I have a modbus ,master slave at 10.0.0.21 with target 10.0.0.202(the PC) port 502
In Modbus Options, TCP settings, what should the IP address be
I tried 10.0.0.21 port 502 but there is no activity on the bus monitor
Hi. The IP of your PC it's also the IP of pymodslave Modbus TCP server, and should use it in Modbus options. Please check also your firewall (if your OS uses one).
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
I have set the corrrect IP 10.0.0.202 (my PC) and port (502)
However sometimes my master modbus is ablew to connedct sometimes not. It may work but after disconnecting it sytops working. strange. There is no fir\ewall blocking becauase I havwe tried with other software slave simulators with no problem
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
--- old+++ new@@ -1,4 +1,3 @@-
I have a modbus ,master slave at 10.0.0.21 with target 10.0.0.202(the PC) port 502
In Modbus Options, TCP settings, what should the IP address be
I tried 10.0.0.21 port 502 but there is no activity on the bus monitor
status: open --> closed
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi. The IP of your PC it's also the IP of pymodslave Modbus TCP server, and should use it in Modbus options. Please check also your firewall (if your OS uses one).
View and moderate all "tickets Discussion" comments posted by this user
Mark all as spam, and block user from posting to "Tickets"
I have set the corrrect IP 10.0.0.202 (my PC) and port (502)
However sometimes my master modbus is ablew to connedct sometimes not. It may work but after disconnecting it sytops working. strange. There is no fir\ewall blocking becauase I havwe tried with other software slave simulators with no problem
Diff: