Thread: [PyOpenGL-Devel] [ pyopengl-Bugs-629236 ] source install failed on RH8.0
Brought to you by:
mcfletch
Menu
▾
▴
pyopengl-devel
|
From: <no...@so...> - 2002-10-26 20:50:54
|
Bugs item #629236, was opened at 2002-10-26 13:50 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 Category: install Group: v2.0 Status: Open Resolution: None Priority: 5 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: source install failed on RH8.0 Initial Comment: Tried to install PyOpenGL-2.0.0.44-1.src.rpm on Redhat 8.0 with: rpm --install /gslice/rpms/PyOpenGL-2.0.0.44-1.src.rpm I get the following error: error: cannot create %sourcedir /usr/src/redhat/SOURCES There's no directory /usr/src/redhat on my Redhat 8.0 machine... ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 |
|
From: <no...@so...> - 2002-10-26 23:44:49
|
Bugs item #629236, was opened at 2002-10-26 16:50 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 Category: install Group: v2.0 Status: Open Resolution: None >Priority: 7 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: source install failed on RH8.0 Initial Comment: Tried to install PyOpenGL-2.0.0.44-1.src.rpm on Redhat 8.0 with: rpm --install /gslice/rpms/PyOpenGL-2.0.0.44-1.src.rpm I get the following error: error: cannot create %sourcedir /usr/src/redhat/SOURCES There's no directory /usr/src/redhat on my Redhat 8.0 machine... ---------------------------------------------------------------------- >Comment By: Mike C. Fletcher (mcfletch) Date: 2002-10-26 19:44 Message: Logged In: YES user_id=34901 I'm a little out of my depth here (never used RPM for packaging). I'd guess this would be easily fixed merely by re-building the RPM under redhat 8.0, but as I say, I'm not sure. I've bumped the priority up a notch as RH 8.0 is likely to be a fairly significant target for users. (user (if you happen to read this), you might find it easiest to unpack the source tarball and try running "setup.py install" I'd guess the linux .config file will still work for RH 8.0, so it should be able to install from that). ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 |
|
From: SourceForge.net <no...@so...> - 2003-03-24 20:49:48
|
Bugs item #629236, was opened at 2002-10-26 16:50 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 Category: install Group: v2.0 Status: Open Resolution: None Priority: 7 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: source install failed on RH8.0 Initial Comment: Tried to install PyOpenGL-2.0.0.44-1.src.rpm on Redhat 8.0 with: rpm --install /gslice/rpms/PyOpenGL-2.0.0.44-1.src.rpm I get the following error: error: cannot create %sourcedir /usr/src/redhat/SOURCES There's no directory /usr/src/redhat on my Redhat 8.0 machine... ---------------------------------------------------------------------- Comment By: Shandy Brown (sjbrown) Date: 2003-03-24 16:02 Message: Logged In: YES user_id=183295 are you doing this as root? I thought the correct way to do an .src.rpm was to do rpmbuild --rebuild foo.src.rpm ---------------------------------------------------------------------- Comment By: Mike C. Fletcher (mcfletch) Date: 2002-10-26 19:44 Message: Logged In: YES user_id=34901 I'm a little out of my depth here (never used RPM for packaging). I'd guess this would be easily fixed merely by re-building the RPM under redhat 8.0, but as I say, I'm not sure. I've bumped the priority up a notch as RH 8.0 is likely to be a fairly significant target for users. (user (if you happen to read this), you might find it easiest to unpack the source tarball and try running "setup.py install" I'd guess the linux .config file will still work for RH 8.0, so it should be able to install from that). ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 |
|
From: SourceForge.net <no...@so...> - 2003-03-27 15:49:48
|
Bugs item #629236, was opened at 2002-10-26 13:50 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 Category: install Group: v2.0 Status: Open Resolution: None Priority: 7 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: source install failed on RH8.0 Initial Comment: Tried to install PyOpenGL-2.0.0.44-1.src.rpm on Redhat 8.0 with: rpm --install /gslice/rpms/PyOpenGL-2.0.0.44-1.src.rpm I get the following error: error: cannot create %sourcedir /usr/src/redhat/SOURCES There's no directory /usr/src/redhat on my Redhat 8.0 machine... ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2003-03-27 08:03 Message: Logged In: NO Also the lastest tarball, and the tip of the trunk on cvs at time of writing don't build on RH8 (well on my RH8 box anyway). I can provide the output from configure and make if anyone wants? ---------------------------------------------------------------------- Comment By: Shandy Brown (sjbrown) Date: 2003-03-24 13:02 Message: Logged In: YES user_id=183295 are you doing this as root? I thought the correct way to do an .src.rpm was to do rpmbuild --rebuild foo.src.rpm ---------------------------------------------------------------------- Comment By: Mike C. Fletcher (mcfletch) Date: 2002-10-26 16:44 Message: Logged In: YES user_id=34901 I'm a little out of my depth here (never used RPM for packaging). I'd guess this would be easily fixed merely by re-building the RPM under redhat 8.0, but as I say, I'm not sure. I've bumped the priority up a notch as RH 8.0 is likely to be a fairly significant target for users. (user (if you happen to read this), you might find it easiest to unpack the source tarball and try running "setup.py install" I'd guess the linux .config file will still work for RH 8.0, so it should be able to install from that). ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 |
|
From: SourceForge.net <no...@so...> - 2003-03-27 15:51:42
|
Bugs item #629236, was opened at 2002-10-26 13:50 You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 Category: install Group: v2.0 Status: Open Resolution: None Priority: 7 Submitted By: Nobody/Anonymous (nobody) Assigned to: Nobody/Anonymous (nobody) Summary: source install failed on RH8.0 Initial Comment: Tried to install PyOpenGL-2.0.0.44-1.src.rpm on Redhat 8.0 with: rpm --install /gslice/rpms/PyOpenGL-2.0.0.44-1.src.rpm I get the following error: error: cannot create %sourcedir /usr/src/redhat/SOURCES There's no directory /usr/src/redhat on my Redhat 8.0 machine... ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2003-03-27 08:05 Message: Logged In: NO err - I guess I should say "setup.py install" rather than "configure and make" ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2003-03-27 08:03 Message: Logged In: NO Also the lastest tarball, and the tip of the trunk on cvs at time of writing don't build on RH8 (well on my RH8 box anyway). I can provide the output from configure and make if anyone wants? ---------------------------------------------------------------------- Comment By: Shandy Brown (sjbrown) Date: 2003-03-24 13:02 Message: Logged In: YES user_id=183295 are you doing this as root? I thought the correct way to do an .src.rpm was to do rpmbuild --rebuild foo.src.rpm ---------------------------------------------------------------------- Comment By: Mike C. Fletcher (mcfletch) Date: 2002-10-26 16:44 Message: Logged In: YES user_id=34901 I'm a little out of my depth here (never used RPM for packaging). I'd guess this would be easily fixed merely by re-building the RPM under redhat 8.0, but as I say, I'm not sure. I've bumped the priority up a notch as RH 8.0 is likely to be a fairly significant target for users. (user (if you happen to read this), you might find it easiest to unpack the source tarball and try running "setup.py install" I'd guess the linux .config file will still work for RH 8.0, so it should be able to install from that). ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 |
|
From: SourceForge.net <no...@so...> - 2003-05-10 18:03:54
|
Bugs item #629236, was opened at 2002-10-26 16:50 Message generated for change (Comment added) made by mcfletch You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 Category: install Group: v2.0 >Status: Pending >Resolution: Fixed Priority: 7 Submitted By: Nobody/Anonymous (nobody) >Assigned to: Mike C. Fletcher (mcfletch) Summary: source install failed on RH8.0 Initial Comment: Tried to install PyOpenGL-2.0.0.44-1.src.rpm on Redhat 8.0 with: rpm --install /gslice/rpms/PyOpenGL-2.0.0.44-1.src.rpm I get the following error: error: cannot create %sourcedir /usr/src/redhat/SOURCES There's no directory /usr/src/redhat on my Redhat 8.0 machine... ---------------------------------------------------------------------- >Comment By: Mike C. Fletcher (mcfletch) Date: 2003-05-10 14:03 Message: Logged In: YES user_id=34901 The 2.0.1.04 release appears to build properly on Red Hat 8.0 from CVS or the source distribution. If I don't hear differently, I will consider this a fixed bug, marking it pending for now. Note that I haven't actually tried the source RPM, but the binary RPM does appear to properly install (given root privileges, of course). ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2003-03-27 11:05 Message: Logged In: NO err - I guess I should say "setup.py install" rather than "configure and make" ---------------------------------------------------------------------- Comment By: Nobody/Anonymous (nobody) Date: 2003-03-27 11:03 Message: Logged In: NO Also the lastest tarball, and the tip of the trunk on cvs at time of writing don't build on RH8 (well on my RH8 box anyway). I can provide the output from configure and make if anyone wants? ---------------------------------------------------------------------- Comment By: Shandy Brown (sjbrown) Date: 2003-03-24 16:02 Message: Logged In: YES user_id=183295 are you doing this as root? I thought the correct way to do an .src.rpm was to do rpmbuild --rebuild foo.src.rpm ---------------------------------------------------------------------- Comment By: Mike C. Fletcher (mcfletch) Date: 2002-10-26 19:44 Message: Logged In: YES user_id=34901 I'm a little out of my depth here (never used RPM for packaging). I'd guess this would be easily fixed merely by re-building the RPM under redhat 8.0, but as I say, I'm not sure. I've bumped the priority up a notch as RH 8.0 is likely to be a fairly significant target for users. (user (if you happen to read this), you might find it easiest to unpack the source tarball and try running "setup.py install" I'd guess the linux .config file will still work for RH 8.0, so it should be able to install from that). ---------------------------------------------------------------------- You can respond by visiting: https://sourceforge.net/tracker/?func=detail&atid=105988&aid=629236&group_id=5988 |
Thanks for helping keep SourceForge clean.
X