## Re: [PyMOL] Ditance between the stereo images

 Re: [PyMOL] Ditance between the stereo images From: Savvas Savvides - 2007-09-22 19:11:00 ```Hi Jhon, you are better off if you render/write-out the left/right images separately. A six degree difference gives a rather nice depth in your figure. ray angle=3 png left-image.png ray angle=-3 png right-image.png You can then bring them together at 6.7 cm or even better 5.8 cm from each other. Good luck Savvas Quoting Jhon Thomas : > Hi all > I want to create a stereo image. I think the distance between the two stereo > images shouls be > around 6-7 cm. but, as i make cartoon stereo diagram with pymol.In order to > focus properly on > the residue which i want to illustate. I get the distance around 14-15cm > through pymol. > Kindly, can anyone help me on this problem. > Thanking you > > With best regards > Jhon > ```

 [PyMOL] Ditance between the stereo images From: Jhon Thomas - 2007-09-22 18:58:25 Attachments: Message as HTML ```Hi all I want to create a stereo image. I think the distance between the two stereo images shouls be around 6-7 cm. but, as i make cartoon stereo diagram with pymol.In order to focus properly on the residue which i want to illustate. I get the distance around 14-15cm through pymol. Kindly, can anyone help me on this problem. Thanking you With best regards Jhon ```
 Re: [PyMOL] Ditance between the stereo images From: Savvas Savvides - 2007-09-22 19:11:00 ```Hi Jhon, you are better off if you render/write-out the left/right images separately. A six degree difference gives a rather nice depth in your figure. ray angle=3 png left-image.png ray angle=-3 png right-image.png You can then bring them together at 6.7 cm or even better 5.8 cm from each other. Good luck Savvas Quoting Jhon Thomas : > Hi all > I want to create a stereo image. I think the distance between the two stereo > images shouls be > around 6-7 cm. but, as i make cartoon stereo diagram with pymol.In order to > focus properly on > the residue which i want to illustate. I get the distance around 14-15cm > through pymol. > Kindly, can anyone help me on this problem. > Thanking you > > With best regards > Jhon > ```
 [PyMOL] COVER image From: Vincent Chaptal - 2007-11-20 20:34:11 ```Hello, I am trying to make a picture for a cover and I am wondering how to make a vertical image. (Pymol creates horizontal images, and journal covers are vertical) Is there a way to creates those vertical images other than turning the image 90 degrees with the 'turn z, 90' command? thanks vincent ---------------------------------------------------------- IMPORTANT WARNING: This email (and any attachments) is only intended for the use of the person or entity to which it is addressed, and may contain information that is privileged and confidential. You, the recipient, are obligated to maintain it in a safe, secure and confidential manner. Unauthorized redisclosure or failure to maintain confidentiality may subject you to federal and state penalties. If you are not the recipient, please immediately notify us by return email, and delete this message from your computer. ---------------------------------------------------------- ---------------------------------------------------------- IMPORTANT WARNING: This email (and any attachments) is only intended for the use of the person or entity to which it is addressed, and may contain information that is privileged and confidential. You, the recipient, are obligated to maintain it in a safe, secure and confidential manner. Unauthorized redisclosure or failure to maintain confidentiality may subject you to federal and state penalties. If you are not the recipient, please immediately notify us by return email, and delete this message from your computer. ---------------------------------------------------------- ```
 Re: [PyMOL] COVER image From: Roger Rowlett - 2007-11-20 21:08:05 ```Try the command "png filename.png, 1200, 1600, -1, 1" to create an output image 1200 pixels wide by 1600 pixels tall, raytraced. To disable raytracing, change the last argument to zero. Cheers, -- ------------------------------------------------------------------------ Roger S. Rowlett Professor Colgate University Presidential Scholar Department of Chemistry Colgate University 13 Oak Drive Hamilton, NY 13346 tel: (315)-228-7245 ofc: (315)-228-7395 fax: (315)-228-7935 email: rrowlett@... Vincent Chaptal wrote: > Hello, > > I am trying to make a picture for a cover and I am wondering how to make > a vertical image. > (Pymol creates horizontal images, and journal covers are vertical) > Is there a way to creates those vertical images other than turning the > image 90 degrees with the 'turn z, 90' command? > > thanks > vincent > > > ---------------------------------------------------------- > IMPORTANT WARNING: This email (and any attachments) is only intended for the use of the person or entity to which it is addressed, and may contain information that is privileged and confidential. You, the recipient, are obligated to maintain it in a safe, secure and confidential manner. Unauthorized redisclosure or failure to maintain confidentiality may subject you to federal and state penalties. If you are not the recipient, please immediately notify us by return email, and delete this message from your computer. > ---------------------------------------------------------- > > > ---------------------------------------------------------- > IMPORTANT WARNING: This email (and any attachments) is only intended for the use of the person or entity to which it is addressed, and may contain information that is privileged and confidential. You, the recipient, are obligated to maintain it in a safe, secure and confidential manner. Unauthorized redisclosure or failure to maintain confidentiality may subject you to federal and state penalties. If you are not the recipient, please immediately notify us by return email, and delete this message from your computer. > ---------------------------------------------------------- > > > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ > PyMOL-users mailing list > PyMOL-users@... > https://lists.sourceforge.net/lists/listinfo/pymol-users > ```
 Re: [PyMOL] COVER image From: William Scott - 2007-11-23 01:06:36 ```'turn z, 270' (sorry) On Tue, 20 Nov 2007, Vincent Chaptal wrote: Hello, I am trying to make a picture for a cover and I am wondering how to make a vertical image. (Pymol creates horizontal images, and journal covers are vertical) Is there a way to creates those vertical images other than turning the image 90 degrees with the 'turn z, 90' command? thanks vincent ---------------------------------------------------------- IMPORTANT WARNING: This email (and any attachments) is only intended for the use of the person or entity to which it is addressed, and may contain information that is privileged and confidential. You, the recipient, are obligated to maintain it in a safe, secure and confidential manner. Unauthorized redisclosure or failure to maintain confidentiality may subject you to federal and state penalties. If you are not the recipient, please immediately notify us by return email, and delete this message from your computer. ---------------------------------------------------------- ---------------------------------------------------------- IMPORTANT WARNING: This email (and any attachments) is only intended for the use of the person or entity to which it is addressed, and may contain information that is privileged and confidential. You, the recipient, are obligated to maintain it in a safe, secure and confidential manner. Unauthorized redisclosure or failure to maintain confidentiality may subject you to federal and state penalties. If you are not the recipient, please immediately notify us by return email, and delete this message from your computer. ---------------------------------------------------------- ------------------------------ ```