py2exe-users — Discussion of the py2exe package

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Thomas H. <th...@ct...>]

Am 23.09.2014 um 21:04 schrieb Sommer Detlef:
 >
 > That sounds good. Yes I will try it - so please send me a version and 
the steps how to install it .

Sending mail failed for whatever reasons, so I made the experimental
py2exe version 0.9.2.2a available via dropbox, it is in wheel format:

https://www.dropbox.com/s/8dtpw7h885tpo6w/py2exe-0.9.2.2a-py33.py34-none-any.whl?dl=0

You should probably uninstall the version you have now:
    pip uninstall py2exe

and install the new one from the wheel:

    pip install
<path_to_downloaded_file>\py2exe_0.9.2.2a-py33.py34.none-any.whl

I added a special hack for cffi which is needed by cryptography which
is needed by OpenSSL ;-)

Good luck and please report back if it works for your program.  I have
tested it with some example echo ssl-server/ssl-client scripts.

Thomas

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Sommer D. <Det...@ce...>]

 
That sounds good. Yes I will try it - so please send me a version and the steps how to install it .

Thank you very much 


> Am 23.09.2014 um 10:03 schrieb "Thomas Heller" <th...@ct...>:
> 
>> Am 15.09.2014 um 21:09 schrieb Thomas Heller:
>> Am 13.09.2014 20:42, schrieb Sommer Detlef:
>>> Ok, strange also here. I have the following files:
>> 
>> I will look into this issue when I have time ;-).
>> Might take a few days...
> 
> I have a solution now.  If you want I can mail you an experimental
> py2exe wheel so that you can try it out.
> 
> Thomas
> 
> 
> 
> ------------------------------------------------------------------------------
> Meet PCI DSS 3.0 Compliance Requirements with EventLog Analyzer
> Achieve PCI DSS 3.0 Compliant Status with Out-of-the-box PCI DSS Reports
> Are you Audit-Ready for PCI DSS 3.0 Compliance? Download White paper
> Comply to PCI DSS 3.0 Requirement 10 and 11.5 with EventLog Analyzer
> http://pubads.g.doubleclick.net/gampad/clk?id=154622311&iu=/4140/ostg.clktrk
> _______________________________________________
> Py2exe-users mailing list
> Py2...@li...
> https://lists.sourceforge.net/lists/listinfo/py2exe-users

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Thomas H. <th...@ct...>]

Am 15.09.2014 um 21:09 schrieb Thomas Heller:
> Am 13.09.2014 20:42, schrieb Sommer Detlef:
>> Ok, strange also here. I have the following files:
>
> I will look into this issue when I have time ;-).
> Might take a few days...

I have a solution now.  If you want I can mail you an experimental
py2exe wheel so that you can try it out.

Thomas

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Thomas H. <th...@ct...>]

Am 17.09.2014 08:39, schrieb Sommer Detlef:
> [Thomas Heller]
>> I will look into this issue when I have time ;-).
>> Might take a few days...
>
> This would be nice - the problem drives me crazy at the moment, not
> possible to get any program using SSL to work.
>
> Is there anything I can help ?

Probably not.

I have looked into this and there is no easy solution.  The problem is
that cryptography is using cffi and cffi does not work with zipimport.
(It does not find the extension modules, instead it would try to build 
them at runtime.)

I try to find a solution but it will take more time.

Thomas

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Sommer D. <Det...@ce...>]

> Am 13.09.2014 20:42, schrieb Sommer Detlef:
>> Ok, strange also here. I have the following files:

>I will look into this issue when I have time ;-).
>Might take a few days...

This would be nice - the problem drives me crazy at the moment, not
possible to get any program using SSL to work.

Is there anything I can help ?

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Thomas H. <th...@ct...>]

Am 13.09.2014 20:42, schrieb Sommer Detlef:
> Ok, strange also here. I have the following files:

I will look into this issue when I have time ;-).
Might take a few days...

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Sommer D. <Det...@ce...>]

 

Ok, strange also here. I have the following files:

 

--- test.py ---

from OpenSSL import SSL

---------------

 

--- test_setup.py --- 

#!/usr/bin/python3

# -*- coding: utf-8 -*-

 

from distutils.core import setup

import py2exe

 

class Target(object):

    '''Target is the baseclass for all executables that are created.

    It defines properties that are shared by all of them.

    '''

    def __init__(self, **kw):

        self.__dict__.update(kw)

 

        # the VersionInfo resource, uncomment and fill in those items

        # that make sense:

        

        # The 'version' attribute MUST be defined, otherwise no
versioninfo will be built:

        # self.version = "1.0"

        

        self.company_name = "Test"

        self.copyright = "Copyright Test (c) 2014"

        # self.legal_copyright = "Copyright Company Name (c) 2013"

        # self.legal_trademark = ""

        # self.product_version = "1.0.0.0"

        self.product_name = "test FTP server"

 

        # self.private_build = "foo"

        # self.special_build = "bar"

 

    def copy(self):

        return Target(**self.__dict__)

 

    def __setitem__(self, name, value):

        self.__dict__[name] = value

 

test_ftpd = Target(

    # We can extend or override the VersionInfo of the base class:

    version = "1.0",

    # file_description = "File Description",

    # comments = "Some Comments",

    # internal_name = "spam",

 

    script="test.py", # path of the main script

 

    # Allows to specify the basename of the executable, if different
from 'test'

    # dest_base = "test",

 

    # Icon resources:[(resource_id, path to .ico file), ...]

    # icon_resources=[(1, r"test.ico")]

    )

 

py2exe_options = dict(

    packages = [],

    #packages = ['cryptography.hazmat.bindings.openssl', 'pycparser',
'distutils.command', 'OpenSSL', 'pyftpdlib'],

    #includes = ['site'],

##    excludes = "tof_specials Tkinter".split(),

##    ignores = "dotblas gnosis.xml.pickle.parsers._cexpat
mx.DateTime".split(),

##    dll_excludes = "MSVCP90.dll mswsock.dll powrprof.dll".split(),

    optimize=2,

    compressed=True, # uncompressed may or may not have a faster startup

    bundle_files=0,

    dist_dir='dist_test',

    )

 

setup(name="name",

      # console based executables

      console=[test_ftpd],

 

      # py2exe options

      zipfile=None,

      options={"py2exe": py2exe_options},

      )

------------------------

 

When I run -

 

-> build_exe test.py -> I get:

C:\XXX\dist\test.exe

Traceback (most recent call last):

  File "test.py", line 1, in <module>

    from OpenSSL import SSL

  File "C:\Python34\lib\site-packages\OpenSSL\__init__.py", line 8, in
<module>

    from OpenSSL import rand, crypto, SSL

  File "C:\Python34\lib\site-packages\OpenSSL\rand.py", line 11, in
<module>

    from OpenSSL._util import (

  File "C:\Python34\lib\site-packages\OpenSSL\_util.py", line 4, in
<module>

    binding = Binding()

  File
"C:\Python34\lib\site-packages\cryptography\hazmat\bindings\openssl\bind
ing.py", line 89, in __init__

    self._ensure_ffi_initialized()

  File
"C:\Python34\lib\site-packages\cryptography\hazmat\bindings\openssl\bind
ing.py", line 109, in _ensure_ffi_initialized

    libraries=libraries,

  File
"C:\Python34\lib\site-packages\cryptography\hazmat\bindings\utils.py",
line 47, in build_ffi

    __import__(module_name)

ImportError: No module named 'cryptography.hazmat.bindings.openssl.aes'

 

-> python test_setup.py py2exe -> I get:

C:\XXX\dist_test\test.exe

Traceback (most recent call last):

  File "test.py", line 1, in <module>

    from OpenSSL import SSL

  File "C:\Python34\lib\site-packages\zipextimporter.py", line 116, in
load_module

    raise zipimport.ZipImportError("can't find module %s" % fullname)

zipimport.ZipImportError: can't find module OpenSSL

 

Re: [Py2exe-users] py2exe, python 3 and OpenSSL ...

[Thomas H. <th...@ct...>]

Am 13.09.2014 13:36, schrieb Sommer Detlef:
> Hello,
>
> currently I have the following problem.I have a .py file that contains
> only the following line:
>
> from OpenSSL import SSL
>
> When I run it with python, no problem. When I compile, no problem. But
> when I start the exe I get the following error:
>
>    File "test.py", line 1, in <module>
>    File "C:\Python34\lib\site-packages\zipextimporter.py", line 116, in
> load_module
>      raise zipimport.ZipImportError("can't find module %s" % fullname)
> zipimport.ZipImportError: can't find module OpenSSL
>
> My environment is:
> Windows 7 64 Bit
> python 3.4 64 Bit
> pyOpenSLL installed with pip
> py2exe installed with pip

How did you build the exe?  When I try it (python -m py2exe ssl.py) I
get this traceback when running the exe:

Traceback (most recent call last):
   File "ssl.py", line 1, in <module>
     from OpenSSL import SSL
   File 
"c:\Users\thomas\devel\temp\lib\site-packages\OpenSSL\__init__.py", line 
8, in <module>
     from OpenSSL import rand, crypto, SSL
   File "c:\Users\thomas\devel\temp\lib\site-packages\OpenSSL\rand.py", 
line 11, in <module>
     from OpenSSL._util import (
   File "c:\Users\thomas\devel\temp\lib\site-packages\OpenSSL\_util.py", 
line 4, in <module>
     binding = Binding()
   File 
"c:\Users\thomas\devel\temp\lib\site-packages\cryptography\hazmat\bindings\openssl\binding.py", 
line 89, in __init__
     self._ensure_ffi_initialized()
   File 
"c:\Users\thomas\devel\temp\lib\site-packages\cryptography\hazmat\bindings\openssl\binding.py", 
line 109, in _ensure_ffi_initialized
     libraries=libraries,
   File 
"c:\Users\thomas\devel\temp\lib\site-packages\cryptography\hazmat\bindings\utils.py", 
line 47, in build_ffi
     __import__(module_name)
ImportError: No module named 'cryptography.hazmat.bindings.openssl.aes'

I have to find out why 'cryptography.hazmat.bindings.openssl.aes' is not 
found but why do you get a totally differnt error?

Thomas

[Py2exe-users] py2exe, python 3 and OpenSSL ...

[Sommer D. <Det...@ce...>]

Hello,

currently I have the following problem.I have a .py file that contains
only the following line:

from OpenSSL import SSL

When I run it with python, no problem. When I compile, no problem. But
when I start the exe I get the following error:

  File "test.py", line 1, in <module>
  File "C:\Python34\lib\site-packages\zipextimporter.py", line 116, in
load_module
    raise zipimport.ZipImportError("can't find module %s" % fullname)
zipimport.ZipImportError: can't find module OpenSSL

My environment is:
Windows 7 64 Bit
python 3.4 64 Bit
pyOpenSLL installed with pip
py2exe installed with pip

Any ideas ?

[Py2exe-users] py2exe, python 3 and OpenSSL ...

[Sommer D. <Det...@ce...>]

Hello,

currently I have the following problem.I have a .py file that contains
only the following line:

from OpenSSL import SSL

When I run it with python, no problem. When I compile, no problem. But
when I start the exe I get the following error:

  File "test.py", line 1, in <module>
  File "C:\Python34\lib\site-packages\zipextimporter.py", line 116, in
load_module
    raise zipimport.ZipImportError("can't find module %s" % fullname)
zipimport.ZipImportError: can't find module OpenSSL

My environment is:
Windows 7 64 Bit
python 3.4 64 Bit
pyOpenSLL installed with pip
py2exe installed with pip

Any ideas ?

Re: [Py2exe-users] py2exe for Python 3

[Werner <wer...@gm...>]

Hi Thomas,

On 9/12/2014 19:16, Thomas Heller wrote:
> Am 27.08.2014 10:57, schrieb Werner:
>> Hi Thomas,
>>
>> On 5/9/2014 20:12, Thomas Heller wrote:
>>> Finally there is py2exe for Python3!
>>
>> Do you have any plans of supporting Py 2.7.x with 0.9?
>
> Not really.  Which features of py2exe 0.9 do you miss in the py27 version?
The egg support would be nice to have and for new things the 'easy start'.

But on second thought these are things one can easily live without.
>
> Thomas
> (Just back from holidays)
Hope you had a good one.

Werner

Re: [Py2exe-users] py2exe for Python 3

[Thomas H. <th...@ct...>]

Am 27.08.2014 10:57, schrieb Werner:
> Hi Thomas,
>
> On 5/9/2014 20:12, Thomas Heller wrote:
>> Finally there is py2exe for Python3!
>
> Do you have any plans of supporting Py 2.7.x with 0.9?

Not really.  Which features of py2exe 0.9 do you miss in the py27 version?

Thomas
(Just back from holidays)

Re: [Py2exe-users] Is py2exe the right tool?

[Fahlgren, E. <eri...@sm...>]

Py2exe is what I use to package up code with most of those packages (I don't use MatPlotlib, home-brew plotting in wx+vtk instead).  Works well for me using Py 2.7 x64.  SciPy gives you a bit of grief with it's bizarre internal import schemes, so you have to manually include such things as scipy.signal and the blas libraries.

-----Original Message-----
From: Virgil Stokes [mailto:vs...@it...] 
Sent: Thursday, September 11, 2014 09:21
To: py2...@li...
Subject: [Py2exe-users] Is py2exe the right tool?

I have written a suite of programs that run with Python 2.7 and use the latest releases of NumPy, wxPython, SciPy and MatPlotlib on a Windows 7 (64-bit) platform. Currently I am running them using WingIDE (32-bit) which work fine for me.

I plan to give the computer that contains this suite of programs to a student and before I do that I would like to create *.exe files for each of these which will be executed on the same computer that I used to develop them.

Is py2exe the right tool for creating these *.exe files? If no, then what
tool(s) should I use for this task?


------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
Py2exe-users mailing list
Py2...@li...
https://lists.sourceforge.net/lists/listinfo/py2exe-users

[Py2exe-users] Is py2exe the right tool?

[Virgil S. <vs...@it...>]

I have written a suite of programs that run with Python 2.7 and use the latest 
releases of NumPy, wxPython, SciPy and MatPlotlib on a Windows 7 (64-bit) 
platform. Currently I am running them using WingIDE (32-bit) which work fine for 
me.

I plan to give the computer that contains this suite of programs to a student 
and before I do that I would like to create *.exe files for each of these which 
will be executed on the same computer that I used to develop them.

Is py2exe the right tool for creating these *.exe files? If no, then what 
tool(s) should I use for this task?

Re: [Py2exe-users] proper setup.py file for my python project

[Werner <wer...@gm...>]

Hi Rajan,

  On 9/4/2014 8:20, Rajan wrote:
> Hi,
>
> I'm not able to create a proper setup.py for my project. I'm using
> python-pptx and xlsxwriter libraries for my project.

errors with py2exe'd apps like "cannot import name 'something'" mostly 
point to problems where py2exe can't figure out what needs to be included.

A quick google gave me this link:
http://stackoverflow.com/questions/5308760/py2exe-lxml-woes

An alternative solution might be to add 'lxml' to the 'packages' option.

Werner

Re: [Py2exe-users] py2exe for Python 3

[Werner <wer...@gm...>]

Hi Thomas,

On 5/9/2014 20:12, Thomas Heller wrote:
> Finally there is py2exe for Python3!

Do you have any plans of supporting Py 2.7.x with 0.9?

Werner

Re: [Py2exe-users] dist directory is empty

[inq1ltd <in...@in...>]

Thanks for the suggestions,

I found that the this program will compile as expected if I eliminate one 
import of a legitimate file.

I write:
import INQTEXTW
and I get an empty directory.

If I leave it out everything works.

I am going to break this file into parts and test each one until I find the 
problem.

using raw_input works if everything is running as expected but the setup was 
crashing before it got to it.

I had trouble with 
python setup.py py2exe > compileLog.txt
I don't know why but I did use:

sys.stdout = open( compileLog.txt, 'w') 
from inside, at the top, of setup, with success. However it did not show the 
error msg.

After I find the problem with this import I'll post the results.

thanks for the help,
jd






On Wednesday, August 13, 2014 05:35:04 PM Fox, Michael K wrote:


In order to see the output from py2exe open a Windoze "Command Prompt" window.  
Use the cd command to navigate to the directory where your source code is 
written then type
    python setup.py py2exe
The window will stay open and you can see the output there.   Another helpful 
thing to do is redirect the output to a file so you can scroll through the 
output.   You can do that like so:
    python setup.py py2exe > compileLog.txt
The file named compileLog.txt will be created in the directory with your python 
source code.  You can open it and scroll through the output messages from 
py2exe.
*From:* inq1ltd [mailto:in...@in...] 

*Sent:* Wednesday, August 13, 2014 10:05 AM

*To:* Daniel Casper

*Cc:* py2...@li...

*Subject:* Re: [Py2exe-users] dist directory is empty
 
Thanks Daniel,

I've been so disparate over this my modules and setup is loaded in the same 
directory that python lives. 
My entry is: 
python setup.py py2exe

Without the output file I can see the full output in the window but the window 
closes before I can read the last line. I believe the last line is an error 
message that I can't read

jd












On Wednesday, August 13, 2014 10:50:29 AM Daniel Casper wrote:
JD,
You should be able to run your setup script from a command prompt so that you 
can view any output like this:
c:\path\to\python.exe setup.py py2exe
That should let you see errors and potentially diagnose further.  We'll need 
that information in order to try to assist as well.
--Daniel

Re: [Py2exe-users] dist directory is empty

[Fox, M. K <mic...@bo...>]

In order to see the output from py2exe open a Windoze "Command Prompt" window.  Use the cd command to navigate to the directory where your source code is written then type
    python setup.py py2exe
The window will stay open and you can see the output there.   Another helpful thing to do is redirect the output to a file so you can scroll through the output.   You can do that like so:
    python setup.py py2exe > compileLog.txt
The file named compileLog.txt will be created in the directory with your python source code.  You can open it and scroll through the output messages from py2exe.
From: inq1ltd [mailto:in...@in...]
Sent: Wednesday, August 13, 2014 10:05 AM
To: Daniel Casper
Cc: py2...@li...
Subject: Re: [Py2exe-users] dist directory is empty


Thanks Daniel,



I've been so disparate over this my modules and setup is loaded in the same directory that python lives.

My entry is:

python setup.py py2exe



Without the output file I can see the full output in the window but the window closes before I can read the last line. I believe the last line is an error message that I can't read



jd

























On Wednesday, August 13, 2014 10:50:29 AM Daniel Casper wrote:

JD,

You should be able to run your setup script from a command prompt so that you can view any output like this:

c:\path\to\python.exe setup.py py2exe

That should let you see errors and potentially diagnose further.  We'll need that information in order to try to assist as well.

--Daniel



On Wed, Aug 13, 2014 at 10:42 AM, inq1ltd <in...@in...<mailto:in...@in...>> wrote:

py2exe help,

I'm trying to compile my program with
py2exe-0.6.9 0n py2.7 and I'm getting an
empty dist directory.

In the past I haven't had any problems
completing this or other projects. However,
in the last year I modified some files and
added modules and files to this same project
and after running setup, I'm getting an empty
dist directory.

If I create a sys.stdout file within the
setup, the output file shows the copying of
my files to the lib and it creates the dist
directory. The last line it shows is:

*** searching for required modules **

At this time the output file is closed.
Everything is now displayed on screen until
the setup finishes and the window closes.

I believe there is an error message displayed
on the last line, but I can't read it.

So, short of knowing what the possibilities
are that can cause this problem I want to
know if there is a way to stop the setup from
closing the window when it finishes so I can
read the last line?

I can create a simple exe program using a few
files from this project by eliminating the
importing of other modules,  but there are 93
files for the entire project.

I would appreciate any help,
jd

















------------------------------------------------------------------------------
_______________________________________________
Py2exe-users mailing list
Py2...@li...<mailto:Py2...@li...>
https://lists.sourceforge.net/lists/listinfo/py2exe-users

Re: [Py2exe-users] dist directory is empty

[Daniel C. <dan...@gm...>]

Odd - most times running python like that shouldn't launch a new window.
In any event, I'd try adding a call to raw_input() at the end of your
setup.py file - that might help you keep the window open so that you can
review its contents.

If it doesn't, my guess is that the call to setup() is taking causing an
exception.  Can you show us the contents of your setup.py?  You can also
try wrapping the call to setup() in a try / except block, then use
raw_input() to pause execution after printing the traceback.

--Daniel


On Wed, Aug 13, 2014 at 11:04 AM, inq1ltd <in...@in...> wrote:

>  Thanks Daniel,
>
>
>
> I've been so disparate over this my modules and setup is loaded in the
> same directory that python lives.
>
> My entry is:
>
> python setup.py py2exe
>
>
>
> Without the output file I can see the full output in the window but the
> window closes before I can read the last line. I believe the last line is
> an error message that I can't read
>
>
>
> jd
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Wednesday, August 13, 2014 10:50:29 AM Daniel Casper wrote:
>
> JD,
>
> You should be able to run your setup script from a command prompt so that
> you can view any output like this:
>
> c:\path\to\python.exe setup.py py2exe
>
> That should let you see errors and potentially diagnose further.  We'll
> need that information in order to try to assist as well.
>
> --Daniel
>
>
>
> On Wed, Aug 13, 2014 at 10:42 AM, inq1ltd <in...@in...> wrote:
>
> py2exe help,
>
> I'm trying to compile my program with
> py2exe-0.6.9 0n py2.7 and I'm getting an
> empty dist directory.
>
> In the past I haven't had any problems
> completing this or other projects. However,
> in the last year I modified some files and
> added modules and files to this same project
> and after running setup, I'm getting an empty
> dist directory.
>
> If I create a sys.stdout file within the
> setup, the output file shows the copying of
> my files to the lib and it creates the dist
> directory. The last line it shows is:
>
> *** searching for required modules **
>
> At this time the output file is closed.
> Everything is now displayed on screen until
> the setup finishes and the window closes.
>
> I believe there is an error message displayed
> on the last line, but I can't read it.
>
> So, short of knowing what the possibilities
> are that can cause this problem I want to
> know if there is a way to stop the setup from
> closing the window when it finishes so I can
> read the last line?
>
> I can create a simple exe program using a few
> files from this project by eliminating the
> importing of other modules,  but there are 93
> files for the entire project.
>
> I would appreciate any help,
> jd
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Py2exe-users mailing list
> Py2...@li...
> https://lists.sourceforge.net/lists/listinfo/py2exe-users
>
>
>
>
>

Re: [Py2exe-users] dist directory is empty

[inq1ltd <in...@in...>]

Thanks Daniel,

I've been so disparate over this my modules and setup is loaded in the same 
directory that python lives.  
My entry is:  
python setup.py py2exe

Without the output file I can see the full output in the window but the window 
closes before I can read the last line. I believe the last line is an error 
message that I can't read

jd












On Wednesday, August 13, 2014 10:50:29 AM Daniel Casper wrote:


JD,



You should be able to run your setup script from a command prompt so that you 
can view any output like this:



c:\path\to\python.exe setup.py py2exe



That should let you see errors and potentially diagnose further.  We'll need 
that information in order to try to assist as well.



--Daniel




On Wed, Aug 13, 2014 at 10:42 AM, inq1ltd <in...@in...[1]> wrote:


py2exe help,

I'm trying to compile my program withpy2exe-0.6.9 0n py2.7 and I'm getting 
anempty dist directory.

In the past I haven't had any problemscompleting this or other projects. 
However,in the last year I modified some files andadded modules and files to 
this same projectand after running setup, I'm getting an emptydist directory.

If I create a sys.stdout file within thesetup, the output file shows the 
copying ofmy files to the lib and it creates the distdirectory. The last line 
it shows is:

*** searching for required modules **

At this time the output file is closed.Everything is now displayed on screen 
untilthe setup finishes and the window closes.

I believe there is an error message displayedon the last line, but I can't read 
it.

So, short of knowing what the possibilitiesare that can cause this problem I 
want toknow if there is a way to stop the setup fromclosing the window when it 
finishes so I canread the last line?

I can create a simple exe program using a fewfiles from this project by 
eliminating theimporting of other modules,  but there are 93files for the 
entire project.

I would appreciate any help,jd

Re: [Py2exe-users] dist directory is empty

[Daniel C. <dan...@gm...>]

JD,

You should be able to run your setup script from a command prompt so that
you can view any output like this:

c:\path\to\python.exe setup.py py2exe

That should let you see errors and potentially diagnose further.  We'll
need that information in order to try to assist as well.

--Daniel


On Wed, Aug 13, 2014 at 10:42 AM, inq1ltd <in...@in...> wrote:

> py2exe help,
>
> I'm trying to compile my program with
> py2exe-0.6.9 0n py2.7 and I'm getting an
> empty dist directory.
>
> In the past I haven't had any problems
> completing this or other projects. However,
> in the last year I modified some files and
> added modules and files to this same project
> and after running setup, I'm getting an empty
> dist directory.
>
> If I create a sys.stdout file within the
> setup, the output file shows the copying of
> my files to the lib and it creates the dist
> directory. The last line it shows is:
>
> *** searching for required modules **
>
> At this time the output file is closed.
> Everything is now displayed on screen until
> the setup finishes and the window closes.
>
> I believe there is an error message displayed
> on the last line, but I can't read it.
>
> So, short of knowing what the possibilities
> are that can cause this problem I want to
> know if there is a way to stop the setup from
> closing the window when it finishes so I can
> read the last line?
>
> I can create a simple exe program using a few
> files from this project by eliminating the
> importing of other modules,  but there are 93
> files for the entire project.
>
> I would appreciate any help,
> jd
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------------------------------------------------
> _______________________________________________
> Py2exe-users mailing list
> Py2...@li...
> https://lists.sourceforge.net/lists/listinfo/py2exe-users
>

[Py2exe-users] dist directory is empty

[inq1ltd <in...@in...>]

py2exe help,

I'm trying to compile my program with 
py2exe-0.6.9 0n py2.7 and I'm getting an 
empty dist directory.

In the past I haven't had any problems 
completing this or other projects. However, 
in the last year I modified some files and 
added modules and files to this same project 
and after running setup, I'm getting an empty 
dist directory.  

If I create a sys.stdout file within the 
setup, the output file shows the copying of 
my files to the lib and it creates the dist 
directory. The last line it shows is:
 
*** searching for required modules **

At this time the output file is closed.  
Everything is now displayed on screen until 
the setup finishes and the window closes.

I believe there is an error message displayed 
on the last line, but I can't read it. 

So, short of knowing what the possibilities 
are that can cause this problem I want to 
know if there is a way to stop the setup from 
closing the window when it finishes so I can 
read the last line?

I can create a simple exe program using a few 
files from this project by eliminating the 
importing of other modules,  but there are 93  
files for the entire project.

I would appreciate any help,
jd















  

Re: [Py2exe-users] Issues with the latest wx Release.

[Daniel C. <dan...@gm...>]

As a followup to this issue - I haven't yet found an explanation for why
wxPython 3.0 has problems, but I can confirm that the issue is not present
when using wxPython 2.9.5.

--Daniel


On Mon, Jul 28, 2014 at 11:22 AM, Daniel Casper <dan...@gm...> wrote:

> I've recently updated to the latest wxPython release, 3.0, to gain access
> to a Utility Class for FontInfo that doesn't require the creation of a
> wx.App instance.  Seemingly works fine and well, but the new wxPython
> version doesn't appear to be compatible with bundle_files 2.  bundle_files
> 3 works as expected, so I'm hoping there's a workaround, or some other way
> to approach it.
>
> If I'm running my compiled UI with bundle_files 2 with PY2EXE_VERBOSE set,
> The final lines of my output look like this:
>
> # zipimport: zlib available
> # zipimport: zlib available
> # found unicodedata.pyd in zipfile j:\RpmV\RPM UI - V2\ui_x86\common.bin
> # zipimport: zlib available
> import unicodedata # loaded from zipfile j:\RpmV\RPM UI -
> V2\ui_x86\common.bin\unicodedata.pyd
> import stringprep # loaded from Zip j:\RpmV\RPM UI -
> V2\ui_x86\common.bin\stringprep.pyo
> import array # builtin
> import encodings.idna # loaded from Zip j:\RpmV\RPM UI -
> V2\ui_x86\common.bin\encodings\idna.pyo
> # zipimport: zlib available
> import encodings.ascii # loaded from Zip j:\RpmV\RPM UI -
> V2\ui_x86\common.bin\encodings\ascii.pyo
>
> And then my application faults.  (Not Terribly Useful) Relevant
> information from the Windows Event Logs:
>
> Faulting application name: rpmguic.exe, version: 0.0.0.0, time stamp:
> 0x52936cf5
> Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
> Exception code: 0xc0000005
> Fault offset: 0x03159602
> Faulting process id: 0x16dc
> Faulting application start time: 0x01cfaa87c43955db
> Faulting application path: j:\RpmV\RPM UI - V2\ui_x86\rpmguic.exe
> Faulting module path: unknown
> Report Id: 040d6cbd-167b-11e4-8b60-0090f5d3e3ac
>
> I'm intending to test with the latest py2exe as well.  If anything changes
> in my results I'll follow up.
>
> Thanks in advance for any suggestions,
> --Daniel
>

[Py2exe-users] Issues with the latest wx Release.

[Daniel C. <dan...@gm...>]

I've recently updated to the latest wxPython release, 3.0, to gain access
to a Utility Class for FontInfo that doesn't require the creation of a
wx.App instance.  Seemingly works fine and well, but the new wxPython
version doesn't appear to be compatible with bundle_files 2.  bundle_files
3 works as expected, so I'm hoping there's a workaround, or some other way
to approach it.

If I'm running my compiled UI with bundle_files 2 with PY2EXE_VERBOSE set,
The final lines of my output look like this:

# zipimport: zlib available
# zipimport: zlib available
# found unicodedata.pyd in zipfile j:\RpmV\RPM UI - V2\ui_x86\common.bin
# zipimport: zlib available
import unicodedata # loaded from zipfile j:\RpmV\RPM UI -
V2\ui_x86\common.bin\unicodedata.pyd
import stringprep # loaded from Zip j:\RpmV\RPM UI -
V2\ui_x86\common.bin\stringprep.pyo
import array # builtin
import encodings.idna # loaded from Zip j:\RpmV\RPM UI -
V2\ui_x86\common.bin\encodings\idna.pyo
# zipimport: zlib available
import encodings.ascii # loaded from Zip j:\RpmV\RPM UI -
V2\ui_x86\common.bin\encodings\ascii.pyo

And then my application faults.  (Not Terribly Useful) Relevant information
from the Windows Event Logs:

Faulting application name: rpmguic.exe, version: 0.0.0.0, time stamp:
0x52936cf5
Faulting module name: unknown, version: 0.0.0.0, time stamp: 0x00000000
Exception code: 0xc0000005
Fault offset: 0x03159602
Faulting process id: 0x16dc
Faulting application start time: 0x01cfaa87c43955db
Faulting application path: j:\RpmV\RPM UI - V2\ui_x86\rpmguic.exe
Faulting module path: unknown
Report Id: 040d6cbd-167b-11e4-8b60-0090f5d3e3ac

I'm intending to test with the latest py2exe as well.  If anything changes
in my results I'll follow up.

Thanks in advance for any suggestions,
--Daniel

Re: [Py2exe-users] Interesting Stack Overflow py2exe Inquiry

[<jae...@gm...>]

_______________________________________________
Py2exe-users mailing list
Py2...@li...
https://lists.sourceforge.net/lists/listinfo/py2exe-users