print text
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-07-29 21:21:58
|
Revision: 311
http://pyscard.svn.sourceforge.net/pyscard/?rev=311&view=rev
Author: ludov
Date: 2009-07-29 21:21:49 +0000 (Wed, 29 Jul 2009)
Log Message:
-----------
improve robustness
add html support
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-07-27 14:08:29 UTC (rev 310)
+++ trunk/contrib/parseATR/parseATR.py 2009-07-29 21:21:49 UTC (rev 311)
@@ -24,6 +24,10 @@
ATR_MAX_PROTOCOLS = 7
T = -1
+class ParseAtrException(Exception):
+ """Base class for exceptions in this module."""
+ pass
+
def normalize(atr):
""" transform an ATR in list of integers
valid input formats are
@@ -95,7 +99,12 @@
atr["hb"] = atr_txt[pointer+1:pointer+1+hb_length]
if len(atr["hb"]) < hb_length:
- raise Exception("ERROR! ATR is truncated: %d byte(s) is/are missing" % (hb_length-len(atr["hb"])))
+ missing = hb_length-len(atr["hb"])
+ if missing > 1:
+ (t1, t2) = ("s", "are")
+ else:
+ (t1, t2) = ("", "is")
+ raise ParseAtrException("ERROR! ATR is truncated: %d byte%s %s missing" % (missing, t1, t2))
# Store TCK
if (atr.has_key("TCK")):
@@ -106,10 +115,11 @@
def TA1(v):
Fi = (372, 372, 558, 744, 1116, 1488, 1860, "RFU", "RFU", 512, 768, 1024, 1536, 2048, "RFU", "RFU")
Di = ("RFU", 1, 2, 4, 8, 16, 32, "RFU", 12, 20, "RFU", "RFU", "RFU", "RFU", "RFU", "RFU")
+ FMax = (4, 5, 6, 8, 12, 16, 20, "RFU", "RFU", 5, 7.5, 10, 15, 20, "RFU", "RFU")
F = v >> 4
D = v & 0xF
value = Fi[F]/Di[D]
- return "Fi=%s, Di=%s, %g cycles/ETU (%d bits/s at 3.57 MHz)" % (Fi[F], Di[D], value, 3571200/value)
+ return "Fi=%s, Di=%s, %g cycles/ETU (%d bits/s at 4.00 MHz, %d bits/s for fMax=%d MHz)" % (Fi[F], Di[D], value, 4000000/value, FMax[F]*1000000/value, FMax[F])
def TA2(v):
F = v >> 4
@@ -572,6 +582,32 @@
def atr_display_txt(atr):
return atr_display(atr, colorize_txt)
+html_escape_table = {
+ "&": "&",
+ '"': """,
+ "'": "'",
+ ">": ">",
+ "<": "<",
+ }
+
+def html_escape(text):
+ """Produce entities within text."""
+ L=[]
+ for c in text:
+ L.append(html_escape_table.get(c,c))
+ return "".join(L)
+
+def colorize_html(l):
+ text = '<span class="left">' + html_escape(l[0]) + '</span>'
+ if len(l) > 1:
+ text += '<span class="right">' + html_escape("".join(l[1:])) + '</span>'
+ else:
+ text = l[0]
+ return text
+
+def atr_display_html(atr):
+ return atr_display(atr, colorize_html)
+
def atr_display(atr, colorize):
text = []
TS = {0x3B: "Direct Convention", 0x3F: "Inverse Convention"}
@@ -599,7 +635,9 @@
t.append(smartcard.util.toHexString(atr["hb"], smartcard.util.HEX))
text.append(t)
- text.append(analyse_histrorical_bytes(atr["hb"]))
+ t = analyse_histrorical_bytes(atr["hb"])
+ if t:
+ text.append(t)
if (atr.has_key("TCK")):
t = ["TCK = 0x%02X " % atr["TCK"]]
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-04 10:55:05
|
Revision: 314
http://pyscard.svn.sourceforge.net/pyscard/?rev=314&view=rev
Author: ludov
Date: 2009-10-04 10:54:44 +0000 (Sun, 04 Oct 2009)
Log Message:
-----------
move the " --> " in colorize_txt() since it is for text output only
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-04 09:07:37 UTC (rev 313)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-04 10:54:44 UTC (rev 314)
@@ -576,7 +576,7 @@
normal = "\033[0m"
text = l[0]
if len(l) > 1:
- text += magenta + "".join(l[1:]) + normal
+ text += " --> " + magenta + "".join(l[1:]) + normal
return text
def atr_display_txt(atr):
@@ -611,11 +611,11 @@
def atr_display(atr, colorize):
text = []
TS = {0x3B: "Direct Convention", 0x3F: "Inverse Convention"}
- text.append(["TS = 0x%02X --> " % atr["TS"], TS[atr["TS"]]])
+ text.append(["TS = 0x%02X" % atr["TS"], TS[atr["TS"]]])
Y1 = atr["T0"] >> 4
K = atr["T0"] & 0xF
- text.append(["T0 = 0x%02X --> " % atr["T0"], "Y(1): b%s, K: %d (historical bytes)" % (int2bin(Y1, padding = 4), K)])
+ text.append(["T0 = 0x%02X" % atr["T0"], "Y(1): b%s, K: %d (historical bytes)" % (int2bin(Y1, padding = 4), K)])
for i in (1, 2, 3, 4):
separator = False
@@ -623,12 +623,12 @@
key = "T%s%d" % (p, i)
if (atr.has_key(key)):
v = atr[key]
- t = [" T%s(%d) = 0x%02X --> " % (p, i, v)]
+ t = [" T%s(%d) = 0x%02X" % (p, i, v)]
t.append(eval("%s(%d)" % (key, v)))
text.append(t)
separator = True
if separator:
- text.append("----")
+ text.append(["----"])
if (atr.has_key("hb")):
t = ["Historical bytes: "]
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-04 11:17:13
|
Revision: 316
http://pyscard.svn.sourceforge.net/pyscard/?rev=316&view=rev
Author: ludov
Date: 2009-10-04 11:17:03 +0000 (Sun, 04 Oct 2009)
Log Message:
-----------
use a locally defined toHexString()
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-04 10:56:32 UTC (rev 315)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-04 11:17:03 UTC (rev 316)
@@ -18,8 +18,6 @@
51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
"""
-import smartcard.util
-
ATR_PROTOCOL_TYPE_T0 = 0
ATR_MAX_PROTOCOLS = 7
T = -1
@@ -28,6 +26,10 @@
"""Base class for exceptions in this module."""
pass
+def toHexString(bytes=[]):
+ """ return a hex list """
+ return " ".join(["%02X" % b for b in bytes])
+
def normalize(atr):
""" transform an ATR in list of integers
valid input formats are
@@ -424,11 +426,11 @@
if tag == 1:
text.append(" (country code, ISO 3166-1)\n")
- text.append(" Country code: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Country code: " + toHexString(historical_bytes[:len]))
elif tag == 2:
text.append(" (issuer identification number, ISO 7812-1)\n")
- text.append(" Issuer identification number: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Issuer identification number: " + toHexString(historical_bytes[:len]))
elif tag == 3:
text.append(" (card service data byte)\n")
@@ -445,15 +447,15 @@
elif tag == 4:
text.append(" (initial access data)\n")
- text.append(" Initial access data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Initial access data: " + toHexString(historical_bytes[:len]))
elif tag == 5:
text.append(" (card issuer's data)\n")
- text.append(" Card issuer data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Card issuer data: " + toHexString(historical_bytes[:len]))
elif tag == 6:
text.append(" (pre-issuing data)\n")
- text.append(" Data: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Data: " + toHexString(historical_bytes[:len]))
elif tag == 7:
text.append(" (card capabilities)\n")
@@ -503,11 +505,11 @@
elif tag == 15:
text.append(" (application identifier)\n")
- text.append(" Application identifier: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Application identifier: " + toHexString(historical_bytes[:len]))
else:
text.append(" (unknown)\n")
- text.append(" Value: " + smartcard.util.toHexString(historical_bytes[:len], smartcard.util.HEX))
+ text.append(" Value: " + toHexString(historical_bytes[:len]))
# consume len bytes of historic
del historical_bytes[0:len]
@@ -632,7 +634,7 @@
if (atr.has_key("hb")):
t = ["Historical bytes: "]
- t.append(smartcard.util.toHexString(atr["hb"], smartcard.util.HEX))
+ t.append(toHexString(atr["hb"]))
text.append(t)
t = analyse_histrorical_bytes(atr["hb"])
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-04 13:26:39
|
Revision: 317
http://pyscard.svn.sourceforge.net/pyscard/?rev=317&view=rev
Author: ludov
Date: 2009-10-04 13:26:23 +0000 (Sun, 04 Oct 2009)
Log Message:
-----------
try to find card description for a given ATR
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-04 11:17:03 UTC (rev 316)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-04 13:26:23 UTC (rev 317)
@@ -652,6 +652,25 @@
return "\n".join([colorize(t) for t in text])
+def match_atr(atr):
+ """ try to find card description for a given ATR """
+ card = []
+ file = open("smartcard_list.txt")
+ for line in file:
+ if line.startswith("#"):
+ continue
+ line = line.rstrip("\n")
+
+ if line == atr:
+ # found the ATR
+ for desc in file:
+ if desc == "\n":
+ break;
+ # get all the possible card descriptions
+ card.append(desc.strip())
+ file.close()
+ return card
+
if __name__ == "__main__":
import sys
if len(sys.argv) > 1:
@@ -663,3 +682,9 @@
print "ATR:", ATR
text = atr_display_txt(atr)
print text
+
+ card = match_atr(ATR)
+ if card:
+ print "\nPossibly identified card:", " ".join(card)
+ else:
+ print "\nUnknown card"
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-04 14:19:31
|
Revision: 318
http://pyscard.svn.sourceforge.net/pyscard/?rev=318&view=rev
Author: ludov
Date: 2009-10-04 14:19:19 +0000 (Sun, 04 Oct 2009)
Log Message:
-----------
normalize ATR before matching
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-04 13:26:23 UTC (rev 317)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-04 14:19:19 UTC (rev 318)
@@ -655,6 +655,7 @@
def match_atr(atr):
""" try to find card description for a given ATR """
card = []
+ atr = toHexString(normalize(atr))
file = open("smartcard_list.txt")
for line in file:
if line.startswith("#"):
@@ -679,7 +680,7 @@
#ATR = "3B A7 00 40 18 80 65 A2 08 01 01 52"
ATR = "3F FF 95 00 FF 91 81 71 A0 47 00 44 4E 41 53 50 30 31 31 20 52 65 76 42 30 36 4E"
atr = parseATR(ATR)
- print "ATR:", ATR
+ print "ATR:", toHexString(normalize(ATR))
text = atr_display_txt(atr)
print text
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-04 14:59:12
|
Revision: 319
http://pyscard.svn.sourceforge.net/pyscard/?rev=319&view=rev
Author: ludov
Date: 2009-10-04 14:59:00 +0000 (Sun, 04 Oct 2009)
Log Message:
-----------
ParseAtrException is a subclass of exceptions.Exception
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-04 14:19:19 UTC (rev 318)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-04 14:59:00 UTC (rev 319)
@@ -22,10 +22,15 @@
ATR_MAX_PROTOCOLS = 7
T = -1
-class ParseAtrException(Exception):
+import exceptions
+class ParseAtrException(exceptions.Exception):
"""Base class for exceptions in this module."""
- pass
+ def __init__(self, text):
+ self.text = text
+ def __str__(self):
+ return self.text
+
def toHexString(bytes=[]):
""" return a hex list """
return " ".join(["%02X" % b for b in bytes])
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-21 15:39:47
|
Revision: 320
http://pyscard.svn.sourceforge.net/pyscard/?rev=320&view=rev
Author: ludov
Date: 2009-10-21 15:39:38 +0000 (Wed, 21 Oct 2009)
Log Message:
-----------
improve formating
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-04 14:59:00 UTC (rev 319)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-21 15:39:38 UTC (rev 320)
@@ -460,7 +460,7 @@
elif tag == 6:
text.append(" (pre-issuing data)\n")
- text.append(" Data: " + toHexString(historical_bytes[:len]))
+ text.append(" Data: " + toHexString(historical_bytes[:len]) + "\n")
elif tag == 7:
text.append(" (card capabilities)\n")
@@ -470,24 +470,24 @@
except:
text.append("Error in the ATR: expecting 1 byte and got 0\n")
else:
- text.append(" Selection methods: %d" % sm)
+ text.append(" Selection methods: %d\n" % sm)
text.append(selection_mode(sm))
elif len == 2:
sm = historical_bytes[0]
dc = historical_bytes[1]
- text.append(" Selection methods: %d" % sm)
+ text.append(" Selection methods: %d\n" % sm)
text.append(selection_methods(sm))
- text.append(" Data coding byte: %d" % dc)
+ text.append(" Data coding byte: %d\n" % dc)
text.append(data_coding(dc))
elif len == 3:
sm = historical_bytes[0]
dc = historical_bytes[1]
cc = historical_bytes[2]
- text.append(" Selection methods: %d" % sm)
+ text.append(" Selection methods: %d\n" % sm)
text.append(selection_mode(sm))
- text.append(" Data coding byte: %d" % dc)
+ text.append(" Data coding byte: %d\n" % dc)
text.append(data_coding(dc))
- text.append(" Command chaining, length fields and logical channels: %d" % cc)
+ text.append(" Command chaining, length fields and logical channels: %d\n" % cc)
text.append(command_chaining(cc))
else:
text.append(" wrong ATR")
@@ -567,7 +567,7 @@
else:
text.append(" (proprietary format)")
- return ''.join(text)
+ return text
def compute_tck(atr):
# do not include TS byte
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-10-21 15:53:19
|
Revision: 322
http://pyscard.svn.sourceforge.net/pyscard/?rev=322&view=rev
Author: ludov
Date: 2009-10-21 15:53:13 +0000 (Wed, 21 Oct 2009)
Log Message:
-----------
remove extra ": "
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-21 15:50:17 UTC (rev 321)
+++ trunk/contrib/parseATR/parseATR.py 2009-10-21 15:53:13 UTC (rev 322)
@@ -638,7 +638,7 @@
text.append(["----"])
if (atr.has_key("hb")):
- t = ["Historical bytes: "]
+ t = ["Historical bytes"]
t.append(toHexString(atr["hb"]))
text.append(t)
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-12 12:32:44
|
Revision: 323
http://pyscard.svn.sourceforge.net/pyscard/?rev=323&view=rev
Author: ludov
Date: 2009-11-12 12:32:36 +0000 (Thu, 12 Nov 2009)
Log Message:
-----------
use sw2 instead of sw1 when needed (typo)
Thanks to Alexei Bouznik for the bug report
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-10-21 15:53:13 UTC (rev 322)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-12 12:32:36 UTC (rev 323)
@@ -549,7 +549,7 @@
(lcs, sw1, sw2) = status[:3]
text.append(" Mandatory status indicator (3 last bytes)\n")
text.append(" LCS (life card cycle): %d (%s)" % (lcs, life_cycle_status(lcs)))
- text.append( " SW: %02X%02X (%s)" % (sw1, sw1, "")) #Chipcard::PCSC::Card::ISO7816Error("$sw1 $sw2"))
+ text.append( " SW: %02X%02X (%s)" % (sw1, sw2, "")) #Chipcard::PCSC::Card::ISO7816Error("$sw1 $sw2"))
elif hb_category == 0x80:
text.append(" (compact TLV data object)\n")
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-12 12:34:50
|
Revision: 324
http://pyscard.svn.sourceforge.net/pyscard/?rev=324&view=rev
Author: ludov
Date: 2009-11-12 12:34:38 +0000 (Thu, 12 Nov 2009)
Log Message:
-----------
output reformat
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-12 12:32:36 UTC (rev 323)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-12 12:34:38 UTC (rev 324)
@@ -691,6 +691,6 @@
card = match_atr(ATR)
if card:
- print "\nPossibly identified card:", " ".join(card)
+ print "Possibly identified card:", " ".join(card)
else:
- print "\nUnknown card"
+ print "Unknown card"
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-13 19:54:06
|
Revision: 325
http://pyscard.svn.sourceforge.net/pyscard/?rev=325&view=rev
Author: ludov
Date: 2009-11-13 19:53:58 +0000 (Fri, 13 Nov 2009)
Log Message:
-----------
normalize'): allow more than one space character between hex digits
Thanks to Alexei Bouznik for the patch
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-12 12:34:38 UTC (rev 324)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-13 19:53:58 UTC (rev 325)
@@ -41,9 +41,17 @@
"3B A7 00 40 18 80 65 A2 08 01 01 52"
"3B:A7:00:40:18:80:65:A2:08:01:01:52"
"""
- atr = atr.replace(":", " ")
- atr = atr.split(" ")
- atr = map(lambda x: int(x,16), atr)
+ atr = atr.replace(":", "")
+ atr = atr.replace(" ", "")
+
+ res = []
+ while len(atr) >= 2:
+ byte, atr = atr[:2], atr[2:]
+ res.append(byte)
+ if len(atr) > 0:
+ raise ParseAtrException('warning: odd string, remainder: %r' % atr)
+
+ atr = map(lambda x: int(x,16), res)
return atr
def int2bin(i, padding = 8):
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-13 19:56:22
|
Revision: 326
http://pyscard.svn.sourceforge.net/pyscard/?rev=326&view=rev
Author: ludov
Date: 2009-11-13 19:56:15 +0000 (Fri, 13 Nov 2009)
Log Message:
-----------
add missing formatting \n
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-13 19:53:58 UTC (rev 325)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-13 19:56:15 UTC (rev 326)
@@ -455,16 +455,16 @@
if cs == None:
text.append(" Error in the ATR: expecting 1 byte and got 0")
else:
- text.append(" Card service data byte: %d" % cs)
+ text.append(" Card service data byte: %d\n" % cs)
text.append(card_service(cs))
elif tag == 4:
text.append(" (initial access data)\n")
- text.append(" Initial access data: " + toHexString(historical_bytes[:len]))
+ text.append(" Initial access data: " + toHexString(historical_bytes[:len]) + "\n")
elif tag == 5:
text.append(" (card issuer's data)\n")
- text.append(" Card issuer data: " + toHexString(historical_bytes[:len]))
+ text.append(" Card issuer data: " + toHexString(historical_bytes[:len]) + "\n")
elif tag == 6:
text.append(" (pre-issuing data)\n")
@@ -513,7 +513,7 @@
lcs = historical_bytes[0]
sw1 = historical_bytes[1]
sw2 = historical_bytes[2]
- text.append(" LCS (life card cycle): %d" % lcs)
+ text.append(" LCS (life card cycle): %d\n" % lcs)
text.append(" SW: %02X %02X" % (sw1, sw2))
elif tag == 15:
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-22 14:15:22
|
Revision: 330
http://pyscard.svn.sourceforge.net/pyscard/?rev=330&view=rev
Author: ludov
Date: 2009-11-22 14:15:15 +0000 (Sun, 22 Nov 2009)
Log Message:
-----------
match_atr(): accept an atr_file argument. Default value is
"smartcard_list.txt"
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-16 10:51:53 UTC (rev 329)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-22 14:15:15 UTC (rev 330)
@@ -669,11 +669,11 @@
return "\n".join([colorize(t) for t in text])
-def match_atr(atr):
+def match_atr(atr, atr_file = "smartcard_list.txt"):
""" try to find card description for a given ATR """
card = []
atr = toHexString(normalize(atr))
- file = open("smartcard_list.txt")
+ file = open(atr_file)
for line in file:
if line.startswith("#"):
continue
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-22 14:16:48
|
Revision: 331
http://pyscard.svn.sourceforge.net/pyscard/?rev=331&view=rev
Author: ludov
Date: 2009-11-22 14:16:37 +0000 (Sun, 22 Nov 2009)
Log Message:
-----------
catch an explicite IndexError exception instead of all
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-22 14:15:15 UTC (rev 330)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-22 14:16:37 UTC (rev 331)
@@ -479,7 +479,7 @@
if len == 1:
try:
sm = historical_bytes[0]
- except:
+ except IndexError:
text.append("Error in the ATR: expecting 1 byte and got 0\n")
else:
text.append(" Selection methods: %d\n" % sm)
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-22 14:25:30
|
Revision: 332
http://pyscard.svn.sourceforge.net/pyscard/?rev=332&view=rev
Author: ludov
Date: 2009-11-22 14:25:23 +0000 (Sun, 22 Nov 2009)
Log Message:
-----------
parseATR.py:672:30: E251 no spaces around keyword / parameter equals
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-22 14:16:37 UTC (rev 331)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-22 14:25:23 UTC (rev 332)
@@ -669,7 +669,7 @@
return "\n".join([colorize(t) for t in text])
-def match_atr(atr, atr_file = "smartcard_list.txt"):
+def match_atr(atr, atr_file="smartcard_list.txt"):
""" try to find card description for a given ATR """
card = []
atr = toHexString(normalize(atr))
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-28 15:26:29
|
Revision: 360
http://pyscard.svn.sourceforge.net/pyscard/?rev=360&view=rev
Author: ludov
Date: 2009-11-28 15:26:22 +0000 (Sat, 28 Nov 2009)
Log Message:
-----------
correctly handle invalid TS byte
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-24 08:32:59 UTC (rev 359)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-28 15:26:22 UTC (rev 360)
@@ -630,7 +630,7 @@
def atr_display(atr, colorize):
text = []
TS = {0x3B: "Direct Convention", 0x3F: "Inverse Convention"}
- text.append(["TS = 0x%02X" % atr["TS"], TS[atr["TS"]]])
+ text.append(["TS = 0x%02X" % atr["TS"], TS.get(atr["TS"], "Invalid")])
Y1 = atr["T0"] >> 4
K = atr["T0"] & 0xF
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-28 15:38:25
|
Revision: 361
http://pyscard.svn.sourceforge.net/pyscard/?rev=361&view=rev
Author: ludov
Date: 2009-11-28 15:38:19 +0000 (Sat, 28 Nov 2009)
Log Message:
-----------
reformat comment
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-28 15:26:22 UTC (rev 360)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-28 15:38:19 UTC (rev 361)
@@ -26,7 +26,7 @@
class ParseAtrException(exceptions.Exception):
- """Base class for exceptions in this module."""
+ """ Base class for exceptions in this module """
def __init__(self, text):
self.text = text
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-11-28 16:08:09
|
Revision: 362
http://pyscard.svn.sourceforge.net/pyscard/?rev=362&view=rev
Author: ludov
Date: 2009-11-28 16:08:02 +0000 (Sat, 28 Nov 2009)
Log Message:
-----------
correctly handle invalid TA1 byte
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-28 15:38:19 UTC (rev 361)
+++ trunk/contrib/parseATR/parseATR.py 2009-11-28 16:08:02 UTC (rev 362)
@@ -137,9 +137,16 @@
FMax = (4, 5, 6, 8, 12, 16, 20, "RFU", "RFU", 5, 7.5, 10, 15, 20, "RFU", "RFU")
F = v >> 4
D = v & 0xF
- value = Fi[F] / Di[D]
- return "Fi=%s, Di=%s, %g cycles/ETU (%d bits/s at 4.00 MHz, %d bits/s for fMax=%d MHz)" % (Fi[F], Di[D], value, 4000000 / value, FMax[F] * 1000000 / value, FMax[F])
+ text = "Fi=%s, Di=%s" % (Fi[F], Di[D])
+ if "RFU" in [Fi[F], Di[D]]:
+ text += ", INVALID VALUE"
+ else:
+ value = Fi[F] / Di[D]
+ text += ", %g cycles/ETU (%d bits/s at 4.00 MHz, %d bits/s for fMax=%d MHz)" % (value, 4000000 / value, FMax[F] * 1000000 / value, FMax[F])
+
+ return text
+
def TA2(v):
F = v >> 4
D = v & 0xF
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
|
From: <lu...@us...> - 2009-12-06 11:14:23
|
Revision: 363
http://pyscard.svn.sourceforge.net/pyscard/?rev=363&view=rev
Author: ludov
Date: 2009-12-06 11:14:15 +0000 (Sun, 06 Dec 2009)
Log Message:
-----------
add a default return value for life_cycle_status()
Modified Paths:
--------------
trunk/contrib/parseATR/parseATR.py
Modified: trunk/contrib/parseATR/parseATR.py
===================================================================
--- trunk/contrib/parseATR/parseATR.py 2009-11-28 16:08:02 UTC (rev 362)
+++ trunk/contrib/parseATR/parseATR.py 2009-12-06 11:14:15 UTC (rev 363)
@@ -274,6 +274,8 @@
def life_cycle_status(lcs):
# Table 13 - Life cycle status byte
# ISO 7816-4:2004, page 21
+ text = "Unknown"
+
if lcs > 15:
text = "Proprietary"
This was sent by the SourceForge.net collaborative development platform, the world's largest Open Source development site.
|
×
Want the latest updates on software, tech news, and AI?
Get latest updates about software, tech news, and AI from SourceForge directly in your inbox once a month.
Thanks for helping keep SourceForge clean.
X