Hi,
looks like this is a 251 matrix....
with the cheap microcontroler arduino uno, it won't be possible.
here is a picture of mine that is a 88 matrix http://www.leboncoin.fr/consoles_jeux_video/844707039.htm?ca=18_s
don't hesitate to ask us questions!
c u
diego
Message du 24/08/15 à 12h05
De : "kristof verbrugge"
A : "[pydarts:discussion] "
Copie à :
Objet : [pydarts:discussion] electronic dart board
I've never seen this kind of board before. But it shouldn't be a 25*1
since the board require at least 62 possibilities + buttons
We definitly have to find a solution ;)
Cheers !
Le 24/08/2015 16:55, fx lefevre a écrit :
Hi,
looks like this is a 251 matrix....
with the cheap microcontroler arduino uno, it won't be possible.
here is a picture of mine that is a 88 matrix http://www.leboncoin.fr/consoles_jeux_video/844707039.htm?ca=18_s
don't hesitate to ask us questions!
c u
diego
> Message du 24/08/15 à 12h05
> De : "kristof verbrugge"
> A : "[pydarts:discussion] "
> Copie à :
> Objet : [pydarts:discussion] electronic dart board
>
>
> hi, first of all ty for creating this im looking for this for a
while :)
now i want to make it ! i have an electronic dart board but its
not the same 8x8 like u,
here is a photo,
https://www.dropbox.com/s/s8ikelxt54v1ax9/2015-08-22%2014.33.20.jpg?dl=0
https://www.dropbox.com/s/o32uvxukrkaf8dj/2015-08-22%2014.33.17.jpg?dl=0
whats the name of the dart board that u uses maby i find one like
that then im sure it works,
hope u can help me mate i realy want this to work :)
------------------------------------------------------------------------
> electronic dart board
<https://sourceforge.net/p/pydarts/discussion/general/thread/f7bbdadb/?limit=25#a067>
------------------------------------------------------------------------
> Sent from sourceforge.net because you indicated interest in
https://sourceforge.net/p/pydarts/discussion/general/
> To unsubscribe from further messages, please visit
https://sourceforge.net/auth/subscriptions/
you are right poilou
kristoff,
could you send us a picture of the top ?it is cut on the picture ...
maybe the top circuits join the bottom one on the top (of the picture) and going down on the side.
so it could be a 12*13 matrix?
you can follow the line of the top circuit to know where they are going?
what do you think poilou?
Message du 24/08/15 à 17h36
De : "lb"
A : "fx lefevre" , "[pydarts:discussion]"
Copie à : "kristof verbrugge"
Objet : Re: [pydarts:discussion] electronic dart board
Hi mates,
I've never seen this kind of board before. But it shouldn't be a 25*1
since the board require at least 62 possibilities + buttons
We definitly have to find a solution ;)
Cheers !
Le 24/08/2015 16:55, fx lefevre a écrit :
Hi,
looks like this is a 251 matrix....
with the cheap microcontroler arduino uno, it won't be possible.
here is a picture of mine that is a 88 matrix http://www.leboncoin.fr/consoles_jeux_video/844707039.htm?ca=18_s
don't hesitate to ask us questions!
c u
diego
Message du 24/08/15 à 12h05
De : "kristof verbrugge"
A : "[pydarts:discussion] "
Copie à :
Objet : [pydarts:discussion] electronic dart board
on the top there is nothing more its a circle, what u see on the right the top is the same,
yea i like the idea that u sell ready to go i would buy it for sure if its not to much money :)
i can buy one other cheap board and see if its there 8x8 matrix but its a waist of money if it aint so :'(
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
Hi !
Do not buy another board for now.
I think it could be a simple 12x13 "in a row" on the same slick. I really can't imagine something esle (unless you've got something else than 2 plastic leaves one above the other).
So the assembly should be exactly identical except that the two slicks explained in the wiki are from one block.
You should try first. It will cost your the price of an autocrimp (1€) and an arduino (10€) for tests.
For a ready to go board, for now, I can't imagine selling it less than a hundred euro, considering the time required to build it.
Good luck
Last edit: poilou 2015-08-25
If you would like to refer to this comment somewhere else in this project, copy and paste the following link:
hi, first of all ty for creating this im looking for this for a while :)
now i want to make it ! i have an electronic dart board but its not the same 8x8 like u,
here is a photo, https://www.dropbox.com/s/s8ikelxt54v1ax9/2015-08-22%2014.33.20.jpg?dl=0
https://www.dropbox.com/s/o32uvxukrkaf8dj/2015-08-22%2014.33.17.jpg?dl=0
whats the name of the dart board that u uses maby i find one like that then im sure it works,
hope u can help me mate i realy want this to work :)
Hi,
looks like this is a 251 matrix....
with the cheap microcontroler arduino uno, it won't be possible.
here is a picture of mine that is a 88 matrix
http://www.leboncoin.fr/consoles_jeux_video/844707039.htm?ca=18_s
don't hesitate to ask us questions!
c u
diego
Mode, hifi, maison,… J'achète malin. Je compare les prix avec Voila.fr http://shopping.voila.fr/
Hi mates,
I've never seen this kind of board before. But it shouldn't be a 25*1
since the board require at least 62 possibilities + buttons
We definitly have to find a solution ;)
Cheers !
Le 24/08/2015 16:55, fx lefevre a écrit :
you are right poilou
kristoff,
could you send us a picture of the top ?it is cut on the picture ...
maybe the top circuits join the bottom one on the top (of the picture) and going down on the side.
so it could be a 12*13 matrix?
you can follow the line of the top circuit to know where they are going?
what do you think poilou?
Mode, hifi, maison,… J'achète malin. Je compare les prix avec Voila.fr http://shopping.voila.fr/
I think we need more pics.
Hi mates,
I've never seen this kind of board before. But it shouldn't be a 25x1 since the board require at least 62 possibilities + buttons
We definitly have to find a solution ;)
Note that we plan to sell "ready to go" dart boards ! check http://pydarts.sourceforge.net for more info. It's coming soon.
Cheers !
on the top there is nothing more its a circle, what u see on the right the top is the same,
yea i like the idea that u sell ready to go i would buy it for sure if its not to much money :)
i can buy one other cheap board and see if its there 8x8 matrix but its a waist of money if it aint so :'(
Hi !
Do not buy another board for now.
I think it could be a simple 12x13 "in a row" on the same slick. I really can't imagine something esle (unless you've got something else than 2 plastic leaves one above the other).
So the assembly should be exactly identical except that the two slicks explained in the wiki are from one block.
You should try first. It will cost your the price of an autocrimp (1€) and an arduino (10€) for tests.
For a ready to go board, for now, I can't imagine selling it less than a hundred euro, considering the time required to build it.
Good luck
Last edit: poilou 2015-08-25