Re: [PyDB2-discuss] pydb2 installation failure

[Dan S. <de...@gm...>]

For DB2 Version 8, you'll want the DB2 Application Development Client.

For DB2 9, you should only need the DB2 Driver for ODBC and CLI (a
much smaller download). If you still want the graphical tools, etc,
then the DB2 Client is what you want.

All downloads are available from
http://www-1.ibm.com/support/docview.wss?rs=71&uid=swg27007053

You'll probably need to adjust the paths slightly if you're building
against DB2 9.


On 01/05/07, Jeremy M. Jones <zan...@be...> wrote:
> When I start installing PyDB2, the first few messages are:
>
> """
> Your DB2 root is: /opt/IBM/db2/V8.1/
> WARNING: it seems that you did not install 'Application Development
> Kit'.
> Compilation may fail.
> """
>
> And then a bunch of error messages which seem consistent with a missing
> SDK.  I looked around for "DB2 Application Developer Kit" and "DB2 SDK",
> but am not having much luck turning anything up.  Does anyone have a
> current link where I can download the SDK?
>
> Thanks,
>
> - jmj
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> PyDB2-discuss mailing list
> PyD...@li...
> https://lists.sourceforge.net/lists/listinfo/pydb2-discuss
>


-- 
Dan Scott
Laurentian University