RE: [pxes-devel] PXES fails at second DHCP
Brought to you by:
pxesadm,
software2x
From: Daniel L. <danl@AuroraMicro.com> - 2003-03-28 19:01:19
|
I think i know why your having this problem..i had the same problem = here, using the same SIS900 NIC card, i found the problem to be the = Linux driver for the SIS900 NIC. =20 I had found a work around for the problem, i found that if i used a Hub = or managed switch were i could drop the speed to 10Megs than the SIS900 = Nic would work. For some reason the linux driver for SIS will not work = correctly at 100megs with all Hubs, others have no problem...I had this = problem with my Cisco switch, but it worked correctly with my DLink = Switch. =20 Easy way to fix, drop in an old 10 Meg hub and connect the SIS900 nic to = it. you should now get passed the second DHCP request. Thanks Daniel Lowe This transmission may be privileged and may contain confidential = information intended only for the person(s) to whom it is addressed. Any = other distribution, re-transmission, copying or disclosure is strictly prohibited. If you have received this transmission in error, = please notify us immediately and delete this message from your system = without reading or copying it. |